The intertwined waves pattern in 3D printing MihaiDesigns 2026-09-21 | The intertwined waves pattern in 3D printing
3D Printer CRASH! Forgot to Remove the Old Print 😱 MihaiDesigns 2025-08-28 | Ever started a 3D print and totally forgot to clear the bed? Yeah, me too! Watch my printer smash into the old print and turn it into a plastic disaster. A quick reminder to always check your build plate! Share your own 3D printing fails in the comments! 🖨️💥 #3DPrinting #3DPrintFailProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Melting Nylon Through a 0.2mm Nozzle at 300°C! 😍 MihaiDesigns 2025-08-26 | Watch the captivating flow of nylon being purged through a tiny 0.2mm nozzle at 300°C! This 3D printing process is so satisfying to watch. What’s your favorite 3D printing moment? Drop it in the comments!Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Blue & White Bronto 3D Print on Bambu Lab X1C! 🦕💙 MihaiDesigns 2025-08-24 | This blue and white Bronto 3D printed on the Bambu Lab X1C is a stunner! 🦕💙 Crisp details and bold colors. Get the model here: makerworld.com/en/models/764176. #3DPrinting #BambuLab #3DPrintProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printing TINY Octopus Babies in ALL the Colors! 🐙✨ MihaiDesigns 2025-08-22 | I 3D printed a whole squad of adorable articulated octopuses in 5 vibrant colors! Watch these wiggly babies come to life straight off the print bed – no supports needed! 🐙🌈 Each one’s so cute, I can’t stop making baby sounds or saying “hello” in my squeakiest voice. 😄 Check out the model here: makerworld.com/en/models/1551397 and print your own! PLA, 0.2mm layer height, 5% infill – easy peasy! Show me your prints in the comments! 📸 #3DPrinting #CuteOctopus #MakerFunProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printed Sharks with a CHOMP! 🦈 Prime Tower Shark Gone Wild! MihaiDesigns 2025-08-21 | I 3D printed a whole school of these "friendly" articulated sharks in blue with sharp white teeth on my Bambu Lab X1 Carbon with AMS! 😁 They claim they’re all about community and equality, but that evil laugh tells a different story. Watch out for the Prime Tower Shark—my slicer decided to glue a tower to its tail, and now it’s the boss of the ocean! 🦈💥 Printed the awesome Bitey shark model from MakerWorld (link below). No supports needed, just a brim to keep those chompers in place. What’s the wildest 3D print fail you’ve had? Let me know in the comments! 👀Model Link: makerworld.com/en/models/1233947Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
No Inspiration? I 3D Printed Sneaky Crocodiles! 🐊 MihaiDesigns 2025-08-18 | Out of ideas? I 3D printed these awesome articulated crocodiles instead! 🐊 Green, white, and full of crocodile-y vibes, these guys are ready to chomp! Watch as Wally gets up close and delivers a tiny jump scare. 😜 Model link: makerworld.com/en/models/999201 Got inspiration for my next print? Drop it in the comments!Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Springy Giraffe Army Bouncing on 3D Printers! 🦒✨ MihaiDesigns 2025-08-17 | Watch these adorable springy giraffes take over my 3D printers! Their wobbly necks bounce with every print, creating the cutest chaos ever. 🦒💥 Printed using the Springy Cute Giraffe model – link below! What’s your favorite 3D print to make things shake? Let me know in the comments! 😎Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Oh, 3D Printing Supports Are SO Easy to Remove... Right? MihaiDesigns 2025-08-16 | Watch me wrestle with supports on this black and red 3D-printed rose decor. Spoiler: it takes FOREVER with pliers, but the final print is worth it. Jazz vibes keep it chill. 🌹😅Model link: makerworld.com/en/models/1021047-rose-decorProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Adorable 3D Printed Heart-Eyed Frogs! 🐸💖 ASMR & Close-Up Fun! MihaiDesigns 2025-08-16 | Check out these super cute articulated frogs I 3D printed on the Bambu Lab X1 Carbon! 🐸 Printed in pink with lilac heart-shaped eyes and back spots, these little guys are full of charm. Enjoy some satisfying ASMR as I reveal 9 of them, with a close-up of one saying, "Hi! I love you!" 💕 Get the model here: makerworld.com/en/models/764261-cute-articulated-frogProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printed Walter White Bust Takes a Tumble! 