Uploaded March 2026 | Updated September 2026, 1 week ago
If your RV fridge lights are on but it is not cooling and you cannot hear the compressor running, this video walks through the key troubleshooting steps for the FCR16DCASA Furrion refrigerator.
Learn how to diagnose common issues that cause a refrigerator to appear powered on but not actually operate. The first step is performing a hard reset to clear a possible lockout condition. If the refrigerator still does not run after the reset, the video explains how to continue troubleshooting the system safely and effectively.
You will see how power flows through the refrigerator, starting with incoming power and moving to the control board located on top of the unit. From there, the guide explains how to access and test the compressor control module by removing the rear panel and checking the three-pin connector for proper continuity.
This video also covers how to verify wiring orientation for the hot and neutral connections and why incorrect wiring can prevent the compressor from starting. If the control module checks out, the next step is evaluating the compressor itself by measuring amp draw on the power wire.
You will learn what different amp readings can indicate, including:
• Possible blown fuse
• Low refrigerant flow
• Normal operating amp range
• Signs that the compressor motor may be locked up
By following these troubleshooting steps, you can better determine why your RV fridge is not cooling and identify whether the issue is related to the control module, wiring, or the compressor.
This guide is designed to help RV owners and technicians diagnose refrigerator problems on the FCR16DCASA Furrion refrigerator with clear, practical steps.
Shop our store at lippert.com/rv-camping/appliances/refrigerators
For technical resources and support, visit support.lci1.com/, and don’t forget to subscribe to our channel!
#lippert #furrion #rvfridge #troubleshooting
If your RV fridge lights are on but it is not cooling and you cannot hear the compressor running, this video walks through the key troubleshooting steps for the FCR16DCASA Furrion refrigerator.
Learn how to diagnose common issues that cause a refrigerator to appear powered on but not actually operate. The first step is performing a hard reset to clear a possible lockout condition. If the refrigerator still does not run after the reset, the video explains how to continue troubleshooting the system safely and effectively.
You will see how power flows through the refrigerator, starting with incoming power and moving to the control board located on top of the unit. From there, the guide explains how to access and test the compressor control module by removing the rear panel and checking the three-pin connector for proper continuity.
This video also covers how to verify wiring orientation for the hot and neutral connections and why incorrect wiring can prevent the compressor from starting. If the control module checks out, the next step is evaluating the compressor itself by measuring amp draw on the power wire.
You will learn what different amp readings can indicate, including:
• Possible blown fuse
• Low refrigerant flow
• Normal operating amp range
• Signs that the compressor motor may be locked up
By following these troubleshooting steps, you can better determine why your RV fridge is not cooling and identify whether the issue is related to the control module, wiring, or the compressor.
This guide is designed to help RV owners and technicians diagnose refrigerator problems on the FCR16DCASA Furrion refrigerator with clear, practical steps.
Shop our store at lippert.com/rv-camping/appliances/refrigerators
For technical resources and support, visit support.lci1.com/, and don’t forget to subscribe to our channel!
#lippert #furrion #rvfridge #troubleshooting
