EOS 3D Printing
EOS M 300-4 – Industrial 3D printer for serial production of metal parts
updated
In metal 3D printing, supports are considered a necessary evil. They act as heat sinks to draw heat away from the melt pool, anchor parts to the build plate to prevent distortion from internal stresses, and maintain the part's position during printing while absorbing recoating forces. However, the downside is that every cubic millimeter of printed support structures brings various challenges and complexity. Designing and optimizing support structures takes time, adds to the printing duration, results in wasted materials, often requires manual labor or CNC machining for removal, and leaves supporting marks on the part's surface, necessitating post-machining. Printing entirely without support structures proves to be a formidable challenge in metal 3D printing. In EOS's metal 3D printing, the laser is the primary source of energy deployed into the powder bed. The platform or powder bed is pre-heated to a maximum of 200°C, creating a significant thermal delta between the liquidus state and powder, inducing stresses during material shrinkage after cooling.
The exposure parameters and the printing system itself can lead to an inhomogeneous remolten surface, acting as a catch for recoating forces that may rip the built structure from the powder bed. The innovative team at EOS addressed these challenges by working on multi-exposure parameters and strategy optimization, individually tackling the effects mentioned above, emphasizing the need for support structures to make the lives of our customers easier, and aiming to bring the cost per part down significantly.
Significant reductions in laser-to-laser time have been achieved, facilitated by the system's streamlined process, requiring only the replenishment of fresh powder. This advancement enables swift restarts, minimizing downtime and maximizing productivity.
Cost reductions are attainable through the elimination of the need for part separation from the building platform. Previously, operations such as band saw or wire EDM were required, contributing to both time and material waste. Additionally, the need to refurbish the platform by grinding it flat again is rendered unnecessary, further saving on maintenance costs. With the elimination of the task of replacing the building platform inside the machine, time efficiencies are optimized, allowing for seamless workflow continuity.
In conjunction with EOS's proprietary Smart Fusion technology for optimized heat management, a job could be printed entirely “free-floating” in the building process chamber without a single support. The "micro impeller" was chosen as an ideal reference geometry due to relatively low stresses during printing, making it a perfect showcase. Not only can it be spun like a top, adding a fun factor, but the working principles of these improvements can be applied to various geometries and applications, provided the part can be oriented starting from a relatively small section in the X/Y-plane.
This principle can be implemented across different industries where applications meet the above mentioned criteria. One can envision its application in automotive superchargers, for instance, with impellers.
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
To learn more about the research being performed at Auburn University that is shaping the future of AM, Host Fabian Alefeld speaks with a distinguished AM figure, Nima Shamsaei. Nima is a Philpott-West Point Stevens professor at Auburn University and Director of the National Center for Additive Manufacturing Excellence (NCAME). At NCAME, Nima and his team are at the forefront of research and technology and are actively studying the fracture and fatigue behavior of AM materials. In addition, a joint project with the US government and Auburn University is supporting manufacturers to create components for NASA.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[1:39] An interest in mechanical properties led Nima from automotive to pushing the AM envelope with NASA.
[6:33] How Nima detects the fatigue behavior of additive materials.
[9:31] Three challenges of collecting and leveraging additive material data.
[16:19] When cost is not an issue, leveraging additive design maximizes its full potential.
[19:48] Part classifications are based on qualification complexities and the consequence of failure.
[23:21] A joint effort by the US government, Auburn University, and NASA support manufacturers to create parts NASA can use.
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Today, host Fabian Alefeld speaks with the co-founder and CEO of 1000 Kelvin, Omar Fergani. 1000 Kelvin is a company at the forefront of the AI-driven revolution in the AM industry. Omar explains the depths of the innovation driven by 1000 Kelvin, the pivotal role that AI plays in industrial 3D printing, and how the AMAIZE co-pilot helps engineers to reduce design time and engineer onboarding.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[1:18] 1000 Kelvin’s mission and how it plans to solve additive manufacturing’s biggest challenges.
[6:26] How implementing a materials processing discipline will move additive manufacturing to serial production.
[10:41] 1000 Kelvin’s AMAIZE is a co-pilot engineering tool and thermal management platform.
[12:58] On a macro level, AMAIZE helps to onboard new engineers.
[19:45] How the co-pilot integrates into the design workflow.
[22:09] Business use cases support the growth of AM spare parts and fortify the supply chain.