😆 No Glasses, No Problem? MihaiDesigns 2025-08-16 | Check out this epic Walter White bust 3D printed on my Bambu Lab X1 Carbon! I give Walter a little nudge, and whoops—he falls flat on his back! 😅 Printed using the 0.2mm layer, 2 walls, 8% rectilinear profile. Grab the model by FotisMint here: makerworld.com/en/models/1170338. What do you think of this Breaking Bad vibe? Drop a comment!Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printed Dragon Heart: Epic Valentine’s Day Gift! 🐉❤️ MihaiDesigns 2025-08-13 | Watch me bring this stunning "Heart of Dragon" 3D print to life! Printed in vibrant red with a sandy base, this heart-shaped dragon duo is perfect for Valentine’s Day or any dragon lover.Check out the model on MakerWorld: makerworld.com/en/models/1037010-heart-of-dragon. See how I remove the supports and reveal the final piece! #3DPrinting #DragonArtProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Baby Toothless Falls in LOVE! 🐉💖 3D Printed Valentine’s Day Edition MihaiDesigns 2025-08-12 | Watch these adorable multi-color Baby Toothless dragons steal the show! 🐉💕 Printed on the Bambu Lab 3D printer, each one has green eyes and a red heart tail, perfect for Valentine’s Day vibes! Join me as I reveal them one by one with a big "YES!" for love! 💖This is also Night Fury.Check out the model by PinkyWings: makerworld.com/en/models/1015151-night-fury-toothless-dragon-valentine-day-edition#profileId-995270Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts #nightfury
Thick Vase Mode FAIL: Turbine Vase Leaks & Plant Hack Disaster! 😅 MihaiDesigns 2025-08-10 | I 3D printed the Turbine Vase by Make My Vase in "thick vase mode" with a 0.8mm nozzle and bone-like PLA. Spoiler: it’s a leaky mess! 💦 Watch me try to save it with a fake IKEA plant and some serious elbow grease. Ta-daa... or not! 😂 Check out the model here: makerworld.com/en/models/1108587-the-turbine-vase-a-botany-chic-creation-decorProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printed Flexi Heart Dragons in Red & White! 🐉💖 MihaiDesigns 2025-08-10 | I 3D printed 5 adorable Flexi Heart Dragons by PinkyWings in vibrant red and white! These fully articulated, heart-themed dragons are super fun to play with and make the perfect gift. No supports needed for an easy print! Check out the model here: makerworld.com/en/models/1210726-flexi-heart-dragon. What do you think of these cute dragons? Let me know in the comments! 🐉✨Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Springy Giraffe Army Takes Over! 🦒✨ 3D Printing Madness! MihaiDesigns 2025-08-09 | Watch these adorable Springy Cute Giraffes come to life on my 3D printer! From the print bed to a whole herd of wobbly-necked giraffes, this model by ABZ Studio is pure fun. Check out the springy action and grab the model to print your own!Model Link: makerworld.com/en/models/946884#MakerWorldProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Epic Moonlight Santa String Art 3D Print Fail & Win! 🎅✨ MihaiDesigns 2025-08-07 | Watch me tackle the Moonlight Santa String Art by 3dprintbunny on my Bambu Lab P1P! A mid-print fail had me singing (badly) and restarting, but we got there! Check out the stunning result with Santa and his reindeer glowing under a light. Printed with PLA at 0.24mm layer height, no supports, and Arachne wall generator in Bambu Studio. Get the model here: https://than.gs/m/972262Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printed Huggable Heart Fidgets in Red, Blue & Pink! ❤️ ASMR MihaiDesigns 2025-08-07 | Check out these Huggable Heart fidgets 3D printed in red, blue, and a round black one that says "fam"! Paired with a white Heart Nest for a perfect fit. Articulated squares of different thicknesses make them super satisfying to play with. Full ASMR vibes, and I say "lovely" at the end! ❤️ Model link: makerworld.com/en/models/1024070-huggable-heartProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printing Stunning Orchid Planters: Lila & Purple Mix-Up! 🌸 MihaiDesigns 2025-08-05 | We’re back with another 3D printing adventure! This time, we’re peeling off two gorgeous orchid planters from the print bed – one in a soft lila and a bold, intense purple. My girlfriend’s obsession with these flower pots is real, and her favorite colors are stealing the show! 