How to Install a Bathroom Vanity, Hook Up the Faucet, and Install the Backsplash (DIY, Step-by-Step) Andrew Thron Improvements 2026-09-24 | How to Install a Bathroom Vanity, Hook Up the Faucet, and Install the Backsplash (DIY, Step-by-Step)
I Ditched the Guest Bedroom and DIYed my Dream Home Office! (But it Still Has a Secret Bed..) Andrew Thron Improvements 2025-08-31 | DIY Home Office Cost Breakdown: atimprovements.com/how-to-build-an-awesome-diy-home-office-step-by-stepI have always wanted to dedicated Home Office. And not just a room with a desk in it...I wanted to have a dedicated space for work with built in cabinets, a nice desk, a place to sit and chill - the whole 9 yards. So in this Video, I am going to show you exactly how to add a Home Office to your Home, step-by-step!I want to give a HUGE thanks to Lowe's for Sponsoring this video and all of the Lowes Products Used are linked in the video and below: - Wall Trim:(I used this type): shoplowes.me/4lzugic- Cabinets: shoplowes.me/46O103n- 3/4" Plywood: shoplowes.me/4mFHFGh- Battery Powered Picture Light: shoplowes.me/45L98Ay- Radial Drywall Sander: shoplowes.me/47nLqvy- Paint (Choose Colors to Suit!): shoplowes.me/412AyiQ- Counter: shoplowes.me/4lqPUoK- Caulk: shoplowes.me/47xiIZ4- Paint Kit (Brush, Roller, etc.): shoplowes.me/45xrtA3- Rug: shoplowes.me/45Ayq3iOther Tools and Materials Used to Build This Home Office: - Interior Define Sleeper Sofa: http://bit.ly/45h7syE- Belldinni Leora Door:doordesignlab.com/leora-vetro-black-matte.html (Use Code "Thron10" for 10% off)Overall, I think that this Home Office turned out great, but there are a few things worth mentioning. As noted in the video title, adding a Home Office to your home won't necessarily raise the value - especially if you have a smaller home (2-3 Bedrooms). Since Home Offices are usually created by converting a bedroom into an office, you can actually reduce your homes value if you convert a two or three bedroom home into a dedicated office - especially if you install built ins, etc. and make it hard to convert back to a bedroom in the future. However, if you have a slightly larger home (4 bedrooms +), than converting one of the bedrooms to a home office could definitely appeal to buyers - especially if the Home Office conversion is done well!Let me know if you have any questions down in the comments!If you like this video, you might like my other videos below: Home Tour of my Fixer-Upper: youtu.be/fGA7UIYnqGM?si=WycRteyoKeTpCNTS DIY Wainscoting / Wall Trim Made Easy! youtu.be/oFBRi8hjT5s?si=9r8ClploCU9Jbw18How to Remodel a Kitchen from Start to Finish: youtu.be/09gZhp_2mboIncredible DIY Curb Appeal Transformation: youtu.be/Dv_AVac44NkFollow me on Instagram: / atimprovements Check out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ https://www.youtube.com/c/AndrewThron...Check out my Website for additional DIY Content: atimprovements.comThanks again for watching and I hope to see you on the next one!Timestamps: 00:00 - Introduction00:16 - Office Lighting03:46 - Built Ins07:51 - Doors, Trim, and Paint12:33 - Custom Standing Desk13:51 - The "Ability to Sleep"*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.#ad #lowespartner
How to Remodel a Kitchen from START to FINISH (A DIY, Step-by-Step Guide That Can Save You $30,000!) Andrew Thron Improvements 2025-08-03 | Learn How to Remodel a Kitchen from Start to Finish with this DIY step-by-Step guide! And if you need any tools to complete your kitchen remodel, check out Ridgid: homedepot.com/b/Tools-Power-Tools/RIDGID/N-5yc1vZc298Z18gBelow are the tools and materials I used to Remodel my Kitchen from Start to Finish:Flooring:Grinding Wheel (to remove mortar): amzn.to/41uhUAqSchluter®-DITRA-HEAT membrane: amzn.to/3YKBk2O Schluter®-DITRA-HEAT Membrane Primer (for plywood subfloor): amzn.to/4mfnKOU Schluter®-DITRA-HEAT heating cables: amzn.to/4mdmvji Thermostat for DITRA-HEAT system: amzn.to/3H63Plm Modified thin-set mortar (ANSI A118.11 for plywood, A118.1 for DITRA): amzn.to/3F04K6p 12"x24" porcelain tiles: allen + roth Earthy Natural Beige 12-in x 24-in Matte PorcelainTile leveling spacers: amzn.to/42UO1KT Grout (sanded or unsanded, depending on joint width): amzn.to/42WeGH9 Grout and Tile Sealer (optional, depending on plywood condition): amzn.to/458lAdP Digital multimeter (to test cable resistance): amzn.to/43f23po Trowels (1/2"x1/2” square notch trowel): amzn.to/4iY0hPl Mixing bucket(s) - Just grab these at your local big box store. Tile Snap Cutter: amzn.to/3F7Nooa Tile Cutting Wheel: https: amzn.to/3GRKAvY Grout float: amzn.to/45avYSm Rubber mallet: amzn.to/4dfr4Wh Cabinets:- Laser Level: amzn.to/4mS75RT- Cabinet Hardware Jig: amzn.to/4mO1FXY- Cabinet Hardware: amzn.to/443l7IW- Countersink Bit: amzn.to/4kU3alE- Bar Clamps: amzn.to/43BXxDa- Drill: amzn.to/43KB0CQ- Brad Nailer: Ridgid 18 Gauge- GRK White Cabinet Screws: amzn.to/3SFXNupWater Filter:Amazon: amzn.to/4mkEFPlWebsite: bit.ly/4l8XlRdAny Kitchen Remodel can really be broken down into 6 main Steps: Step 1: PlanningPlanning your kitchen remodel is likely on one the highest ROI things that you can do to ensure that your project goes well. If you plan out your kitchen thoroughly before you every pull out a hammer, your project will likely go 10x smoother. Step 2: Demolition and Rough-inAfter planning out your kitchen, it's time to demolish the existing kitchen to give yourself a clean slate to work from. Before you can start putting the kitchen back together, you will need to complete the "rough-in" installation for all of your appliances, plumbing fixtures, etc. Depending on the complexity of your kitchen, you MAY want to consider hiring a plumber or electrician for these rough-ins. Step 3: Flooring InstallationPrepare the Subfloor, Install the Uncoupling Membrane, Install the Tiles, and finally, Grout and Seal the TilesStep 4: Cabinet Installation1. Setting the Ledger BoardWhen installing your wall cabinets, it is extremely important that you have a level ledger board to set the cabinets upon. This ledger board is typically a 2"x4" piece of lumber and it is temporarily attached the wall so that it is perfectly level. 2. Finding the "High Point" of the Kitchen FloorTo find the hight point, establish a level line on the wall of the kitchen. Next, measure from the floor to the level line in a few locations in your kitchen. The smallest dimension measured indicates that the floor is the highest in that location. This will be the "high point" in the kitchen and will establish the mounting height for the base cabinets. 3. Using a Cabinet Hardware JigThe last thing you want to do is spend thousands of dollars on cabinets and then botch up the cabinet hardware installation. I highly recommend the use of a $10 cabinet hardware jig to take all of the stress out of measuring. Step 5: Counter InstallationIn my opinion, this step is best left to the professionals. Step 6: Punch ListThis includes things like plugging in appliances, installing crown molding, etc. I sincerely hope that this video is helpful as you try and navigate your own DIY kitchen remodel. I truly hope that you project turns out great. Thank you for watching!Please Follow me on Instagram: @atimprovements Consider Checking out my Blog: Atimprovements.comTimestamps: 00:00 - Introduction01:05 - Planning your Kitchen Remodel03:20 - Existing Kitchen Demolition and Rough-ins04:38 - How to Install Kitchen Tile Floor (Heated!)21:07 - How to Install Kitchen Cabinets39:00 - Kitchen Counters - Everything you NEED to know47:55 - Final Touches / Punch List52:00 - Final Kitchen Result and Cost Guess*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in description may be affiliate links #waterfilter #waterdrop #waterdropfilter #waterpurifier #tanklessro #diy
This Costs $5.98 and Can Make ANY Room Look High-End! Andrew Thron Improvements 2025-07-18 | The claim that $5.98 piece of trim can make any room look "High-End" is a bold one.. but I think it is true! In today’s “Fundamental Friday” I am going to show you the power of wall molding / trim and how it can make any basic wall look custom. And the best part is that this is a super affordable and DIY-friendly project that you can tackle with limited tools and experience! For this project, you are going to need the following tools and materials: Trim Molding (I used this type:lowes.com/pd/11-16-in-x-8-ft-White-Hard-Unfinished-Chair-Rail-Moulding-Actual-0-688-in-x-8-ft/3040323)CA Glue: amzn.to/3GvEEZSMiter Spring Clamps: amzn.to/3IQZzHfMiter Saw or Miter Box: amzn.to/3UhszdQBrad Nailer: amzn.to/3UhsBCuLaser Level: amzn.to/3U7PQixOR Just some brad nails and a hammer. AND if you like Golf and the Beach and you want to Support the Channel, Check out my Product BEACH BIRDIE! beachbirdie.com*Use Code "ATI" for FREE Shipping*To create the wall molding, you will want to create a “box” with mitered edges. For my design, I used a 48” tall by 24” wide box (approximately) for the larger box and a 18” tall by 24” wide smaller box for the bottom. Cut all of the pieces to length using a miter saw (or miter box) and position them in place on a flat surface. Next, use the miter spring clamps to hold the miters together in the perfect position and then apply a bit of CA glue to the mitered joint. Spray some CA glue activator on the miter and it will instantly dry – holding the mitered joint together. Do this for all of the mitered edges and then remove the miter spring clamps. Once the wall molding boxes have been cut and glued together, it is time to hang them on the wall. I like to use a laser level to establish the mounting height on the wall, but you can also just use a standard level. To attach the wall molding boxes to the wall, I like to use a brad nailer with ¾” nails. However, the size of the brad nails will depend on the thickness of the trim you are installing. You can also use a bit of glue on the back of the trim boxes if you want an extra strong hold (However, this will likely tear off the drywall a bit if you ever remove the trim). After getting the first trim box installed, I like to use a piece of blocking as a “spacer” to position the remaining trim boxes. This will help to ensure that everything is level and uniform. Once all of the trim boxes have been installed, use a bit of caulk around the edges of the trim to ensure that there are no visible gaps or openings. Once the calk dries, paint the trim to match the wall. Congratulations! You now have a beautiful custom wall that looks 10x better than a standard boring wall. Let me know if you have any questions down in the comments!If you like this video, you might like my other Wall Trim video that shows you the process of installing DIY Wainscoting! youtu.be/oFBRi8hjT5s?si=9r8ClploCU9Jbw18Follow me on Instagram: / atimprovements Check out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ https://www.youtube.com/c/AndrewThron...Check out my Website for additional DIY Content: atimprovements.com▬▬▬▬▬🛠🧰 TOOLS THAT I USE Carbide Tipped Drill Bit: amzn.to/3S0hdIMTapcon Screws: amzn.to/3OxEWxhDrill: amzn.to/3JICKkkTape Measure: amzn.to/3HaTWgECircular Saw: amzn.to/3BFotC4Masonry Drill: amzn.to/36yP1JWLevel: amzn.to/3HowUDnHammer: amzn.to/35fIpiTChalk Line: amzn.to/3MwSDg8Clamps: amzn.to/3HLqwpKDrill: amzn.to/3JICKkkSawzall: amzn.to/3HcdeSICircular Saw: amzn.to/3BFotC4Jig saw: amzn.to/3I6lcyd▬▬▬▬*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
Watch This BEFORE buying Kitchen Countertops! (Everything You Need to Know) Andrew Thron Improvements 2025-07-06 | Although I hate to say it... you really shouldn't DIY your own kitchen countertops — at least not if you're hoping to increase your home's value.In this video, I'll explain why most DIY-friendly countertop materials (like laminate, wood, or concrete) just don’t cut it when it comes to resale. If you want to actually boost your home’s value, you're probably going to need to invest in one of the following countertop materials: - Marble- Granite- Quartz- Porcelain Composite (like Dekton, which I personally installed in my kitchen)First, I'll go through each countertop material and list the Pros and Cons of Each. Next, I'll explain why I chose Dekton Awake for my kitchen (cosentino.com/usa/colors/dekton/awake) over other options. I am also going to show you every step of the counter installation process. Here is a summary below: 1. Planning Before you can have kitchen counters installed, you need to complete the cabinet installation. Cabinets need to be installed for two reasons. One, it will help you establish the Square Footage of counter needed (for cost planning). Two, the counter installer will need the cabinets in place before they can take measurements. 2. OrderingTo get your counters ordered you are typically going to go into a big box store and make a selection based on what is available. Next, you will set down with a countertop designer and they will prepare a layout drawing and give you a ballpark price. Once you pay the deposit, they will schedule the measurment appaointment. 3. MeasuringSomeone form the Counter fabrication company will go to your home and take measurements using a laser. They will then generate a counter layout drawing for approval. Once you approve the drawing, they will begin fabrication. 4. FabricationAt this stage, the counter fabrication company will cut your slabs based on the measurements taken. Typically, this cutting is done with a large wet saw or a water Jet. 4. InstallationWith the counters fabricated, the installation company will arrive at your kitchen and install the counters in place. This usually takes anywhere from 1-4 hours depending on the complexity of your kitchen. 5. EnjoyCongratulations! Enjoy your new countertops!For more information on Dekton, click here: cosentino.com/dektonThank you all so much for watching this video and supporting my channel – I Really, REALLY Appreciate it!If you liked this video, you might like my previous video in the Kitchen Remodel Series: - How to Install a DIY Heated Kitchen Floor: youtu.be/pOpNDzTG75Q?si=Yx5VFa5UAPBLYx7U- How to Install Kitchen Cabinets from A-Z: youtu.be/BYcrq2OLFwc?si=y13_FnKzF8wqNMjwFollow me on Instagram: / atimprovements Check out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ https://www.youtube.com/c/AndrewThron...Check out my Website for additional DIY Content: atimprovements.com▬▬▬▬▬🛠🧰 TOOLS THAT I USE Carbide Tipped Drill Bit: amzn.to/3S0hdIMTapcon Screws: amzn.to/3OxEWxhDrill: amzn.to/3JICKkkTape Measure: amzn.to/3HaTWgECircular Saw: amzn.to/3BFotC4Masonry Drill: amzn.to/36yP1JWLevel: amzn.to/3HowUDnHammer: amzn.to/35fIpiTChalk Line: amzn.to/3MwSDg8Clamps: amzn.to/3HLqwpKDrill: amzn.to/3JICKkkSawzall: amzn.to/3HcdeSICircular Saw: amzn.to/3BFotC4Jig saw: amzn.to/3I6lcyd▬▬▬▬*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
