Tales From The Tinkerage
Yew Celtic spoon - detailed video
updated
After much research, trawling the internet and asking friends and family for their recommendations I eventually settled on the Bosch GSB 18V-55 from Screwfix for just a penny shy of £100. screwfix.com/p/bosch-gsb-18v-55-18v-2-0ah-li-ion-coolpack-brushless-cordless-drill-driver/242kh
It's also available from Amazon with bits and there are further reviews there. This is an Amazon affiliate link: amzn.to/3uMMW4s
In the video I check out the drill for the first time and put it up against the aging Dewalt. So have a look and see how they compare and whether I like it or not.
As an Amazon Associate I earn from qualifying purchases, without it costing you a penny.
--------------------------------
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: facebook.com/TalesFromTheTinkerage
And if you want to support me even more then do consider supporting me via Patreon: patreon.com/talesfromthetinkerage
I considered her a friend.
She was the epitomy of a maker.
She was a teacher. In this podcast I share just 42, or so, lessons that I have learned from Sharon.
I'm sorry for some of the longer than normal gaps and the sometimes slightly under par voice; recording this was difficult. I hope you understand.
Rather than share my social details here this episode, go and check out Sharon's work. Also Phil Thompson and Dan Gamble's.
instagram.com/figmentsmade
youtube.com/channel/UCXE2rNheoxIiBrcQC5Djo1A
youtube.com/watch?v=yh2RVoCjyEs
instagram.com/dark_starstudio
instagram.com/curiousmakerdan
youtube.com/user/da9amb0
In this video I go through five, well actually six, reasons why you should start out on the YouTube creator journey. And I give a couple of reasons that shouldn't be your driving force.
This is the video version of Episode 16 of my podcast Thoughts From The Tinkerage and will be cross-posted to the the YouTube channel for that too. It would be great if you could pop over there, subscribe and listen to the episodes there. youtube.com/channel/UCSI3Qo4dqdY3r3WGlXMPF9g
Honourable mentions in this episode go to:
Christopher Smith, The Woodgineer: youtube.com/the_woodgineer
Steve House, Moonshine Metalworks and also The Forge: youtube.com/moonshinemetalworks & youtube.com/theforgeuk
Peter Millard, The 10-Minute Workshop: youtube.com/user/petermillard1
& Jimmy DiResta: youtube.com/jimmydiresta
--------------------------------
If you have any questions, pop them in the comments and I will try to answer them. I do try to answer all comments.
If you are interested in the tools I use then you can follow these links:
amzn.to/35p1rBj (Amazon UK Affiliate link) Boya M1 Lav Mic
amzn.to/2FgtJDq (Amazon UK Affiliate link) 48W Led Panel
As an Amazon Associate I earn from qualifying purchases.
--------------------------------
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: facebook.com/TalesFromTheTinkerage
And if you want to support me even more then do consider supporting me via Patreon: patreon.com/talesfromthetinkerage
If you have any questions, pop them in the comments and I will try to answer them. I do try to answer all comments.
--------------------------------
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: facebook.com/TalesFromTheTinkerage
And if you want to support me even more then do consider supporting me via Patreon: patreon.com/talesfromthetinkerage
youtu.be/PJ0s5OJ1zEc
--------------------------------
If you have any questions, pop them in the comments and I will try to answer them. I do try to answer all comments.
If you are interested in getting some of the filament I use then you can follow this link:
amzn.to/3pRg8W8 (Amazon UK Affiliate link) Sunlu PLA+ filament
As an Amazon Associate I earn from qualifying purchases.
--------------------------------
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: facebook.com/TalesFromTheTinkerage
And if you want to support me even more then do consider supporting me via Patreon: patreon.com/talesfromthetinkerage
If you have ideas for what I should start thinking about for my 200th video then let me know in the comments below.
Here are links to Andy's and Rasmus's channels:
youtube.com/nomastercreations
youtube.com/user/Axrac
--------------------------------
If you have any questions, pop them in the comments and I will try to answer them. I do try to answer all comments.