😍 Watch as we mix and match the pots and bases for a cool color swap and drop in a (totally fake) plant for some fun. Printed using the mirage · orchid planter model by h3li0: makerworld.com/en/models/1123316. Let us know what colors you’d print these in! #3DPrinting #OrchidPlanter #DIYProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printing Overload! Too Fast for the Camera? 😅 MihaiDesigns 2025-08-04 | Ever 3D print faster than you can film? That's me right now! Check out this mountain of 3D printed models piling up because I can't keep up with the camera. Stay awesome, makers! 🚀Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Unboxing & Printing with Sunlu Dry Box on Bambu P1P! (Older Video) MihaiDesigns 2025-08-04 | Join me in this older video as I unbox the Sunlu Dry Box with heating and put it to work with a Prusament spool that doesn’t fit in the AMS unit! I’m 3D printing PETG on the Bambu P1P and checking the dry box temperature, which hits a perfect 65°C. See how it performs!Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printing Saved My Shoes! 🥾 Designing Custom Shoelace Tips in Fusion 360 MihaiDesigns 2025-08-02 | My girlfriend washed my favorite creamy shoes and the shoelace tips vanished! 😅 No problem—I measured, designed custom tips in Fusion 360, sliced them, and 3D printed them in PETG. First try, perfect result! Watch how I brought my shoes back to life with 3D printing.Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Fresh Romanian Coffee Beans & My Cappuccino Moment! ☕ MihaiDesigns 2025-08-01 | Check out these awesome coffee beans from Yume Coffee, DropShot, and Opya in Romania! I’m showing off the bags and my Sage/Breville espresso machine, plus a perfect cappuccino to wrap it up. What’s your favorite espresso machine? If you’re in Romania, where do you get your coffee beans? Let me know in the comments! Cheers! ☕Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Filament Rewind Fiasco! 😱 Untangling the Mess & Breaking a Giraffe 🦒 MihaiDesigns 2025-08-01 | What happens when your filament rewind goes wrong? A giant pile of tangled PLA from my favorite Fillamentum spool! Watch me wrestle with the mess, accidentally snap another 3D printed giraffe, and get my Bambu X1C back to printing dragons. Pro tip: maybe stick to Bambu spools next time? 😂Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Another Giraffe Loses Its Head! 🦒💥 3D Printing Fails MihaiDesigns 2025-07-31 | These springy giraffes are adorable but SO fragile! 😅 Watch another one take a tumble and lose its head while wiggling on my 3D printer. Printed dozens, and they still break faster than I can keep up! 🖨️💥 Check out the model here: makerworld.com/en/models/946884Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
5-Color Mando & Baby Yoda Print 🚀 MihaiDesigns 2025-07-30 | 3D printing in 5 colors is AWESOME but creates a ton of waste! 😳 I printed this epic Mandalorian & Grogu figurine (remix by Encrust3d) on my Bambu Lab X1C with AMS, and get this: the waste for one print is the same as for FOUR! So, I’m gifting the extra 3 to my Star Wars fan friends! 🎁 Did you love the Mandalorian series? Let me know in the comments! 👇 Get the model here: makerworld.com/en/models/50650#mihaidesigns #3dprinting #mandalorian #babyyoda #bambulab #makerworldProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Epic Star Wars 3D Print: Dual Angle Sculpture Reveal! MihaiDesigns 2025-07-30 | Check out this epic Star Wars Dual Angle Sculpture by Elijah! Printed in black sparkle PLA, this 3D print shows a stunning scene of Star Wars characters from one angle and the iconic Star Wars logo from another. Perfect for any fan’s shelf! Download the model here: makerworld.com/en/models/1533965-star-wars-dual-angle-sculpture#profileId-1608905Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printed Thinking Statue with a Twist MihaiDesigns 2025-07-29 | Watch this mesmerizing 3D print of "Celestial Resonance - Beyond Sight" by Collecticraft come to life! A thought-provoking statue with no torso, printed in satin white with fuzzy skin texture. Enjoy the timelapse and ASMR of peeling it off the build plate and cleaning supports. Just sit back and say "hmmmm"!Model Link: makerworld.com/en/models/171355-celestial-resonance-beyond-sight#profileId-188168Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Scaling Up a STUNNING Orchid Planter! 