Ever Wonder How They Get Tires on Wheels? Andrew Thron Improvements 2025-06-09 | I do a lot of things DIY, but putting tires on wheels is definitely not worth it. So here is how the Pros get it done. If you need some tires, check out the Nitto Terra Grappler G3's! bit.ly/4jUSeV1
How to Install Kitchen Cabinets Like a PRO (and Save Thousands!) - DIY Step-by-Step Guide Andrew Thron Improvements 2025-06-08 | If you need Cabinets, Check out ProCraft Cabinetry! dc.procraftcabinetry.com By Installing Kitchen Cabinets yourself, you can save thousands of dollars! This video will show you EVERYTHING that you need to know for a successful DIY Kitchen Cabinet Installation. At a high level, this video is going to cover: - How to Plan and Layout your Kitchen Cabinets- How to Hang wall cabinets - How to Install Base Cabinets - How to Install toe-kicks, filler strips, and cabinet panels- How to Install Cabinet HardwareBelow are the Tools and Hardware Used in this Video: - Laser Level: amzn.to/4mS75RT- 6' Level: amzn.to/3ZNNMze- Cabinet Hardware Jig: amzn.to/4mO1FXY- Cabinet Hardware: amzn.to/443l7IW- Countersink Bit: amzn.to/4kU3alE- Bar Clamps: amzn.to/43BXxDa- Drill: amzn.to/43KB0CQ- Brad Nailer: amzn.to/43Pk5z3- GRK White Cabinet Screws: amzn.to/3SFXNupMore specifically, this video is going to show you exactly how to install kitchen cabinets from A to Z. Here are a few of the information "nuggets" from the video: 1. Setting the Ledger BoardWhen installing your wall cabinets, it is extremely important that you have a level ledger board to set the cabinets upon. This ledger board is typically a 2"x4" piece of lumber and it is temporarily attached the wall so that it is perfectly level. This ledger board will make hanging the upper / wall cabinets 10X easier. 2. Finding the "High Point" of the Kitchen FloorIn order to ensure that your base cabinets are perfectly level across the entire kitchen, you need to start by finding the "high point" of the floor in the kitchen. To find the hight point, establish a level line on the wall of the kitchen. Next, measure from the floor to the level line in a few locations in your kitchen. The smallest dimension measured indicates that the floor is the highest in that location. This will be the "high point" in the kitchen and will establish the mounting height for the base cabinets. All of the other cabinets will be shimmed as needed to raise them to the same level. 3. Using a Cabinet Hardware JigThe last thing you want to do is spend thousands of dollars on cabinets and then botch up the cabinet hardware installation. I highly recommend the use of a $10 cabinet hardware jig to take all of the stress out of measuring. Although installing cabinets is not complicated, there are few crucial steps that are required to ensure that your cabinets are level, plumb, and so that they look like they were installed by a professional. I hope this video helps you to achieve a perfect kitchen cabinet installation!Thank you all so much for watching this video and supporting my channel – I Really, REALLY Appreciate it!If you liked this video, you might like my previous video in the Kitchen Remodel Series: - How to Install a DIY Heated Kitchen Floor: youtu.be/pOpNDzTG75Q?si=Yx5VFa5UAPBLYx7UFollow me on Instagram: / atimprovements Check out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ https://www.youtube.com/c/AndrewThron...Check out my Website for additional DIY Content: atimprovements.com▬▬▬▬▬🛠🧰 TOOLS THAT I USE Carbide Tipped Drill Bit: amzn.to/3S0hdIMTapcon Screws: amzn.to/3OxEWxhDrill: amzn.to/3JICKkkTape Measure: amzn.to/3HaTWgECircular Saw: amzn.to/3BFotC4Masonry Drill: amzn.to/36yP1JWLevel: amzn.to/3HowUDnHammer: amzn.to/35fIpiTChalk Line: amzn.to/3MwSDg8Clamps: amzn.to/3HLqwpKDrill: amzn.to/3JICKkkSawzall: amzn.to/3HcdeSICircular Saw: amzn.to/3BFotC4Jig saw: amzn.to/3I6lcyd▬▬▬▬*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
How to Install a Schluter Ditra Heat Tiled Floor (And Save a TON of Money doing it yourself!) Andrew Thron Improvements 2025-05-16 | Need tires? Check out the Terra Grappler G3's! bit.ly/4jUSeV1For Cost Info, check out my Blog! atimprovements.com/how-to-install-a-schluter-ditra-heat-heated-tile-flooring-system-from-start-to-finish-diyBelow are the tools and materials I used to Installed the Heated Tile Floor in my Kitchen: Schluter®-DITRA-HEAT membrane: amzn.to/3YKBk2O Schluter®-DITRA-HEAT Membrane Primer (for plywood subfloor): amzn.to/4mfnKOU Schluter®-DITRA-HEAT heating cables: amzn.to/4mdmvji Thermostat for DITRA-HEAT system: amzn.to/3H63Plm Modified thin-set mortar (ANSI A118.11 for plywood, A118.1 for DITRA): amzn.to/3F04K6p 12"x24" porcelain tiles: allen + roth Earthy Natural Beige 12-in x 24-in Matte PorcelainTile leveling spacers: amzn.to/42UO1KT Grout (sanded or unsanded, depending on joint width): amzn.to/42WeGH9 Grout and Tile Sealer (optional, depending on plywood condition): amzn.to/458lAdP Digital multimeter (to test cable resistance): amzn.to/43f23po Trowels (1/2"x1/2” square notch trowel): amzn.to/4iY0hPl Utility knife (to cut the membrane): amzn.to/4klaZRb Mixing bucket(s) - Just grab these at your local big box store. Drill with Mixer: amzn.to/43fMRsqTile Snap Cutter: amzn.to/3F7Nooa Angle Grinder and Tile Cutting Wheel: amzn.to/3GMPoTo & amzn.to/3GRKAvY Grout float: amzn.to/45avYSm Rubber mallet: amzn.to/4dfr4Wh This is Episode 1 in my "Dream Kitchen Remodel" Series and in this video, I am going to be installing the Kitchen Tile Flooring. But this is not just any tile floor. I am going to be installing the Schluter Ditra Heat flooring system which is going to add a touch of comfort and luxury to this job. Now heated floors like this are typically used in bathrooms. However, my home has a heat pump (not super efficient) and the temperatures drop into the teens in the winter. So I mainly installed this heated flooring system to help heat the main area of my home in the winter. Hopefully, that makes sense. To Install a Ditra Heat Tile Flooring System, you will want to follow these general steps: Step 1: Prepare the SubfloorIn my kitchen, I had a plywood subfloor that had some thinset mortar stuck to it from the previous kitchen tile removal. Be sure to remove all, mortar, dirt, dust, etc. from your subfloor. Apply a primer (if applicable) for your subfloor for optimal adhesion. Step 2: Install the Uncoupling MembraneSchluter makes a bunch of different uncoupling membrane types, but I went with the Peel and Stick Sheets (since that seemed to be the easiest to install). Simply peel off the plastic and then press the adhesive backing into the subfloor. Step 3: Ditra Heat Electrical and Cable Installation. I had the electrical work for my heated flooring system installed by a licensed electrician. Essentially, you will want a dedicated circuit run from your electrical panel to your thermostat location. Additionally, you will want to run a conduit from the thermostat box to the base of the floor so that you can run the heating cables and temperture sensor wires up to the thermostat from the floor. To install the heating cable, simply press it within the "knobs" in the membrane being sure to follow the manufacturer's instructions for grid spacing, etc. Lastly, install the temperature sensors within the grid. Step 4: Install the TilesWith the heating cables installed, mix up your thinset mortar and apply it to the membrane with a trowel. I used 12"x24" tile for my kitchen, so I used a 1/2" square notch trowel. Apply the trowel lines perpendicular to the tiles longest side and then press the tile into the mortar. Don't forget to "back-butter" the back of the tile. Install spacers, leveling clips, etc. as needed. Cut the tiles using an angle grinder or a tile saw / snap cutter.Step 5: Grout and Seal the TilesAfter the tiles have been installed apply grout to the gaps and seal the grout to prevent staining in the future. Step 6: Test the System and EnjoyFinally, adjust the floor temperature on the thermostat and test everything out. Overall, a heated tile kitchen floor is an awesome luxury feature that be a huge upgrade for any home!Schluter Resources: Installing Schluter®-DITRA-HEAT-PS/-DUO-PS Peel and Stick Membrane: youtube.com/watch?v=22gUUs0x60M&t=2sInstalling Schluter®-PRIMER-PS: Primer for Peel and Stick Membranes: youtube.com/watch?v=_5YwOwAAZi0Follow me on Instagram: instagram.com/atimprovementsCheck out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ youtube.com/c/AndrewThronImprovements?sub_confirmation=1*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
Unbelievable DIY Home Exterior Transformation (3 Year renovation in 25 minutes) Andrew Thron Improvements 2025-04-27 | Support the Channel by grabbing one of the first 100 BeachBirdie's! beachbirdie.com/. Use Code “ATI” for Free Shipping! (First 3 orders get tool belt - next 10 get hat)A few years ago, I bought one of the ugliest homes in my neighborhood with grand ambitions to fix it up and turn it in to my “Dream” Starter-home. Over the course of a few years, I poured a ton of sweat equity into this home and, thankfully, my brother was around to help me with many of the projects. This video will show you exactly how we completely transformed the exterior of this home by tackling a bunch of projects that can roughly be broken up into the following categories: Backyard Transformation - youtu.be/AUujzcGkN-Q?si=pWuWu3kY-MODNi7tFront Yard Transformation - youtu.be/Dv_AVac44Nk?si=rtqvSMfN6AwchN2JModern Shed Construction - youtu.be/0rua7eJ_LVs?si=GWjTFPKlJa1wtyk7Porch Addition - youtu.be/htVscyvaDDc?si=kI1XMCv46Sbd3V__By completing all of these project, we completely transformed both the backyard and the curb appeal of this home – adding ~250k of equity in the Process! (But I also probably spent at least 75k on tools materials over the course of 3 years...)Below is a quick recap on all of the projects: Backyard: In the backyard, we started by demolishing pretty much everything (The deck, the fence, the shed, etc.). Next, we did some structural work for the deck (e.g. extending the concrete slab landing) and built the shed using pressure treated lumber and Trex decking. I decided to install a wire railing on the deck which I think turned out great. We also built a new fence, a privacy screen, and added an outdoor projector screen adjacent to the deck for some outdoor movies. Below are all of my DETAILED videos on the Backyard Projects: How to Build a Fence: youtu.be/Nst-QWq5Cuc?si=D-RMJH8_fbApxBLAHow to Build a Privacy Screen: youtu.be/sq9FEi7g3hk?si=sQDRSox55oS_AsrqConcrete Slab Extension – Lessons Learned: youtu.be/URTGmSfBxeg?si=uQ1S0GWQaFoBbHuJHow to Build a Fence Gate: youtu.be/ogQ4TG3bYB0?si=3hedR4oFX1d8cuQVFront Yard Transformation: When I bought the House, the curb appeal was a joke. To fix this, we started by upgrading the “stoop” with new railings and an extending concrete landing. Next, we built a new curved concrete sidewalk leading up to the house and added a DIY Concrete Garden curb to separate the garden from the Lawn. Below are all of my DETAILED videos on the Front Yard Projects: How to Resurface Concrete: youtu.be/48qNxTz8iKc?si=Zr2HfsTc_00uATHwHow to Install a Metal Cable Railing: youtu.be/IVz9cW0GgJg?si=kLmKvW83p867hkuBHow to Pour a new Concrete Sidewalk: youtu.be/EJGxT4gNyZU?si=ABivQthkcXnIGZCOHow to Build a Concrete Garden Curb: youtu.be/tcl2k9TkT-w?si=w8GNFke6oD7bbuK5Modern Shed: The Modern Shed build was definitely a passion project and something that I wanted to build for fun. I think it turned out awesome and I have detailed videos on every step of the modern shed building process. How to Build a Modern Shed From Start to Finish: youtu.be/0rua7eJ_LVs?si=PdIEWcoYeiyFLnNBPorch Addition: The gable porch addition was the final step in completely transforming the overall look and curb appeal of my home. Although this project was a bit intimidating, it was 100% worth it. Here are the videos that Show you exactly how I built it (ebook is linked in these videos).How to Build a Gable Porch Addition: youtu.be/htVscyvaDDc?si=p01Jvpph026fiL-tHow to Wrap Posts with Decorative Faux Stone: youtu.be/XS6lhHgp4_M?si=RojkOmpdKY69C87sOverall, I leaned a TON renovating this home and even though it was a ton of work, I wouldn’t change for the world. Although it cost a lot of time and money, it is now an asset in my portfolio that I am super proud of!Thank you all so much for watching this video and supporting my channel – I Really, REALLY Appreciate it!Follow me on Instagram: / atimprovements Check out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ https://www.youtube.com/c/AndrewThron...Check out my Website for additional DIY Content: atimprovements.com▬▬▬▬▬🛠🧰 TOOLS THAT I USE Carbide Tipped Drill Bit: amzn.to/3S0hdIMTapcon Screws: amzn.to/3OxEWxhDrill: amzn.to/3JICKkkTape Measure: amzn.to/3HaTWgECircular Saw: amzn.to/3BFotC4Masonry Drill: amzn.to/36yP1JWLevel: amzn.to/3HowUDnHammer: amzn.to/35fIpiTChalk Line: amzn.to/3MwSDg8Clamps: amzn.to/3HLqwpKDrill: amzn.to/3JICKkkSawzall: amzn.to/3HcdeSICircular Saw: amzn.to/3BFotC4Jig saw: amzn.to/3I6lcyd▬▬▬▬*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
How to Build a Shed Foundation on a Slope Andrew Thron Improvements 2025-04-16 | Here are my Tips for Building a Shed Foundation on a Slope:1. Layout the Shed Foundation using string lines and battter boards2. Wear a good pair of boots. I rocked the Danner Bull Run GTX's for this Build. (danner.pxf.io/c/2903430/2158543/27565)3. Excavate as needed around the perimeter of the foundation and backfill with 2"-4" of stone. 4. Build the Shed Foundation frame with 4"x6" pressure treated lumber. 5. Backfill the "void" space with dirt (first) and stone (second). 6. Compact everything. If you want a detailed video explaining the process, check out my video linked here: youtu.be/wXbrFrXqmrg?si=aneFzxa8jbk2B7E0Those are my Tips! Be sure to subscribe if you want to see how I rebuild this deck and Check out the Danner Bull Run GTX Boots Here: danner.pxf.io/c/2903430/2158543/27565#diy #danner #shed #foundation
Do NOT install one of these if you Consider yourself Handy… Andrew Thron Improvements 2025-04-07 | Learn how to install an actual hard wired light instead of a gimmicky battery powerd light that you will never use. Also, the drywall ninja tip is a game changer if you don't want to repair any drywall.
