How to make a traditional style jointer plane part 1Sumokun2012-04-14 | In this series I show you how I made a traditional style wooden jointer plane using another, more stable lamination method.
This part is a general overview and description of parts needed.Drilling bench dog holes & F-Type drill bit mini reviewSumokun2016-12-01 | I was drilling some holes for the dogs/holdfasts in my bench with some F-type drill bits so I thought I'd give my thoughts on how they perform.Workshop update & various giftsSumokun2016-11-17 | A quick update on the current situation and a display of the awesome gifts some generous viewers have sent me.Restoring a Japanese chisel (nomi)Sumokun2015-03-10 | This is a quick demonstration of restoring a used Japanese chisel in fair condition.Sharpening guides I use and recommendSumokun2014-11-02 | This is a quick look at the sharpening guides that I use. I would also recommend these if you are looking for some and are unsure on which to get.Restoring a kanna part 3/3Sumokun2014-09-22 | In this series I go through some additional steps you may need to perform on a used Japanese plane in order to bring it to good working condition. This is a supplement to my kanna tuning videos.Restoring a kanna part 2/3Sumokun2014-09-22 | In this series I go through some additional steps you may need to perform on a used Japanese plane in order to bring it to good working condition. This is a supplement to my kanna tuning videos.Restoring a kanna part 1/3Sumokun2014-09-22 | In this series I go through some additional steps you may need to perform on a used Japanese plane in order to bring it to good working condition. This is a supplement to my kanna tuning videos.How to tune up a kanna part 3Sumokun2012-11-18 | In this series I show you how to tune up/prepare a Japanese plane (kanna) so that it will be ready for use. This covers "flat" planes (smoother, jointers etc) and it is more geared towards the smoothers since they require the most precision and fettling.
This part covers the tuning the sole, fitting the chip-breaker and I show you the results of the final plane.How to tune up a kanna part 2Sumokun2012-11-17 | In this series I show you how to tune up/prepare a Japanese plane (kanna) so that it will be ready for use. This covers "flat" planes (smoother, jointers etc) and it is more geared towards the smoothers since they require the most precision and fettling.
This part covers the tuning/scraping of the bed of the plane. This assumes you have a properly prepared blade. The how-to for this can be found in this video: http://youtu.be/9SOlywCvTJ4How to tune up a kanna part 1Sumokun2012-11-17 | In this series I show you how to tune up/prepare a Japanese plane (kanna) so that it will be ready for use. This covers "flat" planes (smoother, jointers etc) and it is more geared towards the smoothers since they require the most precision and fettling.
This part is an introduction. The first thing you want to do when tuning a plane is to prepare the blade which can be found in this video: http://youtu.be/9SOlywCvTJ4How to prepare a kanna bladeSumokun2012-11-10 | In this video I show you how to prepare a kanna blade. This is usually the first step in tuning up a kanna. It covers flattening the back, tapping out, adjusting the chipbreaker, grinding the mimi, and some tips on sharpening.Tips on choosing your first kanna (Japanese plane) part 2Sumokun2012-10-01 | In this little series I show you what to look for in choosing your first kanna and also give you some recommendations.
This part covers the blade and dai.Tips on choosing your first kanna (Japanese plane) part 1Sumokun2012-09-30 | In this little series I show you what to look for in choosing your first kanna and also give you some recommendations.
This part covers pricing and options you have, steels and backing iron choices, and chipbreakers.How to convert a Polaroid 900 to use packfilm pt.19Sumokun2012-09-09 | A little series showing how to convert a Polaroid 900 roll film camera to use the current Fuji instant peel-apart films.
This is the final part where I show you the finished camera.How to convert a Polaroid 900 to use packfilm pt.18Sumokun2012-09-09 | A little series showing how to convert a Polaroid 900 roll film camera to use the current Fuji instant peel-apart films.
The final things to do are to do something about the right side of the camera and to make a latch for the left side door.How to make a marking gauge part 4Sumokun2012-05-06 | In this series I show you how to make a marking gauge based on a French design. The design was originally published in Popular Woodworking but I have modified the plans to use a blade instead of a pin and added a radius on the arm to make it more robust. This marking gauge is a good beginners project because it results in a very useful tool and requires minimal skill and tooling to make.