🌸 3D Printed with Fuzzy Skin Magic MihaiDesigns 2025-07-28 | Watch me 3D print and scale up the gorgeous Mirage Orchid Planter by H3li0 for my girlfriend’s flowers! 🌿 We used dark brown and bright wood-textured PLA with a fuzzy skin base for that unique look. At the end, I swap the bowls and bases for a fun mix-and-match vibe – which combo do you prefer? Printed on my Bambu Lab printer for smooth results!Model link: makerworld.com/en/models/1123316-mirage-orchid-planterProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printing Walter White Bust - No Glasses, No Problem! 😎 MihaiDesigns 2025-07-27 | Check out this awesome Walter White bust by FotisMint, 3D printed on my Bambu Lab! Watch it come to life, from printing to peeling off supports. "Hello Walter, where are your glasses?" 😂 Get the model here: makerworld.com/en/models/1170338-walter-white-bustProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Sparkly Galaxy Violet Heart Pot 3D Printed for Her Collection! 💜🌌 MihaiDesigns 2025-07-26 | 3D printing the "Heart Flower Pot - Love Pot" by C3D again, this time in sparkly galaxy violet picked by my girlfriend! It’s perfect for her heart collection (now with violet and green vases). Watch the print, peel it off the build plate, and let me know: should we print a green pot to match? 😄 Model here: makerworld.com/en/models/414495-heart-flower-pot-love-pot#mihaidesigns #3Dprinting #HeartPot #DIY #MakerWorldProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printers Go HARD All Weekend! 🦒 Bouncing Giraffes Take Over! MihaiDesigns 2025-07-26 | Watch my 3D printers grind non-stop over the weekend, pumping out a squad of orange springy giraffes that just can’t stop nodding to the beat! 🎶 No voice, just pure printing action and energetic vibes. Check out the awesome springy giraffe model here: makerworld.com/en/models/946884Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Heart-Shaped Tissue Holder 3D Print: Perfect Valentine’s Day Gift! ❤️✨ MihaiDesigns 2025-07-25 | Watch me 3D print this adorable heart-shaped tissue holder by 3Dmanufactory.italy! It’s a quick print with a satisfying snap when assembling the two pieces. Perfect for Valentine’s Day or adding a cute touch to your table. Check out the ASMR build plate removal and the click of the pieces coming together! Download the model here: makerworld.com/en/models/1087430-heart-shaped-tissue-holderProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printing Mandalorian & Baby Yoda - No Supports! 😍 MihaiDesigns 2025-07-25 | 99%... and DONE! Watch the final moments of printing this epic Mandalorian and Grogu figurine with NO supports! 🚀 Thanks to Encrust3d’s remix on MakerWorld, this print came out clean on the Bambu Lab X1C with AMS. Check out the close-up details of Mando and Baby Yoda – do you love it as much as I do? 😍 Drop a comment and let me know! Get the model here: makerworld.com/en/models/50650#mihaidesigns #3dprinting #mandalorian #babyyoda #bambulab #makerworldProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printed Wavy Plant Support Saves My Girlfriend from a Life of Crime! 🌱😂 MihaiDesigns 2025-07-24 | My girlfriend’s flower rod thefts had to stop, so I 3D printed the Wavy Plant Support for Seedlings by J0hnny12 from MakerWorld to keep her out of jail! 🌸 Inserting it into the pot was a STRUGGLE, so I stacked SIX to the ceiling for laughs. 😅 I asked the orchid if it liked its new support, but when I touched the last flower, it fell—OOPS! 😲 Download the model here: makerworld.com/en/models/1567782✅ Stylish & functional design✅ Keeps plants upright (mostly)✅ Stops plant-related felonies 😂#mihaidesigns #3DPrinting #PlantSupport #MakerWorld #DIYGardeningProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
DIY Ring Light Chaos: 3D Print Fails, Storms, & a Swimming Pool Balcony! 😅 MihaiDesigns 2025-07-23 | What happens when you try to upgrade your 3D printing setup with new ring lights? Total chaos! 😜 From epic print fails on my Bambu printer to a stormy mess turning my balcony into a swimming pool, this DIY project is a wild ride. Cheap tripods, flickering lights, and a roof leak—yet somehow, we make it work! 😂 Watch the full struggle and let me know how you handle your 3D printing disasters in the comments!Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts #3DPrinting #DIYFails #3DPrintFail #MakerLife
