#belaying #harness #rockclimbing #climbinggear
EDELRID Knowledge Base
All sport climbing harnesses have elastic straps between leg loops and hip belt. Those elastics are not only a positioning support or comfort element. In case the harness is not properly adjusted the force transmission on the body can be incorrect which can result in uncontrolled falling scenarios. In this episode of the EDELRID Knowledge base we show how important it is to adjust your harness correctly and how the elastics straps are used to position the leg loops.
#belaying #harness #rockclimbing #climbinggear
#belaying #harness #rockclimbing #climbinggear
updated 1 year ago
#belaying #harness #rockclimbing #climbinggear
In practice, this situation comes up more often than we might think. For example:
✅ Clipping a sling directly into a bolt hanger, piton or nut, because you might have run out of gear
✅ Building a temporary anchor with limited gear
✅ Rappelling off minimal hardware when bailing
All of these scenarios involve textile material being loaded over metal with a certain radius. The question we wanted to answer is simple:
❓How much does the diameter and shape of the metal affect sling strength?
We tested a range of slings made from different materials and constructions, and loaded them over very different metal attachment points — from thin wires to larger, rounded surfaces. The results show that diameter and geometry do matter, and in some cases even relatively small differences can influence the residual strength of the textile.
The goal of this video is not to create alarm, but to better understand how equipment behaves outside of ideal lab conditions and to provide context for real-world anchor and rappel situations.
All detailed data, measurements, and background information are summarized in a written article on our Knowledge Base website:
🌐 edelrid.com/eu-en/knowledge/knowledge-base/influence-small-radii-on-textile-slings
Chapters:
00:00 - Intro
00:33 - Standard Testing
01:29 - Differences in Residual Strength With Different Geometries
02:24 - Differences in Residual Strength With Different Rediuses
03:43 - Summery of Results
04:33 - Conclusion
#ClimbingGear #ClimbingSafety #PPE #SlingTesting #AnchorBuilding #TradClimbing #AlpineClimbing #Dyneema #NylonSlings #GearAnalysis #ClimbingEducation
We test several differently ground picks by placing them into the same ice and watching how they behave. The idea is simple: see which shapes go in cleanly and which ones tend to blow out more ice. Less blasting, more predictable placements.
This episode is mostly observation. No big theory, just real placements in real ice, and what actually happens when you swing a pick that’s been ground differently.
If this kind of practical, slightly too-honest gear breakdown is useful to you, feel free to subscribe and follow along.
If you have not seen the previous episode about ice picks, make sure to check it out here:
youtube.com/watch?v=tBgD3gFQZyU
Chapters:
00:00 - Intro
00:39 - Recap of the Basics
01:07 - Comparison Ice vs Mixed Blade
01:56 - Comparison triangular vs parallel grinded pick
02:41 - Comparison flat vs. sharp angled pick
03:54 - Another Difference ice vs. mixed pick
05:41 - Summary & Conclusion
#iceclimbing #mixedclimbing #iceaxe #pickgeometry #picktuning #climbinggear #alpineclimbing
We break down what strong, aggressive swings create versus lighter, more controlled impacts — and why more force is not always better.
In this episode, we cover:
✅ Different ice climbing styles based on swing intensity and impact
✅ How varying hit strength affects pick penetration and holding forces
✅ What happens when a pick is fully loaded in real ice
✅ The relationship between swing technique, ice structure, and placement security
✅ Why some styles damage ice while others preserve it
Introducing the Low-Impact Style
A major focus of this episode is the Low-Impact Style — a refined approach to ice climbing that prioritizes:
💡Using existing ice structures instead of breaking new ones
💡Reducing unnecessary force and energy loss
💡Creating secure placements through delicate, repeated taps rather than hard swings
🪵🐦 “Be the woodpecker.”
Just like a woodpecker, this style relies on precision, rhythm, and efficiency. Light tapping allows the pick to settle naturally into the ice, creating safe, reliable placements — especially in delicate, brittle, or chandeliered ice where aggressive swinging can be dangerous. The video includes a hands-on experiment that demonstrates how the Low-Impact Style creates strong, trustworthy pick placements.
The result?
You climb more efficiently, more safely, and for longer — with far less fatigue.
