NBR Works
I Spent 500 Hours Making This Tool... And I Had to Let It Go
updated
Some say the draw wasn’t rigged, but after running that Python script five times and getting the exact same output, I have my doubts.
Anyway, I had big plans for the Boss — only challenged by the fact that 2025 is one of those years with only 12 months.
That, and the videos had to be out in August. Mid August, "not the end" - I was told. Oh, and there was something about the shipping time...
Between the drawing and sending my "gift", I had 1 week to make this project. I feel like it was more like 5 days. Part time. Don't expect much.
For the same reason, there wasn't much time to make a proper educational video, so today you're getting something else. Call it entertainment?
500V is a lot to play with, especially when you have a very basic understanding of electronics.
"Safety first" is not only a great motto, but also something I didn’t have time to address in this *entertainment* video.
Seriously, building amplifiers is cool, but you can die. If you do, I had nothing to do with it.
Finally, I got something from Alec Steele, and got my MK1 Mini out of the garage for the first time in 5 years.
Would you like to see it more often? Let me know.
----------------------------------
Erik's video: youtube.com/watch?v=g4w1tHTNnhc
Alec Steele's video: youtube.com/watch?v=WH8rD7gCjv0
Toolroom Takeover 2025 playlist: youtube.com/playlist?list=PL2ISTNaXIkzC2s9OMVn2EnkT_c3g7JU9-
----------------------------------
Support me on Patreon: patreon.com/nbrworks
----------------------------------
Checkout Uraltone's website: en.uraltone.com
Uraltone specializes in music gear, including DIY amplifier kits and pedals for guitar, bass, and hi-fi amplifiers.
----------------------------------
KBC:
kbctools.com
Use discount code *60KBC1965NBR* at checkout for $60 off on orders over $250.
In order to apply the code you need to be registered and signed in.
My KBC tools:
Mitutoyo digital micrometer: kbctools.com/itemdetail/1-808-293348
Ultra thin parallel set: kbctools.com/itemdetail/1-801-280
Kant twist clamp: kbctools.com/itemdetail/1-532-405
Edge milling vice stop: kbctools.com/itemdetail/1-811-14000
NOGA deburring tool set: kbctools.com/itemdetail/1-457-525
Cratex rubberized stick: kbctools.com/itemdetail/1-614-6404M
Starrett bi-metal bandsaw blade: kbctools.com/itemdetail/1-856-16228
Small precision vice: kbctools.com/itemdetail/1-814-015
----------------------------------
*The following are affiliate links for which I may be compensated:
My other tools:
Bambu Lab X1 Carbon: tidd.ly/4fLRbVU
Bambu Lab Filament: tidd.ly/4fPQgnn
Diamond files: amzn.to/4f0kIcu
Headband magnifying glasses: amzn.to/4k2RFsg
3M mask: amzn.to/4dsojky
3M 5935 particulate filters: amzn.to/4dxjV3S
3M 6001 organic vapor cartridge: amzn.to/3YRiMOn
UV light - 100W / 365nm: amzn.to/3HBsqz9
Creality Falcon2 22W diode laser: amzn.to/45QFDgJ
Even more tools:
nbrworks.com/tools
----------------------------------
You can get the 3D print files for the PCB stand shown in the video here:
thingiverse.com/thing:1103401
Note: this is a 10 year old project now, and tolerances come out very different with modern printers.
I had to redesign several parts to make it work. A 12mm reamer was also necessary.
