Solidworks Fun
Part 1 Designing Inlet Duct,Impeller of Water Jet Pump/Propulsion Unit in Solidworks
updated
This is a model of a simple up stacker conveyor system, some proximity sensors are also used to trigger the motion of actuators. Solidworks event based motion is used to perform the desired motion at desired instant.
Hope you like it
Do share your opinion in the comments
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a simple model of an automatic box stacking roller conveyor system, a set of actuators and sensors are used to guide the motion.
Hope you like it
Do share your opinion in the comments
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a simple model of a conveyor in which star wheel is being used to rotate the cartons or boxes, the motion of star wheel is triggered by a proximity sensor positioned nearby the star wheel mounting.
This conveyor is useful in many applications like packaging line, product sorting line, orienting the box or cartons on conveyor line for putting labels on them etc.
Hope you like it
Do share your opinion in the comments
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a simple model of a part flipper conveyor, the motion of flipping wheel is being triggered by a proximity sensor so that wheel starts turning when the part completely gets into it.
Hope you like it
Do share your opinion in the comments
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This tutorial is for creating a simple lathe machine turning operation animation, chips removal is not shown but the reduction of material while each turning operation is clearly animated in the solidworks itself.
Hope you like it
Do share your opinion in the comments
Some similar animation tutorials:
________________________________
1. Drilling operation animation tutorial in solidworks
youtu.be/yhyk9jCEzLY
2. Block cutting or slicing effect animation tutorial in solidworks
youtu.be/T7svZzDN_4E
3. Sheet metal V bending animation
youtu.be/-joGvAsU-3k
4. Sheet metal edge or wipe bending animation
youtu.be/cdjZLO2ywzs
5. Sheet metal U bending animation
youtu.be/x9eOU7N03_s
6. Sheet metal embossing animation
youtu.be/hfqHZFGH8_8
7. Metal cutting or shearing animation
youtu.be/WFCKVTgttAc
8. Metal roll forming animation
youtu.be/FGFayIPpXGY
9. Pipe or tube bending animation
youtu.be/onGFgLAqrgc
10. Flexible bellow animation
youtu.be/VtMNhz923SE
11. Tension spring animation
youtu.be/8xhWVws_0AU
____________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is simple solidworks animation tutorial designed to show how one can create a drilling process animation.
Everything is kept simple and to the point.
Hope you like it
Do share your opinion in the comments
1. Twist drill beat design tutorial in solidworks
youtu.be/Vj_5s2UAUD4?si=nbG9dbFNyFiH92YM
Some similar tutorials:
______________________
1. Block cutting or slicing effect animation tutorial in solidworks
youtu.be/T7svZzDN_4E
2. Sheet metal V bending animation
youtu.be/-joGvAsU-3k
3. Sheet metal edge or wipe bending animation
youtu.be/cdjZLO2ywzs
4. Sheet metal U bending animation
youtu.be/x9eOU7N03_s
5. Sheet metal embossing animation
youtu.be/hfqHZFGH8_8
6. Metal cutting or shearing animation
youtu.be/WFCKVTgttAc
7. Metal roll forming animation
youtu.be/FGFayIPpXGY
8. Pipe or tube bending animation
youtu.be/onGFgLAqrgc
9. Flexible bellow animation
youtu.be/VtMNhz923SE
10. Tension spring animation
youtu.be/8xhWVws_0AU
____________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is simple solidworks animation of cutting or slicing a block using a blade. Some very simple but interesting techniques are used to create this 3d animation.
Hope you like it
Do share your opinion in the comments
Some similar animation tutorials:
________________________________
1. Sheet metal V bending animation
youtu.be/-joGvAsU-3k
2. Sheet metal edge or wipe bending animation
youtu.be/cdjZLO2ywzs
3. Sheet metal U bending animation
youtu.be/x9eOU7N03_s
4. Sheet metal embossing animation
youtu.be/hfqHZFGH8_8
5. Metal cutting or shearing animation
youtu.be/WFCKVTgttAc
6. Metal roll forming animation
youtu.be/FGFayIPpXGY
7. Pipe or tube bending animation
youtu.be/onGFgLAqrgc
8. Flexible bellow animation
youtu.be/VtMNhz923SE
9. Tension spring animation
youtu.be/8xhWVws_0AU
_______________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
In this conveyor system, a simple rotary table with guided rails are used to turn the box by 90 degree and then transfer it to another conveyor in the line.
