How To Make 3D Printed Pin Badges at Home (3D print and Epoxy Cast) LazerLord10 2021-06-13 | In which I show you the process I went through to make DIY enamel-looking pin badges with cheap materials. Usually enamel pin badges require expensive machines and a large minimum order quantity, but if you can make them at home, you can make small batches that look pretty good!Chapters:0:00 Introduction0:16 Artwork1:22 3D Model3:27 3D Print5:32 Paint6:32 CastingThe dragon artwork was originally a piece by Notidee on twitter! They make pretty cool art, check them out: twitter.com/Notideeart For thinning the 2 part epoxy, in a 40ml batch, I found that 3ml of 100% isopropyl alcohol worked the best for diluting it. Usually I just mix the resin, then add the thinning agent until it's slightly more viscous than water. As mentioned in the video, do not do this if you intend on using the epoxy for structural applications.The dyes are simple alcohol dyes made specifically for 2 part epoxies. I recommend finding opaque pigments instead, as the results I got from the transparent dyes ended up looking like candy.If you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment. Don't forget to leave a rating on the video, as it helps me out a lot. Website: http://Lazerlord.comTwitter: twitter.com/Lazerlord10 Thingiverse: thingiverse.com/Lazerlord/about
Serpentine Belt & Idler Bearing Change (2015-2020 Honda Fit/Jazz) LazerLord10 2021-01-09 | In which I replace the serpentine/accessory belt on a 3rd generation Honda Fit/Jazz.This video shows the process required to change the serpentine/accessory beth and the idler bearing on a 3rd generation (2015-2020) Honda Fit/Jazz. The total parts list only totals about $30 for the belt an the bearing. I don't really recommend changing the bearing. The whole reaon I changed this belt and the bearing was that the Fit starter to make a weird noise, and it sounded like a belt/pulley. Turns out it was just low on oil even though the digital oil life meter said it was good... nice.Parts----Serpentine belt: K060431 amazon.com/gp/product/B000C2YCM8Idler Bearing: Size 6203: amazon.com/gp/product/B07SR3FZRCIdler pulley with bearing: No idea if this is legit aliexpress.com/i/33057346689.htmlIf you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment. Don't forget to leave a rating on the video, as it helps me out a lot. Twitter: twitter.com/Lazerlord10 Website: http://Lazerlord.com
Building my Stealthy Workstation (and saving $130) LazerLord10 2020-06-24 | This computer is horribly outdated! But it still works great, and I learned that one-way mirrors on side panels need to become a thing.As mentioned in the video, I save $130 by frequenting reddit.com/r/buildapcsales and also by buying a used CPU; those things don't really wear out and I saved $10.I did do benchmarking and an attempt at overclocking, but those didn't really get me anywhere and the video was getting long enough as it was. In case you didn't realize, this has been sitting in the editing booth for almost two years! It's not that I put 2 years of effort in to this, but rather I haven't had the combination of motivation and time to get it finished.Oh, and here's the one way mirror material. I linked what I bought so you know what I used, but it's unavailable right now. Just find something similar (non-affiliated): amazon.com/gp/product/B07DN6RB8YI hope you found this video useful!If you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment. Don't forget to leave a rating on the video, as it helps me out a lot. Twitter: twitter.com/Lazerlord10 Website: http://Lazerlord.com
764 days. Its been a while... A.K.A. Where were you? LazerLord10 2020-01-01 | Crazy man talks to self while running from thunderstorm on local beach.Why I don't show my face: youtu.be/ux55RjN2mgEA vaguely self-reflective video to throw to the internet before the decade rolls over. This is essentially an 'I'm not dead yet!' video, and hopefully sheds a little bit of light as to why I've been absent for over 700 days. As mentioned, explaining in detail the stuff I've been doing will only serve to harm my future personal endeavors, so I don't go in to detail to avoid that. I hope you understand. Apart from that, Hopefully I'll start making at least one video every two months or so, but who knows how busy I'll end up being in 2020 and beyond. Hopefully I have enough time to keep this hobby up, but nothing is guaranteed. Anyways, happy new year!Also, this is as close as you'll get to me doing a vlog. Second Channel: Lazerlord20 youtube.com/channel/UChKNHOajNd-9TjlMRl5k4Cw Twitter: twitter.com/Lazerlord10 Thingiverse: thingiverse.com/Lazerlord/about Website: http://Lazerlord.comPhotography: ? (I need a place to put them)