The Foolproof Shed Foundation! (Works on Flat or Sloped Terrain) - DIY Step-by-Step Guide Andrew Thron Improvements 2025-03-21 | Go to http://DrinkLMNT.com/thron for a free sample pack with any purchase!For a Cost Breakdown for this Shed Foundation, check out my Blog: How to Build a Shed Foundation on a Slope - A DIY, Step-by-Step Guide - AT ImprovementsIn this video, you will learn how to build a foolproof shed foundation! This shed foundation design involves gravel and pressure treated lumber - so you don’t need to worry about concrete. The best part? You can use this type of shed foundation on both flat and sloped terrain. Here is how to Build it:1. Plan and Layout Your Shed FoundationStep one in building a shed foundation is to plan out the location and size of your shed. The general rule of thumb is that you want your shed foundation to be a foot or two larger than your shed. For example, if you are building a 10’x10’ shed, aim for a 12’x12’ shed foundation.I recommend the use of batter boards and string lines to layout the shed foundation, but there are a bunch of different ways to do this. At the end of the day, you just want to ensure that your shed layout is perfectly square.2. Clear the Area and Apply StoneAfter laying out the shed foundation footprint, I recommend that you remove any grass, vegetation, etc. for a 12” “strip” around the perimeter of the shed. Next, you will want to level the soil and compact it using a hand tamp. Once the soil is level and compacted, apply around 2” of stone on top of the soil. The stone will allow for better drainage under the shed foundation and will also make it easier to level. Compact the stone and ensure that it is level.3. Build the Shed Foundation FrameOnce the site is prepped, use 4”x6” pressure treated lumber to frame the shed foundation. Since my shed foundation is 12’x12’, I cut my 4”x6” pressure treated lumber to a length of 12’ and positioned it in place at the back of the shed. After confirming that it was level, I pre-drilled 5/8” (amzn.to/4kCws9n) holes through the lumber every 3’ and then I drove a piece of ½” rebar through the board and into the ground. This rebar should go around 2’-3’ into the ground and it will help to hold the lumber in place.Once the back piece of lumber is installed, begin installing the lumber on the sides of the shed. Note that you will need to “step-up” the lumber to account for the slope of the terrain. Be sure to secure the sides and front of the shed foundation frame lumber together using rebar and 10” structural screws. Continue to install the lumber as required to get the shed frame perfectly level on each side.4. Backfill the Shed Foundation Area with DirtOnce the shed foundation frame is constructed, backfill the “void space” within the shed frame with dirt. Fill the frame with dirt until you have 2”-4” between the top of the dirt and the top of the shed foundation frame. That space will be filled with stone in a later step. I recently got a Liberty 7K Dump Trailer and it has been a game changer for projects like this: libertytrailers.com/ld7k-dump-trailers5. Install Landscape FabricAfter backfilling the shed foundation area with dirt, apply landscape fabric (amzn.to/4kCwNZH) over the shed foundation. This landscape fabric will help to prevent weeds from growing up through your shed foundation and will also prevent the stone (applied next) from sinking down into the dirt.6. Install the final layer of StoneOnce the landscape Fabric is installed, fill the final 2”-4” of the shed foundation frame with #57 stone (or similar). This final layer of stone will help with compaction and also allow for proper drainage beneath the shed. Once the stone has been applied, leveled, and compacted, the Shed Foundation is complete.You can now Build your Shed!Since this shed foundation project was a lot of manual labor, I decided to install a premade resin shed. However, on my last house, I build a pretty sweet (in my opinion) Modern Shed. If you want to check out the Modern Shed, I have free framing plans and an instruction video showing every step of the project which are linked here:youtube.com/playlist?list=PL68K7BI-1QBrhOEHnMrYS1Nz_6fa5V5fT&si=LDi9WKjUvdhvKIv5Follow me on Instagram: instagram.com/atimprovementsCheck out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ youtube.com/c/AndrewThronImprovements?sub_confirmation=1▬🛠🧰 TOOLS THAT I USE Drill: amzn.to/3JICKkkTape Measure: amzn.to/3HaTWgECircular Saw: amzn.to/3BFotC4Level: amzn.to/3HowUDnHammer: amzn.to/35fIpiTChalk Line: amzn.to/3MwSDg8Drill: amzn.to/3JICKkkSawzall: amzn.to/3HcdeSICircular Saw: amzn.to/3BFotC4▬Thank you so much for watching!*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
Watch This Before Remodeling Your Half-Bathroom! (DIY Half Bath Remodel + Design Inspiration) Andrew Thron Improvements 2025-02-16 | Half Bath Remodelers - Use Surfshark Code: surfshark.com/andrewthron for an exclusive deal of 4 extra months!Link to Tools and Materials Used in the Video: Horow T37 Smart Toilet (Use code ANDREWTHRON" or this link for 15% off: horow.com/discount/ANDREWTHRON?ref=qetuaqtc.Belldinni Leora Door:doordesignlab.com/leora-vetro-black-matte.html (Use Code "Thron10" for 10% off)Toilet Crystals: amzn.to/4hzbeXPVanity: wayfair.com/home-improvement/pdp/ebern-designs-egremt-36-single-bathroom-vanity-with-engineered-stone-top-sgrv1513.html?piid=97008206Rug: amzn.to/3CZ9isuVanity Light: amzn.to/4icaKqLLED Mirror: wayfair.com/decor-pillows/pdp/wade-logan-budworth-arch-led-wall-mirror-bathroom-mirror-w110470079.html?piid=1099028640Modern Baseboard / Casing: 23/32 X 5-1/2 X 16 FT PFJ SIMPLY MODERN BASEBOARD - Next Day Moulding Doors & Stairs 23/32 X 3-1/2 X 16 FT PFJ SIMPLY MODERN CASING - Next Day Moulding Doors & StairsNow when I say that a half-bathroom remodle is the gateway Dr*g of home improvement, here is what I mean...On the surface, a half bath remodel is pretty simple. Typically, it's just a toilet, vanity, and maybe a light that needs to be replaced..However, DIY projects are rarely as simple as the seem. 9 times out of 10, there will be setbacks and problems that you need to solve that invole numerous trips to the hardware store and sometimes a few additional tools. BUT if you commit to finishing a half bath remodel and you learn along the way, you will 100% gain a bunch of skills and will likely find yourself itching for your next project!A half bath remodel was the very first project that I ever tackled. Fast forward a few years, and I have taught myself how to remodel basically anything! And it all started with that first project.Let me know what you think of the final result and thanks so much for watching!Follow me on Instagram: instagram.com/atimprovementsCheck out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ youtube.com/c/AndrewThronImprovements?sub_confirmation=1Check out my Website for additional DIY Content: atimprovements.com▬▬▬▬▬▬▬▬▬▬▬▬▬🎥 MY YOUTUBE GEAR Camera (Iphone Max): amzn.to/3d5HxSoMicrophone (Maono Condenser Mic): amzn.to/3RCAb7NTripod: amzn.to/3Rz5Gj3Mini Tripod: amzn.to/3Rvt2WMLighting: amzn.to/3d4QdZ5▬▬▬▬▬▬▬▬▬▬▬▬▬🛠🧰 TOOLS THAT I USE Carbide Tipped Drill Bit: amzn.to/3S0hdIMTapcon Screws: amzn.to/3OxEWxhDrill: amzn.to/3JICKkkTape Measure: amzn.to/3HaTWgECircular Saw: amzn.to/3BFotC4Masonry Drill: amzn.to/36yP1JWLevel: amzn.to/3HowUDnHammer: amzn.to/35fIpiTChalk Line: amzn.to/3MwSDg8Clamps: amzn.to/3HLqwpKDrill: amzn.to/3JICKkkSawzall: amzn.to/3HcdeSICircular Saw: amzn.to/3BFotC4Jig saw: amzn.to/3I6lcyd▬▬▬▬▬▬▬▬▬▬▬▬▬Thank you so much for watching!*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.#home #smarttoilet #renovation #building #house #bathroomdesign #bathroommakeover #toilet#bathroomrenovation #bathroomremodel #Bathroom
Painting Contractors Hate Me For Showing You This! Andrew Thron Improvements 2025-01-19 | Check out My Blog for Cost Breakdown, More Info, etc. atimprovements.com/how-to-apply-roman-clayTools and Materials Used for this Roman Clay Project: Roman Clay (Le Catedral Color): portolapaints.com/collections/roman-clay/products/la-catedral-roman-clayPutty Knife: amzn.to/4hnU1QvPainter's Tape: amzn.to/4hlfObFDry Dex Spackle: amzn.to/4g29CUXRoman Clay is one of the hottest new interior design trends because, unlike paint, it can give your walls a high-end and natural feel while also giving the walls a smooth and unique texture. After seeing various examples of Roman Clay, I was Intrigued.... and I decided to apply it to this accent wall in my home. This video is going to show you how to apply Roman Clay to any wall, step-by-step. But there are a few things that should be noted now:1. Because Roman Clay is applied with a putty knife or a trowel, this technique can seem a bit intimidating to some. However, I promise you that the application is easier than you think and you don't need to pay a painting contractor an arm and a leg to apply it for you. 2. Roman clay is a bit more expensive and time consuming than simply painting your wall. If you are on a budget (from a TIME or MONEY perspecitive), than Roman Clay might not be for you. 3. I don't think that this applicaiton area did this project justice. Overall, I think that Roman Clay looks best when it is applied to a large area - not a small accent area like this. Therfore, I also applied Roman Clay to a half bathroom that I am remodeling and I will show that to you all in next week's video!Thanks so much for watching and I hope to see you next week!Follow me on Instagram: instagram.com/atimprovementsCheck out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ youtube.com/c/AndrewThronImprovements?sub_confirmation=1Check out my Website for additional DIY Content: atimprovements.com▬▬▬▬▬▬▬▬▬▬▬▬▬🎥 MY YOUTUBE GEAR Camera (Iphone Max): amzn.to/3d5HxSoMicrophone (Maono Condenser Mic): amzn.to/3RCAb7NTripod: amzn.to/3Rz5Gj3Mini Tripod: amzn.to/3Rvt2WMLighting: amzn.to/3d4QdZ5▬▬▬▬▬▬▬▬▬▬▬▬▬🛠🧰 TOOLS THAT I USE Carbide Tipped Drill Bit: amzn.to/3S0hdIMTapcon Screws: amzn.to/3OxEWxhDrill: amzn.to/3JICKkkTape Measure: amzn.to/3HaTWgECircular Saw: amzn.to/3BFotC4Masonry Drill: amzn.to/36yP1JWLevel: amzn.to/3HowUDnHammer: amzn.to/35fIpiTChalk Line: amzn.to/3MwSDg8Clamps: amzn.to/3HLqwpKDrill: amzn.to/3JICKkkSawzall: amzn.to/3HcdeSICircular Saw: amzn.to/3BFotC4Jig saw: amzn.to/3I6lcyd▬▬▬▬▬▬▬▬▬▬▬▬▬Thank you so much for watching!*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
How to Demolish a Deck (Tips you NEED to Know so that you dont Waste Time) Andrew Thron Improvements 2024-12-23 | Here are my Tips for Demolishing a Deck: 1. Rent a Dumpster2. Wear the Right Safety Equipment (I wore the @Danner1932 Bull Run GTX boots and eye / ear protection)3. Start by removing the skirting boards4. Remove the Railings in manageable Sections5. Cut the decking boards into smaller pieces before prying them up with a deck demo tool. Those are my Tips! Be sure to subscribe if you want to see how I rebuild this deck and Check out the Danner Bull Run GTX Boots Here: danner.pxf.io/c/2903430/2158543/27565#diy #danner #demolition #deck #demoday
