enots engineering
Fitting new front discs and pads to a VW UP
updated
setup gears, tool and test cut. then finish thread
** I set the 29 Deg angle the wrong side.The thread form was corrected when I took the finishing cuts using the cross slide 90 deg to the part.
visit the web site hemingwaykits.com/HK1308
see links below
Drillpro 8Pcs Blue Nano 2-12mm 4 Flutes Carbide End Mill Set https://ban.ggood.vip/13TXQ
6PCS 3 Flute 90 Degree Countersink Drill HSS https://ban.ggood.vip/13TXS
This jig is made from a kit by Hemming way kits (link to web site below)
hemingwaykits.com/HK1310
Drill bed and thumb screws
This jig is made from a kit by Hemming way kits (link to web site hemingwaykits.com/HK1310
This jig is made from a kit by Hemming way kits (link to web site below)
www.hemingwaykits.com
Causing problems when it came out of the chuck
Reaming a hole running true and offset
Visit Hemingway Kits hemingwaykits.com/HK221X
Visit Hemingway Kits hemingwaykits.com/HK221X
Next time assembly and test
00:00 intro
00:36 pivot assembly
01:30 Knurl
03:04 machine bore part off
05:51pivot ring
09:27 mill slot
09:43 turn pivot plate
11:22 mill
11:37 mill MT sleeve
12:45 tap and assemble parts
14:16 fit bush and review parts
Visit Hemingway Kits hemingwaykits.com/HK221X
00:07 intro
00:45 machine bore
01.59 thread cutting clamp
03:56 cut thread in bore
06:56 drill / tap thread
08:30 fit body and bore to size
09:45 turn cover
11:20 drill/fit cover to body
13:15 bore cover clean up o/d
Visit Hemingway Kits hemingwaykits.com/HK221X
00:0 intro
01:04 parts in kit
01:52 machine the ring
02:57 bore to size and depth
04:40 part off
05:11turn arbor to size
08:212 fit ring to arbor
11:22 machine thread
14:00 machine counter bore
15:05 drill holes
This draw bar is designed for a Myford lathe, but with the addition of a spacer (not included with the kit). It can be made to fit other lathes like Boxford.
Link Hemingway kits hemingwaykits.com/fitted-lathe-draw-bar
0:00 intro
2:52 handle
8:19 mill P.C.D.Test
11:47 Cut P.C.D
13:02 Screw cut thread
16:02 make 2nd thread
16:18 finish
16:44 modification details for Boxford
17:07 test
How to set the sine bar
see also compound slide milling youtu.be/FGMbGr-KVFo
6 boring bars 3 for threading and 3 for boring/facing
link Hemingway Kits hemingwaykits.com/small-hole-boring-tool-set
part 1 youtu.be/T66nvbZhYDs00:intro
00:43 set up / drill blocks for bars
04:11 machine boring bar ends
09:06 drill. torsion bar holes
13:44 make torsion bars
15:35 tool bits
17:04 test
6 boring bars 3 for threading and 3 for boring/facing 3/8 5/16 1/4"
link Hemingway Kits hemingwaykits.com/small-hole-boring-tool-set
part 2 link youtu.be/1zKq0sifkvk00:00 intro
00.56 mill holders
07:16 turn clamps
10:19 machine slot in clamp
12:43 make spacers
how to Make a Morse Taper cleaner youtu.be/bfUXDsh9NqU
00:00 intro
01:05 making a test bar
05:30 Lathe bed / tailstock
06:50 Test bar set up
09:20 Testing offset
11:34 Tailstock vertical test
12:45 Remove tailstock and shim up
15:00 Retest
link to product https://ban.ggood.vip/13lFT
00:00 start & intro
00:40 products
02:55 drill/tap hole
05:25 check bolt fit
05:48 5mm tap
07:06 check bolt fit
07:32 drill another thread
09:21 summarise
will it work ?
kit from hemingwaykits.com/tailstock-die-holder
00:47 cut external thread
02:00 assembly and turn OD
03:50 milll slots in cones
05:16 make die adaptor
06:34 guide bar and Morse Taper
09:59 fit index fixture for holes
11:20 milll torque arm
12:22 test
No more worries about the die hitting the bar end and damaging the lathe or die.