Hope you like it
Do share your opinion in the comments
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a simple model of a lane diverting conveyor. Proximity sensor is used to distinguish between the different size of boxes and then a flap is used to divert them on other lane. Solidworks event based motion is used here.
Hope you like it
Do share your opinion in the comments
Some similar projects:
_____________________
1. Product sorting conveyor using proximity sensor in solidworks
youtu.be/Bk8mNvNQ6T4
2. Coin sorter machine design in solidworks
youtu.be/TYh2eEu1oes
3. Bottle indexing conveyor design in solidworks
youtu.be/eJz9ySvMRDk
4. Product sorting roller conveyor design in solidworks
youtu.be/KGxy665k-2c
_____________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This a simple model of a box stacking conveyor, solidworks proximity sensor is used to trigger the motion of plunger when stacking of a certain number of boxes is done.
Hope you like it
Do share your opinion in the comments
Some other applications of Solidworks proximity sensor:
___________________
1. Product sorting conveyor with proximity sensor and Event based motion in solidworks
youtu.be/Bk8mNvNQ6T4
2. Box orientation conveyor design with proximity sensor in solidworks
youtu.be/CjnftvNR4P4
3. Product counting conveyor with proximity sensor in solidworks
youtu.be/Qj7Rrtft-v8
___________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a simple project of creating automata waterdrop animation using solidworks motion analysis.
Note: All the dimensions shown are just for the animation purpose only.
Hope you like it
Do share your opinion in the comments
Some other projects:
____________________
1. Marble pump (rotary type) full tutorial in solidworks
youtu.be/ZUFmP50qJx8
2. Marble pump (piston driven) full tutorial in solidworks
youtu.be/OF_q5lpqz50
3. Marble lifter (2 arm) full tutorial in solidworks
youtu.be/DoeDUh0v0XA
4. Marble lifter (1 arm) full tutorial in solidworks
youtu.be/5iHJleK2FT0
5. Coin sorter design assembly and motion study in solidworks
youtu.be/TYh2eEu1oes
6. Marble machine (CAM type) full tutorial in solidworks
youtu.be/dS9rgJ9Hinc
_______________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a simple model of a single arm marble lifter mechanism. This tutorial consists of designing every parts then doing their assembly and finally performing the motion analysis to create a beautiful animation.
Hope you like it
Do share your opinion in the comments
Some similar projects:
____________________________
1. 2 stage arm marble lifter mechanism full tutorial
youtu.be/b8NR7MSBZ5Q (assembly & motion)
youtu.be/DoeDUh0v0XA (parts design)
2. Marble pump design assembly and motion study in solidworks
youtu.be/ZUFmP50qJx8
3. Marble pump run machine (piston driven) full tutorial
youtu.be/OF_q5lpqz50
4. Coin sorter machine design assembly and motion study in solidworks
youtu.be/TYh2eEu1oes
5. CAM and Stairs type marble machine design assembly and motion study in solidworks
youtu.be/dS9rgJ9Hinc
____________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a simple model of a product sorting conveyor, it uses three proximity sensor which measures the product height and triggers the respective plunger.
Hope you like it
Do share your opinion in the comments
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a simple model of a coin sorting machine, all the parts are designed in solidworks and assembly and animation also created in it.
This is very interesting machine, it can be easily created using cardboard also.
Hope you like it
Do share your opinion in the comments
___________________________
Some other designs:
1. Marble pump design assembly motion study tutorial in solidworks
youtu.be/ZUFmP50qJx8
2. Piston driven marble lifter design assembly and motion study tutorial in solidworks
youtu.be/OF_q5lpqz50
3. 2 stage arm marble lifter mechanism design tutorial in solidworks
youtu.be/DoeDUh0v0XA
4. 2 stage arm marble lifter mechanism assembly and motion study tutorial in solidworks
youtu.be/b8NR7MSBZ5Q
5. Cam and stairs type marble run machine design assembly and motion study tutorial in solidworks
youtu.be/dS9rgJ9Hinc
___________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a simple model of a coin sorting machine fully designed and animated in solidworks using its motion study feature.
