D&C Guitars Made in Belgium
Real Ghost action caught on tape
updated
In this video, you'll learn how to hack a Makita RT0702C Router so that you can remotely control the device using the Masuter Pro.
If you're looking for ways to control your Makita router from a distance, then this hack is for you! By following this tutorial, you'll be able to hack your Makita router and control it using the Masuter Pro. This is a great way to save time and hassle, and ensure that your Makita router is always working properly!
Makita RT0702C Router hack for remote control relay**Use this at your own riskThe On / Off / Auto feature of the remote panel is compatible with the Makita RT0700C and Makita RT0701C router. Or any other router without “Anti-restart function”. The Makita RT0702C is not compatible but can be made compatible with a simple hack. Basically you need to keep the router powered and switch it on / off with the blue wire. Follow these steps to make it compatible with the remote panel, or any other cnc relay control.Things you needLong flexible 3 core cable. Preferable brown, grey and black. Make sure it can handle more than 710W.Single terminal block (or better: Solder and heat shrink tubing)All steps
Step 1: Remove 4 screws.
Step 2: Open up and unscrew cable strain relief.
Step 3: Remove original cable.
Step 4: Pull out switch, unscrew terminal with white and blue wire and remove the blue wire from the switch. Put the white wire back in the switch and tighten terminal.
Step 5: Remove original wire from the screw terminals. Attach new wire to the screw terminals. Connect brown to the double orange wires. Connect grey to the pink/black wire. Connect the black to the blue wire (with a terminal block, or solder together).
Step 6: Reattach the strain relief and close the router by reattaching the 4 screws from step
1.Safety note
The router is always powered and software enabled with the micro controller inside the Makita. It is advisable to use the power switch on the Makita to completely power off the router when switching bits.
If you're looking for ways to control your Makita router from a distance, then this hack is for you! By following this tutorial, you'll be able to hack your Makita router and control it using the Masuter Pro. This is a great way to save time and hassle, and ensure that your Makita router is always working properly!
Makita RT0702C Router hack for remote control relay**Use this at your own riskThe On / Off / Auto feature of the remote panel is compatible with the Makita RT0700C and Makita RT0701C router. Or any other router without “Anti-restart function”. The Makita RT0702C is not compatible but can be made compatible with a simple hack. Basically you need to keep the router powered and switch it on / off with the blue wire. Follow these steps to make it compatible with the remote panel, or any other cnc relay control.Things you needLong flexible 3 core cable. Preferable brown, grey and black. Make sure it can handle more than 710W.Single terminal block (or better: Solder and heat shrink tubing)All steps
Step 1: Remove 4 screws.
Step 2: Open up and unscrew cable strain relief.
Step 3: Remove original cable.
Step 4: Pull out switch, unscrew terminal with white and blue wire and remove the blue wire from the switch. Put the white wire back in the switch and tighten terminal.
Step 5: Remove original wire from the screw terminals. Attach new wire to the screw terminals. Connect brown to the double orange wires. Connect grey to the pink/black wire. Connect the black to the blue wire (with a terminal block, or solder together).
Step 6: Reattach the strain relief and close the router by reattaching the 4 screws from step
1.Safety note
The router is always powered and software enabled with the micro controller inside the Makita. It is advisable to use the power switch on the Makita to completely power off the router when switching bits.
modern gate design ideas for garden fence decor and security
iron gates designs
wooden gate design
enjoy
just enjoy this build
give us a follow and a like
the specs
D&C Reptile
Body: steel
Finish: reptile skin etched front back and sides, green reptile color mixed with rusty and black spots
strap holder: locking
tuners: kluson locking tuners 6R
pickup: Lace Pickups alumitone Deadbucker
1 volume, 1 iron age kill switch
Neck: full maple reinforced with 2 carbon fiber rods
Speed neck; .775" @ 3rd fret tapering to .835 @ the 12th, D-shape, 24 stainless frets, reversed headstock
ebony fretboard radius: Compund,12" - 16",
green Luminlay sidedots (2 Fret12th)
D&C Logo green Luminlay
scale: 28 5/8´´
D&C Facebook page; facebook.com/Metalbodyguitars
A custom build for Matt Sheridan of Pro-Pain and Mad Man Music (www.youtube.com/madmanmusic)
This is the first steel body guitar made for use with an EverTune Bridge.