[26:03] The limitations and advantages of AI in AM.
Resource Link:
Omar Fergani: linkedin.com/in/omar-fergani
1000 Kelvin: 1000kelvin.com
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
To find out, Host Fabian Alefeld ventures into the final frontier with a space roundtable with an all-star panel, featuring Paul Gradl, Principal Engineer at NASA, Myles Keefer, Manager of Additive Manufacturing at Rocket Lab, Eliana Fu, Industry Manager of Aerospace & Medical at TRUMPF, and Advenit Makaya, Advanced Manufacturing Engineer at the European Space Research and Technology Centre of the European Space Agency.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key takeaways:
[2:28] Additive manufacturing is a critical component of space exploration.
[5:50] Common additive manufacturing challenges in space applications.
[10:57] Additive manufacturing adoption in Europe.
[13:28] Challenges of materials development today, and in the future.
[26:16] How to leverage additive manufacturing for new innovative projects.
[40:30] Machine manufacturer pain points and challenges.
[51:48] What is driving additive innovation in Europe?
[1:00:17] How to inspire a new generation of manufacturing engineers.
Resource Links:
Rocket Lab: rocketlabusa.com
TRUMPF: trumpf.com
SpaceX: spacex.com
NASA: nasa.gov
European Space Agency: https://www.esa.int/
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Today, host Fabian Alefeld speaks with the owner and founder of 44 Bikes, Kris Henry, and EOS’ Spencer Thompson. Kris shares his passion for creating custom bikes and describes how he uses the design and supply chain aspects of AM to make handcrafted custom bikes accessible to a larger user group. Spencer offers insights into the state of AM adoption by small business owners, highlights the partnership opportunities available to manufacturers, and shares the hurdles independent builders face in the AM space.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[2:11] 44 Bikes was born of Kris’ love of bicycles and his passion for designing things.
[8:48] The benefits of additive manufacturing in building custom bicycles.
[20:07] 3D printing offers small shop owners and bike enthusiasts a whole new level of design.
[26:29] Supply chain challenges and speed to market increase AM adoption in small businesses.
[34:22] When only a few parts are needed, finding manufacturers to partner with is a big hurdle.
[36:03] The lack of protocols or universal standards for additive manufacturing creates a huge learning curve for independent builders.
Resources Link:
44 Bikes: 44bikes.com
Spencer Thompson's LinkedIn: linkedin.com/in/spencersthompson
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
In this special episode, host Fabian Alefeld speaks with LJ Holmes. LJ has one of the most diverse jobs in the AM industry. He is the Executive Director of Advanced Manufacturing Research and Engineering at Harrisburg University. His rich background in AM from its historical roots in the DoD to current uses and future applications. LJ describes his AM journey from the Army Research Center to Harrisburg University, how AM has evolved within the defense sector, and some undocumented stories of early use cases and current applications within the DoD.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[1:50] LJ shares his journey to AM and the integration of AM at the Army Research Center and the Department of Defense.
[11:47] Authoring the 30-year Additive Manufacturing Roadmap was the last project LJ completed for the Army Research Center.
[17:15] Harrisburg University of Science and Technology offers students an advanced manufacturing curriculum and STEM-focused education.
[26:35] Additively manufactured components may or may not have been used in military vehicles as early as the 2000s.
[29:41] Additive applications for future civilian and military use.
[42:17] During AMUG 2024, LJ will introduce a 50-foot-tall friction stir hybrid additive machine.
Resource Link:
LJ Holmes on LinkedIn: linkedin.com/in/larry-lj-holmes-b757663a
Harrisburg University of Science and Technology: https://www.harrisburgu.edu/
JDAMMIT.com: http://www.jdammit.com
ASTROA.org — AM Forward focus: astroa.org
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
In this episode, host Fabian Alefeld speaks with Pieter Ruijssenaars, the CEO and founder of DiManEx. DiManEx is redefining the AM supply chain network for its clients. Pieter describes how AM navigates the complexities of supply chains, making them more resilient, especially in the light of current geo-political tensions, his smart concept of printing 'dumb parts', and how DiManEx builds digital inventories that lead to sustainable and cost-effective business strategies.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[3:00] Pieter’s view on how AM can help build more resilient supply chains.
[7:29] The printing of ‘dumb parts’ that solve real problems is a smart concept.
[12:17] How DiManEx illustrates the business case for additive within an organization.