Racing Quadcopter: First Season of Flying (FPV edit) LazerLord10 2017-11-27 | Yes, I know I do too many flips. Favorite Section is at 7:14In this video, you'll see a few notable pieces of footage that I've recorded with my racing quadcopter. I started flying in early july, and I flew roughly 3 packs every weekend between then and the end of August. It has been a lot of fun, with a lot less crashes that I expected, and I can't wait until I can get out to fly again!There might be a tutorial video coming out about how I built this quadcopter, but it's not set in stone and there are already great resources out there that I can't match. That video may end up being a video about unexpected problems that arose.Music used (in order of appearance):Approaching Nirvana - Frontier - youtube.com/watch?v=h6REakwoZaQApproaching Nirvana - Avila - youtube.com/watch?v=5emWu155dYEIf you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, as it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: thingiverse.com/Lazerlord/aboutWebsite: http://Lazerlord.com
Cheap Laser Engraver Review: EleksLaser-A3 Pro 2500mW [PINNED COMMENT: UPDATE] LazerLord10 2017-11-01 | Yes, Lazerlord finally has a laser, but how good is it? I want you to know what this machine would be like if you got it, so pay attention to the video images!---READ MORE FOR LINKS AND UPDATED INFORMATION---How good is it? Well, it's about as good as you'd expect. It won't cut much, it will etch nearly anything that can burn, and it has reasonable detail. It would also be trivial to add your own tools to the end of this and make a plotter or other type of CNC machine. I may do that in the future, so stay tuned!Buy this machine (discounted Nov. 1-11!): goo.gl/NEmjw33D models for this laser: thingiverse.com/Lazerlord/collections/eleks-laserLaserGRBL firmware: github.com/gnea/grbl/wiki/Compiling-GrblLaserGRBL configuration for this machine: Copy-paste the following code into the laserGRBL Gcode terminal when connected (I couldn't find an easy way to change these in the configuration file):$1 = 255$3 = 1$32 = 1$100 = 80$101 = 80$102 = 80$110 = 25000$111 = 25000$120 = 5000$121 = 3000$130 = 380$131 = 300If you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, as it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: thingiverse.com/Lazerlord/aboutWebsite: http://Lazerlord.com
Custom 3D Printed USB Holder (Aligning Models, Sand Filling, GCode mods.) LazerLord10 2017-09-10 | Multiple processes in Cura? Adding pauses and beeps? Filling prints with sand? Making 3D models? Yes!I made some pretty uncommon modifications to this popular 3D model, and I think it turned out quite well!Original 3D model: thingiverse.com/thing:46335My customized models: thingiverse.com/thing:2527395Learn about gcode: http://reprap.org/wiki/G-codeMeshmixer application: http://www.meshmixer.comRepetier Host application: repetier.comCura Application: ultimaker.com/en/products/cura-softwareIf you're lazy and just want to copy the code to do the beeps and 2 minute pause, here you go. Just put it at the lend of a layer:;PAUSE PRINT for fillingG0 X0 Y0M300 S300 P1000G4 S1M300 S300 P1000G4 S1M300 S300 P1000G4 S1M300 S300 P1000G4 S1M300 S300 P1000G4 S1M300 S300 P1000G4 S1M300 S300 P1000G4 S1M300 S300 P1000G4 S1G4 S120;Beep before resuming printM300 S300 P1000G4 S1M300 S300 P1000G4 S1M300 S300 P1000G4 S1M300 S300 P1000G4 S1M300 S300 P1000If you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, as it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: http://www.thingiverse.com/Lazerlord/aboutWebsite: http://lazerlord.com
Convert Images to 3D Models (Line-Art to Path Tutorial) LazerLord10 2017-07-27 | In which I describe how to convert a bitmapped image to a path that Fusion 360 can use to make 3D models. It may not be the best way, but it sure beats having to trace out the pattern!Step-by-step:- Insert image into GIMP and use the Threshold option in the color menu to get a black and white image if you don't already have one.- Export as PNG- Import that image into Inkscape and select "Path - Trace bitmap"- Delete the bitmap image from Inkscape- Save as SVG- Start sketch in Fusion- Import SVG- Done!- Have pizzaTools you will need: - Gimp image editor (VERY useful for other things) : gimp.org/downloads- Inkscape : inkscape.org/en/download- Fusion 360 (You probably already have it) : autodesk.com/products/fusion-360/overview?mktvar002=698238&mkwid=sfZbQCulc|pcrid|193265048606|pkw|fusion%20360|pmt|e|pdv|c|&&gclid=CPqE-9GTqtUCFc-Cswod28cB-Q Source of information: forums.autodesk.com/t5/fusion-360-design-validate/importing-svg-files-as-sketches/td-p/4534941If you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, as it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: http://www.thingiverse.com/Lazerlord/aboutdeviantArt: http://lazerlord10.deviantart.com
