Levitation Melting (Copper) with Induction Heating Ambrellinduction 2026-09-29 | Levitation Melting (Copper) with Induction Heating
Levitation Melting Using Induction Heating Ambrellinduction 2022-10-04 | A levitation melting application tested by THE LAB at Ambrell. More on levitation melting:ambrell.com/induction-heating-applications/levitation-melting#inductionheating #levitationmelting #inductionmelting
Brazing a Drill Bit with Induction Heating Ambrellinduction 2022-08-29 | In this video from THE LAB at Ambrell, a drill bit is brazed with an Ambrell EASYHEAT induction heating system. To learn more visit brazing.ambrell.com. #brazing #inductionheating #inductionbrazing
THE LAB in Mexico Ribbon Cutting (Ambrell) Ambrellinduction 2022-05-12 | Ribbon cutting for the new induction heating applications laboratory in Monterrey Mexico.
THE LAB at Ambrell Ambrellinduction 2022-01-11 | Learn more about THE LAB at Ambrell, an induction heating applications laboratory, including the free parts testing service it offers. thelab.ambrell.com
Induction Annealing Magnetic Steel Strips Ambrellinduction 2021-04-21 | Other induction heating applications:ambrell.com/induction-heating-applicationsIn this application video THE LAB at Ambrell is heating a magnetic steel strip for an annealing application. They are heating a 5” segment using an Ambrell EASYHEAT 4.2 kW induction heating power supply.
Corporate Video: Ambrell Induction Heating Solutions Ambrellinduction 2020-02-28 | Learn more about Ambrell and what makes our induction heating solutions different. And, for more information, visit: ambrell.com/about-ambrell
Induction Heating a Steel Rod for Forging Ambrellinduction 2019-07-25 | To learn about more induction applications, check out our application notes:ambrell.com/induction-heating-applicationsIn this application video, a steel rod is heated for forging with an Ambrell EASYHEAT induction heating system. Testing was conducted by THE LAB at Ambrell.
Induction Preheating for Hard Facing Ambrellinduction 2019-05-06 | To learn about more induction applications, check out our application notes:ambrell.com/induction-heating-applicationsIn this application video, a part is preheated for a hard facing application with an Ambrell induction heating system. Testing was conducted by THE LAB at Ambrell.
Hardening a Fastener Tip with Induction Heating Ambrellinduction 2019-03-15 | For additional application videos visit:ambrell.com/learn/application-videosThis application video involves hardening a fastener tip using an Ambrell EKOHEAT induction heating power supply with a channel coil.
Annealing a Steel Part with Induction Heating Ambrellinduction 2018-12-18 | For additional application videos visit:ambrell.com/learn/application-videosThis application video involves annealing a steel tool using an Ambrell EKOHEAT induction heating power supply with a three-turn channel coil.
Heating a Gear for Shrink Fitting with Induction Ambrellinduction 2018-11-19 | Visit our website to check out more shrink fitting application videos from THE LAB at Ambrell:ambrell.com/induction-heating-applications/shrink-fitting/videosIn this application video, an Ambrell EASYHEAT 6 kW induction heating power supply is used to heat the steel gear to 400 F / 204 C.
Induction Hardening a Cutting Tool Ambrellinduction 2018-10-31 | For more application videos visit:ambrell.com/learn/application-videosIn this application video we are through-hardening a part for a cutting tool. A pyrometer is set up on the lower left-hand corner edge of the part. Heating will be delivered through an Ambrell EASYHEAT induction heating system.
Induction Heating Steel Molds for Plastic Tube Forming Ambrellinduction 2018-10-24 | For more application videos visit: ambrell.com/learn/application-videosAn Ambrell EASYHEAT 2 kW power supply was used with a two-position coil in this video. The steel molds successfully heated to temperature.
Heating Brass Inserts for Metal-to-Plastic Insertion with Induction Ambrellinduction 2018-07-02 | Click below to read about other metal-to-plastic insertion applications:ambrell.com/induction-heating-applications/metal-plastic-insertionIn this video, two brass inserts are heated to temperature with an Ambrell EASYHEAT 2 kW induction heating system.
Heating a Bar for Hardening Ambrellinduction 2018-06-20 | Click below to read about other hardening applications:ambrell.com/induction-heating-applications/hardeningIn this video, a bar is hardened with an Ambrell EASYHEAT induction heating system. THE LAB at Ambrell assessed the application.
Heating an Aluminum Housing for Shrink Fitting Ambrellinduction 2018-05-29 | Click below to read about other shrink fitting applications:https://www.ambrell.com/induction-hea...In this video, an aluminum housing is heated for a shrink fitting application with an Ambrell induction heating system. THE LAB at Ambrell assessed the application.