I Bought my Next Fixer-Upper Property (And Its a Weird One)! - Full Home Tour Andrew Thron Improvements 2024-12-22 | Welcome to my next Fixer-Upper Project!This one should be interesting....I'll be honest, I am a little bit intimidated by this house.. It's nearly 3x the size of my last fixer upper project and A LOT more expensive... But with that said, I am also really excited about this project!I have so many ideas to try and make this propety awesome. The hard part is trying to decide where to begin...But before I get into this renovation, I would really appreciate any and all feedback that I can get from you all! From the comments I have received over the years, I know for a fact that some of you really know your stuff and I know that you can offer some great insights into how I can make this property look its best. Let me hear your thoughts!As for project timeline, I think the these projects will be the next few videos featured on the channel. - How to renovate a Kitchen (I am super excited for this video since I didn't document the kitchen renovation on my last house)- How to Build a Deck from Start to Finish- How to remodel a half-bathroom- How to Build a Deck on a slope. - And many, many more. 2025 is going to be busy, that is for sure...I want to thank each and every one of you for supporting the channel as I renovated my last fixer-upper - and I hope to be able to provide you with more value and ideas with this house!I really look forward to having you all along for the journey and I can't wait to start the renovation and show you all the progress. Thanks so much for wathcing and I wish you all an outstanding start to 2025!If you are new to the channel, Welcome! Here are some of my favorite videos from my last fixer-upper property and I think you migth like them: Basement Renovation: youtu.be/ORHmGqvk6_o?si=SYzbtz2ZWhCp6_YO1/2 Bath to Full Bath Conversion:youtu.be/-MsdKLJrAS8?si=wdsZ19Ade0hXviQF Basement Bathroom Renovation: youtu.be/U7Sdrm6Ongc?si=19auHaSthwh7vf3rBackyard Transformation: youtu.be/AUujzcGkN-Q?si=mpoIKtff7gXFtED9Curb Appeal Transformation: youtu.be/Dv_AVac44Nk?si=WtV-7dYQ6ZCblkOJHow to Build a Modern Shed: youtu.be/0rua7eJ_LVs?si=scOHh6_EXiEf9E3IHere is each Chapter of the Video: 00:00:00 - Introduction00:00:13 - First Floor Tour (Kitchen, Living Room, etc.)00:03:29 - Second Floor Tour (Bedrooms, bathrooms, etc.)00:06:05 - Basement Tour00:07:16 - Outside Tour (Front yard, Back yard, Curb Appeal etc.)00:09:20 - ConclusionFollow me on Instagram: instagram.com/atimprovementsCheck out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ youtube.com/c/AndrewThronImprovements?sub_confirmation=1Check out my Website for additional DIY Content: atimprovements.com▬▬▬▬▬▬▬▬▬▬▬▬▬🎥 MY YOUTUBE GEAR Camera (Iphone Max): amzn.to/3d5HxSoMicrophone (Maono Condenser Mic): amzn.to/3RCAb7NTripod: amzn.to/3Rz5Gj3Mini Tripod: amzn.to/3Rvt2WMLighting: amzn.to/3d4QdZ5▬▬▬▬▬▬▬▬▬▬▬▬▬🛠🧰 TOOLS THAT I USE Carbide Tipped Drill Bit: amzn.to/3S0hdIMTapcon Screws: amzn.to/3OxEWxhDrill: amzn.to/3JICKkkTape Measure: amzn.to/3HaTWgECircular Saw: amzn.to/3BFotC4Masonry Drill: amzn.to/36yP1JWLevel: amzn.to/3HowUDnHammer: amzn.to/35fIpiTChalk Line: amzn.to/3MwSDg8Clamps: amzn.to/3HLqwpKDrill: amzn.to/3JICKkkSawzall: amzn.to/3HcdeSICircular Saw: amzn.to/3BFotC4Jig saw: amzn.to/3I6lcyd▬▬▬▬▬▬▬▬▬▬▬▬▬Thank you so much for watching!*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
I Bought a Run-Down Crack House and Tried to Remodel it Myself (no prior experience): Full Home Tour Andrew Thron Improvements 2024-12-15 | A few years ago, I bought this fixer-upper property with no prior renovation or construction experience. I just figured, "how hard can it be?" The Answer: HARD! But after a few years of trial and error (and a whole lot of YouTube University), I finally completed the renovation of this home....about dang time. Although I did 95% of the work myself, I definitley had help from friends and family along the way. If you are reading this and you helped me with the house in any way - THANK YOU!During the Process of this renovation, I started documenting the DIY Projects on YouTube. Although it started slow, my channel finally got some traction when my "Half bath to Full Bath Transformation video" went semi-viral (youtu.be/-MsdKLJrAS8?si=wdsZ19Ade0hXviQF). Ever since that video, I have done my best to try and document every project that I tackle so that my videos can potentially help someone else in the future. I learned everything that I know about DIY and renoavtion from YouTube and I hope that I can help others to learn the same skills that I learned from the YouTube community. For all of you who have been watching and supporting my channel over the years: THANK YOU SO, SO MUCH. None of this would be possible without your support and I am extremely grateful!If you want to learn how to tackle any of the projects shown in this video, check out my channel for detailed videos: youtube.com/@UC8v_4LkljBkasuTNSbgdCFw However, here are a few videos in particular that I think you might enjoy: 1/2 Bath to Full Bath Conversion:youtu.be/-MsdKLJrAS8?si=wdsZ19Ade0hXviQF Basement Renovation: youtu.be/ORHmGqvk6_o?si=SYzbtz2ZWhCp6_YOBasement Bathroom Renovation: youtu.be/U7Sdrm6Ongc?si=19auHaSthwh7vf3rBackyard Transformation: youtu.be/AUujzcGkN-Q?si=mpoIKtff7gXFtED9Curb Appeal Transformation: youtu.be/Dv_AVac44Nk?si=WtV-7dYQ6ZCblkOJHow to Build a Modern Shed: youtu.be/0rua7eJ_LVs?si=scOHh6_EXiEf9E3INow let's talk about the NEW HOME. I am so excited to show you all the new fixer-upper property in next week's video! This is an exciting new property with a lot of potential - but it is definitely not for everyone. Can't wait to get your feedback!Follow me on Instagram: instagram.com/atimprovementsCheck out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ youtube.com/c/AndrewThronImprovements?sub_confirmation=1Check out my Website for additional DIY Content: atimprovements.com▬▬▬▬▬▬▬▬▬▬▬▬▬🎥 MY YOUTUBE GEAR Camera (Iphone Max): amzn.to/3d5HxSoMicrophone (Maono Condenser Mic): amzn.to/3RCAb7NTripod: amzn.to/3Rz5Gj3Mini Tripod: amzn.to/3Rvt2WMLighting: amzn.to/3d4QdZ5▬▬▬▬▬▬▬▬▬▬▬▬▬🛠🧰 TOOLS THAT I USE Carbide Tipped Drill Bit: amzn.to/3S0hdIMTapcon Screws: amzn.to/3OxEWxhDrill: amzn.to/3JICKkkTape Measure: amzn.to/3HaTWgECircular Saw: amzn.to/3BFotC4Masonry Drill: amzn.to/36yP1JWLevel: amzn.to/3HowUDnHammer: amzn.to/35fIpiTChalk Line: amzn.to/3MwSDg8Clamps: amzn.to/3HLqwpKDrill: amzn.to/3JICKkkSawzall: amzn.to/3HcdeSICircular Saw: amzn.to/3BFotC4Jig saw: amzn.to/3I6lcyd▬▬▬▬▬▬▬▬▬▬▬▬▬Thank you so much for watching!*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
Super Simple DIY Fire Wood Storage Shed (FREE Plans!) Andrew Thron Improvements 2024-11-24 | FREE Plans and Cost Breakdown: atimprovements.com/how-to-build-a-diy-fire-wood-rack-free-plansDanner Bull Run GTX Boots: danner.com/work/bull-run/bull-run-moc-toe-6-brown-gtx.htmlToday, I'm going to show you how to build a DIY Fire Wood Rack from Start to Finish! If you have every tried to start a fire with wet logs, you know how annoying it is. Fortunately, this Fire Wood Rack is going to help keep my lumber dry from now on. Building this Fire Wood Rack is Super Simple! As noted in the video, I put together a detailed materials list, cut list, and cost breakdown at the link above so check that out if you want specifics. Below are the generic assembly instructions: Step 1: Purcahse the Lumber and Materials based on the Materials list in the FREE Plans. Step 2: Cut all of the Lumber to size based on the cut list provided in the plans. Step 3: Construct the Fire Wood Rack Base using 2"x6" and 1"x6" Lumber. Step 4: Attach the veritical support braces to the base. Step 5: Assemble the roof frame and Attach it to the vertical support braces. Step 6: Cut the corrugated metal roof to size using an angle grinder and attach the metal to the roof frame using gasketed screws. Step 7: Stain or Paint the Fire Wood Rack as desired and enjoy dry wood from here on out!In my opionion, you can builid this Fire Wood Rack in an afternoon by yourself and probably in one hour if you have a helping hand. I hope this video and my FREE plans are helpful and good lukc building. About today's Video Sponsor - DANNER 🥾Danner has been crafting high quality boots since 1932. Their commitment to quality is stitched into every boot, evident in their time-tested Bull Run family. The Bull Run GTX is the latest iteration, adding a waterproof liner to the iconic work boot. I love that Danner Boots are made in the USA and I'm excited to have some high qaulity work boots for my upcoming projects. For more info Danner and the Bull Run boots, check out the links below: Danner Bull Run GTX: danner.com/work/bull-run/bull-run-moc-toe-6-brown-gtx.htmlBull Run GTX (Steel Toe): danner.com/work/bull-run/bull-run-moc-toe-6-brown-gtx-st.htmlBull Run Family: danner.com/work/bull-run?sortId=product-family&stock_status%5B%5D=1&stock_status%5B%5D=0Learn more about Danner Recrafting: danner.com/quality-stories/recrafting-storyFollow me on Instagram: instagram.com/atimprovementsCheck out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ youtube.com/c/AndrewThronImprovements?sub_confirmation=1▬🎥 MY YOUTUBE GEAR Camera (Iphone Max): amzn.to/3d5HxSoMicrophone (Maono Condenser Mic): amzn.to/3RCAb7NTripod: amzn.to/3Rz5Gj3Mini Tripod: amzn.to/3Rvt2WMLighting: amzn.to/3d4QdZ5▬🛠🧰 TOOLS I USE Drill: amzn.to/3JICKkkTape Measure: amzn.to/3HaTWgECircular Saw: amzn.to/3BFotC4Level: amzn.to/3HowUDnHammer: amzn.to/35fIpiTChalk Line: amzn.to/3MwSDg8Clamps: amzn.to/3HLqwpKDrill: amzn.to/3JICKkkSawzall: amzn.to/3HcdeSICircular Saw: amzn.to/3BFotC4Bar Clamps: amzn.to/3JjFrJe*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
Lattice SUCKS - Build this DIY Privacy Screen Instead Andrew Thron Improvements 2024-11-10 | Cost Breakdown: atimprovements.com/dont-use-lattice-build-this-diy-privacy-screen-insteadI cannot stand the look of lattice. Is that a little dramatic? 100%. But I really do think it looks tacky. So in this video, I am going to show you to build a simple DIY Privacy Screen that looks so much better than lattice (at least in my opinion). To build this privacy screen, you are going to need the following tools and materials: - Drill: amzn.to/48KH7Jf- 1.5" exterior rated screws: amzn.to/3O3nlza- Saw (Miter or Circular)- 1"x6" pressure treated boards- 2"x4" presssure treated lumber To build this DIY privacy screen, start by cutting the horizontal privacy slats (1"x6" lumber) to the length of the area that you are trying to conceal. Next, measure the height of the screen and cut a few vertical support braces (2"x4") that you will mount the horizontal privacy slats to. Next, simply attach the horizontal privacy slats to the vertical support braces. It really is that simple. For additional information on building this privacy screen (included a cost comparison between this screen and lattice) check out my blog article linked here: atimprovements.com/dont-use-lattice-build-this-diy-privacy-screen-insteadAnd as promised in the video, the link to my "How to Build a Ground Level Deck" video is here: youtu.be/id641w6UomA?si=YKgzTE4ecu5Fzv4cFollow me on Instagram: instagram.com/atimprovementsCheck out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ youtube.com/c/AndrewThronImprovements?sub_confirmation=1▬🎥 MY YOUTUBE GEAR Camera (Iphone Max): amzn.to/3d5HxSoMicrophone (Maono Condenser Mic): amzn.to/3RCAb7NTripod: amzn.to/3Rz5Gj3Mini Tripod: amzn.to/3Rvt2WMLighting: amzn.to/3d4QdZ5▬🛠🧰 TOOLS I USE Drill: amzn.to/3JICKkkTape Measure: amzn.to/3HaTWgECircular Saw: amzn.to/3BFotC4Level: amzn.to/3HowUDnHammer: amzn.to/35fIpiTChalk Line: amzn.to/3MwSDg8Clamps: amzn.to/3HLqwpKDrill: amzn.to/3JICKkkSawzall: amzn.to/3HcdeSICircular Saw: amzn.to/3BFotC4Bar Clamps: amzn.to/3JjFrJe*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
Planned Projects VS Emergency Repairs Andrew Thron Improvements 2024-10-30 | Check out HomeServe USA! bit.ly/3C1prx1Don’t get me wrong… I love doing DIY projects when I come up with the concept, plan everything out, and then build it. In fact, planning out my “backyard oasis” project hasbeen a really fun process (and I can’t wait to show y’all!)Emergency DIY projects (plumbing leaks, HVAC repairs, etc.) on the other hand, are some of the most annoying tasks ever… especially if you need to go into a dark scary basement to repair them. So when @homeserve_usa reached out to me and asked if I could be an ambassador or coverage plans from them. I thought it could be a good fit for those of you who want to focus on the fun DIY projects and leave some of the emergency repairs to others.Having no heat or AC can be inconvenient and stressful — and could wind up costing you big bucks to repair or replace your home systems! Choosing the right plan from HomeServe for your household can help you avoid paying out of pocket for your next covered repair up to the plan’s benefit amount.For more info on HomeServe, Check out the link in my bio!And FOLLOW to see these future projects!#ad #HomeServe #DIY #howto #3DModeling #homerepairtips I am a spokesperson for HomeServe. Plans subject to limitations; see HomeServe.com.