--------------------------------
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: facebook.com/TalesFromTheTinkerage
And if you want to support me even more then do consider supporting me via Patreon: patreon.com/talesfromthetinkerage
Here is a list of the Youtube channels and Instagram pages for the makers I mention during the video. And after my contact details are a list of some of the tools that I use that are available on Amazon. This is not an affiliate link list but hopefully it will be soon.
Makers:-
Wonky Workshop: youtube.com/channel/UCCBtRTLRG7feeQHo1b3e-7Q & instagram.com/wonkyworkshop
Prickly Sauce: youtube.com/channel/UCL2soflHdZyT0PgrVxakxWA & instagram.com/pricklysauce
Refuse Reuse: youtube.com/channel/UCdN8U7cSZyfdDd8epf-zU0g & instagram.com/refuse_reuse_
Wavecycles: youtube.com/channel/UC2hTv0VXWOaBcZwg0x7gkcQ & instagram.com/wavecycles
The Mad Maker: youtube.com/channel/UCF0zB_FmO7xkumjrFMHPb4A & instagram.com/themadmaker_yt
--------------------------------
If you have any questions, pop them in the comments and I will try to answer them. I do try to answer all comments.
--------------------------------
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: facebook.com/TalesFromTheTinkerage
And if you want to support me even more then do consider supporting me via Patreon: patreon.com/talesfromthetinkerage
--------------------------------
Non-affiliate Amazon links:-
3M Optime Ear Defenders: amazon.co.uk/PELTOR-Optime-Earmuffs-Mounted-H540P3EA-413-SV/dp/B01AT4A88K/ref=sr_1_13
JSP Half-mask Respirator: amazon.co.uk/ForceTM8-Respirator-Complete-PressToCheckTM-Filters/dp/B00ZCOFHM0/ref=sr_1_3
Bolle Safety Glasses: amazon.co.uk/Bolle-Contour-Safety-Glasses-Clear/dp/B01N538ZF8/ref=sr_1_7
Overglasses: amazon.co.uk/Hilka-77994402-Safety-Specs-Glasses/dp/B01G31X00Q/ref=sr_1_7
Bulldog Clips: amazon.co.uk/Bulldog-Clips-Foldback-Binder-Stationary/dp/B07M89LRCH/ref=sr_1_5
DeWalt DW625EKT Router: amazon.co.uk/DeWalt-DW625EKT-GB-DW625EKT-Variable-Plunge/dp/B0120YNSV6/ref=sr_1_4
Scheppach Scroll Saw: amazon.co.uk/Scheppach-SD1600V-16-Inch-Scroll-Saw-Blue/dp/B015ZMZE30/ref=sr_1_1
Joby Gorilla Pod: amazon.co.uk/Joby-JB01511-BWW-GorillaPod-1K-Stand/dp/B074WGRBGC/ref=sr_1_3
Sugru: amazon.co.uk/Sugru-Mouldable-Glue-Family-safe-Skin-friendly/dp/B074KMC3TF/ref=sr_1_5
Raaco Storage Drawers: amazon.co.uk/Raaco-RAA126762-Parts-Storage/dp/B0001JZYAG/ref=sr_1_1
Bosch Glue Gun: amazon.co.uk/Bosch-Glue-Extra-Length-Nozzle-Stick/dp/B0001D1Q72/ref=sr_1_1_sspa
Trauma/EMT/Tuffcut Shears: amazon.co.uk/Scissors-Tough-Shears-Paramedic-Emergency/dp/B00AKE20PE/ref=sr_1_5
Automatic Wire Cutters: amazon.co.uk/Silverline-296135-Automatic-Wire-Stripper/dp/B003TNWQ20/ref=sr_1_14
Short Hammer: amazon.co.uk/Rolson-11201-Stubby-Claw-Hammer/dp/B00JITHXRM/ref=sr_1_4
Haemostats: amazon.co.uk/Comdent-Mosquito-Hemostat-Straight-Stainless/dp/B08179MJQB/ref=sr_1_6
Extending Magnet: amazon.co.uk/Blue-Spot-Magnetic-Extending-Pick/dp/B000LPC1LU/ref=sr_1_6
Katsu Router: amazon.co.uk/101748-Electric-Trimmer-Laminator-Joiners/dp/B00LVVJ99U/ref=sr_1_1
Die Grinder & Flex Shaft: amazon.co.uk/GOXAWEE-170Pcs-Multi-Functional-Rotary-Tool/dp/B074PRD547/ref=sr_1_4
Tack Lifter: amazon.co.uk/Draper-64804-195-Tack-Lifter/dp/B0001K9ZAK/ref=sr_1_3
Ring Mandrel: amazon.co.uk/Jadpes-Mandrel-Jewelry-Measuring-Diameters/dp/B07TW8N879/ref=sr_1_1_sspa
