Craycle FPV Orca V2 | 3D Printed RC Plane Build and Maiden @craycle

Craycle PDF User Guide of FPV Orca V2: bit.ly/orcav2_guide

Orca V2 Printed Kit: craycle.com/printed-kits

Orca V2 STL File: craycle.com/product/fpvorca-stl

Note! If you have already bought Orca V1, this is free upgrade for you. Check your mailbox and get your updated Orca V2 for free. If you need help about that, send a mail to info@craycle.com.

Enjoy your new Orca V2!

Sections:
00:00 - Intro
00:06 - Building Fuselage
01:00 - Building Wings
02:00 - Elektronic Setup
04:00 - Final Checks
04:30 - Flight

Key Innovations on V2:
-Common Slicer Settings Profile
-Support-free Printing
-Continuous Printing
-Larger interior volume
-Much Stronger Wing and Fuselage
-Easier setting CG without adding weight
-DJI - Vista and Analog FPV Hatches
-FPV system cooling vents
-800mm Wingspan
-Second Service Cover for FC and Other Extra Electronics
-New 3D Printed Spring lock design
-And more minor design improvements...

FPV Orca V2 is; Longer, stronger, lighter, more stable according to V1. Also it's completely support free and has continuous printing as well.

Perfect cooling design compatible with DJI Air Unit, Caddx Vista and Analog FPV systems. Extra engine cooling.

Orca V2 is optimized for normal PLA and PetG. You can also print this model with a Resin Printer.

It can fly long time with up to 3000 mAh battery. You can put your flight controller, GPS and telemetry module. Orca has a big loading space, easy to accessible electronics, easy to printing (support free) and quick assembling process.

General Specs:
Length : 365 mm
Wingspan : 800 mm
Print Weight : 217 gram
Flying Weight : 450-550 gram
Wing Area : 12.5 dm2
Wing Loading : 40g/dm2

Recommended Electronics:
-2207 2750Kv Brushless Motor - amzn.to/3rmhDO7
-30A ESC - amzn.to/34BFXD1
-6x2 Propeller - amzn.to/3JGX1Xg
-4s 1500 mAh Lipo - amzn.to/3KL9Dh8
-9gram MG Servo - amzn.to/37SKK4N
-Transmitter and Receiver - amzn.to/3ourRuu

Required Tools and Accessories:
-Caddx Air Unit FPV Kit - amzn.to/3KIq8dP
-Caddx Polar Vista FPV Kit - amzn.to/3M6FKs8
-Caddx Peanut Action Camera - amzn.to/3Ei162P
-Push Roads and Connectors - amzn.to/3jGxYc0
-Non-Slip Battery Starps - amzn.to/3KMj9AA
-eSUN PLA+ Filament - amzn.to/3jCfoC7

STL Files Download Included:
-STL Files.
-Cura Profile.
-Ready to print G-code files (G-codes needs min 180x180mm print area).
-User Guide (Detailed for assembling and printing).
-Tech support.

Note: DJI Air Unit and Caddx Vista Hatches are not included in files.
DJI Air Unit Hatch : craycle.com/product/orca-v2-dji-air-unit-hatch
Caddx Vista Hatch :craycle.com/product/orca-v2-caddx-vista-hatch

We have "Craycle Crafter Group" on Facebook. You can join us to check out to the other people's prints and builds: bit.ly/craftergroup

You can support us that we can make design new planes. Free models will be available too with your supports in the near future: www.craycle.com

Follow Us:
bit.ly/craycleinstagram
facebook.com/craycle
https://tr.pinterest.com/craycle/_cre...
behance.net/crayclehobby

Thanks for watching and your interest...

#3dprinting #djifpv #diyrcplane

updated 2 years ago

Craycle FPV Orca V2 | 3D Printed RC Plane Build and Maiden

Craycle 2022-04-14 | PDF User Guide of FPV Orca V2: bit.ly/orcav2_guide

Orca V2 Printed Kit: craycle.com/printed-kits

Orca V2 STL File: craycle.com/product/fpvorca-stl

Note! If you have already bought Orca V1, this is free upgrade for you. Check your mailbox and get your updated Orca V2 for free. If you need help about that, send a mail to info@craycle.com.

Enjoy your new Orca V2!

Sections:
00:00 - Intro
00:06 - Building Fuselage
01:00 - Building Wings
02:00 - Elektronic Setup
04:00 - Final Checks
04:30 - Flight

Key Innovations on V2:
-Common Slicer Settings Profile
-Support-free Printing
-Continuous Printing
-Larger interior volume
-Much Stronger Wing and Fuselage
-Easier setting CG without adding weight
-DJI - Vista and Analog FPV Hatches
-FPV system cooling vents
-800mm Wingspan
-Second Service Cover for FC and Other Extra Electronics
-New 3D Printed Spring lock design
-And more minor design improvements...

FPV Orca V2 is; Longer, stronger, lighter, more stable according to V1. Also it's completely support free and has continuous printing as well.

Perfect cooling design compatible with DJI Air Unit, Caddx Vista and Analog FPV systems. Extra engine cooling.

Orca V2 is optimized for normal PLA and PetG. You can also print this model with a Resin Printer.

It can fly long time with up to 3000 mAh battery. You can put your flight controller, GPS and telemetry module. Orca has a big loading space, easy to accessible electronics, easy to printing (support free) and quick assembling process.

General Specs:
Length : 365 mm
Wingspan : 800 mm
Print Weight : 217 gram
Flying Weight : 450-550 gram
Wing Area : 12.5 dm2
Wing Loading : 40g/dm2

Recommended Electronics:
-2207 2750Kv Brushless Motor - amzn.to/3rmhDO7
-30A ESC - amzn.to/34BFXD1
-6x2 Propeller - amzn.to/3JGX1Xg
-4s 1500 mAh Lipo - amzn.to/3KL9Dh8
-9gram MG Servo - amzn.to/37SKK4N
-Transmitter and Receiver - amzn.to/3ourRuu

Required Tools and Accessories:
-Caddx Air Unit FPV Kit - amzn.to/3KIq8dP
-Caddx Polar Vista FPV Kit - amzn.to/3M6FKs8
-Caddx Peanut Action Camera - amzn.to/3Ei162P
-Push Roads and Connectors - amzn.to/3jGxYc0
-Non-Slip Battery Starps - amzn.to/3KMj9AA
-eSUN PLA+ Filament - amzn.to/3jCfoC7

STL Files Download Included:
-STL Files.
-Cura Profile.
-Ready to print G-code files (G-codes needs min 180x180mm print area).
-User Guide (Detailed for assembling and printing).
-Tech support.

Note: DJI Air Unit and Caddx Vista Hatches are not included in files.
DJI Air Unit Hatch : craycle.com/product/orca-v2-dji-air-unit-hatch
Caddx Vista Hatch :craycle.com/product/orca-v2-caddx-vista-hatch

We have "Craycle Crafter Group" on Facebook. You can join us to check out to the other people's prints and builds: bit.ly/craftergroup

You can support us that we can make design new planes. Free models will be available too with your supports in the near future: www.craycle.com

Follow Us:
bit.ly/craycleinstagram
facebook.com/craycle
https://tr.pinterest.com/craycle/_cre...
behance.net/crayclehobby

Thanks for watching and your interest...

