Modustrial Maker
DIY Mint Concrete Bench (or Stool) || How to Make
updated
In this full abandoned building renovation tour, I'm revealing the renovation resoluts of 4 years of hard work, converting this abandoned building in Chicago, into my dream home and workshop. For the regular viewers, there is a ton of new footage and reveals you haven't seen before, including dramatic makeovers of the primary bedroom an the studio/office. You won't want to miss this one. I also discuss plans for the channel, now that the renovation is done.
// ARIAT WORK LINKS
• 10% OFF your 1st Ariat order: bit.ly/3B7yZCh
• My Ariat Favorites: bit.ly/3LarbnO
• Get your customized Ariat gear: bit.ly/3eGRDJJ
I used parametric design to create a bean-shaped coffee table base from plywood, which I cut out on my Avid CNC. I then poured an
epoxy resin top directly on the plywood, so the plywood base would be embedded in the epoxy resin top. I also used table top epoxy to get a perfectly smooth top and bottom of the coffee table.
TOTAL BOAT EPOXY RESIN PRODUCTS
Fathom Deep Pour Epoxy: bit.ly/49M3GMY
Table Top Epoxy: bit.ly/4a85gcW
#woodworking
#epoxyresin
#resin
When I saw this log of an unidentified species of wood, that my hardwood lumber dealer just called swamp wood, I had to have it. The fluted cross section and mangrove-like side profile were both amazing. I decided to make a DIY coffee table from stumps of this log, with an epoxy resin top. I poured the epoxy resin around the stumps of wood, so that the cookie cross section of the wood stumps is exposed in the epoxy top, and the sides of the stump that form the table base are also visible. I think this woodworking and epoxy resin project came out super cool - but what do you think?
ARIAT WORK
$10 off all Rebar Made Tough Pants - bit.ly/4bNi9dq
Save 10% off your first Ariat order - bit.ly/3B7yZCh
My Ariat Favorites - bit.ly/3LarbnO
Get your customized Ariat gear here - bit.ly/3Bxi8u2
TOTAL BOAT EPOXY RESIN PRODUCTS
Fathom Deep Pour Epoxy: bit.ly/49M3GMY
Wood Honey Finish: bit.ly/49yViko
Penetrating Epoxy: bit.ly/49nfVzX
Thick Set Medium-Deep Epoxy: bit.ly/4bTLqDm
FLATTENING JIG PARTS
Linear Rails 16mm: (gantry/router sled) amzn.to/49U153B
Linear Rails 20mm (side rails): amzn.to/48Ba1dp
2” aluminum angle: amzn.to/49U153B
Rockler Ellipse Jig: amzn.to/3Ij5fGw
Blacktail N3 Nano: bit.ly/3wvRBxo
Ryobi glue gun: amzn.to/3uRUJmG
#woodworking
#epoxyresin
#resin
For this easy DIY staircase makeover, I show how to install maple hardwood stair treads, and how I make my own stair risers out of plywood. The star of the show is the LED under-tread lighting that is motion activated. For the LED stair lights, I installed motion sensors at the top and bottom of the staircase. I then routed channels under the nose of each stair tread, where I installed COB led strips, which are wired to and LED stair controller installed under the stairs. This is an easy DIY project that anyone can do, and makes a dramatic difference in the appearance of your stairs.
// LED stair lighting kit: amzn.to/3NFt3rr (I found the same kit on amazon yesterday)
// ARIAT WORK
10% OFF your first order -ariat.dkkdet.net/c/2478093/1085153/10644
My Favorites - ariat.dkkdet.net/c/2478093/1864164/10644
// ROCKLER PRODUCTS
Stair Tread Jig: bit.ly/4aggEUr
Router Table Package with Pro Lift: bit.ly/3v5GDh7
Router Table Cabinet: bit.ly/48oR4Le
Pro-Lift Router Insert: bit.ly/3jgbPSC
Cast Iron Router Table Top: bit.ly/3Rs9vb0
Router Table Fence: bit.ly/2SQSKrK
Router Table Dust Chute: bit.ly/3vg8TO8
// PATREON - Support the channel by becoming a Patron :)
patreon.com/modustrialmaker
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Web: modustrialmaker.com
00:00 Introduction
01:06 Stair Demolition
02:03 Repairing Stringer
04:01 Spray Finish on Stair Treads
05:28 Routing LED channels in Stair Treads
06:47 Making Plywood Risers
07:55 Installing Skirt Boards
09:39 Factor Ad Read
11:45 Installing Risers
13:47 Installing Treads with LED Strips
16:19 Controller for Motion Activated Lights
18:34 Beauty Shots / Outro
This DIY vinyl plank flooring install was a challenging one - the major challenge was installing vinyl plank against a curvy / irregularly shaped brick wall. We also installed directly over old ceramic tile in the hallway, without removing the tile.
For this project, I went with Flooret’s Soho luxury vinyl plank. If you’d like to support the channel and are in the market for vinyl plank flooring or engineered hardwood flooring, use the link https://spn.so/683hc0fr and enter the code MODUSTRIALFLOORET to order your flooring samples. Thanks in advance :)
// PATREON - Support the channel by becoming a Patron :)
patreon.com/modustrialmaker
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Web: modustrialmaker.com
Aside from the very close call with fire, we've got a lot done and finished off the abandoned building renovation over the last few months. This is the first of the final four renovation videos. In this video, we makeover the entrywa with a green feature wall with an LED neon sign. I show how to install the faux boxwood green wall, and 3D print a custom neon LED sign, with LED strips inside of it.
We also installed a new steel door and a steel fence on the roof deck, and installed a retractable screen in the garage. Lastly, I built out stairs with stair treads made from hardwood flooring to match the floors in the living area.
Floating Rock Shelf Video: youtu.be/qVmHsPjkooY
00:00 Introduction
00:31 Entryway Makeover
01:51 3D printed LED neon sign
04:36 Green Feature Wall Install
07:03 Steel Front Door & Fence Fabrication
07:39 Fence Install
09:01 AG1 Ad Read
11:06 Demolition - Door/Facade
11:52 FIRE! (and Door Install)
14:10 Upper Stair Makeover
18:47 Retracable Screen Install (Garage)
//LED Stair kit: amzn.to/3NFt3rr (same as one I used, different seller)
// Retractable Garage Screen
- USMOTIONS (USA-based Manufacturer): bit.ly/3RGUfbK
- BHS RETRACTABLES (Installer for IL, WI, MI)
website: bit.ly/3RGJtCj
Instagram: bit.ly/3Tjw6Jt (@bhsretractables)
// PATREON - Support the channel by becoming a Patron :)
patreon.com/modustrialmaker
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Web: modustrialmaker.com
// Rockler Stair Tread Jig: bit.ly/4aggEUr
// Products for Green Wall & Neon LED Sign
- Faux boxwood greenery: amzn.to/3GFmi4L
- Staple gun: amzn.to/3v1zSNC
- LED strip: amzn.to/3GGUFIH
- LED controller: amzn.to/4am8kCs
- LED power supply: amzn.to/3uY8kIM
- Standoffs: amzn.to/3GItcX8
- 3D Printer: amzn.to/3GETQQL
This Concrete LED Chandelier / Pendant Lighting is made with new LED rope. I've been looking for an LED product like this for over 5 years...and I finally found it. I combined the draping LED rope look with the urban decay concrete style i've used previously, and I think the resulting Pendant light is pretty darn cool. What do you think?
