Skewer Crossbow (SkewBow) Release Video Sillybutts 2021-09-14 | Files: thingiverse.com/thing:4964594 github.com/Sillybutts/SkewerCrossbowOverview: youtu.be/PaMqwsO_OakAssembly: youtu.be/IAop-2hu9pYIf you want to financially support what I do, please go check out my RedBubble shop! redbubble.com/people/Sillybutts/shop
Work in progress: adjustable stock using screws and gears! Sillybutts 2024-10-14 | - Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too: stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts
Slow Motion #Nerf Shotgun-style Blaster! Test firing a new barrel. Sillybutts 2024-10-13 | The barrel tested: 35mm inner diameter, 10.5 inches long.Conclusions: - I need a wider barrel to prevent tumbling of the darts in the barrel.- I will next be trying out a 46mm ID barrel.:)Timestamps:0:00 Introduction0:14 Full length darts x20:37 Full length darts x31:05 Full length darts x42:19 Half length darts x42:49 Half length darts x83:41 Conclusions- Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too: stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dprinting Music used: Rondo Brothers - Yellow Rose of Berkeley
Drum Magazine for Nerf Silly Shells, and a 3x shell straight magazine too! Sillybutts 2024-10-11 | - Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too: stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting
Nerf Shell Fed Pump Shotty - Durability Testing (10 minutes of test firing) #Nerf #3dPrinting Sillybutts 2024-10-07 | This video is just me abusing this blaster for 10ish minutes. Enjoy the loud sounds!The filament for this blaster was provided to me by Polymaker at no charge.- Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too: stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting
Printables Awards 2024 - Nominate Sillybutts! (please) Sillybutts 2024-09-23 | More information here: - blog.prusa3d.com/printables-awards-2024-celebrating-the-best-in-3d-printable-design_102327 - printables.com/@Sillybutts#printables-awards-nominations
Nerf Shell Fed Pump Shotty - updated parts! #Nerf #3dPrinting Sillybutts 2024-09-20 | - Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too: stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting
I made a 3d printer filament spool holder! PVC pipe frame, with a printed roller for smooth feeding! Sillybutts 2024-09-19 | Free files and instructions for this filament spool holder: printables.com/model/1010021-filament-holderstand-with-a-printed-roller-and-12- Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too: stuffbysilly.com
Nerf HPA Semi-Automatic blaster - WHALE SHARK, first prototype firing demo and overview! #3dPrinting Sillybutts 2024-09-18 | - Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too: stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting #nerfhpa #hpanerfFilament provided by Polymaker.
The Foxbat assembly instructions/guide is on Printables as a PDF file (Nerf Blaster Homemade) Sillybutts 2024-09-08 | printables.com/model/969546-foxbat-mag-in-grip-handcannon-pistol-printed-nerf
The Wildstyle assembly instructions/guide is on Printables as a PDF file (Nerf Blaster Homemade) Sillybutts 2024-09-08 | printables.com/model/880472-wildstyle-shell-fed-pistol-nerf-homemade
NERF HPA GREAT SUCCESS! WOOOOOOOOOOOO #Nerf #3dPrinting Sillybutts 2024-09-06 | - Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too: stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting #nerfhpa #hpanerf for those wondering, this is a CDJ2b10-75 air cylinder. I got mine from AliExpress here: aliexpress.com/item/32859797055.htmlI haven't quite decided yet if its powerful enough to operate a breech nicely, I'm considering getting a slightly bigger one to try out.