#3dprinting #djifpv #diyrcplane

Craycle Orca V3 | 1000 mm Wingspan (25% Scaled Up!)

Craycle 2024-08-14 | This is an honest video of our first scaling experience. It wasn't a planned shoot, but I think it's a nice memory video. A video where you can feel the work we do here. Almost every day goes by like this.

We already knew that our models could be scaled without any problems, but the new versions had eliminated any potential errors. So we tried scaling a 3D Printed model. Of course, we started testing with our first model, the FPV Orca model.

As you can see in the video, we also scaled the CraycleCub, but the takeoff moment was not recorded for it. For this reason, I did not use the flight footage in the video. We can make a separate video later.

All Craycle models are scalable 3D Printed models and you can print your model in any size you want. It was easier than we thought to do this and it is almost no different from the normal scale. We will also produce content on how to do it. If you are curious, please let me know in the comments.

Craycle Orca V3: craycle.com/product/fpvorca-stl

Other Craycle Models: craycle.com/store
We have a "Craycle Crafter Group" on Facebook. You can join us to check out the other people's prints and builds: bit.ly/craftergroup

Follow Us:
bit.ly/craycleinstagram
facebook.com/craycle
https://tr.pinterest.com/craycle/_cre...
behance.net/crayclehobby

Thanks for watching us...

#inav #djifpv #craycleorca

Craycle Discover | First Inav Flight

Craycle 2024-07-24 | Hello friends, this is our first INAV flight with Discover. We used SpeedyBee F405 Wing and Runcam Vista FPV system. It was a very tense and exciting test. We tried auto-launch and everything was fine. We had a hard time flying with Horizon mode, we needed to configure PID and reduce the flap movements. We didn't think of flying in manual mode, it would be more comfortable.
We tried RTH and it works perfectly, the model feels like a real UAV. It's entertaining to watch when FC takes control. We can't wait to make new flights. We are planning to take 2 Discover and Chase flights.
I'm currently working on Orca V3, I'm wondering how it will fly with INAV. We would be very happy if you could share your experiences with INAV settings.
We wish everyone a pleasant flight.
Craycle Team...

Craycle Orca V2 | Kutahya Flight Memory

Craycle 2024-02-08 | This video is from last year, when we were flying frequently with Orca. We had a perfect flight with my father's family and all his relatives during our trip to Kütahya. Endless thanks to Beyza for immortalizing this beautiful day. We wanted to share this memory on the Craycle YouTube channel to make it immortal. I hope you like the video. Enjoy watching.

About Orca V2:

PDF User Guide bit.ly/pdfguideorcav2
Printed Kit: craycle.com/printed-kits
STL Files: craycle.com/product/fpvorca-stl

General Specs
Length : 365 mm
Wingspan : 800 mm
Print Weight : 217 gram
Flying Weight : 450-550 gram
Wing Area : 12.5 dm2
Wing Loading : 40g/dm2
Airfoil : MH 45 9.85%
Minimum 3D Printer Size: 150x150x150 mm
Material: Regular PLA (LW-PLA Compatible)

Recommended Electronics:
-2207 2750Kv Brushless Motor - amzn.to/3rmhDO7
-30A ESC - amzn.to/34BFXD1
-6x2 Propeller - amzn.to/3JGX1Xg
-4s 1500 mAh Lipo - amzn.to/3KL9Dh8
-9gram MG Servo - amzn.to/37SKK4N
-Transmitter and Receiver - amzn.to/3ourRuu

Required Tools and Accessories:
-Caddx Air Unit FPV Kit - amzn.to/3KIq8dP
-Caddx Polar Vista FPV Kit - amzn.to/3M6FKs8
-Caddx Peanut Action Camera - amzn.to/3Ei162P
-Push Roads and Connectors - amzn.to/3jGxYc0
-Non-Slip Battery Straps - amzn.to/3KMj9AA
-eSUN PLA+ Filament - amzn.to/3jCfoC7

We have a "Craycle Crafter Group" on Facebook. You can join us to check out the other people's prints and builds: bit.ly/craftergroup

Follow Us:
bit.ly/craycleinstagram
facebook.com/craycle
https://tr.pinterest.com/craycle/_cre...
behance.net/crayclehobby

Thanks for watching and your interest...

#3dprinting #djifpv #orcav2

CraycleCub Maiden Flight!

Craycle 2023-12-26 | Happy New Year! Here are some flight footage from the last flight. STL Files and ARF / PNF Printed Kits are available at craycle.com! Stay tuned for new videos and awesome new products as DIY Kits and STL Files. #crayclecub #craycle #printedkit

6pcs Ender3 V3 Assembling Timelapse

Craycle 2023-12-16 | This is a temporary printing room. We will continue to serve you here while the new production office is being built. In this process, we have already started to increase the number of machines. We are using @Creality3D Ender 3 V3 SE printers now. Increasing our production capacity allowed us to reduce prices. Visit craycle.com for current Printed Kit prices!

Thank you for supporting us!

#craycle #printedkitproduction #printedkit #rcplanes #creality

CraycleCub TimeLapse Full Build

Craycle 2023-12-11 | CraycleCub Quick Build Video! Did you like the
video style? Please share your thoughts in the
comments. As you know, we also have the flight video.
We will share the flight video very soon. #crayclecub
#rcplane #trainerplane #fpvplane #supercub

Preparing pushrods and wheels for Craycle Discover! #landinggear #craycledsicover #pushord

Craycle 2023-10-17 | The Craycle Discover is the most functional model we made! We have developed an FPV Platform that can be used in different projects for many purposes, especially cinematic shots.

Craycle Discover STL files: bit.ly/discoverstl

-- Key Features --
Modular Electronic Platform
Free Electronic Plate Options are Available
Quick-Release Swaphable Action Camera Holder
Quick-Release Detachable Wings
Wingtip and Backlights for Night Flights
Optimized Cooling Vents Area
Swaphable FPV Hatch
Huge Service Hatches
Huge Interior Volume
High Safety for Action and FPV Cameras
High Battery Carrying Capacity
Common Craycle Cura Profile
180x180x180 mm Minimum Printer Size

General Specs
Length: 575 mm
Wingspan: 1200 mm
Print Weight: 607 grams
Flying Weight: 1100 grams
Wing Area: 18.7 dm2
Wing Loading: -
Airfoil : E205 (10.48%)
180x180x180 mm Minimum Printer Size

Recommended Electronics
Emax XA2212 1400KV Brushless Motor
30/40A ESC
8"/9"/10" Propeller
3s/4s 1500/2500 mAh Lipo (8 pieces of Lipo will fit!)
4 x 9 grams Servo
4ch or more Radio
Any FC - GPS and FPV system
Action Cameras like Gopro - Insta360 Go2 - Square Cameras and more...

When you purchase the Beta Version you will get a special invite link for the Telegram Beta Team Group. Contribute to model development, and get lifetime updates by joining the Beta Team.