This is the final part and I finish up the wedge and shape the body plus I show you the gauge in action.How to make a marking gauge part 3Sumokun2012-05-06 | In this series I show you how to make a marking gauge based on a French design. The design was originally published in Popular Woodworking but I have modified the plans to use a blade instead of a pin and added a radius on the arm to make it more robust. This marking gauge is a good beginners project because it results in a very useful tool and requires minimal skill and tooling to make.
In this part I cut and shape the end cap for the blade screw in the end of the arm and start the wedge.How to make a marking gauge part 2Sumokun2012-05-05 | In this series I show you how to make a marking gauge based on a French design. The design was originally published in Popular Woodworking but I have modified the plans to use a blade instead of a pin and added a radius on the arm to make it more robust. This marking gauge is a good beginners project because it results in a very useful tool and requires minimal skill and tooling to make.
Here I cut the mortises in the body, shape the arm and make the blade.How to make a marking gauge part 1Sumokun2012-05-05 | In this series I show you how to make a marking gauge based on a French design. The design was originally published in Popular Woodworking but I have modified the plans to use a blade instead of a pin and added a radius on the arm to make it more robust. This marking gauge is a good beginners project because it results in a very useful tool and requires minimal skill and tooling to make.
This video is an introduction and shows the marking out needed for the mortises.How to make a traditional style jointer plane part 6Sumokun2012-04-21 | In this series I show you how I made a traditional style wooden jointer plane using another, more stable lamination method.
This is the final part and I flatten the sole and show you some test shavings.How to make a traditional style jointer plane part 5Sumokun2012-04-20 | In this series I show you how I made a traditional style wooden jointer plane using another, more stable lamination method.
With the tote roughed out, I glue it in and finish cleaning it up, put chamfers on the body and make the wedge.How to make a traditional style jointer plane part 4Sumokun2012-04-20 | In this series I show you how I made a traditional style wooden jointer plane using another, more stable lamination method.
Now I glue up the halves, clean up the throat and make the tote.How to make a traditional style jointer plane part 3Sumokun2012-04-20 | In this series I show you how I made a traditional style wooden jointer plane using another, more stable lamination method.
Here I finish chopping out the throat area and get ready to glue up the two halves.How to make a traditional style jointer plane part 2Sumokun2012-04-14 | In this series I show you how I made a traditional style wooden jointer plane using another, more stable lamination method.
Here I mark out the throat and start chopping out the waste.Tuning up a Japanese chisel p1Sumokun2011-12-31 | In this quick series I show you how to get a brand new Japanese chisel (nomi) ready for work. That goes from setting the hoop to flattening the back and sharpening.Replacing the bearings in a Stanley 813 braceSumokun2011-12-31 | This is a quick video on how I replaced the bearings in the chuck of a Stanley 813 brace. There were a bunch of balls missing when I got it and I replaced them with 1/8" diameter stainless balls. It works awesome now!Tuning up a Japanese chisel p2Sumokun2011-12-31 | In this quick series I show you how to get a brand new Japanese chisel (nomi) ready for work. That goes from setting the hoop to flattening the back and sharpening.Building a traditional style wooden plane pt.9Sumokun2011-11-27 | In this series of videos I build a traditionally styled wooden jack plane using a Krenov type lamination method.
In the final video I show you how to add some decorative chamfers along the top edges and also make the wedge. You'll also be able to see the finished plane take some shavings from walnut.Building a traditional style wooden plane pt.7Sumokun2011-11-27 | In this series of videos I build a traditionally styled wooden jack plane using a Krenov type lamination method.
Now its time to glue up the pieces and then make the tote.Building a traditional style wooden plane pt.8Sumokun2011-11-27 | In this series of videos I build a traditionally styled wooden jack plane using a Krenov type lamination method.
Here I show you how I made the tote and glue it in the mortise in the body.Building a traditional style wooden plane pt.6Sumokun2011-11-27 | In this series of videos I build a traditionally styled wooden jack plane using a Krenov type lamination method.
As a continuation of the previous video, I start chopping out the wear. I also taper the side walls down for easier access to the shavings.Building a traditional style wooden plane pt.5Sumokun2011-11-27 | In this series of videos I build a traditionally styled wooden jack plane using a Krenov type lamination method.
After marking, we need to start to chop the mouth/throat area out. First a bunch of saw kerfs are made then chopped out. I also show and explain the throat geometry in more detail since it is easier to visualise at this stage.Building a traditional style wooden plane pt.4Sumokun2011-11-27 | In this series of videos I build a traditionally styled wooden jack plane using a Krenov type lamination method.