This episode directly builds on our previous deep-dive into pick tuning and sets the foundation for understanding how movement, swing mechanics, and tool behavior all work together on steep ice.
youtube.com/watch?v=tBgD3gFQZyU&list=PLVfeMSQEnSTQPV8fgiUNogx2ty00_QdwZ
If you enjoy detailed, technique-focused breakdowns like this:
👍 Like the video
📺 Subscribe for upcoming episodes
🔔 Hit the bell so you don’t miss what’s next
Chapters:
00:00 - Intro
00:22 - Different Climbing Styles
01:12 - LIS explained - Structures
01:35 - LIS explained - Placement Depth
01:53 - LIS explained - Needed Force
02:50 - LIS explained - Creating Placements
03:26 - Finding the Force Base Values
05:04 - The Test Set Up Explained
05:52 - Test 1: Solid Placement
06:22 - Test 2: Medium Placement
07:07 - Test 3: LIS Placement 2 cm
08:23 - Test 4: LIS Placement 1 cm
09:00 - Summery & Conclusion
#iceclimbing #climbintstyle #climbingtechniques #mixedclimbing #geartips #mountaineering #drytooling #winterclimbing #alpineclimbing #iceaxe #icetools #gearmaintenance #climbinggear #climbingequipment #howto #diy #picktuning #climbingeducation
Better get subscribed :)
We cover:
✅ How to restore dull or rounded picks safely and effectively
✅ Tuning picks for pure ice — reducing “blasting” or fracturing when the pick enters the ice
✅ Tuning for mixed terrain — optimizing durability and precision on rock
✅ How pick geometry affects penetration, stability, and control
✅ Tools and methods for consistent, reliable sharpening
Understanding these adjustments can dramatically improve your placements, efficiency, and confidence on the climb.
This deep-dive sets the stage for our next episode, where we’ll explore swinging technique in ice climbing and how proper pick tuning ties directly into better movement and cleaner placements.
If you enjoy this kind of technical breakdown, don’t forget to like, subscribe, and hit the bell to catch the next installment!
Chapters:
00:00 - Intro
00:31 - Differences of Picks
01:41 - Damages & How-To Repair Them
05:37 - Tuning Ice Picks
07:08 - Tuning Mixed/Dry Tooling Picks
08:52 - Conclusion
#iceclimbing #mixedclimbing #geartips #mountaineering #drytooling #winterclimbing #alpineclimbing #iceaxe #icetools #gearmaintenance #climbinggear #climbingequipment #howto #diy #picktuning #climbingeducation
Once again, we’re joined by legendary climber Tommy Caldwell, whose experience on sharp granite big walls makes him the perfect partner for this test. Together, we explore how angled edges affect the dynamic test set-up, and ultimately, whether our lab-based cut-resistance data still holds up in the field.
It’s a brutal round of testing — ropes are flying, fibers are snapping, and the results might just change how you think about rope safety.
Watch Part Two to see how real-world physics meets the sharp edge of reality (wow what a sentence 😎) — and what you can do to stay safe up there.
📢 Subscribe for more climbing science, safety tests, and real-world gear experiments! 📢
The links mentioned in this video are...
A detailed video explaining the testing method:
👉 youtube.com/watch?v=fE-PJ7DuU_k
The episode researching the relevance of the diameter of a rope on its cut resistance:
👉 youtube.com/watch?v=F93KzSmH1Ps
The last episode trying to figure out if any provided rope data can tell you anything about the cut resistance of a given rope:
👉 youtube.com/watch?v=7UKjRsKGv2c
Further knowledge articles about ropes:
✅ Cut resistance of ropes:
edelrid.com/eu-en/knowledge/knowledge-base/cut-resistance-of-ropes
✅ Constructional differences in ropes:
edelrid.com/eu-en/knowledge/knowledge-base/rope-basics-braiding-principles
✅ Ascending on ropes running over sharp edges:
edelrid.com/eu-en/knowledge/knowledge-base/sharp-edges-ascending
Chapters:
00:00 - Intro
00:40 - Recap of Past Testings & Challenges
03:12 - Test Set-Up Angled Edge
05:10 - The Tests
06:37 - Summary of Results & Conclusions
#cutresistance #TommyCaldwell #sharpedges #ppe #rockclimbing #workatheight #climbingrope #ropes #BigWallClimbing #ClimbingScience #SharpEdgeTest
And joining us is none other than Tommy Caldwell, one of the best big wall climbers in the world, to help us understand what really matters when the stakes are high.