Nerf daisy-chained HPA cores together (my printed core and a Cosmic Nomad) - Testing Sillybutts 2024-09-05 | I'm planning on buying a much bigger Paintball air tank soon so I can do more testing. If you want to help fund that big purchase, please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.- patreon.com/sillybutts- buymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting #NerfHPA #HPAnerf #hpa
Lets talk about new screws! (Im switching from 4-40 screws to #4 thread forming screws.) Sillybutts 2024-09-04 | - New screw: mcmaster.com/90434A177 Steel Flat Head Thread-Forming Screw, for Plastic. Phillips, Number 4 Screw Size, 3/8" Long.- Old screw: mcmaster.com/90273A108 Steel Phillips Flat Head Screw. 82 Degree Countersink Angle, 4-40 Thread Size, 3/8" Long.These new screws are SO GOOD!Note: Foxbat should be launching with some of these screws on the OOD shop, as they work through their existing supply of the older 4-40 screws.Very exciting! (For such a small thing lol)
3D Printed HPA Nerf core v9: it’s finally all good! Sillybutts 2024-09-02 | Now that the base HPA core design is pretty much good to go, I can work on adding more features and do longer term durability tests. I'm planning on buying a much bigger Paintball air tank soon so I can do more testing. If you want to help fund that big purchase, please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.- patreon.com/sillybutts- buymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting #NerfHPA #HPAnerf #hpa
Nerf Shell Fed Pump Shotty - Short test firing demo of the first prototype #Nerf #3dPrinting Sillybutts 2024-09-01 | I recorded this weeks ago, but I'm a bit behind on posting stuff to the channel lol.- Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too: stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting
Foxbat: Full blaster overview! (Released Publicly!) Sillybutts 2024-08-31 | Foxbat is a magazine-in-grip, top slide prime, angled talon OR straight talon, HANDCANNON of a pistol!The blaster, hardware kits, and prints are RELEASED! Files are available for FREE on my Printables page! printables.com/model/969546-foxbat-mag-in-grip-handcannon-pistol-printed-nerfHardware kits are available from OutOfDarts and SilverFoxIndustries!- outofdarts.com/products/sillybutts-foxbat-hardware-kit- https://silverfoxindustries.shop/products/foxbat-by-sillybutts-hardware-kitHere's some info:* Top slide prime, T pull prime, and optional PUMP ACTION prime!* Straight Talon and Angled Talon compatible, just swap over the grip and trigger!* Super cheap hardware cost (its like $26 to get a HW kit, almost HALF the cost of a Zinc or Gecko hardware kit).* The blaster was designed around 130-220 FPS spring and barrel combos, but its relatively easy to go as low as 100 FPS, or as high as 270+ FPS!* 9" barrel as standard, compatible with longer barrels for extra power.* Compatible with Worker-style SCARs (DartZone SCAR, Whisker SCAR, etc) (the muzzle is hollow so the SCAR can be pushed into the blaster to reach the standard short 9" barrel just fine).* Compatible with springs 4" long up to \~5.5" long (Talon Claw, Lynx, and Longshot springs all work too! (just like a SLAB)).* Ball detents hold in the magazine, so there's no clunky mag release to deal with.* Innovative pivoting trigger mechanism, with a really smooth and crisp trigger pull!* Upon release, files will be FREE and PUBLICLY AVAILABLE, including STEP and F3D files for you to edit and modify the blaster as you see fit!- Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too: stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting #nerfpistol
Foxbat: Firing Demonstration! (Straight and Angled Talon Magazines) Sillybutts 2024-08-30 | Foxbat is a GIANT handcannon Nerf pistol! Info: Springer. Half Darts. Top slide & T prime. Talon & Angled Talon mags!The blaster, hardware kits, and prints will all be publicly released on August 31st! Files will be available for FREE on my Printables page!- Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too: stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting
Sillys Blasters: Fully Animated Mechanical Demonstrations! (9 blasters!) #Nerf #3danimation Sillybutts 2024-08-27 | Here's some animations I commissioned back in October 2023, for a lot of my blasters that existed at the time :)Timestamps:0:10 - Everything at once1:35 - SLAB1:52 - Alchemist2:12 - Cynthia2:33 - Foxbat3:01 - PBR Bow3:14 - Thumper3:47 - SillyMaxx 14004:16 - Battlemage AEB4:57 - Flintlock MusketThanks to ThePixelatedCat on Discord for doing these animations for me! (paid work)- Check out my Printables page to 3d print these blasters for yourself with FREE files: printables.com/@Sillybutts- Have a look at my website too: stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting #mechanicalengineering