Sealey 25mm Belt & 125mm Disc Sander: amazon.co.uk/Sealey-SM750-Sander-762mm-%C3%98125mm/dp/B00BTYPKW4/ref=sr_1_1
Sanding Belts: amazon.co.uk/Sanding-Sander-Woodworking-Polishing-Aluminum/dp/B07PN8YWH6/ref=pd_bxgy_2/262-5926096-5866756
Locking Tweezers: amazon.co.uk/Invero%C2%AE-Prestige-Insulated-Soldering-Tweezers/dp/B075ZTYWDN/ref=sr_1_5
Spear & Jackson Predator Saws: amazon.co.uk/Spear-Jackson-Predator-B9822-Universal/dp/B001E19U8C/ref=sr_1_1 & amazon.co.uk/Spear-Jackson-Predator-Second-Woodsaw/dp/B06VV6FSSG/ref=sr_1_11
Magnetic Bowl: amazon.co.uk/MIKI-ZRound-Magnetic-Stainless-Garage-Organizer/dp/B082W3PG59/ref=sr_1_1_sspa
WD40: amazon.co.uk/WD-40-Original-Spray-Can-600ml/dp/B0001P16XO/ref=sr_1_5
BT Powerline Broadband Extender: amazon.co.uk/BT-Broadband-Extender-wired-Powerline/dp/B015E3MXKC/ref=sr_1_3
I'm going to aim to get one out to you every month (or so).
If you have any questions, pop them in the comments and I will try to answer them. I do try to answer all comments.
--------------------------------
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: facebook.com/TalesFromTheTinkerage
And if you want to support me even more then do consider supporting me via Patreon: patreon.com/talesfromthetinkerage
In a few months time when I have given it some proper use, I will do a proper review of it's strengths and weaknesses.
If you are interested in getting one then you can follow this link:
amzn.to/2Z2khdC (Amazon UK Affiliate link)
As an Amazon Associate I earn from qualifying purchases.
If you have any questions, pop them in the comments and I will try to answer them. I do try to answer all comments.
--------------------------------
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: facebook.com/TalesFromTheTinkerage
And if you want to support me even more then do consider supporting me via Patreon: patreon.com/talesfromthetinkerage
If you have any questions, pop them in the comments and I will try to answer them. I do try to answer all comments.
--------------------------------
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: facebook.com/TalesFromTheTinkerage
And if you want to support me even more then do consider supporting me via Patreon: patreon.com/talesfromthetinkerage
If you like these short tips then do check out the rest of the Tips from The Tinkerage playlist.
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
I really appreciate comments and endeavour to reply to them all.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: facebook.com/TalesFromTheTinkerage
And if you want to support me even more then do consider supporting me via Patreon: www.patreon.com/talesfromthetinkerage
Thank you to everyone that has subscribed, watched my videos, supported and encouraged me. The journey will continue.
To celebrate I am doing a little giveaway. There are two things to win, which is all explained in the video. One item is the Celtic knot shown in the thumbnail which will go to someone outside of Europe. The other is yet to be made, keep an eye out for some videos on the making of it, and will be for someone in the UK or Europe. It will most likely be a spoon from a nice piece of yew I have, although I may change the piece/material if I get a better idea during the planning stage. Suggestions are welcome.