[22:00] DiManEx utilizes the R-ladder concept to validate the sustainability of additive manufacturing with clients.
[32:33] The future of AM adoption from Pieter’s perspective.
Resource Link:
DiManEx: dimanex.com
Pieter Ruijssenaars LinkedIn: linkedin.com/in/pieter-ruijssenaars-a85b714/?originalSubdomain=nl
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Host Fabian Alefeld speaks with Dr. Alaa Elwany, science and technology policy fellow at the U.S. Department of Energy, Advanced Manufacturing Office. Alaa is a recognized expert in additive manufacturing and a key advisor in the realm of science and technology to the U.S. government. He is currently serving as a science and technology fellow at the US Department of Energy and as a professor at Texas A&M at the Department of Industrial and System Engineering. Fabian and Alaa talk about Alaa's experience within the DOE, the intersection of AM and energy, the future of smart manufacturing and digital manufacturing, and resources for business owners looking to expand their AM opportunities.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[1:24] Alaa explains his role within the DOE and how he and his team are shaping the future of energy.
[3:36] Additive manufacturing is versatile and scalable enough to be used in major clean energy projects.
[8:18] Materials that have a high relevance to energy applications.
[11:38] Additive’s foundational role in increasing supply chain resilience.
[16:48] Next-gen energy technology includes additive manufacturing.
[20:48] The future of integrating smart manufacturing and AI into additive manufacturing.
[30:33] The vital role of government investment, regulation, and support for the future of additive and smart manufacturing.
Resource Link:
Digital Factory Project at Oak Ridge: ornl.gov/facility/mdf/digital-manufacturing
Manufacturing Extension Partnership (MEP): nist.gov/mep
Manufacturing USA Institutes: manufacturingusa.com/institutes
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
In this special episode, Host Fabian Alefeld speaks with four panelists from the Digital Foam Architects Network about the full process chain and the complexities and opportunities of Digital Foam. Joining the panel discussion are Pierre Gonnetan, business development manager at Arkema, Mike Schorr, general manager at DyeMansion, Nick Florek, CEO of General Lattice, and Dr. Dave Krzeminski, senior Additive Minds consultant at EOS. The goal of the Digital Foam Architects Network is to increase accessibility, scalability, and speed up development for performance-based lattice structures.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[3:08] The history of polymer lattice structures and methodologies of production with Nick Florek
[7:54] Dave Krzeminski on overcoming the challenges of an ever-changing technology
[15:00] Objectives and initiatives of the Digital Foam Architects Network
[19:41] Pierre Gonnetan on the material landscape and key drivers for digital foam applications
[31:03] Mike Schorr on the importance of post-processing aspects of Digital Foam.
[38:41] Mike Schorr explains the complex process of creating uniformity in powdering, coloring, and smoothing polymers.
[48:48] Nick Florek unpacks the coordination and parameters of the digital design phase.
[56:23] Additional industrial opportunities for Digital Foam applications.
Resource Link:
Arkema: arkema.com/usa/en
DyeMansion: dyemansion.com
General Lattice: generallattice.com
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________ Subscribe to our YouTube channel: YouTube: https://www.youtube.com/eosgmbh?sub_c... Follow us: LinkedIn: linkedin.com/company/eos Twitter: https ://twitter.com/eos3dprinting ____________________ Imprint: eos.info/en/footer/imprint Privacy Policy: https://www.eos.info/en/footer/privac... ____________________
Joining Host Fabian Alefeld is Barry Hulce, the Executive Director of Vermont’s Manufacturing Collaborative (VTMC). In this episode, Barry unpacks the complexities of modern manufacturing, dives into the challenges of workforce development, and reveals how his organization is constructing a robust manufacturing infrastructure that is set to accelerate the adoption of additive manufacturing.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[1:21] Industry agnostic, Barry enjoys working with systems that help people.
[8:20] The purpose and intention of Vermont Manufacturing Collaborative.
[12:09] How VTMC’s ecosystem will be duplicated and scaled for rural communities.
[17:35] VTMC’s plan for increasing capacity and developing the future AM workforce.
[23:31] How educating an AM workforce differs from conventional manufacturing technologies.
[34:05] VTMC’s technological capabilities and the development stages of active products.