In the lab, we’ve engineered a precise way to measure a rope’s cut resistance — but can those numbers actually predict what happens on the wall? Together with Tommy, we explore how factors like belaying technique, rope handling, and smart edge management can make the difference between safety and disaster.
Watch the full experiment, the drops, and Tommy’s insights — and learn what you can do to keep your rope (and yourself) safe.
📢 Subscribe for more climbing science, safety tests, and real-world gear experiments! 📢
The links mentioned in this video are...
A detailed video explaining the testing method:
👉 youtube.com/watch?v=fE-PJ7DuU_k
The episode researching the relevance of the diameter of a rope on its cut resistance:
👉 youtube.com/watch?v=F93KzSmH1Ps
The last episode trying to figure out if any provided rope data can tell you anything about the cut resistance of a given rope:
👉 youtube.com/watch?v=7UKjRsKGv2c
Further knowledge articles about ropes:
✅ Cut resistance of ropes:
edelrid.com/eu-en/knowledge/knowledge-base/cut-resistance-of-ropes
✅ Constructional differences in ropes:
edelrid.com/eu-en/knowledge/knowledge-base/rope-basics-braiding-principles
✅ Ascending on ropes running over sharp edges:
edelrid.com/eu-en/knowledge/knowledge-base/sharp-edges-ascending
Chapters:
00:00 - Intro
01:03 - What is a good Lab Test?
03:07 - Tommy's Experiences with Sharp Edges
07:10 - Description of the Test Set Up
09:00 - The Test Specimens
10:00 - Test 1 - Passive Belaying
10:54 - Test 2 - Passive Belaying
12:10 - Test 3 - Passive Belaying
12:45 - Test 4 - Passive Belaying
14:34 - Test 5 - Passive Belaying
14:55 - Intermediate Summery Results
16:35 - Active BElaying Tests
18:58 - Playing around
22:02 - Final Summery & Outlook
#cutresistance #TommyCaldwell #sharpedges #ppe #rockclimbing #workatheight #climbingrope #ropes #BigWallClimbing #ClimbingScience #SharpEdgeTest
In our conversation, we explore Svenja’s current research on collective emotions—how teams experience and respond to shared feelings and how that emotional synchronicity influences integration, cohesion, and performance. We also examine her insights into high-stakes group decision-making in mountaineering, where shared risk, leadership, and emotion norms dramatically impact safety—key questions for anyone using protective gear in climbing or working at heights.
From experimental field studies tracking pressure, indispensability, and performance, to translating scientific insight into practice through accessible tools for coaches and teams, Svenja brings a vibrant blend of theory, rigor, and real-world relevance.
Whether you’re a climber, a safety professional, or simply curious about how groups make decisions under pressure, this episode shines a light on how the emotional backbone of group dynamics can influence outcomes—sometimes saving lives. Don’t miss this illuminating conversation!
More about Svenja:
🌐 https://annescollege.fsu.edu/dr-svenja-wolf
🌐 scholar.google.com/citations?user=_uBRoUoAAAAJ&hl=en
More about the Albrecht von Dewitz Foundation (in German):
🌐 https://www.avd-stiftung.de/
#DecisionMaking #HumanFactors #GroupDynamics #RiskAssessment #CollectiveEmotions #TeamPerformance #SafetyScience #RockClimbing #IceClimbing #WorkingAtHeights #PersonalProtectiveEquipment #SafetyGear #AppliedPsychology #SocialPsychology #OrganizationalPsychology #SportPsychology #ScienceCommunication #ResearchMatters #SafetyFirst #RiskManagement
In this video, we break down why touching your climbing rope with chalky hands isn't just harmless fidgeting—it can drastically reduce the lifespan of your rope and even affect its performance. Whether you're trying to calm your nerves, prepping for your next try, or just following habit, it's time to get aware and rethink how you handle your rope during rests.
♻️ And remember: This isn’t just about safety—it’s also one of the most effective ways to reduce long-term waste. After all, when it comes to sustainability, the most powerful “R” has always been the first one: Reduce.
📘 Want to Go Deeper?