This type of coin sorter can easily be created using diy, so it's very much practical.
1. Coin sorting machine design assembly and motion study in solidworks tutorial
youtu.be/TYh2eEu1oes
Hope you like it
Do share your opinion in the comments
_______________________
Some other design tutorials
1. Marble pump design assembly motion study tutorial in solidworks
youtu.be/ZUFmP50qJx8
2. Piston driven marble lifter design assembly and motion study tutorial in solidworks
youtu.be/OF_q5lpqz50
3. 2 stage arm marble lifter mechanism design tutorial in solidworks
youtu.be/DoeDUh0v0XA
4. 2 stage arm marble lifter mechanism assembly and motion study tutorial in solidworks
youtu.be/b8NR7MSBZ5Q
5. Cam and stairs type marble run machine design assembly and motion study tutorial in solidworks
youtu.be/dS9rgJ9Hinc
_____________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
Hope you like it
Do share your opinion in the comments
1. 2 stage arm marble lifter mechanism all parts design tutorial in solidworks
youtu.be/DoeDUh0v0XA
____________________
Some other tutorials:
1. Marble pump design tutorial in solidworks
youtu.be/ZUFmP50qJx8
2. Marble lifter machine piston driven tutorial in solidworks
youtu.be/OF_q5lpqz50
3. Marble machine cam and stairs type tutorial in solidworks
youtu.be/dS9rgJ9Hinc
_____________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
1. 2 stage arm marble lifter mechanism assembly and motion study tutorial in solidworks
youtu.be/b8NR7MSBZ5Q
Hope you like it
Do share your opinion in the comments
Thanks for watching
_________________________
Some other tutorials:
1. Marble pump design tutorial in solidworks
youtu.be/RwzEp8s3EDM
2. Marble lifter mechanism mechanism piston driven tutorial in solidworks
youtu.be/OF_q5lpqz50
3. Marble machine cam and stairs type tutorial in solidworks
youtu.be/dS9rgJ9Hinc
__________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a one of the type of marble machine. It consists of two arms. One arm picks the marble from a spoon and transfers it to the other arm. Then the other arm transfers the marble to the track.
This is how it works.
Hope you like it
Do share your opinion in the comments
Full Tutorial:
1. 2 stage arm marble lifter mechanism all parts design tutorial
youtu.be/DoeDUh0v0XA
2. 2 stage arm marble lifter assembly and motion study tutorial in solidworks
youtu.be/b8NR7MSBZ5Q
____________________________
Some other tutorials
1. Marble pump design in solidworks
youtu.be/ZUFmP50qJx8
2. Marble lifter machine piston driven tutorial in solidworks
youtu.be/OF_q5lpqz50
3. Cam and stairs type marble machine tutorial in solidworks
youtu.be/dS9rgJ9Hinc
____________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a marble pump model also known as marble lifter or marble run machine. All the parts design, assembly and motion study are done in solidworks software.
The main purpose was to create such an exciting mechanism of wooden craft in solidworks and perform motion study on it.
Hope you like it
Do share your opinion in comments
Some similar projects:
_________________________
1. Marble pump or lifter machine design assembly and motion study tutorial in solidworks
youtu.be/ZUFmP50qJx8
2. Marble machine cam and stairs type design assembly and motion study tutorial in solidworks
youtu.be/dS9rgJ9Hinc
__________________________
Hope you like it
Do like subscribe and share
Stay connected for such tutorials
This is a marble pump model driven by a piston fitted inside a cylindrical cavity of a wooden block. this project is created in solidworks software.
The parts design, assembly and animation/motion study is done in solidworks.
FULL TUTORIAL: youtu.be/OF_q5lpqz50
The main purpose was to create such an amazing wooden craft in solidworks and perform it's motion study to create such animation.