Discover Build Series: youtube.com/playlist?list=PLnnQfoWAd84o_cxpkXTEET7INKjIkwxXI

Preparing FPV Hatch for Craycle Discover! #caddxvista #caddx #djifpv #crayclediscover #fpvsystem

Craycle 2023-10-15 | The Craycle Discover is the most functional model we made! We have developed an FPV Platform that can be used in different projects for many purposes, especially cinematic shots.

Craycle Discover STL files: bit.ly/discoverstl

-- Key Features --
Modular Electronic Platform
Free Electronic Plate Options are Available
Quick-Release Swaphable Action Camera Holder
Quick-Release Detachable Wings
Wingtip and Backlights for Night Flights
Optimized Cooling Vents Area
Swaphable FPV Hatch
Huge Service Hatches
Huge Interior Volume
High Safety for Action and FPV Cameras
High Battery Carrying Capacity
Common Craycle Cura Profile
180x180x180 mm Minimum Printer Size

General Specs
Length: 575 mm
Wingspan: 1200 mm
Print Weight: 607 grams
Flying Weight: 1100 grams
Wing Area: 18.7 dm2
Wing Loading: -
Airfoil : E205 (10.48%)
180x180x180 mm Minimum Printer Size

Recommended Electronics
Emax XA2212 1400KV Brushless Motor
30/40A ESC
8"/9"/10" Propeller
3s/4s 1500/2500 mAh Lipo (8 pieces of Lipo will fit!)
4 x 9 grams Servo
4ch or more Radio
Any FC - GPS and FPV system
Action Cameras like Gopro - Insta360 Go2 - Square Cameras and more...

When you purchase the Beta Version you will get a special invite link for the Telegram Beta Team Group. Contribute to model development, and get lifetime updates by joining the Beta Team.

Discover Build Series: youtube.com/playlist?list=PLnnQfoWAd84o_cxpkXTEET7INKjIkwxXI

Craycle Discover Sponsored By @speedybee. #speedybee #f405wing #rcplane #flightcontroller #djifpv

Craycle 2023-10-12 | The Craycle Discover is the most functional model we made! We have developed an FPV Platform that can be used in different projects for many purposes, especially cinematic shots.

Craycle Discover STL files: bit.ly/discoverstl

-- Key Features --
Modular Electronic Platform
Free Electronic Plate Options are Available
Quick-Release Swaphable Action Camera Holder
Quick-Release Detachable Wings
Wingtip and Backlights for Night Flights
Optimized Cooling Vents Area
Swaphable FPV Hatch
Huge Service Hatches
Huge Interior Volume
High Safety for Action and FPV Cameras
High Battery Carrying Capacity
Common Craycle Cura Profile
180x180x180 mm Minimum Printer Size

General Specs
Length: 575 mm
Wingspan: 1200 mm
Print Weight: 607 grams
Flying Weight: 1100 grams
Wing Area: 18.7 dm2
Wing Loading: -
Airfoil : E205 (10.48%)
180x180x180 mm Minimum Printer Size

Recommended Electronics
Emax XA2212 1400KV Brushless Motor
30/40A ESC
8"/9"/10" Propeller
3s/4s 1500/2500 mAh Lipo (8 pieces of Lipo will fit!)
4 x 9 grams Servo
4ch or more Radio
Any FC - GPS and FPV system
Action Cameras like Gopro - Insta360 Go2 - Square Cameras and more...

When you purchase the Beta Version you will get a special invite link for the Telegram Beta Team Group. Contribute to model development, and get lifetime updates by joining the Beta Team.

Discover Build Series: youtube.com/playlist?list=PLnnQfoWAd84o_cxpkXTEET7INKjIkwxXI

Discover Swappable Nose provides excellent cooling for the FPV system and Action Camera. #fpvsystem

Craycle 2023-10-10 | The Craycle Discover is the most functional model we made! We have developed an FPV Platform that can be used in different projects for many purposes, especially cinematic shots.

Craycle Discover STL files: bit.ly/discoverstl

-- Key Features --
Modular Electronic Platform
Free Electronic Plate Options are Available
Quick-Release Swaphable Action Camera Holder
Quick-Release Detachable Wings
Wingtip and Backlights for Night Flights
Optimized Cooling Vents Area
Swaphable FPV Hatch
Huge Service Hatches
Huge Interior Volume
High Safety for Action and FPV Cameras
High Battery Carrying Capacity
Common Craycle Cura Profile
180x180x180 mm Minimum Printer Size

General Specs
Length: 575 mm
Wingspan: 1200 mm
Print Weight: 607 grams
Flying Weight: 1100 grams
Wing Area: 18.7 dm2
Wing Loading: -
Airfoil : E205 (10.48%)
180x180x180 mm Minimum Printer Size

Recommended Electronics
Emax XA2212 1400KV Brushless Motor
30/40A ESC
8"/9"/10" Propeller
3s/4s 1500/2500 mAh Lipo (8 pieces of Lipo will fit!)
4 x 9 grams Servo
4ch or more Radio
Any FC - GPS and FPV system
Action Cameras like Gopro - Insta360 Go2 - Square Cameras and more...

When you purchase the Beta Version you will get a special invite link for the Telegram Beta Team Group. Contribute to model development, and get lifetime updates by joining the Beta Team.

Discover Build Series: youtube.com/playlist?list=PLnnQfoWAd84o_cxpkXTEET7INKjIkwxXI

Developed a new Wing Lock system for Craycle Discover. #craycledsicover #planeprint #rcplane

Craycle 2023-10-08 | The Craycle Discover is the most functional model we made! We have developed an FPV Platform that can be used in different projects for many purposes, especially cinematic shots.

Craycle Discover STL files: bit.ly/discoverstl

-- Key Features --
Modular Electronic Platform
Free Electronic Plate Options are Available
Quick-Release Swaphable Action Camera Holder
Quick-Release Detachable Wings
Wingtip and Backlights for Night Flights
Optimized Cooling Vents Area
Swaphable FPV Hatch
Huge Service Hatches
Huge Interior Volume
High Safety for Action and FPV Cameras
High Battery Carrying Capacity
Common Craycle Cura Profile
180x180x180 mm Minimum Printer Size

General Specs
Length: 575 mm
Wingspan: 1200 mm
Print Weight: 607 grams
Flying Weight: 1100 grams
Wing Area: 18.7 dm2
Wing Loading: -
Airfoil : E205 (10.48%)
180x180x180 mm Minimum Printer Size

Recommended Electronics
Emax XA2212 1400KV Brushless Motor
30/40A ESC
8"/9"/10" Propeller
3s/4s 1500/2500 mAh Lipo (8 pieces of Lipo will fit!)
4 x 9 grams Servo
4ch or more Radio
Any FC - GPS and FPV system
Action Cameras like Gopro - Insta360 Go2 - Square Cameras and more...

When you purchase the Beta Version you will get a special invite link for the Telegram Beta Team Group. Contribute to model development, and get lifetime updates by joining the Beta Team.

Discover Build Series: youtube.com/playlist?list=PLnnQfoWAd84o_cxpkXTEET7INKjIkwxXI

The next step is assembling the fuselage! #3dprinted #crayclediscover #rcplane

Craycle 2023-10-07 | The Craycle Discover is the most functional model we made! We have developed an FPV Platform that can be used in different projects for many purposes, especially cinematic shots.