Easiest Deck That You Can Build by Yourself (No Permits, No Railing, & No Nonsense) - One Weekend Andrew Thron Improvements 2024-10-27 | 🧰 TOOLS & Materials Used For This Project🛠Bison Level Up Deck System: amzn.to/4fnnusPCost Breakdown: atimprovements.com/easiest-way-to-build-a-ground-level-deck-bison-level-up-adjustable-pedestal-system-step-by-step-guideTorpedo Level: amzn.to/4flBO5p6' Level: amzn.to/3BV6tImHidden Fasteners:amzn.to/4hnqaJ8Deck Leverage Tool: amzn.to/4eUjYGLAWP Tool Belt: amzn.to/4fixQu7Bar Clamps: amzn.to/3JjFrJeThis past weekend I built this 14'x14' Ground Level "Floating Deck" using the Bison Level Up Adjustable Deck Pedestal System and I am pretty dang happy with how it turned out. Here is how to Build a floating Deck (tools and materials linked at the end): : 1. Site PreparationFirst, mark the layout for you deck usign some stakes and a string line. After marking the layout, I recommend that you excavate down 1 or 2 inches and apply a gravel based to facilitate compaction. However, you can also build your ground level deck on compacted soil, an existing patio or slab, etc. I rented both mini skidsteer and a plate compactor for this proeject to save myself some manual labor. After excavating, compact the soil with the plate compactor, place 2" of #57 stone, and then compact the stone. 2. Placing the Adjustable Deck PedestalsAfter compacting the stone and giving yourself a firm foundaiton to build off of, assemble the Bison Level Up Adjustable Deck Pedestals by following the manufacturer's recommendations. Place them 16" O.C. on both ends of the deck and make sure that they are perfectly level by adjusting the slope leveler. After confirming that each pedestal is level usign a torpedo level, use a 6' level to adjust all of the pedestals to the same height. To do this, you simply need to rotate the adjustable pedestal support. Once all of the deck pedestals are in place, you can begin the joist installation. 3. Installing the Deck JoistsUsing pressure treated lumber (typically 2"x6", 2"x8", 2"x10", or 2"x12"), cut you joists to length and "Crown" each of the boards to make sure the crown is up. Next, place the joists on the deck pedestals, making sure they are centered on the pedestal on both sides. Then, simply attach the joists to the pedestals using the folding straps and screws. For the outer-most joists, you will need to use framing angle hardware since the joists on the end will not be directly supported by a deck pedestal. 4. Installing the Rim Joists and Skirting Board (if needed)Once all the joists are in place, attach the Rim Joist to end of the Joists by using a bar clamp to hold it in place. Use three screws to secure the rim joist to each deck joist. If the back side of your Rim joist is obstructed (like mine was by my house), you will need to attach it using framing angles. Lastly, if you have a gap below your joists / rim joist, it is recommended that you include a bit of "skirting" reinforcement as shown in the video. 5. Installing the Decking BoardsWith the deck fully framed, you can install the decking boards. For my deck, I used composite decking with hidden fasteners that go in between each board - but you can use any type of decking you want!6. Fascia Board and Final TouchesFor my deck Fascia, I used a peice of composite decking around the top of the perimeter. I mitered the corners and butt joints for a cleaner look. For the bottom, I used PVC fascia trim that painted black. Overall, I think the deck turned out great and it was super nice to not have to dig out concrete footers. Follow me on Instagram: instagram.com/atimprovementsCheck out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ youtube.com/c/AndrewThronImprovements?sub_confirmation=1Check out my Website for additional DIY Content: atimprovements.com▬▬▬▬▬▬▬▬▬▬▬▬▬🎥 MY YOUTUBE GEAR Camera (Iphone Max): amzn.to/3d5HxSoMicrophone (Maono Condenser Mic): amzn.to/3RCAb7NTripod: amzn.to/3Rz5Gj3Mini Tripod: amzn.to/3Rvt2WMLighting: amzn.to/3d4QdZ5▬▬▬▬▬▬▬▬▬▬▬▬▬🛠🧰 TOOLS THAT I USE Carbide Tipped Drill Bit: amzn.to/3S0hdIMTapcon Screws: amzn.to/3OxEWxhDrill: amzn.to/3JICKkkTape Measure: amzn.to/3HaTWgECircular Saw: amzn.to/3BFotC4Masonry Drill: amzn.to/36yP1JWLevel: amzn.to/3HowUDnHammer: amzn.to/35fIpiTChalk Line: amzn.to/3MwSDg8Clamps: amzn.to/3HLqwpKDrill: amzn.to/3JICKkkSawzall: amzn.to/3HcdeSICircular Saw: amzn.to/3BFotC4Jig saw: amzn.to/3I6lcyd▬▬▬▬▬▬▬▬▬▬▬▬▬Thank you so much for watching!*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.#BisonLevelUp #diydeck #adjustabledecksupport #outdoordecking #floatingdeck
This was WAY More Involved than I Expected..(Basement Bathroom Addition - 30 Minute MASTERCLASS) Andrew Thron Improvements 2024-10-13 | FREE Basement Bathroom Remodel Ebook (Everything you need to know)! proud-tiger-97948.myflodesk.com/vdq1kcjggtThis "How to Add a Bathroom to a Basement" Ebook includes step-by-step instructions, a materials list (for everything I used in my basement bathroom), and a detailed cost breakdown for the entire basement bathroom addition project!In this DIY Basement Bathroom Addition "Masterclass", I show you the entire process on adding a bathroom to a basement from start to finish! This video condenses all of the information that I learned during my basement bathroom renovation into an easily digestible video that summarizes the entire project. This video will cover the following basement bathroom projects (note that I have individual YouTube videos linked below that cover each specific project in detail):1. How to Plan Your Basement Bathroom Layout, Get Permits, and Install the Under Slab Plumbing: youtu.be/a4IsilS_vUM?si=OLwfreD9P7v_KgG62: How to Build Basement Bathroom Walls: youtu.be/vWA0ol4veqQ?si=B1SmByIDvTuGg3-u3: How to level an uneven basement flooryoutu.be/BDCyBNyh148?si=z_iTgRwK_RcLTqzJ 4: How to Install LVP Flooring in a Basement Bathroom:youtu.be/uBmDAWguBcA?si=zBZCv8sx6uLV9gfO5. How to Build a Modern Barn Door for a Basement Bathroom: youtu.be/2VkMh3tNSfg?si=YqHIxkGCzbRkluZn6: How to Install a LED Bathroom Mirror: youtu.be/7cSy1x_UnXw?si=WT6MhDwWlJEphtQu7: How to Install a Basement Bathroom Toilet: youtu.be/FzcJcQa0zJM?si=E_gCxIT8Zrj3LJRF8: How to Install a Drop Ceiling in a Basement Bathroom:youtu.be/jBA7TQrHw38?si=rWyXoT3xoHehV48x9: How to Install an Exhaust Fan in a Basement Bathroom: youtu.be/T9gHV0qu3TQ?si=BzsTPeDBQsIcLMOY10. How to Install a Vanity and Backsplash in a Basement Bathroom: youtu.be/XLhNM39VPY0?si=TbOOv0_9BKdXGGovAt the end of this video, you will know the basics on how to add a bathroom to a basement from start-to-finish. Although a basement bathroom addition project is quite involved, it can add a ton of value to your home!This "How to add a Basement Bathroom" Masterclass video was preceded by my "How to Finish a Basement Series". For more information and videos on my entire basement remodel, Check out the video below!Time Lapse of the Entire Basement Renovation: youtu.be/ORHmGqvk6_oAdditionally, I have detailed videos on the entire basement finishing process on my YouTube channel as well. If you plan on finishing a basement and adding a bathroom, these videos will be a great resource for you!▬▬▬▬▬▬▬▬▬▬▬▬▬Follow me on Instagram: instagram.com/atimprovementsCheck out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ youtube.com/c/AndrewThronImprovements?sub_confirmation=1Check out my Website for additional DIY Content: atimprovements.com▬▬▬▬▬▬▬▬▬▬▬▬▬Thank you so much for watching! I learned so much by completing this basement bathroom addition project and I hope that this information is helpful! Good luck!Time Stamps: 00:00 - Inroduction00:40 - Planning and Layout02:27 - Drain Plumbing04:44 - Framing the Bathroom Walls09:27 - Framing around ductwork and pipes09:52 - Leveling the Uneven floor with Self - Leveling Concrete10:58 - Installing the Tub Surround11:32 - Drywall13:00 - Installing LVP Flooring16:30 - Installing the LED Bathroom Mirror19:16 - Building the Custom Bathroom Barn Door20:50 - Installing the Toilet23:28 - Installing the Drop Ceiling25:40 - Installing the Exhaust Fan27:00 - Installing the Sink and Vanity28:22 - Installing the Shower Trim Kit 30:39 - Final Bathroom Reveal and Conclusion*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
This Outdoor Shower Build is INSANE! (How I Built a DIY Oudoor Shower for my Mom) Andrew Thron Improvements 2024-09-22 | Links to Tools, Materials, etc. ⬇️Rapid Set 24/6 Concrete Mix: ctscement.com/product/cts-24-6-concrete-mix Mud Mixer: mudmixer.com/andrewHoft Privacy Panel System: hoftsolutions.comVigo Shower Panel: amzn.to/4eyVHpfAll Set Tile Mortar: ctscement.com/product/all-tile-mortarMetal Drilling Tool: amzn.to/4dun1nHGate Latch: amzn.to/3zqTCfWShower Drain: amzn.to/3MQcbgTLaser Level: amzn.to/3Zy0iUqTiling Trowels: amzn.to/3MTxFJGTile Diamond Polishing Pads: amzn.to/3MSoCITMy Mom has been talking about how much she would love an outdoor shower for years... So this past summer, I finally built her one!Unfortunately, however, the best locaiton for the outdoor shwer was right next to the home's foundation - which introduced a few complications in terms of drainage, etc. To build this DIY Outdoor shower, I followed these general steps: 1. Excavation: I had to excavate the area around 10"-12" to give myself a level and firm base to build on. We rented a mini-excavator for this which made the process way easier. This was my first time operating a mini-excavator and it wasn't to difficult. 2. Drainage:After excavating, I dug a trench for the the shower drain pipe. I put 18" of stone in the trench and then positioned a piece of 2" PVC pipe within the trench to serve as the drain. After sloping the pipe, I backilled the entire trench with stone. 3. Building the Conrete Shower Pan: For my outdoor shower design, I first built a 4'x6' perimeter concrete "curb" to serve as the shower pan surround. I made the curb 8" wide, built the forms using 2"x6" lumber, and mixed the Rapid Set 24/6 Concrete Mix with the Mud Mixer. Next, I put the shower drain in place and poured a concrete sloped shower pan. You ABSOLUTELY need a rapid setting concrete like 24/6 mix if you want to try and slope a shower pan. NOTE: Rapid Set 24/6 Concrete Mix is suitable for Foot Traffic in 8-10 hours and reaches structural strength in 24 hours. 4. Tiling the Shower Pan: After letting the 24/6 concrete mix cure overnight, I tiled the shower pan. I used Rapid Set's All Tile Mortar for the thinset and I installed large format tile that my mom picked out. All Tile Mortar can be used as the thinset for all tile types and sizes. After letting the thinset cure for 5+ hours, I grouted the shower pan tiles. NOTE: You don't NEED to tile the shower pan. You could also just seal the concrete shower pan and use that as the actual pan. 5. Supply Plumbing: For the shower supply plumbing, I tapped the CPVC hot and cold water lines in the crawl space. I cut the pipes using a snap cutter, installed a branch tee, and then glued everything together using CPVC primer and glue. 6. Shower Panel Walls: For the Walls of the Shower, I used the HOFT Privacy Panel System and thier composite board slats. This system was super easy to install. I mounted the vertical posts to the concrete using expansions anchors and then placed the composite slat boards in between the two posts. 7. Installing the Shower head / panel: I used a Vigo Shower Panel for this project and I attached it to the HOFT walls using some bolts. This shower panel is awesome since it has the shower head (obviously), but also a body spray and spray wand function. 8. Final Touches: To complete the outdoor shower build, I caulked around the perimeter of the shower pan, built the shower door (using HOFT posts and composite boards), and installed the gate hardware. Overall, I am really happy with how this outdoor shower turned out. I made one HORRIBLE error when it came to tiling, so let me know in the comments if you "caught" the mistake. My mom has told me over 100x how happy she is with the outdoor shower and I am glad that I was able to make it happen for her. Be sure to subscribe and hit the notification bell so you don't miss any future videos! I have some big plans for the font of the house that I hope will boost the curb appeal!Follow me on Instagram: instagram.com/atimprovementsCheck out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ youtube.com/c/AndrewThronImprovements?sub_confirmation=1Check out my Website for additional DIY Content: atimprovements.com▬🛠🧰 Other TOOLS THAT I USE Carbide Tipped Drill Bit: amzn.to/3S0hdIMDrill: amzn.to/3JICKkkCircular Saw: amzn.to/3BFotC4Masonry Drill: amzn.to/36yP1JWLevel: amzn.to/3HowUDnClamps: amzn.to/3HLqwpKSawzall: amzn.to/3HcdeSICircular Saw: amzn.to/3BFotC4Bar Clamps: amzn.to/3JjFrJe▬Thank you so much for watching!*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