Hope you like it
Do share your opinion in the comments
Some similar projects:
_________________________
1. Marble pump or lifter machine design assembly and motion study tutorial in solidworks
youtu.be/ZUFmP50qJx8
2. Marble machine cam and stairs type design assembly and motion study tutorial in solidworks
youtu.be/dS9rgJ9Hinc
_________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
Hope you like it
Do share your opinion in the comments
Some other Marble run machine Mechanism:
________________________
1. Marble machine cam and stairs type full tutorial in solidworks
youtu.be/dS9rgJ9Hinc
________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
All the parts are designed in solidworks and animation is created using solidworks motion study.
Hope you like it
Do share your opinion in the comments
1. Marble pump/Marble lifting mechanism design assembly and motion study tutorial in solidworks
youtu.be/ZUFmP50qJx8
Some similar marble machine mechanisms:
_____________________________
1. Marble machine cam and stairs type full tutorial in solidworks
youtu.be/dS9rgJ9Hinc
_____________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a basic design of a simple bottle spacing/indexing conveyor, the main purpose of this project is to simulate the model of such conveyor using solidworks motion study.
Hope you like it
Do share your opinion in the comments
Some other Conveyor design tutorials:
______________________________
1. Roller conveyor design assembly and motion study tutorial in solidworks (Full playlist)
youtube.com/playlist?list=PL8pFbI7LGu73FBGJVhTRBa8ySGt2K7fOe
2. Bottle/can twisting conveyor design in solidworks
youtube.com/playlist?list=PL8pFbI7LGu70w6ityHokGcr8qAo7DQ4Iy
3. Box transport mechanism, Walking beam conveyor design in solidworks
youtube.com/playlist?list=PL8pFbI7LGu70SY98lIeoiOdDXGpqvOS2U
4. Timing screw/feedscrew design in solidworks
youtube.com/playlist?list=PL8pFbI7LGu73AeKt49y84yIhSnc7Lgka4
5. Bottle unscrambler design tutorial in solidworks
youtube.com/playlist?list=PL8pFbI7LGu7007GgPLbE4sRYLv3mxsFIp
_______________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a basic model of a simple lifting conveyor, solidworks path mate motor is used to create this motion study.
Hope you like it.
Do share your opinion in the comments
Some similar Project:
1. Elevating conveyor design assembly and motion study in solidworks (using path mate motor)
youtu.be/qwU8_jqFgr8
_______________________________
1. Various Conveyors design tutorials (Playlist)
youtube.com/playlist?list=PL8pFbI7LGu70N6OaVx0FXEH5Q386ilHuP
2. Bottle/can twisting conveyor tutorials (playlist)
youtube.com/playlist?list=PL8pFbI7LGu70w6ityHokGcr8qAo7DQ4Iy
3. Walking beam conveyor, Box transport mechanism design
youtube.com/playlist?list=PL8pFbI7LGu70SY98lIeoiOdDXGpqvOS2U
_______________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a basic model of product sorting roller conveyor, the central round conveyor used turned with the help of servo to direct the products at different conveyor lines.
Hope you like it
Do share your opinion in the comments
________________________
Some similar conveyor projects:
1. Product sorting conveyor event based motion in solidworks (using proximity sensor)
youtu.be/zL2Ox5XBpzk
2. Product sorting conveyor design assembly and motion study in solidworks
youtu.be/v-AAig4Me7U
3. Box orientation conveyor design in solidworks
youtu.be/CjnftvNR4P4
4. Carton rotation upender conveyor design in solidworks
youtu.be/G-jdCrlMGeA
Various roller conveyors design assembly and motion study in solidworks:
1. Full Playlist
youtube.com/playlist?list=PL8pFbI7LGu70N6OaVx0FXEH5Q386ilHuP
_______________________
Thanks for watching
Do like subscribe and share
Stay connected for such Animations
This Product Upender conveyor works on gravity.
It is a basic model of the conveyor, the main purpose was to simulate this type of conveyor in solidworks motion study.