Features:
Body: Steel
Finish: Black Relic
Neck: Stained Flame Maple
Fretboard: Ebony
Frets: 24 J
Pickups: Seymour Duncan Dual 7 String Distortion “Mayhem” Set
Bridge: Evertune
Tuners: Grover Locking Tuners
Nut: Brass
Strings: 7 string
this time I was looking for worms in the mask that you are wearing to protect you from covid19
D&C Metal V
body made from sheet metal
parts of the fade to black lyrics (Metallica) engraved
a custom build from scratch
We build all guitars on demand
check our site: dcsteelbodyguitars.com
if you would like to interact to me directly
you can find me on facebook: facebook.com/SteelBodyGuitars
give us a like and subscribe to my channel to see upcoming builds
Steel is the new Wood
A custom build for a client in new zealand
body: steel
finish: white relic with some cool engravings ;)
call The A-Team......
this movie shows it all
Dare to be unique
Steel Body guitars Made in Belgium
some of our models
guitars made out of sheet steel
Finish: rusty alligator skin engraved
Neck: 22 J frets full maple baseball neck
Nut: brass
Tuners: kluson
Pickups: Seymour Duncan Quarter pound tele set
extra: alligator skin engraving, custom control plate with slanted switch
i made this video and try to give you all information in my best English lol
hope you can make one of your own now
Finish: cream white relic
Neck: Hard Full maple neck 14"radius (aged black) fat c neck
frets: medium jumbo frets
Nut: Bone
Pickups: 4 seasons pickups hand wound Paff (gold)
Pots: 1 volume 1 tone CTS switch: 3 way lever gold plated
comes with a hardshell case
hand made guitar that sounds like a Beast
D&C Metalcaster Beast Custom
Body: Hollow steel
finish: D&C rusty Relic
Neck: 21 frets Full Maple with D&C Relic Finish
tuners: Gotoh
Pickup bridge:Gibson Burstbucker Type 3
Pickup Neck: None
Nut: Bone
a lot of people like them so i have desided to make more of these and put them on my webshop
dcsteelbodyguitars.com/webshop.html
this V has some Fade to Black lyrics engraved
a aluminium stoptail bridge made by hand
Body: Steel
finish: relic, engraved lyrics, and angryman on the back
Pickups: EMG James Hetfield Set
bridge: handmade stoptail with Tune-o-matic
neck: 22 J frets Maple/rosewood
1 Volume, 1 tone, 3 way toggle
New build for Bobby Gustafson
D&C Master V, SkullHammer
got a nice deep etch
Stallion Thunderbass 5 string, 24 frets (THB5)
loaded with EMG DC40
Body: Steel filigree engraving with 18 K gold inlay
neck: maple with steel fretboard filigree engraving with 18 K gold inlay
nut: steel nut integrated in to steel fretboard
pickups: 4 season handwound P90 in humbucker size
steel neckplate filigree engraving with 18 K gold inlay
I have no experience what so ever but i get a nice result this way
Body: Steel/ Steel mesh
Finish: Rusty
Neck: 22 frets Maple/ebony
tuners: shaller
Nut: Bone
Pickup Neck: Hand wound humbucker in single coil 12k
Pickup Bridge: Hand wound Humbucker 11k
Pots: 1 volume 1 tone CTS
switch: 3 way lever gold plated
D&C Metalcaster with steel fretboard in production
engraved filigree filled with gold
up for sell
D&C X-Fusion
body: steel
finish: Relic
pickups: EMG JH set
neck: Mahonie en dark Indian rosewood, black relic, 12 inch radius, Jumbo 6100 frets, 2 way trussrod
Metalcaster loaded with PH90 (P90 in humbucker size)
thnx to Maxim Bobbaerts chack out his page 2 youtube.com/channel/UCbuwEaJNhhCQWDBX-v0601g
D&C Metalcaster Rebel
Body: Hollow steel / Perforated Plate
finish: Black Relic, racing stripes with star
Neck: aged flamed maple, 9'' radius medium jumbo frets
tuners: kluson
Pickup bridge: Seymour Duncan quarter pound