----------------------------------
Inspirational videos:
Make With Miles - Cool Kumiko amplifier - plus he wears a Pask Makes shirt ;) youtube.com/watch?v=Z9ktKZRPKvU
Electronoobs - Homemade PCB: youtube.com/watch?v=PoYcjyghDx4
----------------------------------
Music from epidemicsound: share.epidemicsound.com/0dlkzu
----------------------------------
Tube amp image @ 16:30: Fender Bandmaster Reverb amplifier chassis, by Rob Robinette — CC BY-SA 4.0, via Wikimedia Commons
en.wikipedia.org/wiki/File:Bandmaster_Reverb_Chassis_Again.jpg
----------------------------------
#ToolroomTakeover2025
3D models shown in the video: patreon.com/nbrworks
My tools: nbrworks.com/tools
-------------------------------------------------
* The following are affiliate links and I may be compensated for purchases
-------------------------------------------------
Vevor 5% discount (any product): VEVR5OFF
Vevor sharpeners:
MR-13A (split-point up to 13mm): US: https://s.vevor.com/bfRPFP | EU: https://s.vevor.com/bfRRME
MR-13B (web-thinning up to 13mm): US: https://s.vevor.com/bfRPFA | EU: https://s.vevor.com/bfRx0Z
MR-20G (web-thinning up to 20mm): US: https://s.vevor.com/bfRRMR | EU: https://s.vevor.com/bfRRM0
-------------------------------------------------
Bambu Lab:
Bambu Lab X1 Carbon: tidd.ly/4fLRbVU
Bambu Lab Filament: tidd.ly/4fPQgnn
-------------------------------------------------
More tools:
Sharpening gauge (118º): amzn.to/4dqJ6Fh
Sharpening gauge (118 + 135º): amzn.to/43nbSSu
Cobalt drill set: amzn.to/4jZWF0C
Vevor sharpeners: amzn.to/4j5DS2D
Diamond files: amzn.to/4f0kIcu
Headband magnifying glasses: amzn.to/4k2RFsg
Single point diamond dresser (1/2"): amzn.to/4dlnJVA
3M mask: amzn.to/4dsojky
3M 5935 particulate filters: amzn.to/4dxjV3S
3M 6001 organic vapor cartridge: amzn.to/3YRiMOn
Demagnetizer: amzn.to/4kEGrdb
Some vitamin C (you know you need it): amzn.to/431T6RG
-------------------------------------------------
Chapters:
00:00 You won't learn much in 1 minute
02:13 Most common drill types
05:13 Popular point angles
08:56 Cutting tools need clearance
12:13 Before sharpening
14:40 Basic sharpening by hand (conical points)
19:04 Web thinning
22:05 Split point drills
26:06 Quick recap
27:43 How I started sharpening drill bits
30:19 The easy way out - sharpening with the MR-13B Vevor drill sharpener
42:40 More drills?
44:10 Shank maintenance
45:21 What about the flutes?
46:39 4 facet
52:13 Buy cheap, buy twice
54:53 Sharpening BIG drills (not that big...)
01:01:53 Drills for brass
01:02:48 Results
-------------------------------------------------
FPF 2" vacuum cleaner adapter for the Vevor sharpeners: youtube.com/watch?v=j77kkCCJUzM
*Patreon:* patreon.com/nbrworks
*Tools I use:* nbrworks.com/tools
*Paint - VHT Wrinkle Plus:* amzn.to/4jI8SY4
Disclaimer: I may earn a small commission (at no additional cost to you) from purchases made through the links above.
*KBC Tools & Machinery*
PROMO code - $60 off on orders above $250: 60KBC1965NBR
Edge vice stop: kbctoolsmachinery.sjv.io/WyQXVG
Noga deburring tool set: kbctoolsmachinery.sjv.io/6yMW4V
Cratex stick: kbctoolsmachinery.sjv.io/vP6zAO
Inspiration videos:
Mr. Whoopee's threading tool: youtube.com/watch?v=IkVTmoTLeWs
Cut knurling: youtube.com/watch?v=jNCAGeJN01A
EM-Smart US site: bit.ly/4ee1UGv
EM-Smart EU site: bit.ly/3NeBCIP
My Patreon: patreon.com/nbrworks
Tools I use: nbrworks.com/tools
Have you ever used a fiber laser at home? What do you use it for?
I've had mine for about a month and the potential is huge.
It's also the tool I was looking for to finish off one of my next projects, so you'll definitely see this laser again.