Moments From the Half Lives (Silly Compilation) LazerLord10 2017-07-18 | Use coupon code "LAZER" at checkout to get 15% off your first purchase at radiator.com^Don't actually do that.I had a lot of footage floating around on my computer, and I had to clear it out. That's basically the reason I made this silly video.This video's style is similar to that of Danny2642 here on youtube! If you want to see videos in this style that are a bit better, check him out: youtube.com/user/Danny2462Music used from http://incompetech.com/music/royalty-free/music.html :-Fluffing a duck-Quirky Dog-Spy Glass-Two Finger JohnnyIf you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, as it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: http://www.thingiverse.com/Lazerlord/aboutWebsite (Likely incomplete): http://Lazerlord.com
Net Neutrality LazerLord10 2017-07-12 | On Feb. 4, 2015, Wheeler confirmed that he would use Title II to give internet users the strongest protections possible. The full Commission approved his proposal on Feb. 26 — marking the *biggest victory for the public interest in the FCC's history*.Now, under President Trump, FCC Chairman Ajit Pai is doing everything he can to dismantle Net Neutrality. Speak out now to reject any attacks on the open internet.Inform yourself: en.wikipedia.org/wiki/Net_neutralityTAKE ACTIONStarting page with videos at bottom: battleforthenet.comWrite a comment to the FCC: fcc.gov/ecfs/search/proceedings?q=name:((17-108))Contact your congressperson: Send an email or call your representative and urge them to support net neutrality http://www.house.gov/representatives/findSend this to your senator and representative:Subject: I am against the "Restoring Internet Freedom" actDear [Name of person]:Please support any amendment that would strike out Sections 628, 629 and 630 from the Government Appropriations. These sections would undermine the FCC's Net Neutrality rules and prevent the agency from enforcing these critical protections. It is unacceptable to use a budget bill to circumvent the FCC's open rulemaking process that millions of citizens participated in.The American people have called for strong net neutrality rules. Congress should let the FCC do its job, and not engage in unproductive partisan brinkmanship.Thank you,[Your name here]Petition: act.credoaction.com/sign/Pai-netneutralitySubreddit: reddit.com/r/KeepOurNetFreeElectronic Frontier Foundation: eff.orgAmerican Civil Liberties Union: aclu.orgCenter for Democracy: cdt.orgFight for the Future: fightforthefuture.orgThe Onion Router: torproject.org
Mewtwo Pokemon Figure 3D Printed: Tutorial (Orientation and Support) LazerLord10 2017-06-09 | In which I show you the process that happens between downloading a model and printing it. Orientation in Meshmixer, support structure settings, and then the final print! There are probably better ways of doing all this, but this is what I found to be the easiest way of getting a complex model to successfully print on my Folger Tech FT-5I don't do any 3D modeling in this video, but I really want to learn more about organic 3D modeling, so maybe I'll do a bit more of that in the future.TheCreatorx3D Patreon (where teh 3D model is): patreon.com/TheCreatorx3DJoel's YouTube channel (3D Printing Nerd): youtube.com/channel/UC_7aK9PpYTqt08ERh1MewlQMusic used:soundcloud.com/maxvic/exciting-driving-on-a-highway-deep-house-background-free-downloadsoundcloud.com/maxvic/serenityIf you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, as it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: http://www.thingiverse.com/Lazerlord/aboutdeviantArt: http://lazerlord10.deviantart.com
Ultra-Cheap Gaming PC: Better than youd think ($190 total cost) LazerLord10 2017-05-27 | Gaming PC's are normally super expensive, but they don't have to be! In this video, I take an 8 year old computer and add a few components in order to get it to play more modern games.Of course, something like this isn't very common to find, but if you keep your eyes peeled, you may find a gem like this! It's the old optiplex 980 by Dell, and it works great!I could have made this a lot cheaper if I didn't include bluetooth, wifi, and a hard drive, but I want this computer to actually be usable, not just cheap. I probably could have built it for less than $150 if I did that, but some features are almost needed. I probably would have left some features out if I'm going to use it in the future, but it's going off to a friend, and I don't know how he'll be using it, so I added more standard features.Total parts list and cost:* Dell Optiplex 980 with 255W PSU, i7 870, 16GB 1333MHz DDR3 RAM, and case - $15* Test GPU - $5* Well-used GTX 750 TI - $65* SD card reader - $10* 1TB Hard Drive - $50* 128GB Crucial M4 SSD from a friend - $20* Wifi card - $17* USB bluetooth adapter - $7Total Cost: $189Music Used:soundcloud.com/maxvic/calm-electronic-royalty-freesoundcloud.com/maxvic/bouncing-relaxing-modern-fashionIf you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, as it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: http://www.thingiverse.com/Lazerlord/aboutdeviantArt: http://lazerlord10.deviantart.com
What is the Smallest Number? (Vsauce fan-made compilation) LazerLord10 2017-05-08 | 0.000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000...3This was made from video all the way back to 2011. Lots of videos were watched!