To enter all you have to do is leave a comment on this video, which must include your location so I know which item you will be eligible for. I will post the Celtic knot anywhere in the world but I can not be responsible for local customs charges or confiscation.
The draw, which will be in two parts for UK/Europe & ROTW, will close when I finish the item for UK/Europe which should be by Christmas, so there is plenty of time. I will either assign numbers to comments and use a random number generator or I will use a comment selector app.
Please only enter if you are a subscriber as this is meant to be a gift of thanks.
If you have any questions, pop them in the comments and I will try to answer them. I do try to answer all comments.
--------------------------------
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: facebook.com/TalesFromTheTinkerage
And if you want to support me even more then do consider supporting me via Patreon: patreon.com/talesfromthetinkerage
The FX 83ES is the dual power variant, with both a battery and a solar panel. In low light conditions the solar panel will not work so if the battery has lost it's charge then the calculator will appear to be dead.
It takes an LR44 button cell which are readily available from a number of sources.
With a suitable small screwdriver it should take less than five minutes to change the battery. Casio recommend changing the battery every three years even if the calculator appears to be working correctly. It is certainly something to think of doing prior to any important examinations if you have been using the calculator regularly and are concerned that the lighting in your examination hall is not going to be bright enough to power it using just the solar cell.
If you have any questions, pop them in the comments and I will try to answer them. I do try to answer all comments.
--------------------------------
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: https://www.facebook.com/TalesFromThe...
And if you want to support me even more then do consider supporting me via Patreon: patreon.com/talesfromthetinkerage
I would recommend that you make this a regular part of your maintenance of your cleaner as leaving too long, as I did, severely reduces the effectiveness of the cleaner.
You might also want to check out the first video in this series in which I clean compacted hair from the beater bar.
If you have any questions, pop them in the comments and I will try to answer them. I do try to answer all comments.
--------------------------------
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: https://www.facebook.com/TalesFromThe...
And if you want to support me even more then do consider supporting me via Patreon: patreon.com/talesfromthetinkerage
I would recommend that you make this a regular part of your maintenance of your cleaner as leaving too long, as I did, compacts the hair and makes it much harder.
If you have any questions, pop them in the comments and I will try to answer them. I do try to answer all comments.
--------------------------------
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: https://www.facebook.com/TalesFromThe...
And if you want to support me even more then do consider supporting me via Patreon: patreon.com/talesfromthetinkerage
With this generous gift and the generous help of Andy Peckham @nomastercreations on Instagram & Youtube: youtube.com/channel/UCOM7mhGxTlhAhd7RMRGN_jA and the amazing expertise of Jamie Reader @thecustomcave on Instagram I have managed to get the machine working.
The maker community is just an awesome place.
With their patient and ever-present virtual assistance I intend, over the next few months and years, to descend into the rabbit hole that is 3d printing.
Now, if you are concerned that this will be the only thing I video going forward, fear not, I still intend to explore the rabbit warren that is making. I do want, however, to catalogue the process and keep a record of my learning. This will give me something to look back at and hopefully it will give other people another source of help when they are exploring their own 3d printing rabbit hole.
If you carefully at the thumbnail you will notice that I did manage to successfully print the calibration cube. This is the link to it on Thingiverse: thingiverse.com/thing:2882777
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
I really appreciate comments and endeavour to reply to them all.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: https://www.facebook.com/TalesFromThe...
And if you want to support me even more then do consider supporting me via Patreon: www.patreon.com/talesfromthetinkerage
If you like these short tips then do check out the rest of the Tips from The Tinkerage playlist.
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
I really appreciate comments and endeavour to reply to them all.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: https://www.facebook.com/TalesFromThe...
And if you want to support me even more then do consider supporting me via Patreon: www.patreon.com/talesfromthetinkerage
If you don't watch the video then the message is simple. Don't let your funeral be the time when your dreams get actualised.
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
I really appreciate comments and endeavour to reply to them all.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: https://www.facebook.com/TalesFromThe...