#fiberlaser #emsmart #blackfriday
00:00 Another way to make layout lines
01:45 Meet the Basic 1R
05:15 Software
06:06 Making a fixture plate
06:27 Calibrating and focusing
07:18 Engraving steel
08:04 Engraving 3D prints (plastics)
08:28 Rust removal
10:44 EM Smart's air purifier
11:25 EM Smart's enclosure
13:33 Fiber laser rotary
15:45 Real time engraving steel (4140)
Helpful videos:
Calibrate lens: youtube.com/watch?v=x08cRPkyToc
Calibrate red laser (framing): youtube.com/watch?v=2Ec4-F49aV0
Calibrate timings: youtube.com/watch?v=gFvbrNnvijo
Photos: youtube.com/watch?v=EB40S6AEVwE
DISCLAIMER: fiber lasers, or lasers in general, are dangerous machines that should be operated carefully. Safety glasses, certified for the wavelength of the laser should be worn at all times. NBR Works can not be held liable for any harm caused by the use of lasers or any other machine.
Tools I use: nbrworks.com/tools
Chronos Ltd website: chronos.ltd.uk
- Dasqua parallel set: chronos.ltd.uk/product/dasqua-precision-machinist-tools-premium-parallel-bars-set-with-aluminum-case
- Dasqua digital indicator: chronos.ltd.uk/product/dasqua-absolute-digital-dial-indicator
- Dykem engineers blue: chronos.ltd.uk/product/dykem-80300-engineers-steel-blue-layout-fluid-4oz-118ml-brush-in-cap-bottle
#lathe #diy #machineshop
youtu.be/QxA8PfQkfNg
Tools I use: nbrworks.com/tools
Thanks Joe Pie for the idea: youtube.com/watch?v=J1RFTRzuAcU
#lathe #diy #machineshop
youtu.be/M5UhrqSyetk
Tools I use: nbrworks.com/tools
And thanks to Joe Pie for sharing: youtube.com/watch?v=U3x8H1Xb-jg
#lathe #diy #machineshop
youtu.be/5qYqlkox28A
Tools I use: nbrworks.com/tools
Timestamps:
00:00 The one and only 4 stroke laser engraver
00:53 Creality Falcon2
01:56 Basics first
06:30 The Dovetail Cutters are back!
08:56 Cutting silicon rubber
10:00 Marking Metals (4140, aluminum, brass)
13:58 Final thoughts
Creality Falcon2 22W: https://s.zbanx.com/r/ONX8RvP2EWkQ
Code: NEWFALCON
DTC link: store.creality.com/eu/products/falcon2-22w-laser-engraver-cutter?aid=zbyt0001
Code: FN1106B
Valentine's Day activities
Discount range 70$-500$
Time:1st-28th February
Code for 22W:VDFALCON
Code for 40W:VDFALCON9
Accessories:
Large honeycomb: https://s.zbanx.com/r/LeizCaOPtB82
Enclosure: https://s.zbanx.com/r/k36XTSvWI0VK
Rotary kit Pro: https://s.zbanx.com/r/daARrdXADLmp
#diy #laserengraving #CrealityFalcon2, #CrealityLaserEngraver, #22WFalcon2
Creality social media:
YouTube: youtube.com/@FalconLaserOfficial
FB Group: facebook.com/groups/falconlaserengraver
Brilliance sprays:
Black Metal laser spray: amzn.to/42Vb8mQ
Black Aluminum Marking spray: amzn.to/42TeGpR
* note: the above links are affiliate links
youtu.be/Ustr75lWiIo
Tools I use: nbrworks.com/tools
Timestamps:
00:00 I did it again
00:40 Machining a new dovetail cutter
10:30 Re-sharpening an HSS dovetail cutter
12:42 U3 grinder dividing head - the challenge with 10 flute cutters
14:52 Testing the new cutter
#lathe #diy #machineshop
youtu.be/-gWCOr1DtJU
Curiosity took the best of me this time and I'll be making a Spring type part-off tool holder to support 2 different blades.