Custom 3D printed YOUTUBE PLAY BUTTON for 50K Subscribers! (3DP#03) LazerLord10 2017-04-07 | YouTube won't send me a play button for 50,000 subscribers, so I figured I'd make one for myself, ha! ----## READ MORE FOR DOWNLOAD LINKS AND ADDITIONAL INFORMATION ##-----3D Model I designed: http://www.thingiverse.com/thing:2222204-Fusion 360 (just say you're a student ;): http://www.autodesk.com/products/fusion-360/overview?mktvar002=698238&mkwid=szK6QE0U2|pcrid|177331758407|pkw|fusion%20360|pmt|e|pdv|c|&&gclid=Cj0KEQjwwoLHBRDD0beVheu3lt0BEiQAvU4CKhRyY-sAmoBIR35yDPokSg9S867OGo1bNXsZUuZHNvQaAntN8P8HAQ---### MUSIC ###---All music is by Mike Stellman (M-cubed), he's got great stuff!-soundcloud.com/mcubedmusic-First song: Flippant: youtube.com/watch?v=7enK-zq2hJI-Second song: Grump: youtube.com/watch?v=w_mqupbWBugIf you go to his channel and sub, let him know I sent you :)If you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, as it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: http://www.thingiverse.com/Lazerlord/aboutdeviantArt: http://lazerlord10.deviantart.com
50,000 Subscriber Special! (Room Tour & YouTube Rambling) LazerLord10 2017-04-03 | Here it is; the "big" 50,000 subscriber special! To be honest, It's not that special, but hey, it's a new video! Those don't happen very often!---## READ MORE FOR MORE INFORMATION ##---Yup, on April 2nd, I surpassed 50,000 subscribers here on YouTube. While most of these are from my Minecraft timelapses, and at least 20% of them are probably dead accounts, the number still says 50,000! Overall, this video is a little bit like a show-and-tell with some random thing I find while walking around the house. The structure isn't great, but hey, I had to get this video out ASAP!Other footage in this is mainly from random videos I had lying around on my hard drive. The drone may look in good shape, but that was footage from over 5 months ago. I'll definitely want to rebuild it at some point. As for the electric scooter project, I need at least another 2 months in order to get that thing complete. Mounting the motor is the hardest part! If you have any ideas, let me know (no friction drive, please!).If you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, as it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: http://www.thingiverse.com/Lazerlord/aboutdeviantArt: http://lazerlord10.deviantart.com
Make Timelapses with Free Software and NO TRIAL VERSIONS (Tutorial) LazerLord10 2017-01-13 | In which I go through step-by-step in the process of installing and using the free software I use to make great timelapses with a sequence of still images or video clips.----[ READ MORE FOR LINKS ]----VirtualDub Download - http://virtualdub.sourceforge.netXvid Video Codec - xvid.com/downloadVirtualDub FFMpeg Input Plugin - http://codecpack.co/download/FFInputDriver.html(If any of these links break, please let me know!)If you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, as it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: http://www.thingiverse.com/Lazerlord/aboutdeviantArt: http://lazerlord10.deviantart.com
How I Made the Skyblock Timelapse (Minecraft setup for two clients on one computer) LazerLord10 2017-01-07 | This video shows you what I did in order to create the second Skyblock Timelapse. It covers the mods used, the setup for getting two clients running in one map on one computer, the video editing software, and the recording software.LINKS TO ALL THE THINGS MENTIONED:optifine mod: http://optifine.net/downloadspixelCam mod: http://www.minecraftforum.net/forums/mapping-and-modding/minecraft-mods/2327429-pixelcam-camera-studio-for-minecraft-1-8-and-1-9miecraft forge: files.minecraftforge.netFraps: http://www.fraps.comVitualDub: http://virtualdub.orgHandbrake: https://handbrake.fr/Sony Movie Studio: http://www.vegascreativesoftware.com/us/vegas-movie-studio-platinumIf you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, as it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: http://www.thingiverse.com/Lazerlord/aboutdeviantArt: http://lazerlord10.deviantart.com
Minecraft Timelapse: SkyBlock Redux (4K 60fps) LazerLord10 2016-12-30 | Watch 40 hours of Survival Minecraft gameplay in one stunning 25 minute video. It’s the ever-popular SkyBlock custom survival map, and needless to say, much more was done than just survival in this video.**READ MORE FOR DOWNLOADS/MUSIC/FAQ**The original SkyBlock survival map: http://www.minecraftmaps.com/survival-maps/skyblockDownload this completed map (Upper right for ZIP): drive.google.com/file/d/0B3slmFjP9CXnTWNfdThuZEdDVXM/view?usp=sharing&resourcekey=0-QByRJglMv_Hwsqrqft6Gjg_________________________________________________If you have questions or suggestions (after reading the FAQ of course), feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, as it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: http://www.thingiverse.com/Lazerlord/aboutDeviantArt (likely empty): http://lazerlord10.deviantart.com_________________________________________________Music used (not in order of appearance):Music by Approaching Nirvana: Approaching Nirvana YouTube channel: youtube.com/user/ApproachingNirvana8:04 Ilu Village | Buy on iTunes: http://apple.co/1YnRyLD20:05 From the Edge of the Cliffs | Buy on iTunes: http://apple.co/1YnRyLD11:53 Go Wait Fall | Buy on iTunes: http://apple.co/1GLSMXQ5:33 Bangers and Smashed (Remastered) | Free download: http://bit.ly/1NU5veoMusic by Ninety9Lives:Channel: http://99l.tv/SubscribeAlbum Download Link: http://99l.tv/GoldenGun0:00 100 Day Delay & Goodbye Gravity – Drift | Video Link: http://99l.tv/Drift15:32 Hyve – Stories | Video Link: http://99l.tv/Stories_________________________________________________F.A.Q. (Frequently Asked Questions):-How long did this take? 40 hours of recorded footage, but there is likely 10-20 hours more in AFK farming, another 10 in editing, 8 to render, and 12 to upload. So yeah, about 85 hours total :) I only spent 3 months on this one, mainly because I actually worked at it a little bit more than the previous one, lol.-What song was that? Did you read the music list?!?!?!-Was this all in survival? Yup.-What version of Minecraft was this? 1.8.