Hope you like it
Do share your opinion in the comments
___________________________
Some similar conveyor projects:
1. Box orientation conveyor design assembly and motion study in solidworks
youtu.be/CjnftvNR4P4
2. Horizontal carousel conveyor design assembly and motion study in solidworks
youtu.be/DvgAD-kdC1Q
3. Table top chain conveyor design assembly and motion study in solidworks
youtu.be/CjAHrq9Ua-M
4. Modular plastic chain conveyor design assembly and motion study in solidworks
youtu.be/aVd286wsQz4
5. Tubular drag chain conveyor design assembly and motion study in solidworks
youtu.be/ysdbeHnihp4
FOR MORE CONVEYOR DESIGN PROJECTS DO VISIT THE CHANNEL
1. Roller Conveyors design tutorials in solidworks
(Full playlist)
youtube.com/playlist?list=PL8pFbI7LGu73FBGJVhTRBa8ySGt2K7fOe
2. Box transport mechanism conveyors tutorials
youtube.com/playlist?list=PL8pFbI7LGu70SY98lIeoiOdDXGpqvOS2U
3. Different conveyors design tutorials in solidworks
youtube.com/playlist?list=PL8pFbI7LGu70N6OaVx0FXEH5Q386ilHuP
4. Can/bottle twisting conveyor design tutorials in solidworks
youtube.com/playlist?list=PL8pFbI7LGu70w6ityHokGcr8qAo7DQ4Iy
________________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a simple project on conveyor system for material handling, intended to show proximity sensor application in solidworks. solidworks event based motion is used to trigger the motion of actuator.
This type of industrial conveyor belt systems has many applications such as box turning conveyor, box flipper conveyor, box sorting conveyor, product orientation conveyor etc.
Hope you like it.
Do share your opinion in the comments.
__________________________
Some other Proximity sensor projects:
1. Product sorting conveyor tutorial using proximity sensor in solidworks
youtu.be/zL2Ox5XBpzk
2. Product Counting conveyor tutorial using proximity sensor in solidworks
youtu.be/Qj7Rrtft-v8
__________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a basic design of a carousel conveyor, the tutorial includes the designing of chain sprocket, links, frame then assembly. At last, the event based motion is created.
Hope you like it.
Do share your opinion in the comment.
______________________________
Some similar conveyor design tutorials:
1. Table top chain conveyor design assembly and motion study in solidworks
youtu.be/CjAHrq9Ua-M
2. Tubular drag chain conveyor design assembly and motion study in solidworks
youtu.be/ysdbeHnihp4
3. Modular plastic chain conveyor design assembly and motion study in solidworks
youtu.be/aVd286wsQz4
4. Slat chain conveyor design assembly and motion study in solidworks
youtu.be/3XNwgMDMLhw
Some other Conveyors design tutorials:
The Playlist-
1. Roller conveyors design tutorials
youtube.com/playlist?list=PL8pFbI7LGu73FBGJVhTRBa8ySGt2K7fOe
2. Bottle twisting conveyor design tutorials
youtube.com/playlist?list=PL8pFbI7LGu70w6ityHokGcr8qAo7DQ4Iy
_______________________________
Do like subscribe and share
Thanks for watching
Stay connected for such tutorials
This type of conveyor belt system is used as sushi conveyor in restaurant, it has also a wide application in industry.
It is a simple model of a table top chain conveyor.
Hope you like it
Do share your opinion in the comments.
______________________________
Some other Chain Conveyor design tutorials:
1. Slat Chain Conveyor design assembly and motion study in solidworks
youtu.be/zeN_NYf0TlE
2. Modular plastic chain conveyor design assembly and motion study in solidworks
youtu.be/aVd286wsQz4
3. Tubular drag chain conveyor design assembly and motion study in solidworks
youtu.be/ysdbeHnihp4
Various Chain Sprockets design tutorials:
1. The Playlist
youtube.com/playlist?list=PL8pFbI7LGu73NZ6dLaMG1-qFFu70P-0oz
______________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This type of conveyor is also used as sushi conveyor belt in restaurant of Japan. Apart from this, it has wide application in industries.
Parts design, Assembly and motion study all are done in the solidworks.
Full design tutorial:
youtu.be/njqbGvDNguo
Hope you like it.
Do share your opinion in the comments.
Some other Chain Conveyor design tutorials:
1. Slat Chain Conveyor design assembly and motion study in solidworks
youtu.be/zeN_NYf0TlE
2. Modular plastic chain conveyor design assembly and motion study in solidworks
youtu.be/aVd286wsQz4
3. Tubular drag chain conveyor design assembly and motion study in solidworks
youtu.be/ysdbeHnihp4
Various Chain Sprockets design tutorials:
1. The Playlist
youtube.com/playlist?list=PL8pFbI7LGu73NZ6dLaMG1-qFFu70P-0oz
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
A Flexible plastic chain conveyor which is generally used in food processing industries, to transfer light weight loads from one place to another.