Heating a Steel Sleeve for Shrink Fitting with Induction Ambrellinduction 2018-05-25 | Click below to read about other shrink fitting applications:ambrell.com/induction-heating-applications/shrink-fittingIn this video, a steel sleeve is heated for a shrink fitting application with an Ambrell EKOHEAT 30 kW induction heating system. THE LAB at Ambrell assessed the application.
Soldering a Fiber onto a Pin with Induction Heating Ambrellinduction 2017-12-01 | To see annealing application notes from THE LAB at Ambrell:ambrell.com/induction-heating-applications/solderingIn this video, an Ambrell EASYHEAT induction heating system is used to solder a fiber onto a pin.
Heating a Carbide Sample Ambrellinduction 2017-11-16 | Click here to see application notes from THE LAB at Ambrell:ambrell.com/induction-heating-applicationsIn this application video, we're heating a carbide sample with an Ambrell EASYHEAT induction heating system. The end product is a cutting bit. Heating takes just 15 seconds.
Annealing the Tip of a Steel Part Ambrellinduction 2017-11-08 | Click here to see annealing application notes from THE LAB at Ambrell:ambrell.com/induction-heating-applications/annealingIn this video, an Ambrell EASYHEAT induction heating system is used to anneal the tip of a steel part in just three seconds.
Hardening a Steel Fitting with Induction Ambrellinduction 2017-04-11 | Check out some hardening application notes on our website:ambrell.com/induction-heating-applications/hardeningIn this application video, a steel fitting is heated using an Ambrell EASYHEAT induction heating system. The duration of heating is 12.5 seconds and then the part is quenched.
Heating a Steel Rod for Forging with Induction Ambrellinduction 2017-02-21 | To learn about complimentary parts testing from THE LAB visit:http://thelab.ambrell.comIn this application video, we are heating a steel tube for forging with an Ambrell EKOHEAT 15 kW induction heating system.
Introducing Ambrell SmartCARE Ambrellinduction 2017-01-31 | ambrell.com/smartcare-serviceSmartCARE aims to maximize uptime, extend product life and reduce the energy consumption of your Ambrell equipment. It includes four key offerings: preventative maintenance, extended warranties, equipment training and spare parts.
Annealing a Tube with Induction Heating Ambrellinduction 2016-10-18 | To learn about complimentary parts testing from THE LAB visit:http://www.ambrell.com/services/applications-labIn this application video, we are annealing a tube with an Ambrell EKOHEAT 15 kW induction heating system.
Melting Zinc Off of a Bar with Induction Heating Ambrellinduction 2016-05-26 | To learn more about complimentary parts testing from THE LAB visit: http://www.ambrell.com/services/applications-labIn this video we are melting the zinc off of a 1” (25.4 mm) section of this bar. We are using an Ambrell EASYHEAT 2 kW induction heating system.
Annealing a Copper Strip with Induction Heating Ambrellinduction 2016-05-19 | To learn more about complimentary parts testing from THE LAB visit:ambrell.com/services/applications-labIn this application video, we are annealing a copper strip with an Ambrell EASYHEAT 4.2 kW induction heating system.
Brazing a Carbide to Steel Ambrellinduction 2016-05-17 | To learn about more induction heating applications visit:ambrell.com/induction-heating-applicationsIn this application video a carbide is brazed to steel using an Ambrell EASYHEAT 5kW induction heating system. Complimentary parts testing was conducted by THE LAB at Ambrell.
Tempering a Cutting Tool with Induction Ambrellinduction 2015-01-12 | To learn about more induction heating applications visit:ambrell.com/induction-heating-applicationsIn this application video a cutting tool is heated to 1400 degrees F (760 C) for a tempering application with an Ambrell EKOHEAT 15 kW induction heating system. Temperature indicating paint is on the cutting tool, and it’ll turn clear at 1400 degrees F. The EKOHEAT is running at 130 kHz and will be able to handle various diameters of steel tools. The Auto-Tap feature available in the EKOHEAT will reduce the need to change hardware settings in the machine. The part heated to temperature in just 30 seconds.
Brazing a tube and a fitting with induction Ambrellinduction 2014-11-20 | To learn about more induction applications visit the following link:ambrell.com/induction-heating-applicationsUsing an Ambrell EASYHEAT induction heating system, a tube and fitting were heated to brazing temperature in less than 30 seconds.