And if you want to support me even more then do consider supporting me via Patreon: www.patreon.com/talesfromthetinkerage
I've had one for about ten months, as of the time of uploading this video, and Aldi are just about to have another batch of the bandsaws available to buy in the UK. So here's my thoughts on it.
The bandsaw is available in-store or from their website: aldi.co.uk/workzone-electric-band-saw-350w/p/013419269282600?gclid=Cj0KCQjwxMjnBRCtARIsAGwWnBPRhdKSsGme_CV6kn_V0c8SkooL0Z6aunErkPwLRai08S8rR7oIr80aAmPNEALw_wcB&gclsrc=aw.ds
If you have any questions, pop them in the comments and I will try to answer them. I do try to answer all comments.
--------------------------------
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: https://www.facebook.com/TalesFromThe...
And if you want to support me even more then do consider supporting me via Patreon: www.patreon.com/talesfromthetinkerage
Just one day over my schedule for reorganising the Tinkerage. So much progress has been made over the last few months. Check out today's progress. And if you haven't seen how far the Tinkerage has come then do check out the playlist.
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
I really appreciate comments and endeavour to reply to them all.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: https://www.facebook.com/TalesFromThe...
And if you want to support me even more then do consider supporting me via Patreon: www.patreon.com/talesfromthetinkerage
With just one more day left on my schedule for reorganising the Tinkerage, significant progress has been made. Check out today's progress and hear what is on the cards for tomorrow.
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
I really appreciate comments and endeavour to reply to them all.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: https://www.facebook.com/TalesFromThe...
And if you want to support me even more then do consider supporting me via Patreon: www.patreon.com/talesfromthetinkerage
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
I really appreciate comments and endeavour to reply to them all.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: https://www.facebook.com/TalesFromThe...
And if you want to support me even more then do consider supporting me via Patreon: www.patreon.com/talesfromthetinkerage
I give a mention to John Clothier who is an amazing wood artist. You can check out his YouTube channel here:youtube.com/channel/UC2hWlsf15z-7-smBhGdZvNg and his Instagram feed: instagram.com/johnclothieruk
You can support me by clicking like and subscribing. This is an easy way to encourage me. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
I really appreciate comments and endeavour to reply to them all.
Here's a link to my Instagram feed: instagram.com/andycpugh
and my Facebook page: facebook.com/TalesFromTheTinkerage
And if you want to support me even more then do consider supporting me via Patreon: www.patreon.com/talesfromthetinkerage
This is a generations old, secret, family recipe so don't share it with anyone else! ;)
Do let me know if you have a go at making them though. Tag me @andycpugh and use the hashtag #TFTTwelshcakes on Instagram. www.instagram.com/andycpugh
Like any traditional recipe there are many variations on this. I think these are good. Ask anyone who tried them at Makers Central 2019.
If you like this content then do let me know and I'll try and do more.
You can support me by clicking like and subscribing. This is an easy way to encourage me.
And if you want to support me even more then do consider supporting me via Patreon: www.patreon.com/talesfromthetinkerage
Here's a link to my Instagram feed with some posts about Maker Central: instagram.com/andycpugh
Here's links to the very generous people I mentioned in the VLOG.
Jim from WaveCycles.
Instagram: instagram.com/wavecycles
YouTube: youtube.com/channel/UC2hTv0VXWOaBcZwg0x7gkcQ/videos
Simon Harman.
Instagram: instagram.com/sidon100uk
Andi Heal.
Instagram: instagram.com/ahbespoke
YouTube: youtube.com/ahbespoke
I forgot to mention in the VLOG that I am now on Patreon: patreon.com/talesfromthetinkerage .
If you know someone that is looking for a new workshop vacuum then maybe share this video with them.
If you like it or find it useful please hit the thumbs up and, if you haven't already, please subscribe.
Also if you would like to support my channel and work further then please consider supporting me on my new Patreon channel: patreon.com/talesfromthetinkerage .
This simple variation on a Celtic knot made from a scrap of Yew appealed as a quick two hour project (including filming time).