// LUKE LAMP
Instagram: instagram.com/lukelampco
Web: lukelampco.com
// ARIAT WORK - Black Friday: ariat.dkkdet.net/c/2478093/1881005/10644
// PATREON - Support the channel by becoming a Patron :)
patreon.com/modustrialmaker
// FOLLOW ME
• Instagram: @modustrialmaker - goo.gl/F4UdEs
• Blog: modustrialmaker.com
// LED PRODUCTS
LED Rope in Warm White: bit.ly/47IjVcV
RGB LED Rope: amzn.to/40SexBY
Dimmable White LED Controller: amzn.to/3sE5wjo
12V LED Power Supply: amzn.to/3SPKcBV
// CONCRETE LINKS
• Fishstone HP50 concrete mix: http://bit.ly/2YL4MFA
• Fishstone Concrete Recipes: http://bit.ly/2srpxtI
• Sprayer (aka hopper gun): http://bit.ly/2SqdhmO
• Collomix Mixer: bit.ly/3fr8TDl
• Collomix Water Doser: amzn.to/3y07wlb
• Acrylic Polymer: http://bit.ly/2SRQQHk
• Alkali Resistant (AR) glass fibers: amzn.to/31y6kEe
• Cake Fondant Tool for perfect edges: http://amzn.to/2w0JCVx
• U-Seal Sealer: amzn.to/3SYSCVs
• Helical Mixing Paddle: amzn.to/2GFyxjF
• Concrete mixer: http://amzn.to/2kEnZFi
• Concrete pigments: http://bit.ly/2GxzWrf
• 1-part concrete sealer: http://amzn.to/2xW7Gth
• Black 100% Silicone Caulk: http://amzn.to/2B64iRY
• Paste Finishing Wax: http://amzn.to/2kF565e
To make this DIY concrete floating shelf, I started by carving a mold from foam. I covered the foam mold / form with epoxy resin, and then sprayed glass fiber reinforced concrete (GFRC) to get a smooth surface. I then hand-packed the concrete back coat to ⅝” so that this shelf would be lightweight and could be hung with a hidden french cleat, since having no visible hardware is necessary.
// PATREON - Support the channel by becoming a Patron :) patreon.com/modustrialmaker
// FOLLOW ME • Instagram: @modustrialmaker - goo.gl/F4UdEs • Blog: modustrialmaker.com
// ROCKLER PRODUCTS
One-handed bar clamp: bit.ly/3otXi7t HVLP
Quick-Lever Clamp: bit.ly/3t3EpKH
// CONCRETE LINKS
• Fishstone HP50 concrete mix: http://bit.ly/2YL4MFA
• Fishstone Concrete Recipes: http://bit.ly/2srpxtI
• Sprayer (aka hopper gun): http://bit.ly/2SqdhmO
• Collomix Mixer: bit.ly/3fr8TDl
• Collomix Water Doser: amzn.to/3y07wlb
• Acrylic Polymer: http://bit.ly/2SRQQHk
• Alkali Resistant (AR) glass fibers: amzn.to/31y6kEe
• Cake Fondant Tool for perfect edges: http://amzn.to/2w0JCVx
• U-Seal Sealer: amzn.to/3SYSCVs
• Helical Mixing Paddle: amzn.to/2GFyxjF
• Concrete mixer: http://amzn.to/2kEnZFi
• Concrete pigments: http://bit.ly/2GxzWrf
• 1-part concrete sealer: http://amzn.to/2xW7Gth
• Black 100% Silicone Caulk: http://amzn.to/2B64iRY
• Paste Finishing Wax: http://amzn.to/2kF565e
// TOTAL BOAT EPOXY LINKS
GET 15% OFF TOTAL BOAT EPOXY with the CODE: “MODUSTRIAL” when purchased through http://www.jamestowndistributors.com
Table Top Epoxy: bit.ly/3l9oxQI
Torch: amzn.to/2XEp2ug
I went all out for this one! I built this modern lean-to style doghouse like a human home...it is full insulated, with insulation in the walls and insulation in the roof and floor. I used laminate plank flooring, and made my own plexiglass window. I used Trex deck boards for the pool deck, and a stock tank for the dog pool. The stock tank pool will serve double duty, since I can fill it with ice, and use it as an ice trough for beverages when I have parties up on my rooftop. I also built a green wall with a custom LED neon sign, which was the biggest splurge of the project ($400!). I also added solar wall fans and silver exhaust fans to help with ventilation and keeping the dog house warm in the winter and cool in the summer. All in, I spent about $3000 building my dog Tex a dream doghouse with dog pool. What do you think - was it worth it?
// PLANS for Doghouse: modustrialmaker.com/plans
//DONATE to No Dogs Left Behind and help rescue dogs from the dog meat trade:
bit.ly/3OyKKJV
// ARIAT LINKS:
Save 10% off your first Ariat order - bit.ly/453Q51e
My Ariat Favorites - bit.ly/3DtyO5M
Ariat Crew (for customized Ariat gear) - bit.ly/3qwD7Hb
// ROCKLER PRODUCTS
One-handed bar clamp: bit.ly/3otXi7t
HVLP Paint Sprayer: bit.ly/44YvxqW
Quick-Lever Clamp: bit.ly/3t3EpKH
// Drew Builds Stuff YouTube: bit.ly/43Kfs7d
// DOGHOUSE PRODUCT LINKS
Faux Boxwood Greenery: amzn.to/3rQNLN2
Solar Wall Fan: amzn.to/44K4vnt
Solar Vent Fan: amzn.to/43L1m5q
Pool Drain (brass): amzn.to/3rMtMPs
Pool Fountain (solar): amzn.to/3QfTyG3
Custom LED Neon Sign: amzn.to/3Ki3cnP
Staple Gun: amzn.to/3CV0GzM
Stainless Steel Staples: amzn.to/3prIGtt
LED Pool Lights: amzn.to/3QfeoFe
Aluminum LED Profile Channel: amzn.to/3YaRbGe
LED Strip (waterproof): amzn.to/3YcSwfQ
Plexiglass Sheet: amzn.to/43EDQqU
Laminate Plank Flooring: amzn.to/3Kg940G
Stock Tank: bit.ly/3QdZgYQ
Vent Cover: amzn.to/3Oyffjl
Exterior Caulk (black): amzn.to/3Oyffjl
Exterior Paint (flat black): amzn.to/44K7XhV
Flex-Seal Liquid: amzn.to/3Y9ePTu
My Favorite Caulk Gun: amzn.to/3q491OL
#diy
#doghouse
#diyproject
This video shows an easy DIY process that anyone can use artificial or synthetic grass or turf, on just about any surface - over concrete, an existing deck, or over dirt in your yard. Using a combination of nailer boards and Air Drain underlayment, the DIY turf installation is super simple.
CHAPTERS
// PRODUCT LINKS
Artificial Turf: usartificialgrass.com/product/imperial-pro
Air Drain:bit.ly/3NtA3XA
Box Cutter: amzn.to/46xeIF5
Envirofill Infill: amzn.to/3Nxux6f
Seam Tape: amzn.to/3PwSGMN
Staple Gun: amzn.to/3CV0GzM
Stainless Steel Staples: amzn.to/3prIGtt
Drop Spreader: amzn.to/3r86vXU
// REFERENCE LINKS
Nailer Board in Dirt: bit.ly/445LbAN
Dirt Install (BYOT): youtu.be/zAQvAUc-dLU
Install Directly on Roof: bit.ly/44o2D39
Install over Concrete: bit.ly/3Nxn5YD or bit.ly/42ZSysg or bit.ly/3XwgUIR
#artificialgrass
#syntheticturf #diy
// CHAPTERS
00:00 Introduction
01:05 Turf Installation Substrate
01:29 Nailer Boards and Air Drain Underlayment
05:10 Preparing for Grass Installation
05:37 Cutting Artificial Turf to Rough Size
07:03 Stapling Synthetic Grass to Nailer Board
07:56 Simplisafe Ad Read
09:38 How to Seam Artificial Grass
12:58 Cutting Edges of Grass to Final Size
15:22 Adding Infill to Synthethic Grass
17:28 Revealing the Artificial Grass Yard
This video tops off the abandoned building renovation (literally!) with an amazing rooftop yard and deck. I show how I built a DIY rooftop deck with composite decking and a picture frame deck border, which is level with a 500 sq ft artificial grass surface. The synthetic grass is installed so that it is pet friendly – Tex can do his business no problem! And with the level install allowing you to walk easily between the deck and grass surfaces, I think I’ve achieved the feel and function of a real suburban yard on my city rooftop!