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Joining host Fabian Alefeld is Ben DiMarco, AM Technology Leader and Principal Engineer at Ohio State University’s Center for Design and Manufacturing Excellence (CDME). In this conversation, they explore Ben’s contributions to lattice structures, process monitoring, and innovative technologies such as nLIGHT and cold metal fusion. They also touch on Ben’s role and passion for workforce development.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[1:15] In 2009, Ben’s first printed AM part was a brake fluid reservoir used in the racing industry.
[3:39] Ben describes the key characteristics of lattice structure and its impact on part performance.
[8:18] For the past few years, Ben’s objective has been to create a semi-empirical model for lattice structures.
[17:00] Ben’s vision for how his work will impact the AM industry.
[22:00] An overview of nLIGHT technology and OSU’s beam shaping project.
[32:10] Examples of current and future uses of artificial intelligence in additive manufacturing.
[34:45] OSU’s forthcoming study includes the history and future of cold metal fusion.
[39:20] Ben explains OSU’s CDME workforce development program.
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Host Fabian Alefeld speaks with Princess Moshoana, a South African woman whose life was forever changed by a violent act and then restored through the marvels of AM and Dr. Gerrie Booysen, a leading figure in AM and Director of the Centre for Rapid Prototyping and Manufacturing at the Central University of Technology. Together, they share a journey of recovery and groundbreaking advancements in medical industrial 3D printing.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[1:31] Princess recounts the violent crime that left her physically and emotionally unable to smile.
[7:11] Dr. Gerrie Booysen explains the history of the Centre for Rapid Prototyping and how they began 3D-printed patient-specific implants.
[11:06] The arduous process chain of creating, implanting, and reconstructing Princess’ jaw with an AM printed part.
[13:37] How additive manufacturing helped Princess regain her hopes and dreams.
[15:14] The many ways AM devices and reconstructive surgery can meet the tremendous needs of South Africans.
Resource Link: https://crpm.co.za/
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
For a more in-depth understanding, watch the previous BLUEPRINT Vlog episode #8 featuring Siemens, an AMGTA member, on the topic of sustainable 3D printed grippers. And additional information about AMGTA is available for those interested in learning more as well.
Links in this episode:
Learn more about AMGTA: amgta.org
Watch BLUEPRINT Vlog episode #7 featuring AMGTA member Siemens discussing their sustainable 3D printed gripper: youtube.com/watch?v=auEqXIwuUuM
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Together, they dive into the innovative world of #3Dprinting and explore Siemens' topology-optimized gripper designed for efficiently transporting battery cells, while showcasing a 90% carbon footprint reduction. To learn more watch this episode now!
Links in the episode:
EOS Cost & Carbon Calculator: store.eos.info/collections/additive-minds-academy/products/eos-cost-carbon-calculator
Polyamide 12 Material: eos.info/en/3d-printing-materials/plastic/polyamide-pa-12-alumide
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Joining Host Fabian Alefeld is Derek VanDenDreissche, Vice President of Sales and Business Development at Precision ADM. Precision ADM is a contract manufacturer specializing in additive manufacturing. Derek has extensive experience in building successful additive manufacturing production chains. He explains Precision’s three-step process from prototype to production, the value of partnering with a contract manufacturer, and the challenges of producing parts for the medical and aerospace industries.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[3:31] Who is Precision ADM and how do they maintain supply chain agility?
[8:36] Derek details Precision ADM’s 3-step process from prototyping to production.
[11:29] Derek explains the similarities and challenges of handling additive production for the aerospace and medical industries.
[13:31] What criteria demonstrate the value of partnering with a contract manufacturer versus vertically integrating additive production?
[18:26] How is Precision ADM pushing the additive manufacturing industry forward?
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Joining Host Fabian Alefeld is Mark Morrison, Senior Research Manager at Smith & Nephew. Mark has decades of experience in both additive manufacturing and material science. Their conversation explores the significance of material science in AM, Mark’s unique journey, and sheds light on Smith & Nephew’s achievements including producing hundreds of thousands of patient-specific applications. Mark highlights key applications driving AM adoption and the importance of porous structures in the medical space. They also address the patient-specific perspective, the challenges of integrating AM into big business, and how the industry is navigating the experience gap between traditional methods and modern industrial 3D printing.
All opinions expressed by podcast participants are so current opinions and do not reflect the opinions of EOS or the podcast participant’s respective companies and/or affiliates.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[1:55] Mark’s appreciation for understanding why things behave the way they do triggered his journey into material science and additive manufacturing.