With the bed and abutment surfaces trued up we need to mark the toe block for chopping out of the throat. The geometry isn't too complicated and its not all that critical but you should take care to mark accurately so its nice and neat.Building a traditional style wooden plane pt.3Sumokun2011-11-27 | In this series of videos I build a traditionally styled wooden jack plane using a Krenov type lamination method.
Here I true up the bed and toe piece surfaces after the sawing out. I also talk a little about the wood I use and about the lamination method.Building a traditional style wooden plane pt.2Sumokun2011-11-26 | In this series of videos I build a traditionally styled wooden jack plane using a Krenov type lamination method.
In this part I show you the initial marking out that needs to be done and the cutting of the center block is done.Building a traditional style wooden plane pt.1Sumokun2011-11-26 | In this series of videos I build a traditionally styled wooden jack plane using a Krenov type lamination method.
This part is just an introduction.Wood River No.4 Smoother Plane Review part 4/4Sumokun2011-05-21 | This is a review of the version 3 Wood River No.4 plane. This is the final part and I take some shavings after I fully tune up the plane. This is a really nice plane, especially for the price!Wood River No.4 Smoother Plane Review part 3/4Sumokun2011-05-21 | This is a review of the version 3 Wood River No.4 plane. In this part I take some shavings straight out of the box and then with just a hone of the blade.Wood River No.4 Smoother Plane Review part 2/4Sumokun2011-05-21 | This is a review of the version 3 Wood River No.4 plane. This part takes a look at the parts of the plane and the finish of it.Wood River No.4 Smoother Plane Review part 1/4Sumokun2011-05-21 | This is a review of the version 3 Wood River No.4 plane. This part is a quick look over the plane as it comes out of the box.How to convert a Polaroid 900 to use packfilm pt.17Sumokun2011-01-30 | A little series showing how to convert a Polaroid 900 roll film camera to use the current Fuji instant peel-apart films.
With the infinity in tune, we have to do the closer distances. Here is the process to do that.How to convert a Polaroid 900 to use packfilm pt.16Sumokun2011-01-30 | A little series showing how to convert a Polaroid 900 roll film camera to use the current Fuji instant peel-apart films.
We now have to start tuning the focus. To do that we have to first get infinity locked down.Wood River Low Angle Block Plane Review part 2/2Sumokun2011-01-23 | This is a review of the version 2? Wood River low angle block plane. Its the one with the knuckle cap.
I take you from opening the box though initial shavings to shavings with a hone of the blade to a full tune up.
Overall I am impressed with this plane and its pretty good value for money.Wood River Low Angle Block Plane Review part 1/2Sumokun2011-01-23 | This is a review of the version 2? Wood River low angle block plane. Its the one with the knuckle cap.
I take you from opening the box though initial shavings to shavings with a hone of the blade to a full tune up.
Overall I am impressed with this plane and its pretty good value for money.How to convert a Polaroid 900 to use packfilm pt.15Sumokun2010-11-28 | A little series showing how to convert a Polaroid 900 roll film camera to use the current Fuji instant peel-apart films.
I now attach the back and show you how to seal it.
I also show you my solution to the right side of the camera. Most people just cut the end off but I decided to go for a grip.How to convert a Polaroid 900 to use packfilm pt.14Sumokun2010-11-23 | A little series showing how to convert a Polaroid 900 roll film camera to use the current Fuji instant peel-apart films.
Here I seal the spacer with liquid rubber and I show you how to create a template for leather cutting and applying it.How to convert a Polaroid 900 to use packfilm pt.13Sumokun2010-11-23 | A little series showing how to convert a Polaroid 900 roll film camera to use the current Fuji instant peel-apart films.
I show you where I painted the body and smoothed the areas for the leather.
I also show you how to clean the finder.How to convert a Polaroid 900 to use packfilm pt.12Sumokun2010-11-23 | A little series showing how to convert a Polaroid 900 roll film camera to use the current Fuji instant peel-apart films.
Here I show how to mark the back door for cutting so you can use it to cover up the hole on the left of the camera.How to convert a Polaroid 900 to use packfilm pt.11Sumokun2010-11-23 | A little series showing how to convert a Polaroid 900 roll film camera to use the current Fuji instant peel-apart films.
Here I show how to remove all the stuff from the back door to get it ready for cutting and reattaching.