As I recently passed 600 subscribers here on YouTube I will be aiming to give this away to one of my subscribers as a token of my appreciation. So if you're not already subscribed please do so and also hit that notification bell. I'll give out the details of how to win it in the next vlog video which should come out in the next few days.
Both music tracks are from the YouTube Music Library.
Track 1: Don't Look by Silent Partner.
Track 2: Secret Conversations by The 126ers.
I really appreciate comments and endeavour to reply to them all. If you aren't already subscribed then please click the button and also click on the notification bell so that you get told when I've uploaded a new video.
Still more decisions to be made though. Especially on the nitty gritty of which tools go where.
Comments are always welcome, as are likes and subscriptions. And if you haven't already then do consider hitting the notification bell so that you get to see the regular updates when they get uploaded.
I'd love to read your comments. I try to respond to them all.
Do hit like and if you haven't subscribed already then doing that would be greatly appreciated.
There is a playlist of The Tinkerage Reorganisation Vlog, so if this is your first time here then checking that out will give you an idea of the progress I've made in The Tinkerage so far.
Do check out the other Tips from The Tinkerage. There is a playlist if you want to watch them en masse.
If you like this tip then please hit the like button and if you're not already subscribed please consider subscribing and click the notification bell so that you know when new videos are released.
Thank you for watching.
If this is your first episode of The Tinkerage Reorganisation VLOG then do consider having a look at some of the other episodes in the playlist to see the progress that has been made.
If you have ideas or comments that you think might help me in the reorganisation then please do add them to the comments. I try to respond to all comments.
Do click like and subscribe. And if you click the notification bell then you will get a reminder when a new video goes live.
Thanks you for watching.
This is a basic kit that I assembled myself. A good quality home or automobile first aid kit is probably going to have most of what you might need but you may prefer to make your own too. As I mentioned in this and the previous first aid video, you need to consider your own situation in making decisions. For example, if you're a regular user of a chain-saw then a proper tourniquet, clotting sponges and trauma bandages should be a part of your kit and should be close at hand.
Remember it is better to be prepared and not need it than to not have it when you need it.
If you find this useful then do please hit the subscribe and notification buttons as I intend to do a few more in this series.
In this longer than normal video I talk about the importance of first aid kits and having some basic first aid knowledge for those of us working in workshops. I cover some basics about risk assessment and identifying the inherent risks of your own workshop and working environment as part of the process about being suitably prepared if something were to go wrong.
I also talk about the use of tourniquets as a LAST RESORT in stemming major blood-loss.
This is an excellent article on the use of tourniquets: firstaidforlife.org.uk/tourniquets
Remember, it is better to be prepared for medical emergencies (training & equipment) and never need it than to need it and not be prepared.
Here are links to two of the videos I mentioned:
Gosforth Handyman: First Aid in a Small Workshop - Workshop Safety (part 1) youtube.com/watch?v=PGQv6Ejj-lU
Alec Steele: WHEN DISASTER STRIKES IN THE WORKSHOP!!! TRAUMA SELF-AID! Part 1 youtube.com/watch?v=Q6JziunEdZQ
And here are links to the British Red Cross: redcrossfirstaidtraining.co.uk
& St John Ambulance: http://www.sja.org.uk/sja/first-aid-training-courses.aspx.
I will do some additional videos on this topic soon, including a shorter video on the contents of my workshop first aid kit and another on improvised first aid, so do please hit subscribe and hit that notification button.
Stay safe!
These particular shelves are made from some left over 18mm plywood, butt jointed together in a simple form and then screwed into an existing wall bar. Obviously you can size these to best fit your own needs and available space.
You may notice that the back piece is not as deep as the overall shelf is high. There are two reasons for that. The first is that there is a support for the shelf above that sits at the centre which would obstruct the back from lying flat without a cutout. The second reason is that the plywood I had as all 7 inches wide, the perfect size for supporting the boxes, and I didn't want to rip a piece to fit it when it wasn't a necessity.
Do click like and subscribe if you haven't already done so.
If you want to get a better understanding of the reorganisation of The Tinkerage that I am working through at the moment then check out the playlist in the end-card.
And do go and check out some of my other videos.


