Minecraft VS2: How to make Round Wheels with Vmod | Tutorial Foochie A 2026-09-24 | Minecraft VS2: How to make Round Wheels with Vmod | Tutorial
Demonstrating the Benefit of “Valve Cutoff” with 2 Engines. #3dprinting #engine #compressedair Foochie A 2025-10-11 | ...
3D printed AIR Engine Lifts Bike Frame Like Nothing. #3dprinting #compressedair #diy Foochie A 2025-09-30 | ...
Small rant about my engines shitty design and how I’m fixing it Foochie A 2025-09-19 | I don’t usually do a lot of talking I’m my videos but I figured what the hell and decided to go on a spiel about my engines and the projects I’ve swamped myself in lol
Using an Air Engine to Whip cream #3dprinting #steampunk #3dprintingmachine Foochie A 2025-09-08 | ...
This Took Me 1.5 Days To Sketch, Model & Build #3dprinting #engineering #steamengines Foochie A 2025-09-04 | ...
Improved Beam engine pump (Pneumatic) #3dprinting #steampunk #3dprintingmachine Foochie A 2025-08-31 | ...
Running the engines I’ve made this summer. #3dprinting #steampunk #3dprintingmachine Foochie A 2025-08-29 | ...
3D printed Pneumatic James Watt Beam Engine. #3dprinting #3dprintingmachine #machine Foochie A 2025-08-28 | ...
Control test of all levers and steering #steampunk #3dprinted #modelengineering Foochie A 2025-08-15 | ...
New gearshift (Needs Improvement) #3dprinting #steampunk #3dprintingmachine Foochie A 2025-08-13 | ...
3D printed Traction Engine: Steering Test around the house #3dprinting #modelengine #engineering Foochie A 2025-08-03 | ...
Slow Motion Engine Reversal | Steam Engine Valve Gear #3dprinting #steampunk #steamengines Foochie A 2025-07-20 | ...
3D printed Traction Engine Project: Demonstrating Valve Cut-off Foochie A 2025-07-15 | This is my project trying to build a traction engine with mostly 3D printed parts.I am using a Lego pneumatic cylinder and switch for the engine.For those wondering what “Cut-off” is:Basically it is changing how long the valve is open during the piston stroke. allowing for work to be applied to the piston by expansion of gasses rather than off of the full pressure alone. allowing the engine to run more efficiently and saving fuel.This is accomplished by the valve gear mechanism. in which can control cut-off as-well as it can completely reverse the timing and therefore reverses the engine.Many types of valve gear have been invented overtime with each solving their own issues and making some in the process the valve gear shown here is Stephensons reverse link which dates back to 1841 invented by draughtsman William Howe and pattern maker William Williams both employees of Robert Stephenson who attached his name to it.
3D Printed Pneumatic Traction Engine Progress: Engine mounted to the boiler and test running. Foochie A 2025-07-11 | Have been working on this for over a month and took me 1 month to finish the prototype.Now I am working on the finished model and it’s going well so far.#steampunk #3dprinting #diy #engine
New crankshaft for the engine #3dprinting #steampunk #machine #3dprintingtechnology Foochie A 2025-07-11 | ...
Progress on the 3D printed traction engine (Running!!!) #modelengineering #3dprinting #steampunk Foochie A 2025-07-07 | ...
Crazy Steam Punk Design :) #3dprinting #engine #steampunk #farming Foochie A 2025-06-03 | I’ve improved the reverse timing it’s now pretty reliable in reverse
3D Printed Air Engine (Update: Fixed the Valve Gear) Foochie A 2025-06-01 | I made the eccentric rods 1 mm longer and thinned them out a bit seems to make a hell of a difference.I also made a new reach rod for the reverser lever since it was sitting at a weird angle before
New Reverse Lever for the engine.(Pneumatic Traction Engine Project)#diy #tractionengine #3dprinting Foochie A 2025-05-26 | ...
New 3D printed reversible Air engine and 2 speed gearbox (Prototype Testing) Foochie A 2025-05-16 | ...
Lego Pneumatic Locomotive 0-4-0 (with engine explanation) Foochie A 2025-04-11 | #lego #legosteampunk #diy #legoengineering #legopneumatic #legos #legotechnic #legoyoutube
Lego Pneumatic Locomotive 0-4-0 (with 62mm drivers) Foochie A 2025-04-10 | #lego #legosteampunk #diy #legoengineering #legopneumatic #legos #legotechnic #legoyoutube Engine specs-Bore: 12mm-Stroke: 24mm-Driver diameter:62mm-Working pressure: 35 psi-Weight of engine: unknown (will add when calculated)-2 cylinder 90° crank offset No valve gear (forward only)