-Will you make another one? Probably not, unfortunately. By the end of this one, I was really tired of playing the map and just going through the process in general. I won’t stop YouTube all together, of course, but I likely won’t make Minecraft videos any more. It seems to just get more and more difficult. Also, I would assume that YouTube is pretty well saturated with Minecraft videos.-How did you record this? Fraps was used to record the screen, and to play, I had a LAN world started with two accounts logged in from the same computer. See the next FAQ entry for more details.-How did you produce this video? I made a behind the scenes video here -＞youtube.com/watch?v=TpYJT8cFUZU-How much has this been sped up? Most of the time it’s 30-60 times faster than real time, but certain section (like the cobble stone generation) were sped up 240 times.-Where did you get all the cobble stone? Right at the start you can see I place some lava and water, and where they meet, it makes cobblestone. If you mine this stone, it comes back soon after. Do that for a few dozen hours and you’ll get a few dozen stacks.-Did you do any AFK farming? Oh yeah I did. I even made a script to mine cobblestone for me. Why would I waste my life holding down a mouse button and scrolling occasionally? I have better things to do!-How did you get all of the carpet/wool/bed? String from spiders in the spider farm can be used to make wool for carpet and beds. The dye was all from plants and squids.-How did you get hoppers/shears/iron? When the player kills a zombie, there is a small chance they will drop an iron ingot, and with all of the zombies killed in the EXP farm, that happened quite frequently. That was actually the primary purpose of that farm, because EXP has no purpose on this map.-Why did you upload in 4K 60fps? Because I can.-Why was 13:03 slightly blue tinted? I accidentally recorded with flux enabled, which turns my screen orange (like this http://prnt.sc/dpq4ta ) and I had to do massive amounts of color correction.-What's up with the music skip at 13:35? While getting things synced up, I accidentally trimmed the song in the middle and separated it a bit. If it didn't take 8 hours to render and 13 hours to upload, I would have fixed this, but it's so minor that it's not worth fixing. -My question wasn’t answered D:＜ !!! No need to be angry, that’s what the comment section is for. If you ask a question, I’m 90% likely to answer it if it hasn’t been answered already.Thanks for reading this whole description. You get a cookie! (🍪)
Addressing the Subscribers (My Brief Thoughts About My YouTube Stuff) LazerLord10 2016-12-22 | Lol, I didn't realize how dead I sounded until I edited this. Don't worry, I'm fine, it's just difficult to talk to a microphone with the same energy that you use to talk to another person.Anyway, this is just a general update letting you know that more videos (including a minecraft timelapse) are coming! I also let you know that I don't really make videos specifically for subscribers, I make them as general resources for the internet to have. It's also just a fun hobby.If you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, as it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: http://www.thingiverse.com/Lazerlord/aboutdeviantArt: http://lazerlord10.deviantart.com
Folger Tech FT-5 LARGE SCALE 3D PRINTER Timelapse and Building Tips (3DP#02) LazerLord10 2016-11-21 | In which I build Folger Tech's large format 3D printer! All in all, this took ~24 hours for me to build. Read more for links, song info, and other things!Overall, I really do enjoy this kit. I haven't had more than 3 prints from it yet, but I can already tell that it will be hard to beat the quality of this printer at this price point. It isn't great out of the box, but as a starting point for future modifications (which is what repraps are all about) I don't see how this printer could go wrong. Expect more from this printer in the future, as my old one is being sold.Find this printer: folgertech.com/products/folger-tech-ft-5-large-scale-3d-printer-kitFTDI Virtual COM Port Driver: http://www.ftdichip.com/Drivers/VCP.htmSongs (in order of appearance):- M-Cubed X Fauna - Glisten soundcloud.com/mcubedmusic/glisten?in=mcubedmusic/sets/m-cubed-x-fauna-divided- M-Cubed X Fauna - Static soundcloud.com/mcubedmusic/static?in=mcubedmusic/sets/m-cubed-x-fauna-divided- M-Cubed - Lumped Together - youtube.com/watch?v=h4rLO1XCHVk- Go subscribe to him, he's cool youtube.com/user/MisterMikeyMonsterIf you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, as it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: http://www.thingiverse.com/Lazerlord/aboutdeviantArt: http://lazerlord10.deviantart.com
Happy Halloween Everyone! ft. GhostyMcGhostFace LazerLord10 2016-10-30 | So spooky!Yeah, this is the obligatory Halloween video. I didn't dress up this year, but my drone did!The ghost was made from an old fitted sheet and a balloon. It was fixed to the drone with some fishing line, and the eyes were colored in with sharpie. The final weight of the ghost was about 360 grams, so it's not super light. I would have flown it around more, but it started to rain, and my drone isn't waterproof (yet).Music (as seen in order):"Ossuary 6 - Air" Kevin MacLeod (incompetech.com)"Casa Bossa Nova" Kevin MacLeod (incompetech.com)If you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, as it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: http://www.thingiverse.com/Lazerlord/aboutdeviantArt: http://lazerlord10.deviantart.com
I built a drone (And the camera fell off!) LazerLord10 2016-08-20 | I was testing out a new battery with the drone I just built, and I figured I would attach a cheap action camera to it to record a little bit. Turns out that double-sided duct tape doesn't hold for very long!The camera: amazon.com/gp/product/B00X9Y2NFY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1Music by Ninety9LivesProtosoniX - TempestVideo Link: http://99l.tv/TempestChannel: http://99l.tv/SubscribeAlbum Download Link: http://99l.tv/LevelUpIf you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, as it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: http://www.thingiverse.com/Lazerlord/aboutdeviantArt: http://lazerlord10.deviantart.com