Aerial Shots from Insta360 Go2.

Craycle Discover STL files: bit.ly/discoverstl

-- Key Features --
Modular Electronic Platform
Free Electronic Plate Options are Available
Quick-Release Swaphable Action Camera Holder
Quick-Release Detachable Wings
Wingtip and Backlights for Night Flights
Optimized Cooling Vents Area
Swaphable FPV Hatch
Huge Service Hatches
Huge Interior Volume
High Safety for Action and FPV Cameras
High Battery Carrying Capacity
Common Craycle Cura Profile
180x180x180 mm Minimum Printer Size

General Specs
Length: 575 mm
Wingspan: 1200 mm
Print Weight: 607 grams
Flying Weight: 1100 grams
Wing Area: 18.7 dm2
Wing Loading: -
Airfoil : E205 (10.48%)
180x180x180 mm Minimum Printer Size

Recommended Electronics
Emax XA2212 1400KV Brushless Motor
30/40A ESC
8"/9"/10" Propeller
3s/4s 1500/2500 mAh Lipo (8 pieces of Lipo will fit!)
4 x 9 grams Servo
4ch or more Radio
Any FC - GPS and FPV system
Action Cameras like Gopro - Insta360 Go2 - Square Cameras and more...

When you purchase the Beta Version you will get a special invite link for the Telegram Beta Team Group. Contribute to model development, and get lifetime updates by joining the Beta Team.

Discover Build Series: youtube.com/playlist?list=PLnnQfoWAd84o_cxpkXTEET7INKjIkwxXI

#crayclediscover #3dprinted #rcplane

Craycle Discover Printed Kit Unboxing.

Craycle 2023-09-14 | The Craycle Discover is the most functional model we made! We have developed an FPV Platform that can be used in different projects for many purposes, especially cinematic shots.

Aerial Shots from Insta360 Go2.

Craycle Discover STL files: bit.ly/discoverstl

-- Key Features --
Modular Electronic Platform
Free Electronic Plate Options are Available
Quick-Release Swaphable Action Camera Holder
Quick-Release Detachable Wings
Wingtip and Backlights for Night Flights
Optimized Cooling Vents Area
Swaphable FPV Hatch
Huge Service Hatches
Huge Interior Volume
High Safety for Action and FPV Cameras
High Battery Carrying Capacity
Common Craycle Cura Profile
180x180x180 mm Minimum Printer Size

General Specs
Length: 575 mm
Wingspan: 1200 mm
Print Weight: 607 grams
Flying Weight: 1100 grams
Wing Area: 18.7 dm2
Wing Loading: -
Airfoil : E205 (10.48%)
180x180x180 mm Minimum Printer Size

Recommended Electronics
Emax XA2212 1400KV Brushless Motor
30/40A ESC
8"/9"/10" Propeller
3s/4s 1500/2500 mAh Lipo (8 pieces of Lipo will fit!)
4 x 9 grams Servo
4ch or more Radio
Any FC - GPS and FPV system
Action Cameras like Gopro - Insta360 Go2 - Square Cameras and more...

When you purchase the Beta Version you will get a special invite link for the Telegram Beta Team Group. Contribute to model development, and get lifetime updates by joining the Beta Team.

Discover Build Series: youtube.com/playlist?list=PLnnQfoWAd84o_cxpkXTEET7INKjIkwxXI

#crayclediscover #3dprinted #rcplane

Drive LED Lamp Using an RC Servo Circuit!

Craycle 2023-08-11 | In this video, we drive 3mm LED lamps using 9 grams RC servo circuit. The full video is available on Channel: bit.ly/channel_sub

We tried to make this video as simple as possible. We are not experts in electronics, we only share what we know. For this reason, you can correct our mistakes in the comments section. We will make the necessary updates immediately.

Craycle Discover: bit.ly/discoverstl

Thank you for your watching.
Craycle Team.
www.craycle.com

Drive LED Lamp Using an RC Servo Circuit!

Craycle 2023-08-06 | In this video, we drive 3mm LED lamps using 9 grams RC servo circuit.

LED Resistor Calculator we used in the video ( 03:15 ): bit.ly/ledresistorcalculator

Our Craycle Discover model has backlights and wing lights for night flights. We use 3mm led lamps for lighting. We need 3V electricity to drive these lamps, but RC systems do not have 3V outputs. We also want to turn the lights off and on via the remote. To achieve this, we will use the circuits of 9-gram analog servos. You can use your broken or worn servos for this job.

Craycle Discover: bit.ly/discoverstl

Sections:
00:00 - Intro
00:05 - Removing Servo Circuit
02:40 - Preparing Circuit
04:58 - Assembling LED Lamps
07:14 - Soldering LEDs
10:30 - Testing

We tried to make this video as simple as possible. We are not experts in electronics, we only share what we know. For this reason, you can correct our mistakes in the comments section. We will make the necessary updates immediately.

Our aim is that people who do not have electronic knowledge can easily prepare this circuit. If you think the video is useful, please share it with your friends and talk to us in the comment section. In this way, the video reaches more people.

You can buy RC led driver instead of doing this, but they usually give 5V output, so you will need this video anyway. Also, these drivers are not common and easy to access. When you learn to drive LEDs using a servo circuit, you can use this circuit for different purposes. The circuit provides electricity bidirectionally and is adjustable, so you can use the servo in special projects such as mini tanks, boats, and cars without removing the servo motor.

Thank you for your watching.
Craycle Team.
www.craycle.com

SpeedyBee F405 Wing, Gps Module and Runcam FPV System Unboxing.

Craycle 2023-07-09 | Hello everyone,

These are SpeedyBee F405 Wing, Compatible GPS, and a Runcam Digital FPV system.

They sent us these beautiful products so we can test them on Craycle Discover. We will do test flights soon and share them with you.

I also worked out a custom holder for this flight controller. For now, I want to show the box contents and their impressive product quality.

Thanks to SpeedyBee

#flightcontroller #f405wing #crayclediscover

Insta360 Go2 Shots | Craycle Discover Beta V1

Craycle 2023-06-18 | The most functional model we made! We have developed an FPV Platform that can be used in different projects for many purposes, especially cinematic shots.

Aerial Shots from Insta360 Go2.

Download updated version STL files: bit.ly/discoverstl

-- Key Features --
Modular Electronic Platform
Free Electronic Plate Options are Available
Quick-Release Swaphable Action Camera Holder
Quick-Release Detachable Wings
Wingtip and Backlights for Night Flights
Optimized Cooling Vents Area
Swaphable FPV Hatch
Huge Service Hatches
Huge Interior Volume
High Safety for Action and FPV Cameras
High Battery Carrying Capacity
Common Craycle Cura Profile
180x180x180 mm Minimum Printer Size

General Specs
Length: 575 mm
Wingspan: 1200 mm
Print Weight: 607 grams
Flying Weight: 1100 grams
Wing Area: 18.7 dm2
Wing Loading: -
Airfoil : E205 (10.48%)
180x180x180 mm Minimum Printer Size

Recommended Electronics
Emax XA2212 1400KV Brushless Motor
30/40A ESC
8"/9"/10" Propeller
3s/4s 1500/2500 mAh Lipo (8 pieces of Lipo will fit!)
4 x 9 grams Servo
4ch or more Radio
Any FC - GPS and FPV system
Action Cameras like Gopro - Insta360 Go2 - Square Cameras and more...

