Uploaded April 2016 | Updated September 2026, 1 week ago
The sweet spot Endbell timing for 1S Lipo , 13.5T Blinky (Locked) Racing.
Setting the timing with a 1S lipo is difficult , but setting with a 2S Lipo gives the same Sweetspot result.
After setting to about 6amps on 2S, the 1S will draw about 4 amps.
This normally corresponds to about 50-54 degree endbell timing.
I show how to use a multimeter and clampmeter to check the amp draw.
The sweet spot Endbell timing for 1S Lipo , 13.5T Blinky (Locked) Racing.
Setting the timing with a 1S lipo is difficult , but setting with a 2S Lipo gives the same Sweetspot result.
After setting to about 6amps on 2S, the 1S will draw about 4 amps.
This normally corresponds to about 50-54 degree endbell timing.
I show how to use a multimeter and clampmeter to check the amp draw.