A Brief History of 3D Printers and How They Work (3DP#01) LazerLord10 2016-08-12 | In which I describe how 3D printers work and where they came from. This is a re-creation (sorta) of a presentation I did for school, but I think it's applicable to this series, because it gives you all a good background for 3D printing, both historically and functionally.SOURCE OF INFORMATION: http://3dprintingindustry.com/3d-printing-basics-free-beginners-guide/historyVIDEOS USED:SLA 3D printer: youtube.com/watch?v=snOErpOP5XkSLS process: youtube.com/watch?v=BgAHWfOohucAdriam Bowyer talk: en.wikipedia.org/wiki/Adrian_BowyerMIT Advanced 3D Printer: youtube.com/watch?v=poRFPjiB9vwIf you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, as it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: http://www.thingiverse.com/Lazerlord/aboutdeviantArt: http://lazerlord10.deviantart.com
3DP: What is this series? (3DP#00) LazerLord10 2016-07-31 | In this, my first episode of 3D Printing (3DP for short), I explain what this series is going to be, and I browse around some of the things I've 3D printed in the past. Stay tuned for more videos (hopefully) every week.If you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.Don't forget to leave a rating on the video, it helps me out a lot.Twitter: twitter.com/Lazerlord10Thingiverse: http://www.thingiverse.com/Lazerlord/aboutdeviantArt: http://lazerlord10.deviantart.com
Long Way Down - Comix Zone Original Remix (Episode 2, Page 1-3) LazerLord10 2016-02-03 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist: youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://www.vgmusic.comAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
New Beginnings - Comix Zone Original Remix (Staff Roll) LazerLord10 2016-01-27 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Please excuse any poor technique used in the game, as I didn't look up how to do ANYTHING, so I probably missed out on a lot of it.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist (may not be complete): youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://mxsprojects.blogspot.com/2012/07/comix-zone-ost.htmlAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
Kung-Fung - Comix Zone Original Remix (Episode 2, Page 1-2) LazerLord10 2016-01-20 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Please excuse any poor technique used in the game, as I didn't look up how to do ANYTHING, so I probably missed out on a lot of it.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist (may not be complete): youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://mxsprojects.blogspot.com/2012/07/comix-zone-ost.htmlAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
In the Zone - Comix Zone Original Remix (Episode 1, Page 1-1) LazerLord10 2016-01-13 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Please excuse any poor technique used in the game, as I didn't look up how to do ANYTHING, so I probably missed out on a lot of it.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist (may not be complete): youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://mxsprojects.blogspot.com/2012/07/comix-zone-ost.htmlAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
Drawn In - Comix Zone Original Remix (Introduction) LazerLord10 2016-01-06 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Please excuse any poor technique used in the game, as I didn't look up how to do ANYTHING, so I probably missed out on a lot of it.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist (may not be complete): youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://mxsprojects.blogspot.com/2012/07/comix-zone-ost.htmlAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
Downwell Final Boss Fight (Normal mode) LazerLord10 2016-01-05 | Just a quick video in which I defeat the final boss in Downwell for the first time. This was done in normal mode, but I plan on completing this game again in hard mode. I hop you enjoy it!Some tips for completing this game (only from experience, no research done):-The laser works really well for the final boss.-Don't lose health to preserve a combo, it's not worth it.-Stocking up on health is the best thing you can do.Buy Downwell: http://store.steampowered.com/app/360740Follow me elsewhere:Twitter: twitter.com/Lazerlord10
Seen it for Days - Comix Zone Original Remix (Episode 1, Page 1-2) LazerLord10 2015-12-30 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Please excuse any poor technique used in the game, as I didn't look up how to do ANYTHING, so I probably missed out on a lot of it.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist (may not be complete): youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://mxsprojects.blogspot.com/2012/07/comix-zone-ost.htmlAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
Timelapse: Building a 3D Printer | Folger Tech 2020 Prusa i3 (3DP#-1) LazerLord10 2015-12-28 | I built a 3D printer, and recorded nearly all of the building process. There was a lot to do in building this thing, but it was well worth it! Expect more videos about 3D printing in the future (after I finish calibrating it).Total build time: Roughly 12 hoursWhile I followed the directions to build this initially, I had to change a few things in the final design. What I built in this video isn't exactly what I ended up using.The final shot shows it with a few add-ons. Primarily the glass build plate and the LCD display. The build plate, which is covered in gold-colored kapton tape, was cut from a mirror. The LCD module was purchased and attached onto the RAMPS controller board.The timelapse was filmed on a Droid Razr smartphone from 2011 at 1 picture/second. It was then sped up more in certain places, and the final speed in the video varies between 30 and 90 times faster than real time. The final shots were done with a Nikon D3200. Purchase this kit: http://www.ebay.com/itm/Folger-Tech-2020-Aluminum-2020-Prusa-i3-RepRap-3D-Printer-1-75mm-/231572342806?var=&hash=item35eac98816:m:mF-Qb28wRe_BQzu8FuoxvAwPurchase the LCD add-on (anything similar will work): http://www.amazon.com/Display-Controller-Adapter-RAMPS1-4-Printer/dp/B00JPVESXA/ref=sr_1_5?ie=UTF8&qid=1451345383&sr=8-5&keywords=reprap+LCD#customerReviews Music used (in order of appearance):August - Approaching Nirvana: http://apple.co/1bIkh6ZCurrent - Approaching Nirvana: http://apple.co/1PcVOndVisit Approaching Nirvana's YouTube channel: youtube.com/user/ApproachingNirvanaFollow me elsewhere:Twitter: twitter.com/Lazerlord10