DEAD simple DIY Wainscoting Accent Wall (Dont Overthink It) Andrew Thron Improvements 2024-09-01 | Link to Tools, Materials, and Additional Info @Lowe's : atimprovements.com/wainscoting-accent-wallMDF Boards (1"x3" & 1"x2"): go.magik.ly/ml/24oyaCaulk: go.magik.ly/ml/24oybConstruction Adhesive: go.magik.ly/ml/24oy8Paint: go.magik.ly/ml/24oycPaint Tools (Roller, Brush, Pan): go.magik.ly/ml/24oydBrad Nailer: go.magik.ly/ml/24oyfMirror: go.magik.ly/ml/24rbzHouse Plant: go.magik.ly/ml/24rc3Learn how to install a "dead simple" DIY Wainscoting with this step-by-step video tutorial! I decided to install this Wainscoting in the room adjacenet to my kitchen with the hope of adding a bit of a "accent" to the room. After considering a few differnt accent wall styles, I decided that a Wainscoting (wood paneling that lines the bottom portion of the room) would work best. For this project, I started by purchasing 1"x3" and 1"x2" MDF from Lowes. I also needed a few other materials like construction adhesive, paint, etc. To actually install the wainscoting, I stared by installing the top rail. To do this, I cut the MDF to size and attached it to the wall using construction adhesive and brad nails. Next, I determined the spacing for my veritcal boards and then cut them to the right height. Once cut, I applied construciton adhesive to the backs of the boards and then attached them to the wall with brad nails. **Be sure to use a level to ensure that all boards are level and plumb**After installing all of the 1"x3" boards, I installed a 1"x2" MDF "top cap" to give the Wainscoting a more finished look. Next, I caulked all of the seams and gaps. Once the caulk dried I painted the entire wainscoting with ultra pure white paint. As the final step, I hung an accent mirror in the center of the wainscoting wall and placed a faux plant in the corner. Overall, I think this project compleley transformed the look of the space!🙏 PLEASE SUBSCRIBE IF YOU LIKE THIS TYPE OF CONTENT 😃🧠Keep Learning About DIY Accent Walls 🎬 youtu.be/s6Dj7WpGR0s?si=hy07IbYDOd2Ign3u⬇️Social Media (I would love for you to Follow me on Instagram!) ⬇️Follow me on Instgram!instagram.com/atimprovementsFollow me on Pinterest!pinterest.com/andrewthronimprovementsFollow my FB Page!facebook.com/ATImprovementsCheck out my Website (Blogs, Free Plans, Etc.) atimprovements.com_________*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links (meaning that I may recieve compensation for purchases made using the links above)#lowesfinds #LowesPartner #Ad
The ONLY Drywall Repair Video You Need to Watch! (How to FIX any Size Hole In Drywall Like a PRO) Andrew Thron Improvements 2024-08-11 | Tools, Materials, and Additional Info ➡️ atimprovements.com/drywall-repair-101Learn how to Fix Any Size Hole In drywall with these 6 Easy DIY Methods!In this video, I will show you every method I know for repairing holes in drywall. First, I will show you how to repair small holes and dings with spackle (super easy). Next, I will show you a bunch of different ways to repair medium sized holes in drywall (California Patch, Replacement Patch Panel, etc.). If you need a quick and easy drywall repair, I will show you how to fix a hole with a drywall patch kit (everything included). Additionally, I show you how to use an "Eclipse" patch which will allow you to repair a hole in drywall by only using the patch and paint! If you want additional information on how to repair drywall or if you just want more detailed information in general (spackle vs Joint compound, best repair method, etc.), check out my Blog Article Linked here: atimprovements.com/drywall-repair-101🛠️ Tools and Materials Used in This Video 📦Spackle: amzn.to/4dcjgDSJoint Compound: amzn.to/4fvm0Og120 Grit Sanding Block: amzn.to/4d8zq17Drywall Knives (similar): amzn.to/3LRnTalJab Saw: amzn.to/4fvm5ByOscillating Tool: amzn.to/3yuepijDrywall Patch Kit: amzn.to/3Sx2eblEclipse Patch: amzn.to/4dv2n6WDrywall Tape: amzn.to/4dvVpi8Fiberglass Mesh Tape: amzn.to/3AlLUnl🙏 PLEASE SUBSCRIBE IF YOU LIKE THIS TYPE OF CONTENT 😃🧠Keep Learning About Drywall! 🎬 (My other Videos)youtu.be/amEmCbQYsgg?si=6B95u7eqqLmt66Pdyoutu.be/7vy6HJOLmYo?si=B0Hu0Y7_NpGupj86youtu.be/yEu5oKdESUo?si=yY0LCu2HcLav5cu1⬇️Social Media (I would love for you to Follow me on Instagram!) ⬇️Follow me on Instgram!instagram.com/atimprovementsFollow me on Pinterest!pinterest.com/andrewthronimprovementsFollow my FB Page!facebook.com/ATImprovementsCheck out my Website (Blogs, Free Plans, Etc.) atimprovements.comI have time stamps down below so that you can easily navigate to the type of drywall repair that you need a solution for: Introduction: 00:00Tools and Materials Needed to Repair Drywall: 00:39How to Repair Small Holes in Drywall: 01:11How to Repair Medium Holes in Drywall: 02:39California Patch (Medium Hole Size Repair Method): 03:16Drywall Repair with Replacement Patch Panel: 06:12Easy Repair Patches (Patch Kit, "Eclipse" Patch, etc.): 11:12How to Repair Large Holes in Drywall: 14:11How to Match Drywall Texture (Popcorn, Orange Peel, etc.): 18:08Conclusion: 19:22🎥 MY YOUTUBE GEAR Camera (Iphone Max): amzn.to/3d5HxSoMicrophone 1(Maono Condenser Mic): amzn.to/3RCAb7NMicrophone 2 (Snyco G2 Lavalier): amzn.to/3Td3y1mTripod: amzn.to/3Rz5Gj3_________*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
From Crack House to Curb Appeal! (Incredible DIY Transformation) Andrew Thron Improvements 2024-07-28 | More Info on All of these Projects ⬇️ atimprovements.com/10-curb-appeal-ideas-to-completely-transform-your-home-diy-friendlyA few years ago, I bought the ugliest home in my neighborhood. The Curb Appeal, in particular, was horrible - so I decided to do something about it. In this video, I am going to show you how I transformed the curb appeal of this fixer-upper with various DIY projects. Please note that I have detailed videos for all of the projects included in this DIY Curb Appeal Transformation video and I will link them down below. This curb appeal transformation started off with a handful of cosmetic upgrades. First, I power washed the entire home and I replaced all of the broken pieces of siding. Next, I removed the old abandoned metal chimney and painted the entire house using a paint sprayer. Once the house was painted, I replaced the shutters and switched out the old front door with a new one. These cosmetic projects definitely improved the look of the home, but there was still a ton of work needed. Next, I decided to completely revamp the front entryway. I started by removing the old metal railing and then I resurfaced the concrete steps using a concrete resurfacing product. After that, I demolished the old entry sidewalk and I poured a new concrete landing and curved sidewalk that connected the driveway to the steps leading up to the house. I then replaced the old railing with a new wire railing system. Once the front entryway projects were completed, I turned my attention to the garden and landscaping. I decided to build a concrete landscaping edging to help separate my lawn from my garden. I build the forms using 2"x6" lumber and poured all of the concrete by hand. Next, I installed weed barrier fabric, planted a few evergreen shrubs, and filled the new garden area with black mulch. Once the concrete garden curb was complete, I applied topsoil to the lawn and planted new grass seed. Unfortunately, however, the grass did not grow in nearly as well as I would have liked. And for the final project in my Curb Appeal Transformation, I decided to build a gable porch overhang over the front door. Although this architectural improvement was pretty involved for a DIY project, I think it had (by far) the most dramatic effect on the overall transformation of my home. Please let me know what you think of the DIY Curb Appeal Transformation! I would love to get your feedback on your favorite project, your least favorite project, etc. Links to my Youtube Video going through each of the projects shown in this video are provided below. These videos are very detailed and they will walk you through every step of the project. How to Replace Asbestos Siding Shingles: youtu.be/cqdSg7o5Wv0?si=Oxm9hwoVDz87CHixHow to Remove a Metal Chimney: youtu.be/M3REbaigXdI?si=nQQkLwJpg2K8l7zhHow to Replace a Large Hole In Your Foundation: youtu.be/fTpSxonwbj4?si=7rx1kmDFqJ8ubx1eHow to Replace a Front Door: youtu.be/7LqpVXHd78g?si=nmByIPa9fSi4BUelHow to Resurface Concrete: youtu.be/48qNxTz8iKc?si=RskwLW2IgP0lGvl1How to Pour a New (Curved) Concrete Sidewalk: youtu.be/EJGxT4gNyZU?si=snMqsuAv6a79GpDfHow to Install a Wire Railing In Concrete: youtu.be/IVz9cW0GgJg?si=OZHKXTHi9dhGHe-BHow to Build a Concrete Garden Curb: youtu.be/tcl2k9TkT-w?si=pGVzY_NNDhKe5VJEHow to Build a Gable Porch Roof Overhang: youtu.be/htVscyvaDDc?si=BxWPnDIQoSOpJcw0How to Transform Wood Posts with a Pillar Wrap Product: youtu.be/XS6lhHgp4_M?si=Cp7XrbBrLyN3jEUDIf you enjoyed this Curb Appeal Transformation, I really think you will also like my "Backyard Transformation" Video Linked below: youtu.be/AUujzcGkN-Q?si=XMxzlthhNsoXGzRFIf you are considering tackling a Gable Porch Roof project, I definitely recommend that you check out my EBOOK: atimprovements.com/how-to-build-a-gable-porch-roof-overhang-on-an-existing-house-major-diy-curb-appeal-upgradeFollow me the Gram: instagram.com/atimprovementsBe sure to subscribe and hit the notification bell so you don't miss any future videos! ⬇️ youtube.com/c/AndrewThronImprovements?sub_confirmation=1TOOLS USED for this project ⬇️Drill: amzn.to/3JICKkkCircular Saw: amzn.to/3BFotC4Masonry Drill: amzn.to/36yP1JWLevel: amzn.to/3HowUDnHammer: amzn.to/35fIpiTChalk Line: amzn.to/3MwSDg8Clamps: amzn.to/3HLqwpKDrill: amzn.to/3JICKkkCircular Saw: amzn.to/3BFotC4Air Compressor: amzn.to/34TatJfFraming Nailer: amzn.to/3JGpBYUOrbital Sander: amzn.to/34UwlUDBar Clamps: amzn.to/3JjFrJe*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
DIY Drywall Repair - “California Patch” with Texture Match Andrew Thron Improvements 2024-07-03 | If you have a medium sized hole in drywall, a California Patch is a great repair method. This drywall repair method used the paper face of the drywall as the "seam tape" - which is pretty cool. After making the repair, I used @DAPProducts 2 in 1 Orange Peel Drywall Spray texture to match the surrounding orange peel wall texture. This product has an adjustable spray angle and allows for the density of the spray to be adjusted as well. For more info on DAP's 2 in 1 Orange Peel Drywall Spray texture, check out the link below: dap.com/products-projects/our-brands/spray-texture/?utm_source=youtube&utm_medium=organic_social&utm_campaign=infulencers&utm_content=ATBe sure to Subscribe for more DIY Content!#diy #howto #drywall #ad #DAP
How to Add a Gate to Existing Fence (EASY) #diy Andrew Thron Improvements 2024-06-20 | In this video, I will show you exactly how to add a new gate to an existing fence. The process is super simple and for more information, you can read "How to Add a Gate to an Existing Fence" Blog: atimprovements.com/how-to-add-a-gate-to-an-existing-fence-diy-guide-gate-lock-installIf you need to add a gate to an existing fence, this is the process I recommend. Additionally, I secured everything using Power Pro Screws! I also installed a cool gate latch made by Yard Lock. You can check that out here: amzn.to/3XuSLEMThanks!#diy #fencegate #fence #powerpro #iampowerpro