This type of conveyors are easy to install, maintain and readjust according to the requirements.
Sharp Turns, Incline/decline spirals and multiple turns are easily possible with a plastic chain conveyor.
This project is all about designing the chain and sprockets of the conveyor and then performing a motion analysis on it.
Hope you like it.
Do share your opinion in the comments.
_____________________________
Some other Projects on Chain Conveyor:
1. Tubular drag chain conveyor design in solidworks
youtu.be/ysdbeHnihp4
2. Slat Chain Conveyor design in solidworks
youtu.be/3XNwgMDMLhw
3. Slat Chain Conveyor (model) tutorial in solidworks
youtu.be/zeN_NYf0TlE
4. Chain and sprockets design (real motion) in solidworks
youtu.be/prsXejPg5c0
5. Chain and sprockets design (real motion) tutorial in solidworks
youtu.be/9qhVefbH-ic
Various Roller Conveyors Design Full tutorials:
1. Playlist is here (with lots of designs)
youtube.com/playlist?list=PL8pFbI7LGu70N6OaVx0FXEH5Q386ilHuP
Various Chain Sprockets Design Full tutorials:
1. Playlist is here
youtube.com/playlist?list=PL8pFbI7LGu73NZ6dLaMG1-qFFu70P-0oz
Various Cam followers design tutorials:
1. Playlist is here
youtube.com/playlist?list=PL8pFbI7LGu71JyflHHdzm-eXEA7ZaQkoI
____________________________
Thanks for watching.
Do like subscribe and share.
Stay connected for such tutorials.
This is a basic model of a tubular drag chain conveyor. The tutorial consists of designing the drag chain, sprockets, pipe conveyor frame and then all these parts are assembled, then the Final Motion Analysis is done.
Note: This is just a model, created for basic learning purpose only.
Hope you like it.
Do Share your opinion in the comments.
___________________________
Some other Chain Sprockets Design Tutorials are here:
1. The Playlist of Chain Sprockets Design tutorials
youtube.com/playlist?list=PL8pFbI7LGu73NZ6dLaMG1-qFFu70P-0oz
___________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a very basic model of a military tank, the main purpose of this project was to show how to simulate the caterpillar track in solidworks.
The One side caterpillar track motion tutorial is here:
youtu.be/mjwHXI3J7Z0
Hope you like it
Do share your opinion in the comments
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
The purpose was not a make a real caterpillar track but to simulate a simple track in solidworks motion study.
Hope you like it
Do share your opinion in the comments
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
This is a very basic model of a slat chain conveyor, used just for animation purpose only.
For a similar but something Real like Slat Chain Conveyor design assembly and motion study, do watch this tutorial :
youtu.be/3XNwgMDMLhw
Hope you like it
Do share your opinion in the comments
________________________
1. Chain Sprocket Design Assembly and Motion Study in solidworks (same size sprockets)
youtu.be/9qhVefbH-ic
2. Chain Sprocket Design Assembly and Motion study in solidworks (different size sprockets)
youtu.be/prsXejPg5c0
________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
The tutorial consists of designing a Cam profile for for flat faced follower.
Splines are used to create the displacement diagram and the final Cam profile. Since, the main purpose was to create a Cam profile using textbook based graphical method.
Hope you like it.
Do share your opinion in the comments.
___________________________
1. Parallel indexing Cam mechanism design in solidworks
youtu.be/sMwGl3_C3QI
2. Cam profile design for inline roller follower in solidworks
youtu.be/Rib-_ZK8KfE
3. Cam profile design for offset roller follower in solidworks
youtu.be/kMqdXIZwkH8
4. Cam profile design for inline knife edge follower in solidworks
youtu.be/ZgEhFyacFA0
5. Cam profile design for offset knife edge follower in solidworks
youtu.be/vUh55ku8Y5g
6. Cam profile for knife edge follower having uniform acceleration and retardation
youtu.be/uuu-ymqVjNw
__________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
The tutorial consists of designing the Cam profile for knife edge follower using textbooks based graphical method.