Feed My Disease - Comix Zone Original Remix (Episode 1, Page 2-1) LazerLord10 2015-12-23 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Please excuse any poor technique used in the game, as I didn't look up how to do ANYTHING, so I probably missed out on a lot of it.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist (may not be complete): youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://mxsprojects.blogspot.com/2012/07/comix-zone-ost.htmlAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
Not Over Yet - Comix Zone Original Remix (Episode 3, Page 2-3) LazerLord10 2015-12-16 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Please excuse any poor technique used in the game, as I didn't look up how to do ANYTHING, so I probably missed out on a lot of it.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist (may not be complete): youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://mxsprojects.blogspot.com/2012/07/comix-zone-ost.htmlAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
In Ruins - Comix Zone Original Remix (Episode 3, Page 2-1) LazerLord10 2015-12-09 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Please excuse any poor technique used in the game, as I didn't look up how to do ANYTHING, so I probably missed out on a lot of it.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist (may not be complete): youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://mxsprojects.blogspot.com/2012/07/comix-zone-ost.htmlAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
Tibet City - Comix Zone Original Remix (Episode 2, Page 1-1) LazerLord10 2015-12-02 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Please excuse any poor technique used in the game, as I didn't look up how to do ANYTHING, so I probably missed out on a lot of it.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist (may not be complete): youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://mxsprojects.blogspot.com/2012/07/comix-zone-ost.htmlAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
Temple Gates - Comix Zone Original Remix (Episode 2, Page 2-1) LazerLord10 2015-11-25 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Please excuse any poor technique used in the game, as I didn't look up how to do ANYTHING, so I probably missed out on a lot of it.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist (may not be complete): youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://mxsprojects.blogspot.com/2012/07/comix-zone-ost.htmlAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
In the Temple - Comix Zone Original Remix (Episode 2, Page 2-2) LazerLord10 2015-11-18 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Please excuse any poor technique used in the game, as I didn't look up how to do ANYTHING, so I probably missed out on a lot of it.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist (may not be complete): youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://mxsprojects.blogspot.com/2012/07/comix-zone-ost.htmlAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
A Nuclear Plan - Comix Zone Original Remix (Episode 3, Page 2-2) LazerLord10 2015-11-11 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Please excuse any poor technique used in the game, as I didn't look up how to do ANYTHING, so I probably missed out on a lot of it.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist (may not be complete): youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://mxsprojects.blogspot.com/2012/07/comix-zone-ost.htmlAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
Zealand Atolls - Comix Zone Original Remix (Episode 3, Page 1-1) LazerLord10 2015-11-04 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Please excuse any poor technique used in the game, as I didn't look up how to do ANYTHING, so I probably missed out on a lot of it.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist (may not be complete): youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://mxsprojects.blogspot.com/2012/07/comix-zone-ost.htmlAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
Stockpiles - Comix Zone Original Remix (Episode 1, Page 2-2) LazerLord10 2015-10-28 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Please excuse any poor technique used in the game, as I didn't look up how to do ANYTHING, so I probably missed out on a lot of it.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist (may not be complete): youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://mxsprojects.blogspot.com/2012/07/comix-zone-ost.htmlAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
Homemade Speaker Box Testing - High Volume (100W RMS) LazerLord10 2015-10-27 | A test of my home-made portable speaker box! This is a follow-up to my previous video in which I showed the design and build process that went into this project. I figured that I should show you what it sound like and how loud it can get. Enjoy!Info about the video:Speakers: Homemade 2 x 50W RMS | Built here: youtube.com/watch?v=_7fSTpviqIIMicrophone used: Built-in microphone on the Canon PowerShot SX40 HSPhone used: LG G4Distance: ~4ft.dB reading: I don't really know, but my phone says that it was 85 dB, but I think it's just a little bit more than that. I didn't include it because I thought it was wrong, but I thought I would let you know nonetheless.Songs used (in order):Tiasu - Raw (99 lives release) | Tiasu's website: http://www.tiasu.comSong link | ninety9lives.com/music?album=4&track=58Approaching Nirvana | A Single Day (instrumental version) | Their YouTube channel: youtube.com/user/ApproachingNirvanaSong link: http://bit.ly/1BYWkSbFollow me elsewhere:Twitter @LazerLord10: twitter.com/Lazerlord10