EPIC 3D Print Reveal: ONE DAY LEFT! Can You Guess This Character? 👀 Multicolor Magic! MihaiDesigns 2025-07-22 | We’re almost done with our multicolor figurine print on the Bambu X1C! 🖨️ Just ONE day left, and it’s looking amazing. Can you guess who this character is from just the legs? 🤔 No spoilers! I’m also showing off the two AMS units with 5 vibrant PLA colors bringing this print to life. Model by Encrust3d: makerworld.com/en/models/50650. Drop your guesses in the comments, like, subscribe, and hit the bell for the big reveal tomorrow! #mihaidesigns #3DPrinting #BabyYoda #BambuLabProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Oops! 3D Printed a Green Heart Pot by Mistake, Then Nailed the Teal One! 💚➡️💙 MihaiDesigns 2025-07-21 | Watch me 3D print the "Heart Flower Pot - Love Pot" by C3D on my Bambu Lab P1S! Accidentally printed a green one first (oops!), then got the perfect teal to match my heart vase collection. Ends with a Ta-daa! 😄 Grab the model here: makerworld.com/en/models/414495-heart-flower-pot-love-potProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Mandalorian & Grogu 3D Print DRAMA: Printer Jam FIXED! 😅 Multicolor Magic Continues! MihaiDesigns 2025-07-21 | The multicolor Mandalorian & Grogu print hit a snag! 🖨️ The Bambu X1C got stuck, filament wouldn’t budge, and the sensor looked clean. The troubleshooting assistant pointed to a failing AMS slot, but it seemed fine. After reassembling, it magically worked! 🎉 No clue how, but we’re back on track with this epic print. Model by Encrust3d: makerworld.com/en/models/50650. Like, subscribe, and hit the bell for the final reveal! #mihaidesigns #3DPrinting #Mandalorian #BabyYoda #bambulab Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Mandalorian & Grogu 3D Print Update: AI Detects Filament Pileup! 😱 Halfway Done! MihaiDesigns 2025-07-20 | Day 2 of our multicolor Mandalorian & Grogu figurine print with the Bambu X1C! 🖨️ The AI paused the print due to a "filament pileup" – just a small one, no biggie! We cleared the bin, and we’re now halfway through this epic 3D print. Stay tuned for tomorrow’s update! 🚀 Model by Encrust3d: makerworld.com/en/models/50650. Like, subscribe, and hit the bell for more 3D printing fun! #mihaidesigns #3DPrinting #Mandalorian #BabyYoda #BambuLabProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printed Fidget Tracks: Tank-Like ASMR Fun! 🛠️ MihaiDesigns 2025-07-19 | Get ready for some satisfying ASMR as I 3D print and peel off these cool Fidget Tracks by L10design in vibrant green! 🟢 These tank-like tracks are a bit loose but super fun to play with—perfect for fidget lovers like me! Check out the model on MakerWorld: makerworld.com/en/models/1010339. Don’t miss the mesmerizing bed removal! 😍 Like, comment, and subscribe for more 3D printing adventures! #mihaidesigns #3DPrinting #FidgetToys #ASMR #MakerWorldProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printing a STUNNING Mandalorian & Grogu Figurine in MULTICOLOR! 🌟 Day 1 MihaiDesigns 2025-07-19 | Kicking off an epic multicolor 3D print of the Mandalorian & Grogu remix by Encrust3d! 🚀 Using the Bambu X1C with 2 AMS units and 5 vibrant PLA colors, this figurine is already looking flawless. Follow along for Day 1 of this exciting print journey – a few more days to go! 🎨✨ Check out the model here: makerworld.com/en/models/50650. Don’t forget to like, subscribe, and hit the bell for more 3D printing adventures! #mihaidesigns #3DPrinting #Mandalorian #BabyYoda #bambulab Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printing a Heart Flower Pot with Hmm Vibes! 💖🌱 MihaiDesigns 2025-07-17 | Watch me 3D print the adorable "Heart Flower Pot - Love Pot" by C3D from MakerWorld! From seeing the model to slicing, printing, and placing it with my heart-shaped vase collection, it’s all hmm vibes! 😄 Perfect for plant lovers and 3D printing fans. Get the model here: makerworld.com/en/models/414495-heart-flower-pot-love-potProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printed STAR WARS Flip Text is EPIC! 😱 Luke vs. Vader Duel! MihaiDesigns 2025-07-17 | Watch me 3D print this AWESOME Star Wars flip text model by Wantun! Found it online, sliced it in Bambu Studio, printed it on my Bambu Lab X1C in sleek black, and removed supports with some satisfying ASMR vibes. Then, I reveal the STAR WARS text and flip it to show Luke and Darth Vader dueling—complete with my lightsaber sound effects! ⚔️ May the Force be with you!Model: makerworld.com/en/models/1416561-star-wars-flip-text#mihaidesigns #3dprinting #starwars #bambulab #3dprintProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Filament Fiasco in the Bambu AMS! 