When you purchase the Beta Version you will get a special invite link for the Telegram Beta Team Group. Contribute to model development, and get lifetime updates by joining the Beta Team.

Discover Build Series: youtube.com/playlist?list=PLnnQfoWAd84o_cxpkXTEET7INKjIkwxXI

#crayclediscover #3dprinted #rcplane

Discover Beta New Nose Design!

Craycle 2023-06-12 | It was really hard to take off the Nose Part outside on the flight day. Discover Nose had 6 little screws to release the nose part to reach the battery house. Now we made it a quick-release just like Camera Holders.

Download updated version STL files: bit.ly/discoverstl

-- Key Features --
Modular Electronic Platform
Free Electronic Plate Options are Available
Quick-Release Swaphable Action Camera Holder
Quick-Release Detachable Wings
Wingtip and Backlights for Night Flights
Optimized Cooling Vents Area
Swaphable FPV Hatch
Huge Service Hatches
Huge Interior Volume
High Safety for Action and FPV Cameras
High Battery Carrying Capacity
Common Craycle Cura Profile
180x180x180 mm Minimum Printer Size

General Specs
Length: 575 mm
Wingspan: 1200 mm
Print Weight: 607 grams
Flying Weight: 1100 grams
Wing Area: 18.7 dm2
Wing Loading: -
Airfoil : E205 (10.48%)
180x180x180 mm Minimum Printer Size

Recommended Electronics
Emax XA2212 1400KV Brushless Motor
30/40A ESC
8"/9"/10" Propeller
3s/4s 1500/2500 mAh Lipo (8 pieces of Lipo will fit!)
4 x 9 grams Servo
4ch or more Radio
Any FC - GPS and FPV system
Action Cameras like Gopro - Insta360 Go2 - Square Cameras and more...

When you purchase the Beta Version you will get a special invite link for the Telegram Beta Team Group. Contribute to model development, and get lifetime updates by joining the Beta Team.

Discover Build Series: youtube.com/playlist?list=PLnnQfoWAd84o_cxpkXTEET7INKjIkwxXI

#crayclediscover #3dprinted #rcplane

Discover Beta V1 Flight

Craycle 2023-06-07 | The most functional model we made! We have developed an FPV Platform that can be used in different projects for many purposes, especially cinematic shots.

Aerial Shots from Insta360 Go2.

Download updated version STL files: bit.ly/discoverstl

-- Key Features --
Modular Electronic Platform
Free Electronic Plate Options are Available
Quick-Release Swaphable Action Camera Holder
Quick-Release Detachable Wings
Wingtip and Backlights for Night Flights
Optimized Cooling Vents Area
Swaphable FPV Hatch
Huge Service Hatches
Huge Interior Volume
High Safety for Action and FPV Cameras
High Battery Carrying Capacity
Common Craycle Cura Profile
180x180x180 mm Minimum Printer Size

General Specs
Length: 575 mm
Wingspan: 1200 mm
Print Weight: 607 grams
Flying Weight: 1100 grams
Wing Area: 18.7 dm2
Wing Loading: -
Airfoil : E205 (10.48%)
180x180x180 mm Minimum Printer Size

Recommended Electronics
Emax XA2212 1400KV Brushless Motor
30/40A ESC
8"/9"/10" Propeller
3s/4s 1500/2500 mAh Lipo (8 pieces of Lipo will fit!)
4 x 9 grams Servo
4ch or more Radio
Any FC - GPS and FPV system
Action Cameras like Gopro - Insta360 Go2 - Square Cameras and more...

When you purchase the Beta Version you will get a special invite link for the Telegram Beta Team Group. Contribute to model development, and get lifetime updates by joining the Beta Team.

Discover Build Series: youtube.com/playlist?list=PLnnQfoWAd84o_cxpkXTEET7INKjIkwxXI

#crayclediscover #3dprinted #rcplane

Cinematic FPV Long Range Platform | Discover Beta V1

Craycle 2023-06-04 | The Craycle Discover is the most functional model we made! We have developed an FPV Platform that can be used in different projects for many purposes, especially cinematic shots.

Aerial Shots from Insta360 Go2.

Craycle Discover STL files: bit.ly/discoverstl

-- Key Features --
Modular Electronic Platform
Free Electronic Plate Options are Available
Quick-Release Swaphable Action Camera Holder
Quick-Release Detachable Wings
Wingtip and Backlights for Night Flights
Optimized Cooling Vents Area
Swaphable FPV Hatch
Huge Service Hatches
Huge Interior Volume
High Safety for Action and FPV Cameras
High Battery Carrying Capacity
Common Craycle Cura Profile
180x180x180 mm Minimum Printer Size

General Specs
Length: 575 mm
Wingspan: 1200 mm
Print Weight: 607 grams
Flying Weight: 1100 grams
Wing Area: 18.7 dm2
Wing Loading: -
Airfoil : E205 (10.48%)
180x180x180 mm Minimum Printer Size

Recommended Electronics
Emax XA2212 1400KV Brushless Motor
30/40A ESC
8"/9"/10" Propeller
3s/4s 1500/2500 mAh Lipo (8 pieces of Lipo will fit!)
4 x 9 grams Servo
4ch or more Radio
Any FC - GPS and FPV system
Action Cameras like Gopro - Insta360 Go2 - Square Cameras and more...

When you purchase the Beta Version you will get a special invite link for the Telegram Beta Team Group. Contribute to model development, and get lifetime updates by joining the Beta Team.

Discover Build Series: youtube.com/playlist?list=PLnnQfoWAd84o_cxpkXTEET7INKjIkwxXI

#crayclediscover #3dprinted #rcplane

Craycle Discover Beta V1 Flight Coming Soon...

Craycle 2023-06-02 | Full flight video coming soon for Discover Beta V1...

More information about the Craycle Discover: craycle.com/product/discover-1200-mm-fpv-rc-plane-stl-file

#crayclediscover #3dprinted #rcplane

Craycle Discover Beta Building Part 11

Craycle 2023-05-27 | Discover the FC Mount Flex option to protect FC from vibrations. You can use this plate for any electronic that you need to apart from the motor vibrations as much as possible.

More information about the Craycle Discover: craycle.com/product/discover-1200-mm-fpv-rc-plane-stl-file

#crayclediscover #3dprinted #rcplane

Craycle Discover Beta Building Part 10

Craycle 2023-05-24 | Installing Back Light parts into its place... We will share installing the LED light soon...

More information about the Craycle Discover: craycle.com/product/discover-1200-mm-fpv-rc-plane-stl-file

#crayclediscover #3dprinted #rcplane

Craycle Discover Beta Building Part 9

Craycle 2023-05-21 | Assembling Craycle Landing Gear Set...