Pickup Neck: Seymour Duncan quarter pound
Nut: steel
D&C Website: http://www.dcsteelbodyguitars.com
D&C Facebook: facebook.com/Metalbodyguitars
D&C Steel Body SG
The Black Devil
i wanted to look like there is a engine inside of the body, so it looks more than a mean machine
specs are:
D&C BLACK DEVIL
Body: Steel
Finish: blue burn steel/ black relic
Neck: maple/rosewood 22 frets, 12"
Pickups: EMG JH set
Nut: Graphtec
more information about the band can be found here:
-Octane-
Facebook: facebook.com/octane53
Website: groupe-octane.com
More information about the guitars can be found here:
-D&C-
Facebook: facebook.com/Metalbodyguitars
Website: dcsteelbodyguitars.com
D&C Metalcaster Rebel
Body: steel
Pickups: Seymour Duncan quarter pound set
Neck: aged flamed maple, 9'' radius medium jumbo frets
Tuners: kluson
Nut: Steel
Specs:
D&C Metalcaster Rebel
Body: steel
Pickups: Seymour Duncan quarter pound set
Neck: aged flamed maple, 9'' radius medium jumbo frets
Tuners: kluson
Nut: Steel
my website: dcsteelbodyguitars.com
D&C Facebook: facebook.com/Metalbodyguitars
i build on Demand
need something?
leave a replay
specs of the guitar
Body: Steel
Finish: Rusty Black relic
Neck: Hard maple neck, dark indian rosewood fingerboard and 14"radius
frets: medium jumbo frets
Nut: Bone
Pickups: 4 seasons pickups hand wound Neck 9K en Bridge 14K
Pots: 1 volume 1 pushpull tone CTS
switch: 3 way lever gold plated
a drill and tap M 3
loaded with handwound pickups (4seasons pickups)
this build is designed by the customer and build by me
Welcome to the D&C Family Nicky hope you will enjoy it
you want something i ship world wide
www.dcsteelbodyguitars.com
specs:
Thanx for watching
specs. of the guitar:
D&C Steel LP
- Body: Steel
- Finish: Black/white relic honeycomb on the top and on the sides
- Neck: maple/rosewood fingerboard
- Frets: Medium jumbo frets
- Nut: Graphtec
- Pickups: - Neck: little 59 in humbucker size 7,5K
- Bridge: SSL5 in humbuckersize 14K
- Pots: 2 volume 2 tone CTS
- Selector: 3 way toggle switch
Hardware in aged nickel
http://www.dcsteelbodyguitars.com
finish: D&C antique steel
Neck: 22 frets Maple/rosewood
tuners: Boston
Pickup bridge: P90 hand wound (5% over wound)
Pickup Neck: P90 hand wound (5% over wound)
Nut: Graphtech
http://www.dcsteelbodyguitars.com
Like us on FB
facebook.com/Metalbodyguitars
D&C Steel LP
black and white Relic
honeycomb on the sides and top
neck light flamed maple/rosewood with honeycomb inlay
stay tuned for the finished product
interested in a custom steel body guitar?
we ship worldwide
http://www.dcsteelbodyguitars.com
i give this body a aged steel look
stay tuned for more upcoming builds
subscribe if you like the video and leave a replay
if you are interested in a custom made steel body guitar, feel free to contact me
website: http://www.dcsteelbodyguitars.com
follow pour builds and like the D&C facebook page :
facebook.com/Metalbodyguitars
gives his custom made steel Body guitar a test ride
Body: steel
Finish: black with steel hammer
Neck: Maple/rosewood 22
jumbo frets
Pickups: EMG Pickups 81/85
Nut: Steel
Cts tone and volume, 3 way
toggle switch
thnx for watching
Music: Satans Taint
Song: Gothic Serpent, from
there latest album
Axe to the head of my enemies
http://www.dcsteelbodyguitars.com
Custom build for Bobby Gustafson from Satans Taint
D&C Hammer Of THOR
Body: Steel
Finish: Black with steel hammer
Neck: Hard Maple/Rosewood
Nut: Steel
Tuners: Boston locking
Pickups: EMG active Humbuckers 85/81
1 tone, 1 Volume, and
a 3 way toggle switch
cliplock straps
http://www.dcsteelbodyguitars.com