The die revolves when the part hits the end of the thread.
all the materials and drawings/instructions from Hemingway kits
visit www.hemingwaykits.com
00:00 intro
00:56 other methods of holding a die
02:45 kit of parts
03:04 first parts two cones
05:25 die holder
11:17 turn taper
12:40 turn thread
00:00 intro
00:38 prepare material
04:30 fit radius attachment
05:28 setting radius size
07:00 start to cut radius
12 :58 steel ball cutting
00:00 intro
01:39 turn part
03:19 drill/ream
04:04 1st fit remove sharp edges
07:041 part off
09:27 finish other end
11:56 fit stand
00:00 intro
01:22 turn punch end
08:28 turn shoulder
11:12 start knurl
14:12 turn 2nd shoulder
1545:part off
00:00 intro
00:43 turning
03:02 setting tool height
03:58 turning
06:12 headstock die holder cut thread
08:00 test thread
09:12 knurling
15:30 part off
This can be used in the lathe for polishing jobs
00:00 intro
01:03 polishing mop
01:27 bench grinder
02:46 making arbor
06:02 setup for thread cutting
09:38 thread cutting
12:14 fitting test
12:48 lathe set up for polishing
Link to Bore centring gauge: bit.ly/3tmlOZV
Link to edge finder bit.ly/2X6iUtW
00:00 intro
00:07 how they work
03:35 machine datum bore
07:07 fit edge finder
12:23 fit centring indicator
15:00 results
00:00 intro
01:36 screw bit problem
02:47 microscope view
03:47 grinder
04:44 grinder set up
06:37 grind bit
09:15 microscope view
10:03 grinder
12:11 fixture details
15:12 microscope view
15:44 test
link for drills https://ban.ggood.vip/12c6E
link for magnifying https://ban.ggood.vip/12c6N
Note check you have supplier as CN not CZ for UK shipment
00:0 intro
01:03 drill set
02:49 drill test 3 & 6.5mm
05:29 check drill cutting edge
08:52 drill package
09:29 magnify/ lamp
00:00 INTRO
00: 45 what's needed
03:17 machine blank lathe
06:45 mill hexagon
11:09 back to the lathe
12:37 sharpen parting off tool tool
10:33 part off
16:00 fit part
00:00 intro
00:40 strip lathe
04:30 remove apron
06:30 modification to top slide nut
08:56 remove top slide screw
0950 fit oilers to the saddle
14:30 rebuild
00:00 intro
02:27 remove rust
08:11 mill screw driver flats
11:29 assembly
11:45 second blade
12:20 Phillips blade mill
17:26 Phillips blade lathe
18:49 test end
19:17 finish
00:00 intro
00:43 plastic gear
04:20bird box blue tits
04:37 turning nylon blanc
09:56 setting parting off tool
11:56 part off
13:50 finish and fit part
Making changes to the door switches and testing the features.
fitting the motor link youtu.be/fVmkl-Vkmm4
Info on inverters http://www.transwave.co.uk
00:00 intro
00:45 power off how its fitted
02:50 fitting remote control box
03:53 adapting original on/off switch
07:05 inverter housing and wires
08:58 power up
10:50 motor test
12:17 readings on the inverter
13:50 lamp and rev counter working
fit the motor and check the speeds
00:00 intro
00:35 the motor
01:27 Remove the old motor from the lathe
03:36 Place motor on the bench
08:08 Fit new motor and remove old transformer
10:10 drive system test speeds
18:21 summary
fixing the sensor to the end of the lathe spindle
link to rpm meter https://ban.ggood.vip/122sp
see part one if you just want to check the speeds
part one link checking speeds youtu.be/WCz_Q8Ndxd0
00:00 intro
00:26 checking fitting options
00:50 modification of spindle nut
02:28 machining end plate and bracket
04:59 reassembly
09:11 fitting the wire
10:06 test
where to fit the sensor
link for rpm meter https://ban.ggood.vip/122sp
00:00 intro
01:01parts needed
02:28 wiring the unit
03:29 setup on lathe to test
04:42 testing lathe speeds
08:80 where to fit the sensor?
10:39 removing part to get access
13:36 machining the parts
00:00 intro
00:37 parts used
01:12 start to machine the parts
02:31 fitting the radius fixture
03:58 machining radius
06:08 machine bolt
08:43 tee nut base
11:15 mill tee nut
13:09 fitting tee nut
14:08 mill block to hold rod
15:21 boring head used
16:20 make stop rod
17:58 drill tap block
20:39 assembly
Mini saw link bit.ly/3seYw9S
internal mic https://ban.ggood.vip/10R9w
Centre MT2 https://ban.ggood.vip/10R9x
for more info visit www.claymills.org.uk
Part 2 youtu.be/NwIejZTR-tY
Bore centring gauge Link : bit.ly/3tmlOZV