[5:03] In the medical industry, what current applications can be enhanced by additive manufacturing, and what are the patient benefits?
[10:33] What challenges or limitations does Mark foresee for integrating additive manufacturing more broadly in the medical space?
[15:46] What role does the FDA play in assisting organizations to qualify additively manufactured implants to make them market-ready?
[19:31] What excites Mark when he thinks about current and future additive applications?
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Joining Host Fabian Alefeld is Chuck Hansford, Director of Advanced Development at Tecomet. In the US, Chuck is widely known to be one of the most experienced metal additive manufacturing experts in the medical industry. He provides profound insights on where AM is currently as a technology and where it will be in the future, what makes clients adopt AM, and guidance for the next generation of AM innovators.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[:45] Chuck describes his early days of testing the boundaries of additive manufacturing in plastics, then metals.
[5:37] Chuck explains where the medical industry stands when it comes to adopting additive manufacturing.
[9:41] Chuck gets technical about the product development lifecycle, adoption of AM in the medical industry, and resolving trapped powder particles.
[23:00] What are AM adoption rates and trends in the medical space?
[28:27] Chuck’s key guidance for engineers, C-levels, and operators who may be skeptical about adopting additive manufacturing.
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Joining Host Fabian Alefeld is restor3D's brilliant co-founder and CTO Cambre Kelly. Cambre is a key figure behind the company's impressive success and recently joined the Forbes 30 under 30 list in the manufacturing and industry sector. In addition to sharing restor3D’s unique and innovative business model, Cambre explains how restor3D views the intersection of additive manufacturing, personalized healthcare, and artificial intelligence.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[1:16] Cambre describes her education, research, and career journey that led to her specializing in 3D-printed porous structures in orthopedics.
[3:35] Cambre delved into unexplored territory researching optimized gyroid lattice structures for orthopedics.
[6:52] Founded in 2017, restor3D has been successful in the complex task of vertically integrating additive and traditional manufacturing without outsourcing.
[16:08] In an effort to bring more personalized solutions to the orthopedic market, restor3D recently acquired companies that will expand their reach.
[20:33] Restor3D endeavors to be technology agnostic and utilize AI tools for design efficiencies.
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Host Fabian Alefeld is joined by the founder and principal consultant of LG Strategies, Laura Gilmour. Laura has extensive experience in additive manufacturing and in particular in the medical market. Laura offers a comprehensive overview of the medical industry as a whole and discusses the challenges of its adoption of additive manufacturing and the current medical industry trends where additive manufacturing is making a big impact.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[:54] Laura shares her unique AM journey within the medical markets industry.
[3:12] Laura describes the medical sectors AM is helping to revolutionize including hearing aids, hip implants, and digital dental applications for the medical implant industry.
[11:15] When implementing AM in the medical space regulatory reviews and insurers can be the biggest hurdles.
[16:04] The risk versus benefits requirements of the primary regulatory bodies.
[21:21] How IQ, OQ, and PQ processes apply to the medical device industry.
[24:41] Laura highlights trends in the medical industry with regard to the benefits of additive manufacturing innovations.
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Today, joining Host Fabian Alefeld is Ronen Hadar, the Senior Director of Additive Design and Manufacturing at the LEGO Group. Ronen has a unique perspective on the advantages and challenges of working with AM in the consumer goods industry. He shares the long history of AM within the LEGO Group, how the famous ‘duck’ project came about, and how a limited talent pool may affect new digital technologies.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[:46] In 2010, Ronen began exploring how AM could alleviate supply chain challenges at the LEGO Group.
[3:29] From prototyping to on-demand final designs, Ronen explains how the LEGO Group was one of the initial companies to adopt 3D printing for multiple applications.
[10:59] Ronen explains why he asserts that AM is not a replacement for injection molding.
[12:52] While scouting new technologies, the LEGO Group’s now famous duck was an application to highlight the advantages of AM.
[21:05] For the consumer goods industry, Ronen shares what he sees as the biggest challenges for the adoption of AM as an end-user technology.
[28:25] How does the LEGO Group handle the small talent pool available to work in AM applications?
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Today, Host Fabian Alefeld is joined by Travis and Nathan Eadie who called in from the Australian Podiatry Conference. Travis and Nathan are an innovative brother duo behind the company Doc Sols, a revolutionary company making strides in podiatry with their additively manufactured orthopedic insoles. This episode promises a riveting discussion about their journey, their challenges and triumphs, and their vision for the future of additive manufacturing in healthcare.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[1:09] How Nathan, a sports podiatrist, and his brother Travis, a tradesman began creating custom insoles 25 years ago.