More information about the Craycle Discover: craycle.com/product/discover-1200-mm-fpv-rc-plane-stl-file

#crayclediscover #3dprinted #rcplane

Craycle Discover Beta Building Part 8

Craycle 2023-05-20 | Installing electronics of Discover. Check that out how easy to install!

More information about the Craycle Discover: craycle.com/product/discover-1200-mm-fpv-rc-plane-stl-file

#crayclediscover #3dprinted #rcplane

Craycle Discover Beta Building Part 7

Craycle 2023-05-18 | Craycle new quick-release Wing Lock System! We are preparing Discover Wings in this ep.

More information about the Craycle Discover: craycle.com/product/discover-1200-mm-fpv-rc-plane-stl-file

#crayclediscover #3dprinted #rcplane

Craycle Discover Beta Building Part 6

Craycle 2023-05-15 | 3D Printed Mesh Parts and Nose Mounting...

More information about the Craycle Discover: craycle.com/product/discover-1200-mm-fpv-rc-plane-stl-file

#crayclediscover #3dprinted #rcplane

Craycle Discover Beta Building Part 5

Craycle 2023-05-12 | Preparing Service Hatches and its fully 3D printed spring locks.

More information about the Craycle Discover: craycle.com/product/discover-1200-mm-fpv-rc-plane-stl-file

#crayclediscover #3dprinted #planewings

Craycle Discover Beta Building Part 4

Craycle 2023-05-09 | Installing the Aileron and Elevator hinges and control horns.

More information about the Craycle Discover: craycle.com/product/discover-1200-mm-fpv-rc-plane-stl-file

#crayclediscover #3dprinted #planewings

Craycle Discover Beta Building Part 3

Craycle 2023-05-06 | Installing the Aileron servos and building the wings.

More information about the Craycle Discover: craycle.com/product/discover-1200-mm-fpv-rc-plane-stl-file

#crayclediscover #3dprinted #planewings

Craycle Discover Beta Building Part 2

Craycle 2023-05-03 | Preparing Electronics for Craycle Discover! Follow @craycle to see the next videos.

All FPV hatch options are available for free for the Beta
Team Members!

More information about the Craycle Discover: craycle.com/product/discover-1200-mm-fpv-rc-plane-stl-file

#crayclediscover #3dprinted #rcplane

Craycle Discover Beta Building Part 1

Craycle 2023-04-30 | May 1 is the last for Beta Discount. Join the Beta Team by purchasing the Beta version and contributing to the model development!

More information about the Craycle Discover: craycle.com/product/discover-1200-mm-fpv-rc-plane-stl-file

Follow @craycle to see the next videos.

#crayclediscover #fpvdrone #uav

Discover Beta Electronics Part 2

Craycle 2023-04-28 | Preparing Electronics for Craycle Discover! Follow @craycle to see the next videos. Support us to make it possible that we can continue to work for you!

More information about the Craycle Discover: craycle.com/product/discover-1200-mm-fpv-rc-plane-stl-file

Don't miss the Beta Version Special Price!

#crayclediscover #fpvdrone #uav

Discover Beta Electronics Part 1

Craycle 2023-04-25 | Preparing Electronics for Craycle Discover! Follow @craycle to see the next videos. Support us to make it possible that we can continue to work for you!

More information about the Craycle Discover: craycle.com/product/discover-1200-mm-fpv-rc-plane-stl-file

#crayclediscover #fpvdrone #uav

Craycle Discover Beta Released!

Craycle 2023-04-23 | How does it look? Discover Beta Build videos also coming soon part by part! #crayclediscover #rcuav #rcplanes #dji #gopro

3D Printed RC Plane Ranger V2 Full Build Part 4

Craycle 2023-04-20 | Printed Kits shipping worldwide! Just add an item to the cart and see your shipping cost on the cart page! Go to the store: craycle.com/store

#rcplane #fpvplane #3dprinted

3D Printed RC Plane Ranger V2 Full Build Part 3

Craycle 2023-04-15 | Ranger V2 can be your first RC Plane. We develop this model for beginners! You can crash the model doesn't matter, Ranger V2 protects all electronics in a safe. You can buy ARF kit (Without Electronics) or print again and Start Over to Enjoy!

Find out more details on craycle.com

#rcplane #fpvplane #3dprinted

3D Printed RC Plane Ranger V2 Full Build Part 2

Craycle 2023-04-11 | Our printed kits are now much more affordable! Our ARF kits start from 17.40 USD, our PNF kits from 45.90 USD...

Ranger V2 Full Build

Craycle 2023-03-31 | The Ranger V2 Full Build video is on Youtube! With the release of our new model Discover, we will shoot build videos of our other models. We moved to a new location this summer for plenty of flying and making videos. We are very sorry for this shortcoming about the build videos and our models will not be short of video in the future. We've done the poll before, the first video will be for Crow Racer.

You can support our effort by subscribing to our Youtube channel and liking and commenting on our videos...

#fullbuild #rangerv2 #craycle

Filament Dry Box Build

Craycle 2022-11-29 | We make Filament Dry Box for our production. We wanted to share this process with you. We also designed a box for Slika Gel, it's available now.

We purchased the ANYBOX V2 design while making the Dry Box. Marian has done a great job here. He provided detailed building manuals and parts lists. This is not a sponsorship, we want to support him for his good work.

Purchased Dry Box parts for the 6pcs Filament:
•1 pc 50l air-tight box
•24 pcs Ball bearings 608
•1 m Threaded rod M8*
•12 pcs Nut M8 DIN934*
•1-6m PTFE tube OD4 ID3*
•1 pc Silica gel bag*
•4 pcs Cylinderhead screw M3x14 DIN912*
•4 pcs Nut M3 DIN934*

Amazon links for all these materials: bit.ly/anyboxbom
AnyBox V2 STL: bit.ly/anyboxstl
Marian's other models: 3d-print-files.com/shop-en

SlicaBox STL: bit.ly/slicaboxstl
Our other models: craycle.com/store

Join to the Craycle Community in Facebook: bit.ly/craftergroup
Follow Instagram to be updated: bit.ly/craycleinstagram
Subscribe to the Youtube Channel: bit.ly/channel_sub

#drybox #filamentbox #diy

3D Printed Led Arm Build!

Craycle 2022-11-10 | Hello again :D This time I am here with a different product. I just improved the Led Arm design I developed for my desk when I founded Craycle. I have been using this design for 2 years in my workbench and desk. The first prototype is still working 2 years later but released version is quite better after long use.

You have Single and Twin Led Bar options.
You can use the Single Led Bar to illuminate your desk or as a sconce for your bed. The biggest advantage is that it works perfectly with 12V USB Converter up to 500 mm Led Bar. In this way, the Led Bar works with anything you find a USB output. So you can get power from PC, Monitor, Modem and more device whic you can find a USB output.

Led Arm clings to anywhere 18mm thick. This is the plate thickness of almost all furniture. If you wish, you can fix it to many places on the Wall Mount and make your Led Arm portable.