ROCKLER PRODUCTS
One handed bar clamp: bit.ly/3otXi7t
Quick lever clamp: bit.ly/3t3EpKH
ARIAT WORK
Ariat Outpace Composite Toe Sneakers: bit.ly/3NJjo3x
Save 10% off your first Ariat order - bit.ly/3DfML8N
My Ariat Favorites - bit.ly/3xe6K3K
Air Drain: bit.ly/3NtA3XA
#artificialgrass
#deck
#howto
#jackery #solargenerator #sg2000plus #portablepowerstation
In this Beginner/DIY vs. PRO challenge, we find out if a YouTube woodworker pro is really better than a beginner, when my cameraman and I both build standing desks. These desks have all the bells and whistles… hidden wireless charging, epoxy resin inlays, monitor stands, cable management, and more.
// PATREON - Support the channel by becoming a Patron :)
patreon.com/modustrialmaker
// FOLLOW ME
• Instagram: @modustrialmaker - goo.gl/F4UdEs
• Blog: modustrialmaker.com
//ROCKLER WOODWORKING: PRODUCTS I USE
Deluxe Panel Clamps: https://rb.gy/t02k5
Parallel Bar Clamps: https://rb.gy/lv9x8
Rockler Glue Kit: http://bit.ly/2wlqh5F
Pro-lift Router Lift: bit.ly/3jgbPSC
Router Table Top: bit.ly/3ykjxiM
Router Table Fence: bit.ly/38i09Zm
Router Table Stand: http://bit.ly/2SWKg2f
Mobile Dust Collector: bit.ly/38iS2vn
F clamps: https://88t1.short.gy/Rk3dkZ
Bench cookie Connect: https://88t1.short.gy/VNTgIO
// TOTAL BOAT
High Performance (2:1) Epoxy Resin: http://bit.ly/2uMsaEE
Marine Varnish: bit.ly/2ymr3k2
// HARVEY INDUSTRIAL BAND SAW
Alpha HW615: https://rb.gy/56hsf
I needed to build some barn doors for my master bedroom closets because my dog kept getting into my clothes. I had this idea to super-size the woven cutting board concept, and essentially make two giant edge grain cutting boards to function as doors.
// JACKERY
Jackery Solar Generator 3000 Pro starts Open Sale on Mar 27th, available on Jackery's official website, Amazon Store and Home Depot. Use the code 'SG3000PRO' to enjoy massive discounts of $223.9 OFF on the Explorer 3000 Pro and $319.9 OFF on the bundle– Solar Generator 3000 Pro ( Validity period: Mar 20-April 30)
Jackery official store: bit.ly/3F65u6I
Jackery Amazon: amzn.to/3JrquaM
Jackery on Home Depot: thd.co/3Frdhw1
// PATREON - Support the channel by becoming a Patron :)
patreon.com/modustrialmaker
// FOLLOW ME
• Instagram: @modustrialmaker - goo.gl/F4UdEs
• Blog: modustrialmaker.com
// HARVEY INDUSTRIAL BAND SAW
Alpha HW615: https://rb.gy/56hsf
//ROCKLER WOODWORKING PRODUCTS I USE
Deluxe Panel Clamps: https://rb.gy/t02k5
Parallel Bar Clamps: https://rb.gy/lv9x8
Barn door hardware: https://88t1.short.gy/jfFKOX
Mobile Dust Collector: bit.ly/38iS2vn
Rockler Glue Kit: http://bit.ly/2wlqh5F
F clamps: https://88t1.short.gy/Rk3dkZ
Bench cookie Connect: https://88t1.short.gy/VNTgIO
// TOTAL BOAT
Wood honey: bit.ly/3v9kX1G
// ARIAT WORK
Save 10% off your first Ariat order - bit.ly/3DfML8N
My Ariat Favorites - bit.ly/3xe6K3K
Get your customized Ariat gear here - bit.ly/3eK6eUQ
#woodworking
#cuttingboard
#barndoor
Thanks to Ariat Work, Rockler Woodworking, and Total Boat for being amazing sponsors of this channel!x to build some barn doors for walk-in closets. Check out JACKERY solar generators and use the CODE: 'SG3000PRO' for huge discounts: bit.ly/3F65u6I (MORE DETAILS BELOW)
I needed to build some barn doors for my master bedroom closets because my dog kept getting into my clothes. I had this idea to super-size the woven cutting board concept, and essentially make two giant edge grain cutting boards to function as doors.
// JACKERY
Jackery Solar Generator 3000 Pro starts Open Sale on Mar 27th, available on Jackery's official website, Amazon Store and Home Depot. Use the code 'SG3000PRO' to enjoy massive discounts of $223.9 OFF on the Explorer 3000 Pro and $319.9 OFF on the bundle– Solar Generator 3000 Pro ( Validity period: Mar 20-April 30)
Jackery official store: bit.ly/3F65u6I
Jackery Amazon: amzn.to/3JrquaM
Jackery on Home Depot: thd.co/3Frdhw1
// PATREON - Support the channel by becoming a Patron :)
patreon.com/modustrialmaker
// FOLLOW ME
• Instagram: @modustrialmaker - goo.gl/F4UdEs
• Blog: modustrialmaker.com
// HARVEY INDUSTRIAL BAND SAW
Alpha HW615: https://rb.gy/56hsf
//ROCKLER WOODWORKING PRODUCTS I USE
Deluxe Panel Clamps: https://rb.gy/t02k5
Parallel Bar Clamps: https://rb.gy/lv9x8
Barn door hardware: https://88t1.short.gy/jfFKOX
Mobile Dust Collector: bit.ly/38iS2vn
Rockler Glue Kit: http://bit.ly/2wlqh5F
F clamps: https://88t1.short.gy/Rk3dkZ
Bench cookie Connect: https://88t1.short.gy/VNTgIO
// TOTAL BOAT
Wood honey: bit.ly/3v9kX1G
// ARIAT WORK
Save 10% off your first Ariat order - bit.ly/3DfML8N
My Ariat Favorites - bit.ly/3xe6K3K
Get your customized Ariat gear here - bit.ly/3eK6eUQ
#woodworking
#cuttingboard
#barndoor
Thanks to Ariat Work, Rockler Woodworking, and Total Boat for being amazing sponsors of this channel!
// PATREON - Support the channel by becoming a Patron :)
patreon.com/modustrialmaker
// FOLLOW ME
• Instagram: @modustrialmaker - goo.gl/F4UdEs
• Blog: modustrialmaker.com
// ARIAT WORK
BOGO 50% OFF Sale: https://88t1.short.gy/oVOE4Y
Save 10% off your first Ariat order - bit.ly/3DfML8N
My Ariat Favorites - bit.ly/3xe6K3K
Get your customized Ariat gear here - bit.ly/3eK6eUQ
#renovation
#beforeandafter
#abandonedbuilding
Thanks to Ariat Work, Rockler Woodworking, and Total Boat for being amazing sponsors of this channel!