[6:51] Nathan and Travis describe the full-process chain, from the app to the 3-D printed end product.
[10:36] How does additive manufacturing mixed with AI benefit customers of insoles who have different orthopedic needs?
[18:06] What major challenges have Nathan and Travis experienced that stifled their progress of using AI with additive manufacturing?
[24:42] What does the Doc Sols platform-based business model look like five years out?
Learn more about Additive Snack here: eos.info/additive-snack
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
To unravel the intricacies of this fascinating subject, Host Fabian Alefeld is joined by the Professor & Director School of Kinesiology & Nutrition at the University of Southern Mississippi, Scott Piland. Scott is an expert at the intersection of sports and technology. He has been on the front lines of research and development discovering how AM is sculpting the future of player safety devices and other crucial equipment.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[1:02] Scott explains his journey from shoe salesperson to athletic trainer to a respected sports safety and AM material integrator.
[7:24] Scott shares his thoughts on the future role of AM in kinesiology and sports sciences.
[14:13] The benefits AM offers to sports equipment designers to transform sport safety devices.
[21:27] How multidisciplinary groups use AM as a vehicle to innovate and transform a wide range of industries.
[26:51] Scott shares real-life applications of AM in sports and the long-term user benefits of technological enhancements.
Learn more about Additive Snack here: eos.info/additive-snack
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
In this episode, Host Fabian Alefeld is joined by the Engineering Manager for Advanced Product Development at Bauer Hockey, Thierry Krick. Thierry and the team at Bauer use AM and powder technology to design and produce protective equipment and productive products for hockey players. Conn Smythe Trophy winner, Cale Makar of the Colorado Avalanche won MVP while wearing a custom Bauer AM-assisted-design helmet.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[3:08] Why is AM suitable for designing high-tech sports equipment?
[4:01] Thierry explains how a small piece of foam sparked a complete manufacturing revolution at Bauer Hockey.
[10:45] Why Thierry chose powder technology to be the production path for the future at Bauer.
[15:43] From R&D to production, Thierry shares the many different assets involved in creating a viable sports helmet.
[20:29] Thierry reveals the hockey helmet and explains how each helmet is fitted to an athlete's head.
[25:24] How athletes can get their own Perfect Fit Helmet from Bauer.
Learn more about Additive Snack here: eos.info/additive-snack
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Host Fabian Alefeld is joined by Dr. Nadine Lippa, Innovation Manager at Wilson Sporting Goods, and Tyler Webb, Sports Marketer and Co-founder of Uncle Charlie. Nadine, the brilliant mind who led the product development of Wilson’s Airless Prototype Basketball, shares behind-the-scenes moments from the project’s origin to meeting Shaquille O’Neal and Mark Cuban courtside. Tyler, the creator of the viral video that sent ripples across the internet, shares how he made the Airless Prototype Basketball the most-seen additive manufacturing application ever created.
Comments about the show or wish to share your AM journey? Contact us at additive.snack@eos-na.com. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[1:27] Nadine describes what it felt like to be courtside at the NBA Dunk Contest when her 3D printed Airless Prototype Basketball was revealed.
[6:31] Wilson’s additive manufacturing journey didn’t begin with a basketball; Nadine shares some history.
[9:38] Nadine explains the complex process her team used to turn a polymer into a high-performance basketball and the biggest challenges the team faced.
[16:20] How did Wilson’s marketing efforts go viral to ignite a trend of combining additive manufacturing and sports?
Learn more about Additive Snack here: eos.info/additive-snack
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Learn more here: https://store.eos.info/collections/le...
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Learn more here: https://store.eos.info/collections/le...
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
In the EOSPRINT, data preparation workflow is significantly streamlined. Users can now conveniently handle crucial tasks such as assignment of exposure parameters, build time calculation, crash checks, and machine task submission directly within Autodesk Fusion 360.
Learn more here: https://store.eos.info/collections/le...
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Learn more here: store.eos.info/collections/learning-path
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Learn more here: eos.info/en/innovations/3d-printing-of-the-future/fine-detail-resolution
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Driving the future of polymer 3D printing will always matter more than resting on the laurels of our past. The unique balance of established success and our experts' restless urge to innovate is what allows EOS to offer effectively integrated AM solutions.