Note: The displacement diagram & final Cam profile are drawn using splines. Since the purpose was to create a Cam profile using graphical method.
Hope you like it.
Do share your opinion in the comments.
____________________________
1. Cam profile design for inline knife edge follower in solidworks
youtu.be/ZgEhFyacFA0
2. Cam profile design for offset knife edge follower in solidworks
youtu.be/vUh55ku8Y5g
3. Cam profile design for inline roller follower in solidworks
youtu.be/Rib-_ZK8KfE
4. Cam profile design for offset roller follower in solidworks
youtu.be/kMqdXIZwkH8
5. Parallel indexing cam mechanism design and motion study in solidworks
youtu.be/sMwGl3_C3QI
__________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
The tutorial is about designing an offset knife edge follower using graphical based method.
Note: In the Tutorial, Splines are used to create the displacement diagram and the final cam profile. Since the main purpose was to show how to create cam profile using textbook based graphical method in solidworks.
Hope you like it.
Do share your opinion in the comments.
____________________________
1. Cam profile design for inline knife edge follower in solidworks
youtu.be/ZgEhFyacFA0
2. Cam profile design for inline roller follower in solidworks
youtu.be/Rib-_ZK8KfE
3. Cam profile design for offset roller follower in solidworks
youtu.be/kMqdXIZwkH8
4. Parallel indexing cam mechanism design assembly and motion study in solidworks
youtu.be/sMwGl3_C3QI
____________________________
Thanks for watching
Do like subscribe and share
Stay connected for such tutorials
The Tutorial consists of designing a cam profile for inline knife edge follower & simple harmonic motion.
The textbook based graphical method is being used to create the displacement diagram and the final cam profile.
Note: Here, Splines are used to create the displacement diagram and the final shape of the cam profile. Since the main purpose was to design a cam profile using textbook based graphical method.
Hope you like it.
Do share your opinion in the comments.
------------------------------------------
1. Cam Profile design for Offset Knife edge follower tutorial in solidworks
[ will be available soon ]
2. Cam profile design for inline knife edge follower with uniform acceleration & retardation in solidworks
[ will be available soon ]
------------------------------------------
1. Cam profile design for inline roller follower in solidworks
youtu.be/Rib-_ZK8KfE
2. Cam profile design for offset roller follower in solidworks
youtu.be/kMqdXIZwkH8
3. Parallel indexing Cam mechanism design assembly and motion in solidworks
youtu.be/sMwGl3_C3QI
------------------------------------------
Thanks for watching
Do like subscribe and share
Stay Connected for such tutorials
Designing a Cam Profile for offset roller follower having simple harmonic motion.
The Textbook based 'Graphical Method' is used to create the displacement diagram and the final cam profile.
Note: Here, Splines have been used to create the displacement diagram as well as the final shape of cam profile.
Since, the main purpose was to create a cam profile based on graphical method shown in theory of machine textbooks.
Hope you like it.
Do share your opinion in the comments.
____________________________
1. Cam profile design for inline roller follower in solidworks
youtu.be/Rib-_ZK8KfE
2 Parallel Indexing Cam Mechanism Design in Solidworks
youtu.be/sMwGl3_C3QI
____________________________
Thanks for watching.
Do like subscribe and share.
Stay Connected for such tutorials.
This Tutorial consists of designing a cam profile for inline roller follower & simple harmonic motion.
The Textbook Based Graphical Method is used to construct the displacement diagram and then the final cam profile.
Note: In this Tutorial, Splines are used to create the displacement diagram and the final shape of cam profile. Since the Purpose was just to create a cam profile based on graphical method explained in theory of machine text books.
Hope you like it.
Do share your opinion in the comment.
Thanks for watching.
Do like subscribe and share.
Stay connected for such Tutorials.
Note: this is a model only.
Hope you like it.
Do share your opinion in the comment.
-------------------------------------------------------
1. Barrel Cam indexing table tutorial in solidworks
youtu.be/_Z9UyvgefSg
2. Various Cam and Followers Mechanism Animation
youtu.be/GYVgGSQjX2U
3. Kinematic Chain Classification and inversions animation
youtu.be/3eVQA6AyE7A
__________________________________
Thanks for watching.