Tools I use: nbrworks.com/tools
Blade used in the video (affiliate link): amzn.to/47jsJWx
Timestamps:
00:00 Hello
00:19 My new part-off blade
01:05 Let's make a blade holder
03:14 Cutting the AXA tool holder dovetail
05:31 Figuring out the blade position
07:02 Machining a slot for the blade
09:04 Making the blade clamp
12:22 Big chamfer on the front
12:53 Old me parting-off
13:26 Thanks Winky's Workshop
13:55 Let it flex
14:45 Tool holder height adjuster
14:56 Knurling
16:40 Broken tap
19:55 Finished tool holder
21:51 Tests: mild steel
24:17 Tests: 4140
25:18 Tests: Stainless Steel
27:20 Tests: Aluminum
27:59 Conclusion
#lathe #diy #machineshop
All functional credit of this tool goes to the Winky's Workshop youtube channel, namely the inspiration given by this video: youtube.com/watch?v=s9qcd5-wj3c
youtu.be/1hzzVow7MHI
Issues range from heavy chatter to broken inserts and tools which end up stalling the motor and sometimes damaging the work done on a part.
Today we're making a solid tool post mount to replace the compound (top slide). The compound on small lathes is known to have rigidity issues and that's what we're looking to upgrade.
Tools I use: nbrworks.com/tools
Have a look at these other videos that served me as inspiration for mine:
Robin Renzetti's: youtube.com/watch?v=pG3YSfgyJPI
Phil Vandelay's: youtube.com/watch?v=Y3N5k4rmf9o
Stefan Gotteswinter's: youtube.com/watch?v=bLn0Ch1_KQM
Timestamps:
00:00 The why
01:07 Squaring cross-slide register slots
02:23 (Kind of) Squaring a cast iron block
03:24 Solid mount registration feet
05:25 Improving top/bottom parallelism
07:20 Machining angled ends
07:48 Fitting the Quick Change Tool Post
11:20 Cold blueing
11:36 Replace the compound with the Solid Tool Post Mount
13:27 Parting off tests (12L14, 4140, 304 stainless)
#lathe #diy #machineshop
youtu.be/kJhBPm7hkec
Today we're going to replace the 3-jaw chuck with a 6-jaw, rebuild the tailstock and have a look into a problem I run into in the early stages of the rebuild.
After that we'll go through the necessary adjustments to align the lathe so that a straight part can be cut. This includes the tailstock alignment.
The video ends with a quick word about the rebuild and the future of the channel.
Tools I use: nbrworks.com/tools
Timestamps:
00:00 Intro
00:26 A test bar that didn't help
01:58 Replacing the 3-jaw chuck with a 6-jaw
04:18 3D printed parts
05:37 First chips!
07:15 Tailstock rebuild
08:53 Lathe alignments
11:29 Tailstock alignment
12:18 The thread dial indicator
13:25 Lathe rebuild conclusion
13:50 Youtube and what will come next
Lathe: HBM 250x550 Profi Vario
Lathe rebuild playlist- youtube.com/playlist?list=PLQmkDSE3SwYu6sWilKMYVBtqX7Vr8Qr-_
#machining #lathe #diy
youtu.be/iltm3g3qBb0
We'll go through the apron where I spent hours deburring all the parts (but that's boring, I'm saving you from that), then we'll replace the 4 way tool post with an Aloris replica (wedged quick change type) and finally we'll look into the gearbox that allows to reverse the direction of the lead screw and easily select one of 3 feeding speeds according to the change gears mounted.
We'll also briefly look into the compound, which was thoroughly deburred, but not lapped (I didn't feel the need to).
Since I had too many hours of footage to process and squeeze in a short video, I've chosen to go over some clips in fast forward. If you have a similar lathe and want to look into something specific in detail, leave a comment down below, I might have the footage and I'll be glad to help.
Finally a note to my colleagues at work: I hope this serves as proof as to why on Monday mornings I was showing up at work with blue fingernails - No, I'm not 'having fun' during the weekend.