If you're looking for more information about potential harmful substances in regards to your textile PPE, explore our in-depth videos and articles on the EDELRID Knowledge Base:
✅ Article with updated collection of various harmful substances: edelrid.com/eu-en/knowledge/knowledge-base/harmful-substances-for-ropes-and-slings
✅ Video about harmful substances on textile PPE: youtube.com/watch?v=qJvGtyFqreA
Chapters:
00:00 - Intro
00:45 - Sustainable Climbing Ropes?
01:23 - The Experiment Set-Up
02:10 - Test 1 & Results with a Clean Rope
02:48 - Test 2 & Result with a Chalked Rope
03:29 - Test 3 & Result Chalked Rope to failure
04:11 - Summary of Results
04:38 - Conclusions and Recommendations
#harmfulsubstances #ropefailure #gearmaintnance #safetyequipment #abseiling #rapelling #riskassessment #ppe #climbinggear #knowledge #breakingthings
Building on our previous investigations into cut resistance of textile ropes, we wanted to bridge the gap between controlled lab experiments and real-world accidents. Accident statistics reveal that approximately half of rope failures occur in static situations, while the other half happen dynamically – making the dynamic scenario a crucial area for understanding system behavior.
So, what are the real risks when a climber experiences a dynamic fall over a proper edge? In this first video of a series, we examine this situation within a fall arrest context. We also explore how our findings compare to existing industry standards and test scenarios in this sector.
Join us as we put a fall arrest system to the test in a dynamic edge fall, revealing key insights into rope failure, system performance, and ultimately, climber safety.
Further Links to our cut resistance test:
✅ Basics about Cut Resistance: youtube.com/watch?v=fE-PJ7DuU_k&list=PLVfeMSQEnSTTSNSilzqiJwdTYqvDGCmtE&index=5
✅ Weight vs. Diameter: youtube.com/watch?v=F93KzSmH1Ps&list=PLVfeMSQEnSTTSNSilzqiJwdTYqvDGCmtE&index=3
✅ Summary of what we know: youtube.com/watch?v=7UKjRsKGv2c&list=PLVfeMSQEnSTTSNSilzqiJwdTYqvDGCmtE&index=1
Chapters:
00:00 - Intro
00:40 - Basic Test Set-Up
01:31 - First Test
01:54 - Explanation of Results
03:08 - Second Test
03:46 - Explanation of Results
04:28 - Conclusion
#workingatheights #sharpedges #scaffolding #ropefailure #fallarrest #ropeaccess #workatheight #falling #climbinggear #accidentshappen #workrestraint #ClimbingSafety #EdgeProtection #DynamicTesting #SafetyTesting #ClimbingEquipment #AccidentPrevention #RiskAssessment #GearReview #SafetyStandards
Join us as we investigate a serious canyoning accident where a rope unexpectedly broke during an abseil, causing severe injuries. In this video, Alex and Thomas, two experienced canyoning guides from Allgäu, join us to uncover the root cause of the rope failure.
📘 Learn More:
If you're looking to deepen your understanding of sharp edge risks and how to mitigate them, explore our in-depth videos and articles on the EDELRID Knowledge Base:
✅ Basics about Cut Resistance: youtube.com/watch?v=fE-PJ7DuU_k&list=PLVfeMSQEnSTTSNSilzqiJwdTYqvDGCmtE&index=5
✅ Weight vs. Diameter: youtube.com/watch?v=F93KzSmH1Ps&list=PLVfeMSQEnSTTSNSilzqiJwdTYqvDGCmtE&index=3
✅ Summary of what we know: youtube.com/watch?v=7UKjRsKGv2c&list=PLVfeMSQEnSTTSNSilzqiJwdTYqvDGCmtE&index=1
Chapters:
00:00 - Intro
00:30 - Accident Description
01:00 - Rope Break Analysis & Inspection
01:46 - Laboratory Testing & Simulations
02:19 - Discussion the Results
02:59 - Conclusion & Safety Recommendations
#canyoneering #ropefailure #cutresistance #canyoning #safetyequipment #abseiling #rapelling #riskassessment #ppe #climbinggear #knowledge #breakingthings
#splicing #ropework #climbinggear #ropetips #workatheight #arborist #treecare #treeclimbing #gearreview #knotskill #ropetrick #ppe #climbing #climbingtrees
A rope is pretty useless without one thing: Some kind of end termination! 🤯 Whether it's knotted, spliced, or manufactured – in our last episode of this series for now, will geek out on some construction specific details.