Do like subscribe and share.
Stay Connected for such tutorials.
1. Parallel Indexing Cam design animation in solidworks tutorial
youtu.be/sMwGl3_C3QI
Hope You like it.
Do share your opinion in the comment.
Thanks for watching.
Do like subscribe and share.
Stay connected for such animations.
Here a very basic model of robot is used because the main aim was to show how to create this type of animation in solidworks.
Hope You like it.
Do share your opinion in the Comment.
----------------------------------------------
1. Pick and Place Robot Animation tutorial in solidworks
youtu.be/_GGdg9lE8VI
2. Scara Robot Design assembly and Motion Study in Solidworks
youtu.be/HwO_pKAeYqY
3. Delta Robot Design Assembly and Motion Study in Solidworks
youtu.be/dkcGVHUwgCY
4. Mars Curiosity Rover Animation in Solidworks
youtu.be/007SnaUxi40
----------------------------------------------
Thanks for Watching.
Do like Subscribe and Share.
Stay Connected for Such Tutorial.
The Robot model used in this project is very basic, Since the main intension was to show that how to create a pick and place animation on packaging conveyor.
[ Full Tutorial will be available soon ]
Hope you like it.
Do share your opinion in the comment.
________________________________
1. Pick and Place Robot Animation tutorial in Solidworks
youtu.be/_GGdg9lE8VI
2. SCARA Robot Design Assembly Motion Study in Solidworks
youtu.be/HwO_pKAeYqY
3. Delta Robot Design Assembly and Motion Study in Solidworks
youtu.be/dkcGVHUwgCY
4. NASA Curiosity Rover Animation in Solidworks
youtu.be/007SnaUxi40
________________________________
Thanks for Watching
Do like Subscribe and Share
Stay Connected for Such Animations
This is a very simple pick and place robot, the main purpose of this project is to show how to perform this type of pick and place animation in solidworks.
Hope You like it.
Do share your opinion in the comments.
-----------------------------------------------
1. Scara Robot Design assembly and Motion study in solidworks
youtu.be/HwO_pKAeYqY
2. Pick and Place Delta Robot tutorial in solidworks
youtu.be/dkcGVHUwgCY
3. JPL Curiosity Rover Animation in Solidworks
youtu.be/007SnaUxi40
------------------------------------------------
Thanks for watching.
Do like subscribe and share.
Stay Connected for Such Tutorials.
The robot in this model is very basic, the Main Intention of this project is to show how to create this type of pick and place animation in Solidworks.
1. Pick and Place Robot Animation tutorial in Solidworks
youtu.be/_GGdg9lE8VI
----------------------------------------------
1. Scara Robot Design assembly and Motion study in solidworks
youtu.be/HwO_pKAeYqY
2. Pick and Place Delta Robot tutorial in solidworks
youtu.be/dkcGVHUwgCY
3. JPL Curiosity Rover Animation in Solidworks
youtu.be/007SnaUxi40
------------------------------------------------
Hope you like it.
Do share your opinion in the comments.
Thanks for watching.
Do like subscribe and share.
Stay connected for such animation.
Note: This is just an animation project. Mechanism Kinematics, Calculation of forces or any other types of mechanism related things are not being analysed.
Hope you like it.
Do Share Your Opinion in the Comment.
Thanks for watching.
Do like subscribe and share.
Stay connected for such tutorials.
1. Full Tutorial
( will be available soon)
Hope You like it.
Do share your opinion in the comments.
Thanks for watching.
Do like subscribe and share.
Stay connected for such animation.
This is a basic model of the grabbing mechanism used in the famous claw machine game.
Note: The Dimensions shown in this tutorial are intended just for this animation project only.
Hope you like it.
Do share your opinion in the comments.
________________________________
1. Robot Gripper Mechanism Design tutorial in Solidworks
youtu.be/tT0NDSsJ4HA
2. Servo Motor Driven Robot Gripper design tutorial in Solidworks
youtu.be/L7KTPfWf0XM
________________________________
Thanks for watching.
Do like subscribe and share.
Stay connected for such tutorials.