Tools I use: nbrworks.com/tools
Timestamps:
00:00 First chips
00:14 Meet my lathe's apron
00:45 How the apron works
02:51 Getting the apron back together
03:35 The new Quick Change Tool Post (QCTP)
06:24 The gearbox
06:43 Something about crash type gears
08:02 Closing the gearbox
08:35 Adding magnets to the gearboxes oil plugs
08:54 A steel plate and rigidity
09:35 Closing
Lathe: HBM 250x550 Profi Vario
Lathe rebuild playlist: youtube.com/playlist?list=PLQmkDSE3SwYu6sWilKMYVBtqX7Vr8Qr-_
#machining #lathe #diy
youtu.be/0ktNqw_muUY
There might be a few things missing (like 'levelling' the bed before anything else), it was too much footage to squeeze in a short video.
Anyway, I hope this helps someone out there; at least you can look at some parts of the lathe that you couldn't otherwise without taking it apart.
Tools I use: nbrworks.com/tools
Timestamps
00:00 The bed
02:43 The saddle
05:18 The headstock
06:30 New spindle bearings
08:33 Spindle runout
09:35 Electrics
10:03 Putting it back together
11:05 Running
Note: I'm not a professional and this is not a tutorial. This is just a careful reassembly with some improvements and compromises in order to have a working lathe in a short term. Be mindful of warranty loss if you choose to do this on a new machine.
Lathe: HBM 250x550 Profi Vario
Lathe rebuild playlist: youtube.com/playlist?list=PLQmkDSE3SwYu6sWilKMYVBtqX7Vr8Qr-_
#lathe #diy #machining
Credits:
Scraping clip at 04:21 is from Abom79/Lance Baltzley's video: youtube.com/watch?v=LqYejmEmPJA&t=726s
Music: Quincas Moreira | Bunny Hop
youtu.be/ncJ7_ZoLpDM
I hope this might help someone with a similar micrometer.
Tools I use: nbrworks.com/tools
00:00 Introduction
00:27 Tool description
01:09 Condition check - out of calibration
02:43 Disassembly and inspection
06:46 Fixing spindle backlash
08:02 Reassembly
11:46 Calibration
15:28 Final check
#tools #machining
youtu.be/sRxCYsKyuFA
This tool will help press fitting thin long rods in a shop press. The collet chuck will be fitted to the end of the piston and there's a jig on the press plate to keep things repeatedly in place (and square). The chuck has no through hole as the the bottom of the ER taper will be pushing the rods down, not the collet.
Tools I use: nbrworks.com/tools
00:00 Raw stock
00:37 Turning and polishing
04:29 Setting up the 4 jaw chuck
06:00 Changing gears for threading
06:59 Single point threading M40x1.5
10:18 Cutting the ER32 taper
14:02 Tolerance check
Tolerance check was done with a bar turned in this lathe, not a ground bar as I don't have any.
Lathe: HBM 250x550 Profi Vario
#machining #lathe #tools
youtu.be/W0IYNqL8GR0
Tools I use: nbrworks.com/tools
00:00 Turning
05:11 Milling (slotting)
16:02 Making a tool to thin down H2 and H4 butterflies
21:23 Thinning down original butterflies
23:49 Making new screws
#machining #lathe #classicminibarbie
youtu.be/qad2iq4FVc0
I just got a new HBM 250 x 550 metal lathe delivered. This is a small import lathe with 10 inches of swing and 22 inches between centers. It's very similar to the PM-1022V available in the US from Precision Matthews or Grizzly's G0752 (this without power cross feed).
I took it apart to get it cleaned and get to know it better. I might be making some improvements as I put it back together, so watch out for my next videos.
Tools I use: nbrworks.com/tools
Lathe: HBM 250x550 Profi Vario
Lathe rebuild playlist: youtube.com/playlist?list=PLQmkDSE3SwYu6sWilKMYVBtqX7Vr8Qr-_
#hobbymachinist #minilathe
youtu.be/SRLmudboZ7o