As one of the last parts of my abandoned building renovation, I broke the bank for my bathroom barn doors with some gorgeous bookmatched live edge maple slabs. We do some live edge woodworking with the slabs to make an epoxy resin river split down the middle of the two bookmatched slabs to make two barn doors. This is a twist on the river table trend that I have not seen before, and there are some darn satisfying epoxy pours in this one. But, things also go off the rails… will we be able to recover and save the doors? Watch to find out!
Oh, and I also show how to install barn door hardware for the double barn doors.
This project was one of the last loose ends to complete my abandoned building renovation, which means....full (formerly) abandoned building tour is coming soon!
// PATREON - Support the channel by becoming a Patron :)
patreon.com/modustrialmaker
// FOLLOW ME
• Instagram: @modustrialmaker - goo.gl/F4UdEs
• Blog: modustrialmaker.com
// ARIAT WORK
BOGO 50% OFF Sale: https://88t1.short.gy/oVOE4Y
Save 10% off your first Ariat order - bit.ly/3DfML8N
My Ariat Favorites - bit.ly/3xe6K3K
Get your customized Ariat gear here - bit.ly/3eK6eUQ
// ROCKLER PRODUCTS
Barn door hardware: https://88t1.short.gy/jfFKOX
Portable drill press: https://88t1.short.gy/YN8XxW
F clamps: https://88t1.short.gy/Rk3dkZ
Bench cookie Connect: https://88t1.short.gy/VNTgIO
// TOTAL BOAT
Thick Set epoxy resin: http://bit.ly/31TDqOK
High Performance (2:1) Epoxy Resin: http://bit.ly/2uMsaEE
Wood honey: bit.ly/3v9kX1G
// OTHER PRODUCTS
Double-sided door handle: amzn.to/3YJndba
#woodworking
#epoxyresin
#rivertable
Thanks to Ariat Work, Rockler Woodworking, and Total Boat for being amazing sponsors of this channel!
We start by explaining what parametric design is and how it can take your woodworking to the next level. This is a great woodworking tip, and this DIY stair railing is a great example of how powerful parametric design can be for woodworking. We also show how to make the steel frame for the staircase - welding the steel frame in place, and talking proper safety measures while welding at the job site.
// PATREON - Support the channel by becoming a Patron :)
patreon.com/modustrialmaker
// FOLLOW ME
• Instagram: @modustrialmaker - goo.gl/F4UdEs
• Blog: modustrialmaker.com
// ARIAT WORK WORKWEAR
Save 10% off your first Ariat order - bit.ly/3eDabdP
My Ariat Favorites - bit.ly/3eJWTw1
Get your customized Ariat gear here - bit.ly/3RC2djH
#woodworkingtip
#woodworking
#renovation
#parametricdesign
#interiordesign
This time I’m building an urban decay DIY concrete lamp. I’m mixing Karma’s ashes with the concrete so that the lamp serves as a tribute to him…something I’ll always remember him by. I built the concrete form from melamine, and used wet sand to create a void in the concrete for an urban decay look. I also welded a rebar frame from which is exposed between the two halves of the concrete lamp. I ran the wiring for the LED light bulb fixture through PVC pipe, then poured the concrete over the PVC, so that the wiring for the LED light would be hidden inside the lamp. To finish off the lamp, I used some basic woodworking techniques to build a walnut wood base for the lamp.
// ARIAT WORK WORKWEAR
Save 10% off your first Ariat order - bit.ly/3eDabdP
My Ariat Favorites - bit.ly/3eJWTw1
Get your customized Ariat gear here - bit.ly/3RC2djH
// THERMOMETER GUN: amzn.to/3HQx6ig
// LED DNA BULB: amzn.to/3G4iU47
// PATREON - Support the channel by becoming a Patron :)
patreon.com/modustrialmaker
// FOLLOW ME
• Instagram: @modustrialmaker - goo.gl/F4UdEs
• Blog: modustrialmaker.com
// CONCRETE LINKS
• Fishstone HP50 concrete mix: http://bit.ly/2YL4MFA
• Fishstone Concrete Recipes: http://bit.ly/2srpxtI
• Sprayer (aka hopper gun): http://bit.ly/2SqdhmO
• Collomix Mixer: bit.ly/3fr8TDl
• Collomix Water Doser: amzn.to/3y07wlb
• Acrylic Polymer: http://bit.ly/2SRQQHk
• Alkali Resistant (AR) glass fibers: amzn.to/31y6kEe
• Cake Fondant Tool for perfect edges: http://amzn.to/2w0JCVx
• U-Seal Sealer: amzn.to/3SYSCVs
• Helical Mixing Paddle: amzn.to/2GFyxjF
• Concrete mixer: http://amzn.to/2kEnZFi
• Concrete pigments: http://bit.ly/2GxzWrf
• 1-part concrete sealer: http://amzn.to/2xW7Gth
• Black 100% Silicone Caulk: http://amzn.to/2B64iRY
• Paste Finishing Wax: http://amzn.to/2kF565e
// ROCKLER WOODWORKING PRODUCTS
Clamp-It Corner Clamps: http://bit.ly/3HRaQFk
Pro-lift Router Lift: bit.ly/3jgbPSC
Router Table Top: bit.ly/3ykjxiM
Router Table Fence: bit.ly/38i09Zm
Router Table Stand: http://bit.ly/2SWKg2f
//TOTAL BOAT EPOXY RESIN
Marine Spar Varnish: bit.ly/2ymr3k2
2:1 High Performance Epoxy: http://bit.ly/2uW7m11
#concrete
#diyconcrete
#concreteideas
00:00 Introduction
00:23 Design of Concrete Lamp
01:24 Building the Melamine Form
02:58 Alternative Epoxy Concrete Lamp Design
04:12 Welding Rebar Frame
05:29 Adding Sand, Rebar, and Electrical to Form
06:37 Jackery AD READ
08:56 Concrete Pour / Karma cat Tribure
10:40 Walnut Wood Base
13:03 Demolding Concrete Lamp
14:51 Beauty Shots & Outro
We start this master bathroom renovation with demolition, framing, plumbing, etc. then get to the finishes. I installed the tiles in the huge curbless walk-in shower, build the concrete countertop and sink, build the vanity cabinet, install a feature wall around the tub, and basically just create the (mostly) DIY bathroom of my dreams.
Note: I say "mostly" DIY because I hired out the rough plumbing and electrical, as well as the rough framing and walls.
// SUPPORT ME on PATREON
patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
// SHOWER NICHE: amzn.to/3uGJTw0
In this abandoned building renovation question and answer session, I'll address how much this renovation has cost, do a general life update (including what happened to Kat and the Karma cat), and discuss the future of the channel after the renovation.
/ SUPPORT ME on PATREON
patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
//ARIAT WORK
Ariat Black Friday Deals (11/23 - 11/27) - bit.ly/3ArOKEA
Ariat Cyber Monday Deals (11/28 - 11/29) - bit.ly/3AsLokH
//KAT’S CHANNEL: bit.ly/3lQVEuo
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
My friend Bart had this live edge wood slab just sitting out in his yard in the rain, rotting, for a couple years. I decided to save it and make a live edge river mirror with backlighting from LED strips. This was a really fun woodworking project, and is part of the master bathroom renovation at my abandoned building project. We used my CNC to flatten the live edge slab, then rip cut the live edges to form the edges of the mirror. I also cut channels in the back to the wood to create a space for LED strips to provide really cool backlighting behind the mirror. We then installed the mirror over the bathroom vanity, to finish of the bathroom renovation.