Twin Led bar, on the other hand, is mostly for professional and hobby purposes. It illuminates more and does not take up space on your desk. You can fix it wherever you want. Twin Bar will need more power but you can find many power supply in affordable price in the market. You can use max 1000 mm Led bar but I would recommend use a few 500 mm if your desk is long. You can use smart LED or RGB Remote Controllable one to enjoy it your LED Arm in your workbench.

We wish every individual in the Craycle Community had this design. For this reason, the Led Bar will be sent free of charge to anyone who owns Craycle Planes. Just send us an e-mail.

Check PDF for electronic part list and guide: bit.ly/ledarmpdf

Check Blog for more information: bit.ly/ledarmblog

STL Files: bit.ly/3hoqVXD

Thank you for whatching and welcome to the Craycle Community!

Join to the Crafter Group on Facebook: bit.ly/craftergroup
Follow Instagram to be updated: bit.ly/craycleinstagram
Subscribe link: bit.ly/channel_sub

#dprinted #3dprinting #ledbar

Craycle FPV Ranger V2 Full Build | Free STL / Printed Kit

Craycle 2022-10-31 | We are building new Ranger V2 Sports Version from the Printed Kit. Ranger V2 just released and STL files still available for free like V1. Ranger V2 now has an FPV Sports Version so you can make your first 4ch FPV Sport plane in affordable price.

Free and Sports Versions are the same! The only difference is that there are no FPV canopy and 4ch wing options in the free version.

With this model, we aim to reach people who have just started making 3D Printed Model Airplanes and who already have a 3D printer. You don't need to have model airplane building experience. By following the simple steps in the video, you can build the model and experience your first flight right away.

Enjoy with your new Ranger V2!

Sections:
00:00 - Intro
00:06 - Unboxing
00:40 - Fixing Craft Mat
01:09 - Gluing Fuselage
03:00 - Preparing Servos
03:45 - Gluing Wings
04:34 - Preparing Tail Servos
05:53 - Installing Electronics
06:50 - Painting
07:07 - Details
07:32 - Flight

Free Version STL File: bit.ly/rangerv2
FPV Sports Version STL File: bit.ly/rangerv2sport
ARF Printed Kit: bit.ly/rangerv2arf
PNF Printed Kit: bit.ly/rangerv2pnf

PDF User Guide for printing settings, necessary equipments, Amazon links and more: bit.ly/rangerv2pdf

Blog Article for more information and all necessary links and videos: bit.ly/rangerv2blog

--- General Specs ---
Length : 575 mm
Wingspan : 800 mm
Print Weight : 311 grams
Flying Weight : 500-650 grams
Wing Area : 11.1 dm2
Wing Loading : 49.4 g/dm2
Airfoil : NACA 2412

--- Recommended Electronics ---
2205 2300Kv Brushless Motor
30A ESC
5″ Propeller
3s 1000-2500 mAh Lipo
9gram Servo
Transmitter and Receiver

Amazon links in PDF User Guide: bit.ly/rangerv2pdf

--- STL Download Included ---
STL Files.
Cura Profile.
Ready to print G-code files (G-codes needs min 180x180mm print area).
User Guide (Detailed for assembling and printing).
Tech support.

--- ARF Kit Included ---
3D Printed model parts
5040 propeller (2 or 3 blade)
Hardened steel landing gear and TPU wheels.
Lipo velcro belt
Pushrods
TPU hinges and Hinge Maker tool
Hardware (Screws, Mounts, Horns and etc.)
Some special gifts 😀

--- PNF Kit Included ---
3D Printed model parts
5040 propeller (2 or 3 blade)
2205 2300Kv Brushless Motor
30A ESC
4 pcs, 9g Plastic Gear Servo
Hardened steel landing gear and TPU wheels.
Lipo velcro belt
Pushrods
TPU hinges and Hinge Maker tool
Hardware (Screws, Mounts, Horns and etc.)
Some special gifts 😀

Join to the Craycle Community in Facebook: bit.ly/craftergroup
Follow Instagram to be updated: bit.ly/craycleinstagram
Subscribe to the Youtube Channel: bit.ly/channel_sub

#diyrc #3dprinting #djifpv

Craycle Ranger V2 | 3D Printed RC Plane Testing Process

Craycle 2022-09-24 | We are updating the Ranger Mini! Our model, which is free of charge, will soon be offered to you for free with its new look and many new features. We apply the improvements we made in Orca V2 to this model and make it printable with a common setting profile with other models.

Ranger V2 will be offered with 4ch Wing option and FPV Adition version. These two options will be available at low cost and the updated 3ch version will remain free.

As I mentioned in the video, I am starting to work for the FPV version by rearranging the motor position. Follow us...
Printed Kit: bit.ly/printed_kits

Other Models: craycle.com/#:~:text=MORE%20PRINTED%20KIT-,NEW,-PLANES

Printed Kits: craycle.com/product-category/printed-kits/?orderby=price-desc

Craycle Store: craycle.com/store

You can join "Craycle Crafter Group" on Facebook to check out to other people's prints and builds: bit.ly/craftergroup

Follow Us:
bit.ly/craycleinstagram
facebook.com/craycle
https://tr.pinterest.com/craycle/_cre...
behance.net/crayclehobby

Thanks for watching and your interest...

#3dprinting #rangerv2 #diyrcplane

Insta360 Go2 Holder Mounting on Ranger V2 Prototype

Craycle 2022-09-13 | Here is the Insta360 Go2 Holder mounting process for the new Ranger V2.

Download STL files: craycle.com/product/insta360-go-2-holder-stl

Due to the high demand of FPV Orca users, we made a holder for the Insta 360 Go2 Action camera. While the holder protects your camera, it will not cause inefficiency on the model at high speeds with its aerodynamic body design. In addition, we have developed this design that will allow the wind to pass through the camera in order to eliminate the heating problem of the camera. There is 3 different body and 2 different Gopro Style Mounting Bracket designs so that you can use them on your Racer Drones, RC Model Planes, Cars, Motorcycle Helmets and etc you will have.

It is also designed to be compatible with all GoPro mounting brackets with the Flex body (See product images). Now you can also connect this little camera wherever you use Gopro!

Files Included in the Download:
Insta360 Go2 Holder Flex
Insta360 Go2 Holder Horizon
Insta360 Go2 Holder Hatchet
Insta360 Go2 Protector Clips
Bolt-on Bracket for Flex Holder
Quick Release Bracket for Flex Holder
Rocket Engine
Ready to Print G-code

We have "Craycle Crafter Group" on Facebook. You can join us to check out to the other people's prints and builds: bit.ly/craftergroup

You can support us that we can make design new planes. Free models will be available too with your supports in the near future: www.craycle.com

Follow Us:
bit.ly/craycleinstagram
facebook.com/craycle
https://tr.pinterest.com/craycle/_cre...
behance.net/crayclehobby

Thanks for watching and your interest...

#3dprinting #djifpv #insta360

Ranger Mini Sketching in Procreate | 3D Printed RC Plane Design

Craycle 2021-08-05 | Free STL Download Link: craycle.com/product/rangermini-stl

Flight Video: bit.ly/ranger_maiden

PDF USER's GUIDE: bit.ly/ranger_guide

If you are a beginner so you can build a Ranger Mini and learn how to make and how to fly a RC model Plane. Ranger Mini is a 3ch RC trainer plane. Also you can fly as FPV as make modifications.