😅 #3dprintingfails MihaiDesigns 2025-07-16 | Ever had a filament tangle so bad it looks like modern art? 🎨 In this video, I show you a wild mess in my Bambu AMS unit when it failed to rewind a non-Bambu spool. Spoiler: it’s not my favorite way to rewind filament! 😂 Let’s laugh through the frustration and share your worst 3D printing fails in the comments! 🖨️ #mihaidesigns #3DPrinting #BambuAMS #FilamentFailProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Bigger Teal Heart Vase 3D Print! 💙 Perfect for Her Collection! MihaiDesigns 2025-07-15 | Hey everyone! 🛠️ Back in the garage with a bigger version of the heart-shaped vase from C3D (makerworld.com/en/models/401409-heart-vase-love-vase#profileId-302943), printed on my Bambu Lab X1C with AMS in a stunning teal filament. This one’s a perfect addition to my girlfriend’s heart collection, joining the purple sparkles vase from last time! 💜💙 No pliers fails this time, just pure 3D printing vibes. 😎 Want to see more easy DIY and home decor projects? Like, subscribe, and drop a comment with what you’re printing!Model link: makerworld.com/en/models/401409-heart-vase-love-vase#profileId-302943Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printed Toothpick Launcher: Fun or Dangerous? 😱 MihaiDesigns 2025-07-15 | I 3D printed this awesome green toothpick launcher by "Its On My Mind" from MakerWorld! Watch it fire a toothpick straight into a cardboard box with a hilarious "DANGER" moment! 😂 It’s a super fun print-in-place design, but is it too risky for kids? Let me know what you think in the comments! 🦷🚀Get the model here: makerworld.com/en/models/1107433-toothpick-launcher-print-in-placeProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
Mass 3D Printing Madness! 🖨️ 7 Printers, Zero Fails, One TINY Box! 😅 MihaiDesigns 2025-07-14 | Epic 3D printing showdown with NO fails! Watch the Bambu Lab P1S, P1P, Prusa MK4S, Elegoo Neptune 3 Pro, A1 Mini, and TWO Bambu Lab X1Cs crank out tons of white models at lightning speed! ⚡ Then, I peel them off the build plates and try to stuff them all into a comically small box! 😂 Which printer’s your favorite? Let me know! #mihaidesigns #3DPrinting #BambuLab #Prusa #Elegoo #A1Mini #X1C #P1PProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
3D Printing a Springy Giraffe 🦒: Epic Fails to YEY Success! MihaiDesigns 2025-07-14 | Watch me battle to 3D print this adorable springy giraffe by ABZ Studio on my Bambu Lab X1C! 🦒 The neck kept BREAKING when removing supports—total fail moments! 😅 After two tries, I finally nailed it, and the springy neck is SO satisfying! Check out the full journey and that "YEY" moment when it all comes together! 🎉Model: Springy Cute Giraffe by ABZ Studio (makerworld.com/en/models/946884#profileId-913854) #mihaidesigns #3DPrinting #BambuLab #3DPrintFail #SpringyGiraffeProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
BlackMagic Speed Editor: My New Video Editing Game-Changer! 🎥✨ MihaiDesigns 2025-07-13 | Editing videos just got WAY faster! 🚀 In this video, I unbox and demo the BlackMagic Speed Editor, showing how its slick wheel makes scrolling through the DaVinci Resolve timeline a breeze. Say goodbye to tedious editing sessions! 🙌 Got a favorite editing tool? Drop it in the comments! 👇Projects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts #BlackMagicSpeedEditor #VideoEditing #DaVinciResolve #ContentCreation
3D Printing Chaos! 😅 Bambu Lab, Prusa & Elegoo Face Off (One Fails HARD!) MihaiDesigns 2025-07-13 | Watch 3 3D printers in action: Bambu Lab P1S, Prusa MK4S, and Elegoo Neptune 3 Pro battle it out to mass-produce a part! Spoiler: One printer totally flops with pieces flying off the bed, and we made it hilarious with the perfect song! 😂 Enjoy the chaos and let me know which printer you’re rooting for! #3DPrinting #BambuLab #Prusa #ElegooProjects and affiliate recommendations:Bambu Lab X1-CC 3D printer bit.ly/bambu-x1-ccmihaidesigns.comPatreon patreon.com/mihaidesignsInstagram: instagram.com/mihaidesignsTwitter: twitter.com/MihaiDesignsBuy me a coffee http://mihaid.com/coffee#mihaidesigns #shorts