// JONNY BUILDS: youtube.com/c/JonnyBuilds
// (BART) KOMAR PROJECT YouTube: bit.ly/31Yv3Dx
// PATREON
• Support the channel - patreon.com/modustrialmaker
// FOLLOW ME
• Instagram: @modustrialmaker - goo.gl/F4UdEs
• Blog: modustrialmaker.com
// GRIDLOCK TABLE: http://bit.ly/3XlwZkn
// ROCKLER WOODWORKING PRODUCTS
T-Track: http://bit.ly/2Ilk2Ca
T-Track Clamp: http://bit.ly/2oOjcH5
T-Track Omni Stop: bit.ly/3inFw3f
//TOTAL BOAT
Marine Spar Varnish: bit.ly/2ymr3k2
2:1 High Performance Epoxy: http://bit.ly/2uW7m11
// COB LED Strip (4000K):
from China bit.ly/3wdvKI8
Amazon amzn.to/3wpCrWA
// AVID CNC
Website: bit.ly/32V2sys
CHAPTERS
00:00 Introduction
01:55 Flattening the Live Edge Slab
03:57 Epoxy Resin Pour
05:38 SimpliSafe Ad Read
07:01 Ripping the Live Edge Mirror Frame
09:46 Routing Channels for LED strips
11:27 Floating Bracket Installation for Mirror
15:26 Beauty Shots of Live Edge Mirror
I am coming to terms with the fact I have hoarder tendencies, and need to get organized so I can finish the abandoned building renovation. So we made a list of four DIY storage and organization projects and set about fixing things. First, I build a DIY plywood bookshelf (with a twist). I also installed Ikea closets, finished building out the linen closet cabinet, and added shelving in the third bedroom / camera room.
// SUPPORT ME on PATREON
patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
//ROCKLER PRODUCTS I USE
Portable Drill Guide: bit.ly/3gNcHPH
Cabinet Pocket Door Slides: bit.ly/3gRDhaw
Cabinet Pocket Door Full Overlay Hinges: bit.ly/3Dcqc36
Pro-lift Router Lift: bit.ly/3jgbPSC
Router Table Top: bit.ly/3ykjxiM
Router Table Fence: bit.ly/38i09Zm
Router Table Stand: http://bit.ly/2SWKg2f
//TOTAL BOAT
Danish Teak Sealer: bit.ly/3zri3qm
#storage
#hoarder
#organization
00:00 Introduction
01:30 Bookshelf design and build
05:07 Skull Bliss ad read
07:03 Bookshelf Assembly
08:02 Ikea Closet Build & Install
09:26 Linen Cabinet Pocket Door Install
12:19 Camera Room Storage & Organization
12:48 Bookshelf Doubles as Media Center
15:47 Before & After Reveal
This time I am undertaking the seemingly impossible challenge of completely renovating the third and final bathroom in the abandoned building in under 24 hours. We’ll be attempting to install hardwood flooring, install shiplap paneling and trim, paint, build floating shelves, install the vanity and toilet...all in a 24 hour period. Can we make it?
Bonus, for the floating shelves in this bathroom renovation, we’ll be using the shou sugi ban technique… check it out for some bathroom makeover inspiration. And as always, let me know what you think in the comments!
// ARIAT WORK
- Save 10% off your first order when you sign up via this link: bit.ly/3kbBwBe
- My Ariat favorites: bit.ly/2ZBKal0
// SUPPORT ME on PATREON
patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
//TOTAL BOAT 4-MINUTE EPOXY: bit.ly/3EsqPrr
//KAT’S CHANNEL: bit.ly/3lQVEuo
#bathroom
#renovation
#BenjaminMoore
#SeeTheLove
#Ad
#bathroomrenovation
#remodel
#bathroommakeover
This DIY concrete ramp sink is the last major project for the master bathroom renovation (just waiting on some cabinet hardware to put the finishing touches on and do the full reveal). The sink is fabricated from GFRC concrete, as usual, but this one is a little bit extra - probably my favorite concrete sink build ever. I designed the sink in Fusion 360, and then used my Avid CNC to 3D carve the foam sink mold. I coated the foam sink mold in drywall mud (which acts as a barrier between foam and epoxy resin) and then coated the mold with epoxy resin to waterproof it and give a smooth surface to it. I sprayed the face or beauty coat of GFRC concrete into the form, and then hand packed the back coat of concrete. We end the video with the installation of the sink in the master bathroom, on top of the vanity that I build in the last video.
NEXT UP: In the next episode, we’ll be doing a 24-hour bathroom renovation challenge….the last major project I have to do before wrapping up the building!
// VIDEO CHAPTERS
00:00 Introduction
00:51 Concrete Sink Design
01:48 Making the Foam Sink Mold on CNC
05:01 Epoxy Resin Coating the Sink Mold
08:17 Noom ad read
10:03 Melamine Form
12:55 Spraying GFRC concrete
14:42 Hand-packed Glass Fiber Concrete Backer Coats
15:09 Demolding and Sealing Concrete Sink
16:58 Installing the Concrete Sink & Countertop
// PATREON - Support the channel by becoming a Patron :)
patreon.com/modustrialmaker
// FOLLOW ME
• Instagram: @modustrialmaker - goo.gl/F4UdEs
• Blog: modustrialmaker.com
// CONCRETE LINKS
• Fishstone HP50 concrete mix: http://bit.ly/2YL4MFA
• Fishstone Concrete Recipes: http://bit.ly/2srpxtI
• Sprayer (aka hopper gun): http://bit.ly/2SqdhmO
• Collomix Mixer: bit.ly/3fr8TDl
• Collomix Water Doser: amzn.to/3y07wlb
• Acrylic Polymer: http://bit.ly/2SRQQHk
• Alkali Resistant (AR) glass fibers: amzn.to/31y6kEe
• Cake Fondant Tool for perfect edges: http://amzn.to/2w0JCVx
• U-Seal Sealer: amzn.to/3SYSCVs
• Helical Mixing Paddle: amzn.to/2GFyxjF
• Concrete mixer: http://amzn.to/2kEnZFi
• Concrete pigments: http://bit.ly/2GxzWrf
• 1-part concrete sealer: http://amzn.to/2xW7Gth
• Black 100% Silicone Caulk: http://amzn.to/2B64iRY
• Paste Finishing Wax: http://amzn.to/2kF565e
// EPOXY LINKS
GET 15% OFF TOTAL BOAT EPOXY with the CODE: “MODUSTRIAL” when purchased through http://www.jamestowndistributors.com
Table Top Epoxy: bit.ly/3l9oxQI
Mixol Pigments: http://bit.ly/2UYpXEm
Torch: amzn.to/2XEp2ug
// AVID CNC
Website: bit.ly/32V2sys
#renovation
#concretesink
#diy
#Noom #Noomfluencer
It is time to make the final push to finish the abandoned building renovation. It’s been a while since we did an update tour, so this video I’ll do a walk through tour to go over everything we still need to do to pass inspection and get my building re-zoned as a mixed use building. And in the main action this time, we continue the renovation of the master bathroom, by building a vanity and linen closet. To make the vanity cabinet and linen closet, I’m using my Avid CNC.