We'll be breaking down the anatomy of splicing, examining the role of crossover sections, and showing why longer cross-overs don’t always mean higher strength. From incorrect measurements to untapered ends and overtightened crossovers, we show you the weak points that can harm the strength of your splice. And of course… stuff will break! 🔨
If your interested in more topics about ropes, check out our dedicated playlists for rope topics:
✅ youtube.com/watch?v=7UKjRsKGv2c&list=PLVfeMSQEnSTTSNSilzqiJwdTYqvDGCmtE
Or check out more detailed articles about ropes and their constructions and handling:
✅ edelrid.com/de-en/knowledge/knowledge-base/rope-basics-braiding-principles
✅ edelrid.com/de-en/knowledge/knowledge-base/how-to-cut-ropes
Chapters:
00:00 - Intro
01:00 - Making a mistake with the measurements
01:30 - How about cross-over lengths?
01:45 - The Experiment and Tests
03:50 - Summary
#splicing #ropework #climbinggear #ropetips #workatheight #arborist #treecare #treeclimbing #gearreview #knotskill #ropetrick #ppe #climbing #climbingtrees
#splicing #ropework #climbinggear #ropetips #workatheight #arborist #treecare #treeclimbing #gearreview #knotskill #ropetrick #ppe #climbing #climbingtrees
A rope is pretty useless without one thing: Some kind of end termination! 🤯 Whether it's knotted, spliced, or manufactured – in this series, we're diving deep into the different types of rope terminations. In this episode, we’re putting the spotlight on splices and exposing their hidden risks and limitations.
We'll be looking at different splicing constructions like coreless, wedged, and interlocked to see how they hold up in potential real-world scenarios. From damaged sheaths to cyclical loads and cross-loading. And of course... stuff will break! 🔨
If your interested in more topics about ropes, check out our dedicated playlists for rope topics:
✅ youtube.com/watch?v=7UKjRsKGv2c&list=PLVfeMSQEnSTTSNSilzqiJwdTYqvDGCmtE
Or check out more detailed articles about ropes and their constructions and handling:
✅ edelrid.com/de-en/knowledge/knowledge-base/rope-basics-braiding-principles
✅ edelrid.com/de-en/knowledge/knowledge-base/how-to-cut-ropes
Chapters:
00:00 - Intro
01:08 - Different Splice Constructions
01:28 - Scenario 1: Damaged sheath on coreless eye splices
02:07 - Scenario 2: Cyclic Loads on Splices
04:19 - Scenario 3: Cross-Loading end terminations
06:10 - Summary
#splicing #ropework #climbinggear #ropetips #workatheight #arborist #treecare #treeclimbing #gearreview #knotskill #ropetrick #ppe #climbing #climbingtrees
#RopeSplicing #ArboristGear #PPE #TreeClimbing #RopeSafety #WorkAtHeight
- Different types of rope splices
- Key construction principles
- Hidden risks in splicing
- Why splices are superior to knots in certain applications
💡 Stay tuned for more deep dives into the world of ropes and splicing!
#Splicing #RopeSplicing #EndTermination #ClimbingGear #RopeTech #KnotsVsSplices #AdventureGear #StrongConnections
A rope is pretty useless without one thing: Some kind of end termination! 🤯 Whether knotted, spliced or manufactured – In this little series we will have a look at various rope terminations and specifically will take a closer look at the Splice.
In this episode we will explore the different basic construction principles of a splice by X-Raying them, identifying the potential risks in construction and of course... breaking them.
Discover why there's no single "best" termination, but always the right one for the job!
Stay tuned for more deep dives into the fascinating world of rope splicing!
If your interested in more topics about ropes, check out our dedicated playlists for rope topics:
✅ youtube.com/watch?v=7UKjRsKGv2c&list=PLVfeMSQEnSTTSNSilzqiJwdTYqvDGCmtE
Or check out more detailed articles about ropes and their constructions and handling:
✅ edelrid.com/de-en/knowledge/knowledge-base/rope-basics-braiding-principles
✅ edelrid.com/de-en/knowledge/knowledge-base/how-to-cut-ropes
Chapters:
00:00 - Intro
00:31 - Why Splices Are Awesome
01:24 - How a Splice Works
02:57 - Basic Eye-Splice Constructions
05:20 - The Standard Double-Braid Splice
06:15 - Break Tests
06:30 - Summary and Conclusion
#treecare #splicing #breakingthings #arborist #rope #ropeaccess #workatheight #climbinggear #gearreview #climbing #strengthtest #TextileEngineering #RopeMagic #BeautifulEngineering
#climbinggear #splices #ropeknowledge #manufacturing #testing #engineeringfacts
#ropetermination #knot #splice #sewneye #ropework #strengthtest #diy
A rope is pretty useless without one thing: Some kind of end termination! 🤯 Whether knotted, spliced or manufactured – In this little series we will have a look at various rope terminations and specifically will take a closer look at the Splice.