The Foxbat MIG Blaster RELEASES ON AUGUST 31st!! Sillybutts 2024-08-25 | Foxbat is a GIANT handcannon Nerf pistol! Info: Springer. Half Darts. Top slide & T prime. Talon & Angled Talon mags!The blaster, hardware kits, and prints will all be publicly released on August 31st! Files will be available for FREE on my Printables page!Files: printables.com/model/969546-foxbat-mag-in-grip-handcannon-pistol-printed-nerfHere's some info:* Top slide prime, T pull prime, and optional PUMP ACTION prime!* Straight Talon and Angled Talon compatible, just swap over the grip and trigger!* Super cheap hardware cost (its like $26 to get a HW kit from OOD, almost HALF the cost of a Zinc or Gecko hardware kit).* The blaster was designed around 130-220 FPS spring and barrel combos, but its relatively easy to go as low as 100 FPS, or as high as 300 FPS!* 9" barrel as standard, compatible with longer barrels for extra power.* Compatible with Worker-style SCARs (DartZone SCAR, Whisker SCAR, etc) (the muzzle is hollow so the SCAR can be pushed into the blaster to reach the standard short 9" barrel just fine).* Compatible with springs 4" long up to \~5.5" long (Talon Claw, Lynx, and Longshot springs all work too! (just like a SLAB)).* Ball detents hold in the magazine, so there's no clunky mag release to deal with.* Innovative pivoting trigger mechanism, with a really smooth and crisp trigger pull!* Upon release, files will be FREE and PUBLICLY AVAILABLE, including STEP and F3D files for you to edit and modify the blaster as you see fit!- Check out my Printables page here: printables.com/@Sillybuttsprintables.com/model/969546-foxbat-mag-in-grip-handcannon-pistol-printed-nerf- Have a look at my website too: stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting
I got a 3000 PSI air compressor! (Yong Heng) #Nerf #HPA Sillybutts 2024-08-23 | Setup: youtu.be/IyMo5teOoLc?si=seZriXOY_hCi4RRNThank you to everyone who supported me on BuyMeACoffee and Patreon so I could make this purchase! Now I can work on much more HPA stuff :)patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #HPA
Nerf HPA testing with a bike pump! Featuring: the worst camera angle Ive ever used. Sillybutts 2024-08-21 | Featuring: the worst camera angle I've ever used.Tested at 100 PSI and 60-70 PSI.- Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too: stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting
Silly Shell Pump Shotty - Easy and quick spring swaps! Sillybutts 2024-08-20 | - Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too: stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting
Working on another HPA tank prototype. Sillybutts 2024-08-19 | - Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too! stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee. Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting
Pump Action, Shell Ejecting, Nerf Shotgun! Silly Shells! #nerf #3dprinting Sillybutts 2024-08-17 | - Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too! stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee. Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting
Pump Action Shotgun Silly Shell Blaster (Prototype 1) - SUCCESSFUL NERF SHOTGUN! Sillybutts 2024-08-17 | - Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too! stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee. Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting
Nerf HPA 3D printed core: SUCCESS! It’s so powerful! Sillybutts 2024-08-16 | All testing was done at 100 PSI.- Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too! stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee. Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting
HPA Pneumatic Cylinder testing! Sillybutts 2024-08-15 | - Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too! stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee. Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting
Thanks for the support. (Also, I need a haircut) Sillybutts 2024-08-14 | - Check out my Printables page here: printables.com/@Sillybutts- Have a look at my website too! stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee. Blaster development costs A LOT, and I don't earn much.patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting
A little heart-to-heart discussion. (Money, time, support, job stuff... honesty.) Sillybutts 2024-08-09 | - Check out my Printables page here: printables.com/@Sillybutts- And please consider donating via Patreon or BuyMeACoffee. patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dprinting Edit: Someone recommended I enable YouTube channel memberships, so I've done that. FWIW, I prefer that people use Patreon, as it gives me more control over stuff as a creator vs YouTube's system.
HPA Nerf Blaster: Sand Shark (First prototype and post-mortem) #Nerf #3dprinting (Cosmic Nomad core) Sillybutts 2024-08-07 | Most of the firing is at 8:40 btw.TL:DR, the trigger mechanism closes the breech, then fires the HPA core. The trigger/breech bit doesn't work well, but the HPA bits and the breech and barrel work excellently. So I'll reuse those bits and make this a manual bolt action operated HPA setup. Or use a pneumatic cylinder for semi-auto.And that's okay! First prototypes are meant for figuring out stuff like this. Sometimes, stuff doesn't work out, but things can still be learned from the design process. And aspects of a design can be reused elsewhere :)- Check out my Printables page here: printables.com/@Sillybutts- and my GitHub here: github.com/Sillybutts- Have a look at my website too! stuffbysilly.com- And please consider donating via Patreon or BuyMeACoffee. Filament costs add up quick! patreon.com/sillybuttsbuymeacoffee.com/sillybutts#Nerf #3Dmodeling #3dPrinting
Shiny smooooth ironed print :) Sillybutts 2024-08-06 | Print ironing! wiki.bambulab.com/en/software/bambu-studio/parameter/ironing Its a setting in the slicer that basically runs the hot nozzle over the surface of the print, smoothing out any lines.