// SUPPORT ME on PATREON
patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
// ROCKLER HARDWARE & PRODUCTS
- JIG-IT Hinge Drilling System: bit.ly/3i10wMB
- Blum Soft Close Hinges: bit.ly/3w5BvWP
- Blum Undermount Drawer Slides: bit.ly/3143WZJ
- Cabinet Pocket Door System: bit.ly/3eqfpJG
- Edgebanding Machine: bit.ly/3l8OJxW
- Workbench Vise: bit.ly/3DVF3xW
// TOTAL BOAT TABLETOP EPOXY: bit.ly/3eqfpJG
// REHAU CABINET DOOR MATERIAL: rehau.com/us-en/rauvisio-terra
00:00 Introduction
00:47 Master Bathroom Cabinet Design
02:07 CNC Cut Parts for Vanity + Linen Closet
04:51 Building Update Tour
09:27 NordVPN ad read
11:24 Edgebanding Cabinet Parts
12:34 Spraying Finish on Cabinets
13:44 CNC Cabinet Doors
15:46 Building Drawer Boxes
17:04 Installing Built-in Vanity Cabinet & Linen Closet
I needed a break from the renovation projects, so I decided to build something I've had in my head for a while... a DIY blue concrete fire table / fire pit. We built a concrete form from melamine, and cut out foam knockouts on my X-Carve CNC. I then used a glass fiber reinforced (GFRC) concrete mix with a blue oxide pigment, and sprayed a face coat of the concrete. I added the glass fibers to the backer concrete mix, and hand paced it in. And lastly we dropped in a gas fire pit insert and lit it up.
/ PATREON - Support the channel by becoming a Patron :)
patreon.com/modustrialmaker
// FOLLOW ME
• Instagram: @modustrialmaker - goo.gl/F4UdEs
• Blog: modustrialmaker.com
// VIDEO CHAPTERS
00:00 Introduction
00:46 Making the Concrete Form
01:20 Cutting Foam Knockouts on CNC
03:38 Assembling the Melamine Form
06:58 BetterHelp ad read
08:37 Spraying the GFRC Face Coat
11:02 Hand Packing the GFRC Backer Coat
13:01 Demolding the Fire Table
14:22 Sanding & Sealing the Concrete Fire Table
17:46 Installing the Fire Pit Insert
18:56 Beauty Shots of Concrete Fire Table
// CONCRETE LINKS
• Fishstone HP50 concrete mix: http://bit.ly/2YL4MFA
• Fishstone Concrete Recipes: http://bit.ly/2srpxtI
• Blue & white concrete pigments: http://bit.ly/2GxzWrf
• Acrylic Polymer: http://bit.ly/2SRQQHk
• Alkali Resistant (AR) glass fibers: amzn.to/31y6kEe
• Cake Fondant Tool for perfect edges: http://amzn.to/2w0JCVx
• U-Seal Sealer: amzn.to/3SYSCVs
• Helical Mixing Paddle: amzn.to/2GFyxjF
• Concrete mixer: http://amzn.to/2kEnZFi
• Concrete pigments: http://bit.ly/2GxzWrf
• 1-part concrete sealer: http://amzn.to/2xW7Gth
• Black 100% Silicone Caulk: http://amzn.to/2B64iRY
• Paste Finishing Wax: http://amzn.to/2kF565e
#diy #concrete #firepit
The abandoned building roof deck needed some more green, so I build a DIY planter box from cedar lumber and white GFRC concrete. I think the integrated white concrete bench really takes this raised planter box to the next level. As always, I’m using Fishstone’s GFRC concrete products to make the bench super thin. And for the lumber, I went with 4” cedar boards.
// ROCKLER ONE-HANDED BAR CLAMP: bit.ly/3otXi7t
// SUPPORT ME on PATREON
patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
// CONCRETE LINKS
• Fishtone High Performance Concrete Recipes: http://bit.ly/2srpxtI
• Fishtone HP50 concrete mix: http://bit.ly/2YL4MFA
• Acrylic Polymer: http://bit.ly/2SRQQHk
• Alkali Resistant (AR) glass fibers: amzn.to/31y6kEe
• Cake Fondant Tool for perfect edges: http://amzn.to/2w0JCVx
• Helical Mixing Paddle: amzn.to/2GFyxjF
• Concrete mixer: http://amzn.to/2kEnZFi
• Concrete pigments: http://bit.ly/2GxzWrf
• 1-part concrete sealer: http://amzn.to/2xW7Gth
• Black 100% Silicone Caulk: http://amzn.to/2B64iRY
• Paste Finishing Wax: http://amzn.to/2kF565e
• “From Scratch” GFRC Recipes: goo.gl/35RvFM
// OTHER TOOLS USED IN THE BUILD
Pocket Hole Jig: amzn.to/3J600JQ
Outdoor Pocket Hole Screws: amzn.to/3cwu2dC
18V Cordless Miter Saw: amzn.to/3cwu2dC
Thanks to Rockler Woodworking for being a 2022 channel sponsor.
#planterbox
#diy
#woodworking
00:00 Introduction
00:47 Cutting Cedar Cladding Boards
02:17 Cutting 2x4 Lumber for Frame
04:24 Assembling the Planter Box
06:17 Simplisafe Ad
07:37 Assembling the Planter Box (cont.)
09:40 Planter Box Liner
11:07 Planting Trees with Soilless Mix
12:30 Form for Concrete Bench
14:52 Pouring White Concrete Mix
16:37 Polishing Concrete
18:34 Beauty Shots of Planter Box
As part of the bathroom renovation, I show how to build a wood slat feature wall as a bath tub surround. The wood slat feature wall also includes a floating shelf and LED strips to take it to the next level!
// SUPPORT ME on PATREON
patreon.com/modustrialmaker
// TOTAL BOAT PRODUCTS
Marine Varnish: bit.ly/2ymr3k2
High Performance Epoxy: http://bit.ly/2uMsaEE
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
00:00 Intro
00:58 Lumber Shopping
01:51 Milling Lumber
02:58 Cutting Wood Slats
04:00 Finishing Wood Slats
05:03 Helix Sleep ad read
07:06 Floating Shelf Build
09:11 Painting Background for Feature Wall
12:47 Installing Supports for Wood Slats
13:16 Installing Wood Slats
14:32 Installing Floating Shelf
16:15 Finishing Slat Wall Installation
18:55 Tiling Backsplash of Floating Shelf
20:02 Installing LED strips
24:05 Beauty Shots of LED Wood Slat Wall
#woodslatwall
#LED
#helixsleep
For the renovation of my master bathroom in the (formerly) abandoned building, I used a variety of tile sizes, including 12x24 large format porcelain tile, 24x24 large format porcelain tile, and a granite mosaic tile. This video shows how to do entire tile installation process for this massive bathroom. The bathroom includes a massive curbless walk-in shower, and a fresstanding tub.
NOTE: We used granite mosaic tiles on the shower floor, and I forgot to mention that I will be sealing these tiles - a must for granite in a shower!
#bathroomrenovation #tile #bathroomdesign
#Noom #Noomfluencer
In this episode of my abandoned building renovation, I show how to build a really simple DIY pendant light or chandelier, with no wires showing, for your kitchen island. I made the light fixture out of aluminum C-channel and welded the aluminum with no welder - just using an easy DIY brazing process. I used chip on board (COB) LED strips in the pendant light. The COB LED strips are great because they give a continuous line of light…no dots! I then used strips of acrylic as a diffuser for the LED strips, and a threaded lamp pipe to hang the light fixture and hide the wires.