We have optimazed the Ranger Mini for normal PLA but if you can use the LW-PLA it’s going to be better.

General Specs
◾Length : 615 mm
◾Wingspan : 800 mm
◾Print Weight : 235 gram
◾Flying Weight : 450 gram
◾Wing Area : 12.04 dm2
◾Wing Loading : 37.5 g/dm2

Recommended Electronics:
◾2204 2300Kv Brushless Motor
◾20A ESC
◾5x3 - 5x2 Propeller
◾3-4s 800-1500 mAh Lipo
◾2 X 9gram Servo
◾Minimum 3ch Transmitter and Receiver
◾Any FPV System if you like.

You will need a printer which has a bed size at least 180x180x180

Ranger Mini has a big loading space, easy printing (support free and continuous) and quick assembling process. 35 hours printing time and 30-40 minute assembling time.

Check out to the PDF user's guide for the assembling, printing, technical details and more: bit.ly/ranger_guide

All you need to make this model is a CA glue, Ø8x275 mm carbon pipe and Ø1 mm push rods.

We have "Craycle Crafter Group" on Facebook. Our community can help you for any issue that you have. You can check out to the other people's prints and posts: bit.ly/craftergroup

If you like to support us, you can get our paid models. Therefore
we will keep designing new free models in the future.

Also you can join in our patrons: http://bit.ly/pat_sup

New developments on instagram: bit.ly/craycleinstagram

Youtube Channel: bit.ly/channel_sub

@craycle

Download included:
-STL Files.
-Cura Profile.
-User Guide (Detailed for assembling and printing).
-Settings Table

#3dprinting #sketching #rcplane

Ranger Mini | 3D Printed RC Plane - Free STL Files!

Craycle 2021-07-18 | STL Downlad Link: craycle.com/product/rangermini-stl

PDF USER's GUIDE: bit.ly/rangerminiblog

Ranger Mini 3D Printed RC trainer plane is the best coice if you are a beginner. You can download the stl files and easily start how to fly with a RC model Plane. Ranger Mini is a 3ch RC trainer plane so it’s fly slow and much stable. Also you can fly as FPV as make modifications.

PDF User Guide help you on Slicing, Printing and Assembling process in details. If you have any problem, We have "Craycle Crafter Group" on Facebook. Our community can help you for any issue that you have. Also you can check out to the other people's prints and posts: bit.ly/craftergroup

You will need a printer which has a bed size at least 180x180x180

Ranger Mini has a big loading space, easy printing (support free and continuous printing) and quick assembling process. 35 hours printing time and 30-40 minute assembling time.

All you need to make this model is a CA glue, Ø8x275 mm carbon pipe and Ø1 mm push rods.

If you like to support us, you can get our paid models. Therefore
we will keep designing new free models in the future.

Other Models: www.cracyle.com/store

Also you can join in our patrons: http://bit.ly/pat_sup

Youtube Channel: bit.ly/channel_sub

Follow us on instagram: bit.ly/craycleinstagram

twitter.com/craycle

facebook.com/craycle

https://tr.pinterest.com/craycle/_cre...

behance.net/crayclehobby

Thanks for watching...

#3dprinting #rcplane #rangermini

FPV ORCA Flight Video / Auto Takeoff!

Craycle 2021-06-20 | Build Video: bit.ly/fpvorcabuild

PDF User Guide for the electronic part list, model part list, printing guide, assembling guide, slicer settings and more : craycle.com/product/fpvorca-stl

Stl download link: craycle.com/product/fpvorca-stl

Download included:
-STL Files.
-Cura Profile.
-Ready to print G-code files
-User Guide (Detailed for assembling and printing).
-Tech support

You can support us that we can make design new planes. Free models will be available too with your supports in the near future. http://bit.ly/pat_sup

Follow us:
bit.ly/craycleinstagram
twitter.com/craycle
facebook.com/craycle
https://tr.pinterest.com/craycle/_cre...
behance.net/crayclehobby

This video recorded By our customer Ali ALPAY.

Thanks for watching...

#3dprinting #fpv #rcplane

FPV ORCA Build Trailer | 3D Printed RC Plane

Craycle 2021-06-17 | Build Video: bit.ly/fpvorcabuild
Flight Video: bit.ly/orcamaiden

PDF User Guide for the electronic part list, model part list, printing guide, assembling guide, slicer settings and more : craycle.com/product/fpvorca-stl

Stl download link: craycle.com/product/fpvorca-stl

Download included:
-STL Files.
-Cura Profile.
-Ready to print G-code files
-User Guide (Detailed for assembling and printing).
-Tech support

You can support us that we can make design new planes. Free models will be available too with your supports in the near future. http://bit.ly/pat_sup

Follow us:
bit.ly/craycleinstagram
twitter.com/craycle
facebook.com/craycle
https://tr.pinterest.com/craycle/_cre...
behance.net/crayclehobby

Thanks for watching...

#3dprinting #fpv #rcplane

Craycle FPV ORCA | 3D Printed RC Plane - Build

Craycle 2021-06-07 | STL download link: craycle.com/product/fpvorca-stl

Flight Video 1: bit.ly/orcamaiden
Flight Video 2: bit.ly/orcaautotakeoff

PDF User Guide for the electronic part list, model part list, printing guide, assembling guide, slicer settings and more : craycle.com/product/fpvorca-stl

Orca is optimized for normal PLA and PetG. It can fly long time with up to 2200 mAh battery. You can put your flight controller, GPS and telemetry module. Orca has a big loading space, easy to accessible electronics, easy to printing (support free) and quick assembling process.

With Normal PLA:
-200 gram print weight
-450-500 gram flight weight

Recommended Electronics:
◾2205 2300Kv Brushless Motor
- Amazon Link : amzn.to/3B2Pteq
◾30A ESC
- Amazon Link : amzn.to/34BFXD1
◾5x3 - 6x2 Propeller
- Amazon Link : 5x3 - amzn.to/3ou7XQc
6x3 - amzn.to/3ruqv4H
◾3-4s 1000-2200 mAh Lipo
- Amazon Link : amzn.to/3ruqv4H
◾2 X 9gram Servo
- Amazon Link : amzn.to/3J8OFaV
◾Minimum 3ch Transmitter and Receiver
- Amazon Link : amzn.to/3ourRuu
◾Any FPV System
- Amazon Link : amzn.to/34nhguk

Download included:
-STL Files.
-Cura Profile.
-Ready to print G-code files
-User Guide (Detailed for assembling and printing).
-Tech support

We have "Craycle Crafter Group" on Facebook. Our community can help you for any issue that you have. You can check out to the other people's prints and posts: bit.ly/craftergroup

You can support us that we can make design new planes. Free models will be available too with your supports in the near future. http://bit.ly/pat_sup

Follow us on instagram: bit.ly/craycleinstagram
twitter.com/craycle
facebook.com/craycle
https://tr.pinterest.com/craycle/_cre...
behance.net/crayclehobby

Thanks for watching and your interest...

#3dprinting #fpv #rcplane