Wire Heating with Induction Ambrellinduction 2014-10-15 | This application video involves wire heating. For more information and applications visit:ambrell.com/induction-heating-applications/annealing
Ambrell Induction Nanoparticle Heating Kit Ambrellinduction 2014-10-07 | Learn about the Ambrell Nanoparticle Heating Kit and all of the temperature measurement options. To learn more about Ambrell's nanoparticle heating systems visit ambrell.com/induction-heating-brochures/nanoparticle-heatingor call +1 585-889-9000.Temperature Measurement Options:Fluke Meter: 5:34Photon Control Unit: 7:00Photon Control Unit and Yokogawa Unit: 11:24
Brazing Carbides to Steel - Oil Industry Ambrellinduction 2014-09-24 | For more information visit:ambrell.com/induction-heating-brochures/brazing-drill-bitsIn this application video we are brazing the carbides to the steel faces with an EASYHEAT LI induction heating system. The end product is a pipe gripper for the oil industry
Annealing Ammunition Casings with Induction Ambrellinduction 2014-09-17 | For more information visit: ambrell.com/induction-heating-applications/annealingIn this video, an Ambrell EKOHEAT 30 kW induction heating system is used for annealing an ammunition casing.
Brazing a carbide to copper with induction Ambrellinduction 2014-09-15 | For more induction heating applications visit:ambrell.com/induction-heating-applicationsIn this application video we are brazing the carbide to copper using an Ambrell EASYHEAT 1 kW induction heating power supply.
Bending a steel pipe with induction Ambrellinduction 2014-07-17 | For more application information visit:ambrell.com/induction-heating-applicationsIn this application video we're using an Ambrell EKOHEAT 100 kW / 10 kHz induction heating system to heat this magnetic steel pipe to 2010 F or 1099 C for bending or hot forming. The end product is a u-pipe for a boiler system.
Soldering a copper disc with induction heating Ambrellinduction 2014-06-20 | For more induction heating applications visit: ambrell.com/induction-heating-applicationsIn this application video we are soldering copper rings and plate inserts with an Ambrell EASYHEAT LI induction heating system. The end product is for an electrical application. The process takes just a couple seconds.
Soldering a tube to a fitting with induction Ambrellinduction 2014-06-20 | For more induction heating applications visit: ambrell.com/induction-heating-applicationsIn this application video we are heating the tube to the fitting for a soldering application. The end product is a faucet. We are using an Ambrell EASYHEAT 2 kW induction heating system. The assembly is being heated to approximately 450 F and the heating time is 20 seconds. This client is switching to induction from a torch to improve process repeatability.
Melting iron blocks with induction heating Ambrellinduction 2014-05-16 | For more information about induction melting application, visit this link: ambrell.com/induction-heating-applications/meltingIn this application video, we are melting iron blocks with an Ambrell EASYHEAT 2 kW induction heating system.
Brazing a copper assembly with induction heating Ambrellinduction 2014-04-17 | For our brazing application notes visit:ambrell.com/induction-heating-applications/brazingIn this application video, we are heating the copper connector and pin for a brazing application. We are using an Ambrell EASYHEAT 1kW induction heating system.
Brazing a copper rod and bracket with induction heating Ambrellinduction 2014-04-16 | For our brazing application notes, visit: ambrell.com/induction-heating-applications/brazingIn this application video, we are heating a copper rod and copper bracket to brazing temperature. We are using an Ambrell EASYHEAT 10 kW induction heating system for this application.
Annealing a brass tube with induction heating Ambrellinduction 2014-04-11 | For our annealing application notes, visit: ambrell.com/induction-heating-applications/annealingIn this application video, we are annealing a brass tube with an Ambrell EASYHEAT induction heating system.
Forming steel parts with induction heating Ambrellinduction 2014-04-11 | For more induction heating applications visit:ambrell.com/induction-heating-applicationsIn this application video, a steel part is heated to 1100°F for a forming application. An Ambrell EKOHEAT 65 kW/100 kHz induction heating system is used for this application.
Debonding tubes from a compressor head with induction Ambrellinduction 2014-04-04 | For more induction heating applications, visit: ambrell.com/induction-heating-applicationsIn this application video, an Ambrell EASYHEAT LI is used to heat the assembly and enable the aluminum tubes to be removed from the aluminum compressor head.
Brazing a brass fitting to a brass tube with induction Ambrellinduction 2014-04-04 | For more induction heating applications, visit: ambrell.com/induction-heating-applications/brazingIn this application video, an Ambrell EASYHEAT LI is used to rapidly braze a brass fitting to a brass tube.
Ambrell Video Corporativo Ambrellinduction 2014-03-18 | Para obtener más información: http://www.ambrell.com/es