00:00 Intro
00:18 Cutting Aluminum C Channel
01:26 Welding Aluminum with a Welder (Brazing)
04:41 Making the Acrylic Diffusers
06:18 SimpliSafe ad
07:41 Lamp Rods for Hanging Pendant Light
10:50 Painting the Pendant Light
11:08 Installing LED strips
13:06 Assembling the Pendant Light
14:30 Making Ceiling Mounting Plate
15:13 Installing Pendant Light Fixture
15:57 Beauty Shots
16:12 Cost Breakdown and Outro
// SUPPORT ME on PATREON
patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
// MATERIAL & TOOL LINKS
MAP / Propane Gas Torch: amzn.to/3NbAkMJ
Aluminum Brazing Rods: amzn.to/39gcukp
3/4” Aluminum C-channel: thd.co/3l79g5h
COB LED Strip (4000K):
from China bit.ly/3wdvKI8
Amazon amzn.to/3wpCrWA
36” Threaded Lamp Pipe
Inexpensive bit.ly/39SJxLz
Amazon amzn.to/3wbr2uD
Acrylic: ebay.to/3wcgU4X
LED Driver: amzn.to/3FJIw4u
Miter Saw box: amzn.to/3LbNoAv
Metal hack saw: amzn.to/3LdNPKL
LED Controller:
Amazon: amzn.to/3L8qj1y
Cheap (ships from China): bit.ly/3LlZPKg
// SAW STOP TABLE SAW
This kitchen renovation started back in 2020 when I bought this abandoned building in Chicago. 2 years later, and I’m ready to reveal the full modern industrial kitchen buildout. This video includes the entire kitchen renovation process, including demolition, installing hardwood floors, building kitchen cabinets, and installing the cabinets and cabinet hardware. And finally, at the end we’ve got a full cost breakdown and the kitchen reveal tour!
// SUPPORT ME on PATREON
patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
// REHAU DOORS AND DRAWER FRONTS
Rauvisio Noir Matte Panels bit.ly/3LEprTu
// ROCKLER HARDWARE & PRODUCTS
- Double Pull Out Trash Cabinet Hardware: bit.ly/3i1INEY
- Blum Soft Close Hinges: bit.ly/3w5BvWP
- Blum Undermount Drawer Slides: bit.ly/3143WZJ
- Edgebanding Machine: bit.ly/3l8OJxW
- Workbench Vise: bit.ly/3DVF3xW
- Drawer Front Installation Clamps: bit.ly/3pWKmIH
- JIG-IT Hinge Drilling System: bit.ly/3i10wMB
// CONCRETE LINKS
• Fishtone High Performance Concrete Recipes: http://bit.ly/2srpxtI
• Fishtone HP50 concrete mix: http://bit.ly/2YL4MFA
• Acrylic Polymer: http://bit.ly/2SRQQHk
• Alkali Resistant (AR) glass fibers: amzn.to/31y6kEe
• Cake Fondant Tool for perfect edges: http://amzn.to/2w0JCVx
• Helical Mixing Paddle: amzn.to/2GFyxjF
• Concrete mixer: http://amzn.to/2kEnZFi
• Concrete pigments: http://bit.ly/2GxzWrf
• 1-part concrete sealer: http://amzn.to/2xW7Gth
• Black 100% Silicone Caulk: http://amzn.to/2B64iRY
• Paste Finishing Wax: http://amzn.to/2kF565e
• “From Scratch” GFRC Recipes: goo.gl/35RvFM
// AVID CNC
Website: bit.ly/32V2sys
Thanks to Rockler Woodworking for being a 2022 channel sponsor, to Rehau for providing me with the doors and drawer fronts, and to Tom at Fishstone for providing the concrete products I use. These companies have provided me products at no cost, which I use in this video.
/ SUPPORT ME on PATREON
patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// ARIAT WORK
- Save 10% off your first order when you sign up via this link: bit.ly/3kbBwBe
- My Ariat favorites: - bit.ly/2ZBKal0
- Work Sweatpants: bit.ly/36QzbL1
- Work Sweatshirt: bit.ly/3NGLGcS
// DONATE TO ROZAM for UKRAINE
gofund.me/413ebb5d
(Note: if you have not used a GoFundMe for a non-profit, please rest assured that 100% of the funds you send via the GoFundMe are delivered directly to the charity -- GoFundMe is just a vehicle for delivering the funds.)
SUB TO ANDREI's CHANNEL:
youtube.com/channel/UCqLrSgEVdPURIEWGSeSj5cQ
FOLLOW BART'S CHANNEL (KOMAR PROJECT):
• YouTube: bit.ly/31Yv3Dx
• Instagram: @komarproject : bit.ly/2Z6tIZA
A huge thanks to all the doctors, nurses, and other staff at Emory St. Joseph hospital in Atlanta. Without you, I wouldn't be here today. There is no way to repay someone for saving your life, so all I can do is tell you that I'm forever grateful for the care you gave me.
// SUPPORT ME on PATREON
patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
The industrial modern kitchen renovation in my abandoned building to home conversion is almost done. This time, I show how to install cabinet cover panels and fillers in the kitchen, how to install drawer fronts, and how install the cabinet doors and toe kicks. And for the grand finale, we install hardware for two pull-out pantries, which will provide a ton of storage!
// SUPPORT ME on PATREON
patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
// ROCKLER HARDWARE & PRODUCTS
- Drawer Front Installation Clamps: bit.ly/3pWKmIH
- JIG-IT Hinge Drilling System: bit.ly/3i10wMB
- Quick Lever Aluminum Clamps: bit.ly/3t3EpKH
- Double Pull Out Trash Cabinet Hardware: bit.ly/3i1INEY
- Blum Soft Close Hinges: bit.ly/3w5BvWP
- Blum Undermount Drawer Slides: bit.ly/3143WZJ
// VIX BIT: amzn.to/3t4ArTp
//RATCHETING MINI SCREWDRIVER: amzn.to/3HXMrdu
Thanks to Rockler Woodworking for being a 2022 channel sponsor. This company has provided me products at no cost, which I use in this video.
As part of my kitchen renovation in the abandoned building, I wanted something to fit with the concrete countertop in my DIY kitchen island, so I built this diagonal side grain butcher block countertop from hard maple. This is a relatively easy woodworking project. I milled up the maple lumber then glued it up using my Rockler woodworking clamps. Then it was a matter of routing a groove in the countertop, so it fit into the concrete portion. I love how the warmth of the wood ties the whole kitchen renovation together.
//MICHAEL ALM: youtube.com/c/MichaelAlm
// SUPPORT ME on PATREON
patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
// ROCKLER HARDWARE & PRODUCTS
- Bar Clamps: bit.ly/3sdAThm
- Quick Lever Aluminum Clamps: bit.ly/3t3EpKH
- Mobile Dust Collector: bit.ly/38iS2vn
- Omni-stop for T-Track (on CNC): bit.ly/3inFw3f
- T-track clamp: http://bit.ly/2oOjcH5
- Rockler Glue Kit: http://bit.ly/2wlqh5F
// TOTAL BOAT WOOD HONEY: bit.ly/3v9kX1G
// SUPPORT ME on PATREON
patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// FOLLOW KAT!!