How to Add a Gate to An Existing Fence (Step-by-Step DIY Guide) Andrew Thron Improvements 2024-06-16 | Link to Tools + Materials + Additional Details on the Project:atimprovements.com/how-to-add-a-gate-to-an-existing-fence-diy-guide-gate-lock-installIn this video, you'll learn how to add a gate to an existing fence and how to install quite possible the most secure gate lock ever made. Adding a gate to an existing fence can enhance the functionality and accessibility of your yard - which is exactly why I chose to build an additional gate. To add a gate to an existing fence, you will need the following tools and materials (these are the exact materials I used in the video):- 3" Power Pro Screws: amzn.to/45m9PhX- Yard Lock Gate Lock: amzn.to/4cmQiR3- Hinges (I bought mine off Amazon): amzn.to/3VDckJI- Measuring tape: amzn.to/3RpCX21- Level: amzn.to/3z1pszt- Drill (or impact driver): amzn.to/4b3vi0i- Circular Saw: amzn.to/3Ruv2AD- Sawzall: amzn.to/3HcdeSIHere are the Step-by-Step Instructions on Adding a Gate to a Fence: Step 1 - Plan the Gate Addition:First, choose the ideal spot for your gate. Ensure it’s easily accessible and fits the intended purpose. Additionally, I chose an area of my yard that had solid 4”x4” posts on either side. Step 2 - Measure the Opening and Cut:Measure the width of the opening where the gate will be installed. Standard garden gates are usually 3 to 4 feet wide, but you can customize based on your needs. If your existing fence is continuous, mark the section where the gate will be. Using a reciprocating saw, cut the fence to create the opening. Make sure to cut straight and smooth edges.Step 3 - Build the Gate:Take the cut section of fence from the previous step and add blocking to the sides. You will also want to add a diagonal brace for additional gate strength. Attach the blocking to the gate frame using 3” exterior rated screws (I personally like Power Pro Screws). You will want to “toe-nail” the screws into the existing fence rails. Step 4 - Attach the Gate to the Fence Post with Hinges:After attaching the support blocking to the new gate, place the gate in the opening. Ensure there is enough clearance at the bottom to prevent dragging on the ground and at the top for smooth operation. I recommend a 1/2" gap on the sides of the gate (between the new gate and the existing vertical posts) so that the gate can open and close without rubbing. Next, secure the hinges to the post and the gate frame. Typically, two hinges are sufficient, but I installed three hinges since my hinges were rather small. . Step 5 - Install the Latch:Although you can install any old gate latch, I decided to install the Yard Lock Gate Lock which could be the most secure gate lock ever made. To install the Yard Lock Gate Lock, you first should attach the latch to the inside of the gate post. Next, drill a hole through the fence post and feed the latch cable through the drilled hole. Next, run the cable through the lock box and then attach the lock box to the outside of the gate / fence post. Next, set your lock box combination and test the gate lock for successful operation.Step 6 - Test and Adjust:Finally, test the gate. Open and close the gate several times to ensure it swings freely and latches securely. Check for any obstructions or uneven ground that might affect its operation. Make adjustments to the hinges, latch, etc. (as needed) to ensure that the gate opens and closes smoothly. Adding a gate to my existing fence only took one afternoon and it only required a few basic tools and materials. With careful planning, the right tools, and some basic DIY skills, I truly believe that anyone can successfully add a gate to an existing fence!Here are my Other Video on Fence and Gate Building: How to Build a Fence: youtu.be/Nst-QWq5Cuc?si=wt4QwZSTbiBLLqAzHow to Build a Gate from Scratch: youtu.be/ogQ4TG3bYB0?si=O5qH-NWm_OZ3oTSEFollow me on Instagram: instagram.com/atimprovementsCheck out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ youtube.com/c/AndrewThronImprovements?sub_confirmation=1▬🎥 MY YOUTUBE GEAR Camera (Iphone Max): amzn.to/3d5HxSoMicrophone (Maono Condenser Mic): amzn.to/3RCAb7NTripod: amzn.to/3Rz5Gj3Mini Tripod: amzn.to/3Rvt2WMLighting: amzn.to/3d4QdZ5▬🛠🧰 TOOLS I USE Drill: amzn.to/3JICKkkTape Measure: amzn.to/3HaTWgECircular Saw: amzn.to/3BFotC4Level: amzn.to/3HowUDnHammer: amzn.to/35fIpiTChalk Line: amzn.to/3MwSDg8Clamps: amzn.to/3HLqwpKDrill: amzn.to/3JICKkkSawzall: amzn.to/3HcdeSICircular Saw: amzn.to/3BFotC4Bar Clamps: amzn.to/3JjFrJe*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
Is this the Most Secure Gate Lock Ever? (How to add a gate to an Existing Fence + Yard Lock Install) Andrew Thron Improvements 2024-06-12 | Is the Yard Lock Gate Lock the most Secure Gate lock ever? In this video, I add a new gate to an existing fence and I install the Yard Lock Gate Lock. Let me know if you think this gate lock is the most secure gate lock ever. #diy #homeimprovement #gatelock #fence #gate
DIY Basement Bathroom Addition from Start to Finish (Learn How to Add a Bathroom to your Basement!) Andrew Thron Improvements 2024-06-01 | Download my FREE Basement Bathroom Ebook! proud-tiger-97948.myflodesk.com/vdq1kcjggtThis "How to Add a Bathroom to a Basement" Ebook includes step-by-step instructions, a materials list (for everything I used in my basement bathroom), and a detailed cost breakdown for the entire basement bathroom addition project!In this DIY Basement Bathroom Addition Video, I show you the entire process on adding a bathroom to a basement from start to finish! This video goes through every single step in the basement bathroom addition process in detail!This video will cover the following basement bathroom projects (note that I have individual YouTube videos linked below that cover each specific project in detail):1. How to Plan Your Basement Bathroom Layout, Get Permits, and Install the Under Slab Plumbing: youtu.be/a4IsilS_vUM?si=OLwfreD9P7v_KgG62: How to Build Basement Bathroom Walls: youtu.be/vWA0ol4veqQ?si=B1SmByIDvTuGg3-u3: How to level an uneven basement flooryoutu.be/BDCyBNyh148?si=z_iTgRwK_RcLTqzJ 4: How to Install LVP Flooring in a Basement Bathroom:youtu.be/uBmDAWguBcA?si=zBZCv8sx6uLV9gfO5. How to Build a Modern Barn Door for a Basement Bathroom: youtu.be/2VkMh3tNSfg?si=YqHIxkGCzbRkluZn6: How to Install a LED Bathroom Mirror: youtu.be/7cSy1x_UnXw?si=WT6MhDwWlJEphtQu7: How to Install a Basement Bathroom Toilet: youtu.be/FzcJcQa0zJM?si=E_gCxIT8Zrj3LJRF8: How to Install a Drop Ceiling in a Basement Bathroom:youtu.be/jBA7TQrHw38?si=rWyXoT3xoHehV48x9: How to Install an Exhaust Fan in a Basement Bathroom: youtu.be/T9gHV0qu3TQ?si=BzsTPeDBQsIcLMOY10. How to Install a Vanity and Backsplash in a Basement Bathroom: youtu.be/XLhNM39VPY0?si=TbOOv0_9BKdXGGovAt the end of this video, everything about the basement bathroom addition process from start-to-finish. Hopefully, this will allow you to add a bathroom to your own basement! Although a basement bathroom addition project is quite involved, it can add a ton of value to your home!This "How to add a Basement Bathroom" Masterclass video was preceded by my "How to Finish a Basement Series". For more information and videos on my entire basement remodel, Check out the video below!Time Lapse of the Entire Basement Renovation: youtu.be/ORHmGqvk6_oAdditionally, I have detailed videos on the entire basement finishing process on my YouTube channel as well. If you plan on finishing a basement and adding a bathroom, these videos will be a great resource for you!▬▬▬▬▬▬▬▬▬▬▬▬▬Follow me on Instagram: instagram.com/atimprovementsCheck out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ youtube.com/c/AndrewThronImprovements?sub_confirmation=1Check out my Website for additional DIY Content: atimprovements.com▬▬▬▬▬▬▬▬▬▬▬▬▬Thank you so much for watching! I learned so much by completing this basement bathroom addition project and I hope that this information is helpful! Good luck!*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
Complete DIY Shed Build in under 5 Minutes - FREE PLANS Andrew Thron Improvements 2024-05-19 | Grab the Free Shed Plans ⬇️atimprovements.com/modern-shed-free-plans-diy-step-by-step-building-guideTwo Summers ago, I completed a DIY shed build from start to finish. This video will show you every step of the shed building process in a Timelapse / overview fashion. For more detailed instructions and tutorials for every project shown in this video, check out my other shed building videos below!I truly believe that if you use my FREE shed framing plans in combination with my YouTube videos, you will know everything you need to build your own shed. Many others have built amazing sheds using my resources already!For 10% off the Proslat Slatwall, use code "ANDREWTHRON10" at proslat.com🛠 🧰 TOOLS AND MATERIALS USED TO BUILD THIS SHEDAir Compressor: amzn.to/34TatJfFraming Nailer: amzn.to/3JGpBYURoofing Nailer: amzn.to/3BEAuYFRoofing Mastic: amzn.to/3ePgBqKOrbital Sander: amzn.to/34UwlUDBar Clamps: amzn.to/3JjFrJeCarbide Tipped Drill Bit: amzn.to/3S0hdIMTapcon Screws: amzn.to/3OxEWxhDrill: amzn.to/3JICKkkTape Measure: amzn.to/3HaTWgECircular Saw: amzn.to/3BFotC4Masonry Drill: amzn.to/36yP1JWLevel: amzn.to/3HowUDnHammer: amzn.to/35fIpiTChalk Line: amzn.to/3MwSDg8Clamps: amzn.to/3HLqwpKDrill: amzn.to/3JICKkkSawzall: amzn.to/3HcdeSICircular Saw: amzn.to/3BFotC4Jig saw: amzn.to/3I6lcydMATERIALS: Shed Windows: amzn.to/3MUmgIFSide Lights: amzn.to/3EY9fvPDecorative Front Lights: amzn.to/3SoQ6X1Overhead LED Bay Light: amzn.to/3ShAWmpAcrylic Window Panels: amzn.to/3W0IayjRoll Up Door - See Roll Up Door Youtube Video BelowBelow are the other detailed videos in my Modern Shed Build Series: *3 Hour "How to Build a Shed from Start to Finish" Masterclass*youtu.be/0rua7eJ_LVs?si=SgTxtoeC_uvPYEshIntroduction to the Modern Shed Series: youtu.be/zr0HnCBwrjoDIY Full Shed Build Time Lapse Video: youtu.be/D9zSUnxk91AShed Foundation Options: youtu.be/M0EI-FO7DuAHow to Frame a Shed Floor: youtu.be/9ZpD06daMeIHow to Frame Shed Walls: youtu.be/nXjUerQh444How to Frame a Shed Roof:youtu.be/Y_RChmd6YHAHow to Install Shed Siding: youtu.be/CBfzH4OSYzEShed Sheathing: youtu.be/NCvIUb0UjRsShed Trim: youtu.be/6bu6ob-pQm8Inexpensive Shed Window Option (Acrylic): youtu.be/J9tkSISXRdsShed Window Install: youtu.be/L6pxrHfv_s4Shed Siding Veneer: youtu.be/2SQKY-spzDk Roll-Up Door: youtu.be/VnjLM9KNomMHow to Build a Shed Ramp: youtu.be/iEzYHe12DLMHow to install asphalt shingles on a shed roof: youtu.be/9ZyUXLy4zK8How to Add Electricity to a Shed: youtu.be/-pRhVgcqa1MShed Organization: youtu.be/qmhCtR9W1TEShed Floor Epoxy: youtu.be/wnChJHcM2Y8If you want to learn how to build the EXACT shed shown in the video, I put together "The Modern Shed Build Course" (bit.ly/3PeKr4V) which includes a materials list🧱, tools list 🛠, and cut list 🪚for each step of the entire shed build process. Basically, this course makes it feel like you built this shed alongside me!Follow me on Instagram: https://www.instagram.com/atimproveme...I post a ton of DIY Reels and other Home Improvement Content Daily!Subscribe to my YouTube Channel ⬇️ https://www.youtube.com/c/AndrewThron...Check out my Website for additional DIY Content: atimprovements.com▬▬▬▬▬▬▬▬▬▬▬▬▬🎥 MY YOUTUBE GEAR Camera (Iphone Max): amzn.to/3d5HxSoMicrophone 1(Maono Condenser Mic): amzn.to/3RCAb7NMicrophone 2 (Snyco G2 Lavalier): amzn.to/3Td3y1mTripod: amzn.to/3Rz5Gj3▬▬▬▬▬▬▬▬▬▬▬▬▬Be sure to subscribe and hit the notification bell so you don't miss any Future Videos!*Content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in description may be affiliate links.