Foxbat Pistol FINAL PROTOTYPE Overview & Firing Demo! #nerf #3dprinting Sillybutts 2024-07-26 | Expect release some time in the next month or two!
LOTS OF NEW SILLY SHELLS! BoomCo, Nerf N1, sticky head, .50cal foam ball, over/under, and more! Sillybutts 2024-07-24 | I've added a ton of new shells to the Silly Shell lineup on Printables!printables.com/model/880038-silly-shells-for-homemade-nerf-blasters- **N1 dart** 1x, 2x, and 3x shells- **BoomCo Straw** 1x, 2x, 3x, and 4x.- - *Note: I prototyped 5x and 6x BoomCo shells, but the straws are just too tightly packed in that form factor. I'd really rather not deform or break ammo that is no longer produced, so I will not be releasing the 5x and 6x shells.*- **.50 Cal foam ball** shells. 6x balls for the single barrel shell, 10x balls for the double barrel shell!- **Wide head full length dart** shells (wide head darts such as stickies, whistlers, taggers, or suction darts), 1x 2x and 3x.- A **“over-under”** shell that holds 2 full length darts AND 1 Mega dart, and fires all 3 at the same time!All of these are now up on the Printables page :)I also updated the MXL and Mega shells to hold worn darts a bit better.
Wildstyle But Bigger - prototype extra support towers for the PTfront and PTback Sillybutts 2024-07-17 | ...
BoomCo Straw Silly Shell Prototype! Sillybutts 2024-07-12 | Now released! printables.com/model/880038-silly-shells-for-homemade-nerf-blasters
Free files in description: 3D printed Nerf demolisher missile container! #3dprinting #toys #nerf Sillybutts 2024-07-06 | Free files on my printables page: printables.com/model/880469-nerf-rocketmissilearrow-shaped-storage-containers
GIANT NERF DART 3D Print files linked in description! #3dprinting #nerf #toys #prop Sillybutts 2024-07-06 | #nerf #3dprintingTons of different parts to mix and match to make any giant dart your heart desires! Free files on my Printables page: printables.com/model/880459-nerf-dart-shaped-storage-containersMake Elite darts, half darts, Suction Tipped darts, Mega, Ultra, N1, Dart Zone darts, Stefans, and more and more and more!
FILE RELEASE: Giant Nerf Darts & Rockets & Vortex Discs which are screw-top containers! DESCRIPTION! Sillybutts 2024-07-05 | This is a giant release I've been working on for over 2 years: **giant darts and other foam ammo used as screw-top lid storage containers!** Also, a giant Vortex disc used as a drink coaster :)--------------------------------------------------------------------------------------------------------------------**Dart Shaped Storage Containers** printables.com/model/880459-nerf-dart-shaped-storage-containersThese are a set of modular screw-top storage containers! You can scale them to any size you want, to store anything from toothpicks to darts, or even scale it larger to hold drink cans or snacks!There are over 30 different modules for different sized dart foam, bamboo darts, different heads from Nerf, Dart Zone, BuzzBee, Worker, and old school Stefan heads, and much more!Mix and match heads and foams to make any sort of foam dart, from Ultra to Worker Heavies, from gluedome stefans to Mega XL darts. The sky's the limit!(also Nerf's new N1 dart too)--------------------------------------------------------------------------------------------------------------------**Nerf Rocket/Missile/Arrow Shaped Storage Containers** printables.com/model/880469-nerf-rocketmissilearrow-shaped-storage-containersThis is a second set of screw-top storage containers, this time themed after larger size foam ammo: Demolisher Missiles/Rockets, and old school Nerf rockets/arrows/missiles (I love that Nerf never nails down the names for these things lol)Just like the darts, these can be scaled to fit anything you want inside. The old school rocket/missile/arrow is also a modular design that lets you stack multiple containers together into one giant rocket-thing!--------------------------------------------------------------------------------------------------------------------**Vortex Disc Drink Coaster** printables.com/model/880461-giant-nerf-vortex-disc-drink-coasterThis is a giant Vortex Disc which can be used as a prop, as decoration, or as a drink coaster! Just scale it appropriately in your slicer to fit your mugs/cups/cans/whatever you want :)--------------------------------------------------------------------------------------------------------------------All of these files are now up on Printables, FOR FREE, along with source files for people to make their own modules or adapt the designs as they wish!I'm really happy to finally have this release out the door and done, and I hope you all enjoy them as much as I do :)--------------------------------------------------------------------------------------------------------------------#nerf #3dprinting #prop