Learn more here: eos.info/polymer-expert
Step into the awe-inspiring world of 3D printing and feel the energy buzzing among the EOS colleagues. At EOS work isn't just a job - it's a thrilling dance!
Become part of EOS and revolutionize the world through 3D printing.
eos.info/en/career
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Smart Fusion is the latest addition to EOS commitment to advancing and promoting metal additive manufacturing (AM) through innovative solutions that simplify the process, save costs and increase productivity.
Learn more here: eos.info/smart-fusion
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
Host of BLUEPRINT Björn Hannappel sat down with Sustainability Manager Lea Stegemann and Consultant Nameer Syed who developed a carbon calculator, that calculates the cost and CO2e emissions of additively manufactured components. Besides bare numbers, the tool indicates the decisive emission contributors and allows users to improve their applications through what-if simulations. In addition, our experts explain why it is essential for manufacturers to have a price tag on emissions caused.
Watch the 6th episode and gain transparency into your 3D printed application carbon footprint!
00:00 Introduction
1:00 Benefits of carbon calculation
5:34 Carbon calculator demo
Links in this episode:
Read our blog about cost and carbon calculation: eos.info/en/blog/cost-carbon-calculator-additive-manufacturing~b~11604
Get your free trial of the EOS Cost & Carbon Calculator: store.eos.info/collections/additive-minds-academy/products/eos-cost-carbon-calculator
#futureisadditive #responsiblemanufacturing #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
and need a structured approach to scale your production? In this video, we have summarized the 10 rules of AM, to help you with future projects!
____________________
For additional information about AM, please use the resources below. EOS website: eos.info/en
Additive Minds Academy: store.eos.info
____________________
Subscribe to our YouTube channel: YouTube: youtube.com/eosgmbh?sub_c .. .
Follow us: LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https: //www.eos.info/en/footer/privac... .
____________________
Working together with EOS and XAM on their pain points, TICO explored AM technology to enable 3-dimensional cooling channels in the die to enhance cooling and heat homogenization. With AM, they achieved optimal temperature, freedom of design of the cooling channels and reduced the amount of polishing in all the parts, with 80% of the part eliminating polishing , therefore reducing defects and increasing operation rate.
#futureisadditive #3Dprinting
____________________
Subscribe to our YouTube channel:
YouTube: https://www.youtube.com/eosgmbh?sub_c...
Follow us:
LinkedIn: linkedin.com/company/eos
Twitter: twitter.com/eos3dprinting
____________________
Imprint: eos.info/en/footer/imprint
Privacy Policy: https://www.eos.info/en/footer/privac...
____________________
#futureisadditive #responsiblemanufacturing #saubertechnologies #3dprinting
____________________
Subscribe to our YOUTUBE-Channel here for free:
YOUTUBE: youtube.com/eosgmbh?sub_confirmation=1
Follow us on Social-Media:
LINKEDIN: linkedin.com/company/eos
TWITTER: twitter.com/eos3dprinting
____________________
IMPRINT: eos.info/en/footer/imprint
PRIVACY POLICY: eos.info/en/footer/privacy-policy
____________________
#futureisadditive #responsiblemanufacturing #3Dprinting
00:00 Introduction
5:54 Beam Shaping
16:55 Support Free
Discover themonitoring solutions provided by EOS.
Book your training now: store.eos.info
____________________
Follow us on Social-Media:
LINKEDIN: linkedin.com/company/eos
TWITTER: twitter.com/eosgmbh
____________________
IMPRINT: eos.info/de/footer/impressum
PRIVACY POLICY: eos.info/en/footer/privacy-policy
____________________
#futureisadditive #responsiblemanufacturing #3dprinting
#futureisadditive #responsiblemanufacturing #saubertechnologies #3dprinting
Subscribe to our YOUTUBE-Channel here for free:
YOUTUBE: https://www.youtube.com/eosgmbh?sub_c...
Follow us on Social-Media:
LINKEDIN: linkedin.com/company/eos
TWITTER: twitter.com/eos3dprinting
____________________
IMPRINT: eos.info/de/footer/impressum
PRIVACY POLICY: eos.info/en/footer/privacy-policy
____________________
00:00 Introduction
08:25 Preventing powder damage
00:00 Sebastian Zenetti
12:14 Sebastian Kilchert