We'll dissect the most common eye types for textile ropes – the versatile knot, the classic sewn eye, and the mighty, beautiful splice – uncovering their advantages and limitations. And we play a little bit around with commonly used end terminations for wired ropes like pressed eyes as well as molded eyes on textile ropes.
And of course we will break them. To see how strong and efficient they are or can be and of course also.. because it is fun :)
Stay tuned for upcoming videos where we'll explore the intricate world of rope splicing in detail!
If your interested in more topics about ropes, check out our dedicated playlists for rope topics:
✅ youtube.com/watch?v=7UKjRsKGv2c&list=PLVfeMSQEnSTTSNSilzqiJwdTYqvDGCmtE
Or check out more detailed articles about ropes and their constructions and handling:
✅ edelrid.com/de-en/knowledge/knowledge-base/rope-basics-braiding-principles
✅ edelrid.com/de-en/knowledge/knowledge-base/how-to-cut-ropes
Chapters:
00:00 - Intro
00:30 - Overview Different End Terminations for Ropes
01:14 - The Knot
01:53 - The Sewn Eye
02:24 - The Spliced Eye
03:36 - The Pressed Eye
04:03 - Break Tests
05:15 - Special: The Molded Eye
06:05 - Summary and Conclusion
#treecare #splicing #breakingthings #arborist #rope #ropeaccess #workatheight #climbinggear #gearreview #climbing #verticalworld
This is the channel: @EDELRIDKnowledgeBase Make sure to subscribe!
This is the channel: @EDELRIDKnowledgeBase Make sure to subscribe!
We now have migrated all of our older video to this new channel. So from now on, get ready for new episodes. At least once a month we will upload another video full of independent knowledge about moving in the vertical world. Ice climbing, rock climbing, canyoneering, rope access, tree care, fall arrest, we will try to cover all kind of fields around ppe against falling from heights.
Why? Because we love finding out stuff. And because we think a lot of this could benefit many others out their in the field. Much of this happens in our free time and we just get the opportunity here to present this stuff for everybody interested :)
And the cool thing about this channel: it is from a manufacturer. So you get insights into how things are made, why we do them like we do them and we have access to all top-notch laboratories as well as can tweak products the way we want to find out what exactly causes the consequences in question.
So, be psyched! And also check out the website, that often has many more written articles with test results and deeper knowledge:
✅ edelrid.com/eu-en/knowledge/knowledge-base
Chapters:
00:00 - Intro
00:29 - Who we are
01:31 - What is the Knowledge Base?
02:19 - What topic qualifies for a Knowledge Base video?
02:48 - Can we actually treat topics objectively?
03:36 - What to expect from this channel?
#knowledge #ppe #climbinggear #workatheight #climbing #rockclimbing #ropeaccess #treecare #arborist #fallarrest #canyoneering #riskassessment #falling #breakingthings #iceclimbing #verticalworld #fallprotection #manufacturing #technicalclimbing #gearreview #safetyequipment #independentknowledge
The condition and durability of a climbing rope, be it a dynamic or a static rope, are highly dependent on the wide range of external influences. Frequent falls, dust as well as mechanical abrasion can damage a rope.
It is said, that the kink test provides a quick and rough check of the condition of a rope. For this purpose, the rope to be evaluated is bent and squeezed 180° at the point that should be assessed. But is this really telling a user anything? What does a rope manufacturer say to that test?
Check out the detailed article about that topic with more details:
✅ edelrid.com/eu-en/knowledge/knowledge-base/kink-test
Chapters:
00:00 - Intro
00:43 - How to check a rope
01:25 - The Kink Test
2:20 - Conclusion
#climbingrope #ropefailure #kinktest #climbinggear