Unboxing - Mud Mixer Accessories Andrew Thron Improvements 2024-05-14 | In this video, I unbox the two newest accessories from Mud Mixer: - The Chute Extensions- The Hopper ExtensionYou can check out Mud Mixer here: www.mudmixer.com/andrewI should be testing out these accessories soon, so be sure to Subscribe if you want to see them in action. Thanks!#diy #homeimprovement #concrete #unboxing
Don’t buy Lattice! Build this DIY privacy Screen instead Andrew Thron Improvements 2024-05-07 | I hate the look of lattice so I built this DIY privacy screen using some pressure treated lumber. Although this method of building a privacy screen is a bit more expensive than lattice, it is totally worth it. Link to Privacy Screen Plans: atimprovements.myflodesk.com/ov5fr8eqa6Let me know what you think and Subscribe for more!#diy #privacyscreen #homeimprovement
Lattice Sucks.. Build this Instead Andrew Thron Improvements 2024-04-30 | I hate the look of lattice so I built this DIY privacy screen using some pressure treated lumber. I secured everything together using Power Pro Screws and I am supper happy with how the project turned out. Let me know what you think and Subscribe for more!#diy #Iampowerpro #homeimprovement
This DIY Project TRANSFORMED my Homes Curb Appeal (How to Build a Gable Porch Roof + Free Plans!) Andrew Thron Improvements 2024-04-14 | Get my FREE "How to Build a Gable Porch" Ebook: atimprovements.com/how-to-build-a-gable-porch-roof-overhang-on-an-existing-house-major-diy-curb-appeal-upgradeCheck out Rapid Set's Concrete Lineup: https://b.link/ATGablePorchHDRSPageBuilding this gable porch roof addition on my fixer-upper home completely transformed the CURB APPEAL of my House! Although it did get me in a little bit of trouble with my City..When I bought this fixer upper home a few years ago, the curb appeal was TERRIBLE. So I did the obvious improvements like power washing the exterior, painting the house, replacing the windows and front door, etc. I even poured a new concrete stair landing and entry sidewalk! However, the house still was very unimpressive from a curb appeal standpoint. As a result, I decided to tackle the ultimate curb appeal project: The Gable Porch Roof Overhang addition!Adding a gable porch roof to your existing house is a MAJOR home improvement project. I spent days just planning the whole project and modeling the porch roof in Sketchup. But after getting it designed, I ordered all of the materials and it was GO TIME. First, I built a new stair landing using Rapid Set's 24/6 Concrete mix which is going to serve as the foundation for my gable porch roof support columns. After that, I removed portions of my home's existing gutters, asphalt shingles, and roof decking so that I could access the front wall of my home. Next, I attached the post anchors to the concrete foundation and cut my 6"x6" vertical support columns to size. After attaching them to the post anchors, I installed the gable porch joists (which were 2"x6" boards) and anchored them to my existing home using hurricane ties. Next, we mounted our ridge board for the gable and cut our 2"x6" common rafters to size. I have super detailed information on all of the gable porch roof framing within my EBOOK linked above! After attaching the common rafters using a framing nailer, I installed the valley plate (also know as a "sleeper") on my existing house. The Valley plate will serve as a solid base for the jack rafters that we will cut and install next. To cut the jack rafters, you will first need to match the pitch of your gable where the jack rafter meets the ridge. For the bottom of the jack rafter, however, you will need to cut it at mitered angle on your circular saw so that it rests flush with the valley plate. In other words, you need to adjust the miter angle on your miter saw so that it matches the pitch of your homes roof. Again, refer to the EBOOK for more info on cutting the jack rafters. Once all of the jack rafters were attached to the valley plate and ridge board using a framing nailer, I decked the gable porch roof with 4'x8' sheets of plywood. Once the gable porch was framed and decked, I installed PVC fascia boards on the sides and the front of the gable. Although I was tempted to install asphalt shingles on the gable porch roof addition myself, my entire roof needed to be replaced. For that reason, I decided to just hire a contractor to install new shingles and gutters on my entire house. It was expensive, but it saved me a whole lot of time. At this point, I turned my attention to the underside of the gable and I installed tongue and groove boards (as a soffit) to give the entire project a more professional look. I stained the lumber a "light walnut" color using Defy Wood Stain. Use code ATIMPROVEMENTS at this link to get 10% off: defywoodstain.com/?dt_id=1268710 Finally, I installed a stone veneer post wrap around the vertical support columns.And at this point, the Gable Porch Roof Overhang project is complete! If you are considering tackling a Gable Porch Roof project, I definitely recommend that you check out my EBOOK:atimprovements.myflodesk.com/gableporchoverhangebookBe sure to subscribe and hit the notification bell so you don't miss any future videos! Here's where you can find Rapid Set's 24/6 Concrete Mix: https://b.link/ATGablePorchHD246CMPage?Follow me the Gram: instagram.com/atimprovementsSubscribe to my YouTube Channel ⬇️ youtube.com/c/AndrewThronImprovements?sub_confirmation=1🛠🧰 TOOLS USED for this projectDrill: amzn.to/3JICKkkTape Measure: amzn.to/3HaTWgECircular Saw: amzn.to/3BFotC4Masonry Drill: amzn.to/36yP1JWLevel: amzn.to/3HowUDnHammer: amzn.to/35fIpiTChalk Line: amzn.to/3MwSDg8Clamps: amzn.to/3HLqwpKDrill: amzn.to/3JICKkkCircular Saw: amzn.to/3BFotC4Air Compressor: amzn.to/34TatJfFraming Nailer: amzn.to/3JGpBYUOrbital Sander: amzn.to/34UwlUDBar Clamps: amzn.to/3JjFrJe▬*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
What’s Faster - Drill or Impact Driver? Andrew Thron Improvements 2024-04-12 | Is a drill faster than an impact driver? You are about to find out!These times were likely a bit faster than typical since Power Pro screws outdrive most other brands. Subscribe for more DIY Content!#diy #Iampowerpro #ad #Homeimprovement
DIY Basement Remodel - Episode 6 (Window Trim Out) #basementfinishing #howto #homeimprovement Andrew Thron Improvements 2024-03-16 | ...
DIY Basement Remodel - Episode 5 (Drywall) #diy #homeimprovement #drywall all Andrew Thron Improvements 2024-03-15 | ...
DIY Basement Remodel -Episode 4 (Replacing Basement Windows) Andrew Thron Improvements 2024-03-12 | ...
DIY Basement Bathroom Addition Timelapse ($7k in materials = $40k in Home Equity!) Andrew Thron Improvements 2024-03-10 | Download my FREE Basement Bathroom Ebook! proud-tiger-97948.myflodesk.com/vdq1kcjggtThis "How to Add a Bathroom to a Basement" Ebook includes step-by-step instructions, a materials list (for everything I used in my basement bathroom), and a detailed cost breakdown for the entire basement bathroom addition project!In this DIY Basement Bathroom Addition Timelapse Video, I show you the entire process on adding a bathroom a basement from start to finish! I do have one disclaimer - Although I did 95% of the work myself, I did outsource the under slab and rough in plumbing since I was able to get a really good price from a contractor. All of the other work was done by me, However! This video will cover the following basement bathroom projects (note that I have individual YouTube videos linked below that cover each specific project in detail):1. How to Plan Your Basement Bathroom Layout, Get Permits, and Install the Under Slab Plumbing: youtu.be/a4IsilS_vUM?si=OLwfreD9P7v_KgG62: How to Build Basement Bathroom Walls: youtu.be/vWA0ol4veqQ?si=B1SmByIDvTuGg3-u3: How to level an uneven basement flooryoutu.be/BDCyBNyh148?si=z_iTgRwK_RcLTqzJ 4: How to Install LVP Flooring in a Basement Bathroom:youtu.be/uBmDAWguBcA?si=zBZCv8sx6uLV9gfO5. How to Build a Modern Barn Door for a Basement Bathroom: youtu.be/2VkMh3tNSfg?si=YqHIxkGCzbRkluZn6: How to Install a LED Bathroom Mirror: youtu.be/7cSy1x_UnXw?si=WT6MhDwWlJEphtQu7: How to Install a Basement Bathroom Toilet: youtu.be/FzcJcQa0zJM?si=E_gCxIT8Zrj3LJRF8: How to Install a Drop Ceiling in a Basement Bathroom:youtu.be/jBA7TQrHw38?si=rWyXoT3xoHehV48x9: How to Install an Exhaust Fan in a Basement Bathroom: youtu.be/T9gHV0qu3TQ?si=BzsTPeDBQsIcLMOY10. How to Install a Vanity and Backsplash in a Basement Bathroom: youtu.be/XLhNM39VPY0?si=TbOOv0_9BKdXGGovIf you prefer videos that have a narration instead of on-screen text, I recommend the you watch my ~15 minute explanation video of the entire basement bathroom renovation process from start to finish: youtu.be/wMjZexNwplg?si=MZyW3OV09y3Bp_FPAt the end of this video, you will know the basics on how to add a bathroom to a basement from start-to-finish. Although a basement bathroom addition project is quite involved, it can add a ton of value to your home!This "How to add a Basement Bathroom" video was preceded by my "How to finish a basement series". For more information and videos on my entire basement remodel, Check out the video below!Time Lapse of the Entire Basement Renovation: youtu.be/ORHmGqvk6_oAdditionally, I have detailed videos on the entire basement finishing process on my YouTube channel as well. If you plan on finishing a basement and adding a bathroom, these videos will be a great resource for you!▬▬▬▬▬▬▬▬▬▬▬▬▬Follow me on Instagram: instagram.com/atimprovementsCheck out my Blog: Atimprovements.comSubscribe to my YouTube Channel ⬇️ youtube.com/c/AndrewThronImprovements?sub_confirmation=1Check out my Website for additional DIY Content: atimprovements.com▬▬▬▬▬▬▬▬▬▬▬▬▬Thank you so much for watching! I learned so much by completing this basement bathroom addition project and I hope that this information is helpful! Good luck!*All content on the Andrew Thron Improvements YouTube channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
DIY Basement Remodel - Episode 3 (Electrical and Insulation) #diy #homeimprovement Andrew Thron Improvements 2024-03-06 | This is week 3 of my DIY Basement Finishing / Remodel Series where I am going to take you through the entire basement renovation process, step-by-step. Download my FREE Basement Finishing EBOOK which will show you ever step of the basement finishing process IN DETAIL so that you can finish your own basement: view.flodesk.com/pages/64d58111cb901ce9eca4533e In week 3 of the basement remodel, I ran new electrical to all of my outlets and to the recessed LED Lighting. One the electrical wiring was installed, I installed insulation between the study bays. I also installed insulation in the floor joists above to minimize the sound of foot-traffic from upstairs. Now that the basement electrical work is done and insulation is installed, we can move on to the next part of the DIY basement renovation. Subscribe for Week 4!