• YouTube: bit.ly/2Z5zCu7
• Instagram: @kat_liepins_art : bit.ly/3lQVEuo
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
// ROCKLER HARDWARE & PRODUCTS
// ARIAT WORK
Save 10% off your first order when you sign up via this link: bit.ly/3kbBwBe
Also, check out my Ariat favorites here: - bit.ly/2ZBKal0
// FISHSTONE CONCRETE
• HP50 concrete mix: http://bit.ly/2YL4MFA
• Acrylic Polymer: http://bit.ly/2SRQQHk
• Al
kali Resistant (AR) glass fibers: amzn.to/31y6kEe
• Cake Fondant Tool for perfect edges: http://amzn.to/2w0JCVx
• Helical Mixing Paddle: amzn.to/2GFyxjF
• Concrete mixer: http://amzn.to/2kEnZFi
• Concrete pigments: http://bit.ly/2GxzWrf
• 1-part concrete sealer: http://amzn.to/2xW7Gth
• Black 100% Silicone Caulk: http://amzn.to/2B64iRY
• Paste Finishing Wax: http://amzn.to/2kF565e
• “From Scratch” GFRC Recipes: goo.gl/35RvFM
PICTURE STONE GRANITE: www.picturestoneinc.com
Yup, I failed to meet the goal of completing the kitchen renovation by Christmas. But we gotta focus on the positive - I got the european style kitchen cabinets installed. Also, we've got a sneak peak at fabricating the concrete countertops that will be in the next video.
// SUPPORT ME on PATREON
patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// FOLLOW STU (@yellowmuginc)
instagram.com/yellowmuginc?utm_medium=copy_link
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
// ROCKLER HARDWARE & PRODUCTS
- Adjustable Leveling Legs: bit.ly/3HcFjdl
- Undermount Drawer Slides: bit.ly/3143WZJ
- Jig for Undermount Slides: bit.ly/32n6Jy7
- Soft Close Hinges: bit.ly/3w5BvWP
- Finger pulls: bit.ly/3BxUkCZ
- Mobile Dust Collector: bit.ly/38iS2vn
// GRABO ELECTRIC SUCTION CUPS: amzn.to/3cUn0wl
// REHAU CABINET DOORS: bit.ly/3p6HR54
#renovation
#kitchenrenovation
#cabinets
This is the 3rd video in the kitchen renovation series in my abandoned building. In it, Rehau uses their space age tools to manufacture the doors and drawer fronts for all of my kitchen cabinets.
// REHAU CABINET DOORS: bit.ly/3p6HR54
/ ARIAT WORK - see PINNED COMMENT for CONTEST DETAILS
Black Friday Deals (11/24 - 11/30) - bit.ly/3HmZF4t
Cyber Monday Deals (11/29) - bit.ly/31YaBoM
If you miss the sale, you can still save 10% off your first order here: bit.ly/3ehS21s
My favorites from Ariat Work are here: bit.ly/3eoUF1E
// SUPPORT ME on PATREON
patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
#renovation
#kitchenrenovation
#kitchenremodel
This is the 2nd video in the kitchen renovation series in my abandoned building. In it, I build the kitchen cabinet carcasses using my CNC. The cabinet doors are being fabricated offsite, and I’ll show the manufacture of the cabinet doors in a second video.
// SUPPORT ME on PATREON
patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
// ROCKLER PRODUCTS
- Edgebanding Machine: bit.ly/3l8OJxW
- Workbench Vise: bit.ly/3DVF3xW
- Mobile Dust Collector: bit.ly/38iS2vn
// GRABO ELECTRIC SUCTION CUPS: amzn.to/3cUn0wl
// REHAU CABINET DOORS: bit.ly/3p6HR54
// AVID CNC
Website: bit.ly/32V2sys
#renovation
#kitchenrenovation
#kitchenremodel
This is the first video in the kitchen renovation series in my abandoned building, which I just found out was apparently a nightclub just before it was abandoned. First I had to finalize the kitchen design using a 3D model. Then I had to transfer the model to Mozaik software, which allows me to make the cabinets on my Avid CNC. Then we figure out how the heck we are going to use the CNC to make all the DIY kitchen cabinets, and make the lumber run to get all the plywood necessary for the cabinets.
// SUPPORT ME on PATREON
patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
// ROCKLER CABINET HARDWARE
- Mobile Dust Collector: bit.ly/38iS2vn
- Undermount Drawer Slides: bit.ly/3143WZJ
- Soft Close Hinges: bit.ly/3w5BvWP
- Finger pulls: bit.ly/3BxUkCZ
- Pull-out Pantry Hardware: bit.ly/2ZAoOHe
I was feeling a bit frustrated with the kitchen design for the abandoned building renovation, so I decided to step back for an easy win, to get my head back in the game...so we installed the baseboard trim in the hallway, and painted the new doors and trim. Once that is done, it is time for an updated abandoned building tour focusing on the finished hallway and updates to the renovated guest bathroom, which now has shower glass and mirror installed.
// PATREON
Support us on Patreon: patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// FOLLOW ME
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
// FOLLOW KAT
YouTube: youtube.com/c/KatLiepinsArt
Instagram: @kat_liepins_art - instagram.com/kat_liepins_art
// JAKE'S INSTAGRAM: @renovatejake - instagram.com/renovatejake
#renovation
#BenjaminMoore
#SeeTheLove
Bonus: This DIY coffee table was made during a mega collab with @Kiptoe, Ten Hundred, and Austin from @Red Bud Builds - and Ten Hundred and Kiptoe painted an epic mural in the abandoned building garage!
RENOVATION UPDATE NOTE: this video was filmed back in August. It just took 8 weeks before my schedule synced up with Ten Hun’s so I could make delivery…. Don’t worry, I’ve been hard at work on the building renovation over the last month! :) Lots more renovation content dropping in the next 2 weeks!
So you get two for the price of one with the whole process of painting the mural in the abandoned building included as well!
We started this epoxy resin coffee table by slabbing the old maple stump. This stump was found at the abandoned building when I first moved in. We flattened the stump on my big CNC, and then did the Ten Hundred inlay by doing a layered inlay technique, using my handheld CNC (Shaper origin). If you like satisfying epoxy pours, well, this video has a lot of them! :)
// ARIAT WORK
Save 10% off your first order when you sign up via this link: bit.ly/3kbBwBe
Also, check out my Ariat favorites here: - bit.ly/2ZBKal0
//MURAL PRINTS: tenhundredart.com/prints
// TEN HUNDRED
Mural Collaboration Video: youtu.be/aTvK6HHdzRw
Ten Hundred’s channel: youtube.com/c/TenHundred
// KIPTOE
Mural Collaboration Video: youtube.com/watch?v=ITGdGHZwstc
Kiptoe’s channel: youtube.com/c/Kiptoe
// RED BUD BUILDS
Austin’s slab table vid: youtu.be/HevsTE2XYVk
Red Bud Builds channel: youtube.com/channel/UCp9NPCHuD7GzK5SHrPLj34g
// PATREON \\
Support me on Patreon - patreon.com/modustrialmaker
// MODUSTRIAL MERCH
Shirts and more in the Modustrial Store: bit.ly/3wLkxMb
// ROCKLER TOOLS
- Mobile Dust Collector: bit.ly/38iS2vn
- Omni Stop for T-track: bit.ly/3inFw3f
- T-track: amzn.to/3igDUZ9
// TOTAL BOAT
High Performance Epoxy Resin (inlays): bit.ly/3olvhA9
Table Top epoxy: bit.ly/3l9oxQI
4 minute epoxy tube: bit.ly/3zVIkKX
//AVID CNC
DIY CNC Routers: bit.ly/32V2sys
//SEMI-EXACT DIY TABLE LEGS
Spider legs: bit.ly/3kUZZho
// FOLLOW ME \\
Instagram: @modustrialmaker - goo.gl/F4UdEs
Blog: modustrialmaker.com
// SHAPER ORIGIN - HANDHELD CNC: http://bit.ly/30rPhBW