The Other Side - Comix Zone Original Remix (Episode 3, Page 1-3) LazerLord10 2015-10-21 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Please excuse any poor technique used in the game, as I didn't look up how to do ANYTHING, so I probably missed out on a lot of it.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist (may not be complete): youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://mxsprojects.blogspot.com/2012/07/comix-zone-ost.htmlAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
En Route - Comix Zone Original Remix (Episode 3, Page 1-2) LazerLord10 2015-10-14 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Please excuse any poor technique used in the game, as I didn't look up how to do ANYTHING, so I probably missed out on a lot of it.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist (may not be complete): youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://mxsprojects.blogspot.com/2012/07/comix-zone-ost.htmlAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
Battle With Mortus - Comix Zone Original Remix (Final Boss) LazerLord10 2015-10-07 | A remastering of the original soundtrack of the classic game for the Sega Megadrive/Genesis Comix Zone.Created in Mixcraft 6.0, this is my interpretation of what the original composer Howard Drossin would have made had he not been limited by the Megadrive's sound card. I have remixed the whole soundtrack, and will be releasing songs week by week in the order that goes from best to least best. Some of the later levels have WONDERFUL music, and I want people to hear it, hence why I'm uploading them first.Please excuse any poor technique used in the game, as I didn't look up how to do ANYTHING, so I probably missed out on a lot of it.Original Composer: Howard DrossinRelease Year: 1995Download this remix: Will be available once they are all published.Playlist (may not be complete): youtube.com/playlist?list=PL_pFOVtAsROf5SoridzweOL6_J_3MZu-dSource of MIDI file: http://mxsprojects.blogspot.com/2012/07/comix-zone-ost.htmlAbout Comix Zone: en.wikipedia.org/wiki/Comix_ZoneFollow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
Comix Zone Remixes Coming Soon LazerLord10 2015-10-06 | Just letting you know that I will be releasing multiple remixes from the Sega Megadrive game Comix Zone. I remixed most of the soundtrack, and will be releasing each song every Wednesday at 4:30 EST. A download for the whole collection will be available after the final song has been released. That will happen in January.Yes, gaming content will (probably) return. This is just a collection of remixes that I've made for fun over a while, and didn't take too much time to make. Because of this, I will (hopefully) have more time to make some gaming videos. But don't expect too many timelapses, because those take a REALLY long time to make, and I can't just throw one together in a week (or even a month).I hope you enjoy them! The first one will be coming out tomorrow.Follow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
SMB: All 70 Expert + Extra and Master Levels - 1080p 60fps LazerLord10 2015-08-27 | I use the power of save states and the replay menu to bring you a sort of compilation of the expert levels from the GameCube version of Super Monkey Ball. This is more of an archival thing rather than pure entertainment. I want people to be able to see what kind of crazy levels happen later in the game. I didn't look any of these levels up, so I had to do a lot of trial and error in order to figure out how they are completed. Also, no pause-spamming was used to complete the levels. (Just look at some speedruns and you'll know what I mean.)Here's a table to contents of you want to watch a specific set of levels:Jungle - Levels 1-5 -------------- 0:44Monkey Mall - Levels 6-10 --- 2:19Underwater - Levels 11-20 ---- 5:06Desert - Levels 21-30 ----------- 8:11Ice World - Levels 31-40 ------ 13:04Ruins - Levels 41-50 ------------ 16:14Extra Levels 51-60 --------------- 19:01Master Levels 61-70 ------------ 21:32Ending Cutscene ----------------- 26:22This was done on the Dolphin emulator, which is how it was recorded at 1080p. Played with a 360 controller, and probably at about 80% speed in the later part of the game. For some reason, my computer doesn't like the later levels of Super Monkey Ball, and it runs really slowly, which gives me a bit of an advantage, giving me more time to react. The replays were all recorded at a locked 50% speed, and then sped up in editing in order for the video to look nice and smooth.Pop-in of objects around the edges is purely due to the fact that this game was not designed to run in a 16:9 ratio monitor, along with the reflections and certain effects (mainly the heat effect in the desert levels) being incorrect and misaligned. I figured that a widescreen image with a few errors would be better than black bars on either side.Download Dolphin Emulator: dolphin-emu.orgIf you have any questions, feel free to ask in the comments section! I tend to respond to most questions that aren't addressed in the description.Follow me elsewhere:Flickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
From Earth to the Edge of the Universe (4K simulation) LazerLord10 2015-07-17 | It is on a blue spec that we all live upon. Most of us never leave, and can only wonder at the cosmos. Distances and sizes beyond comprehension, humanity's thin veil flies through these distances. While the outreaches of space are of a size unthinkable, there are billions of stars that fill them. Our life-giver is one of those billion, and a small rock that falls around it is what we all call home.This is a representation of what it could look like to travel from the surface of the earth to the outreaches of the universe in about 4 minutes. Every star within our galaxy and every galaxy displayed are real stars and galaxies that have been cataloged. Distances are to a size that is accurate to real life. At the end of the video, the sky above earth lights up with all of the known objects above earth being displayed, primarily distant galaxies we don't normally see.This was created using Space Engine, which is a free, and continuously developed universe simulator. It's very cool, and can actually generate a universe much bigger than our own.Links:Space Engine: http://en.spaceengine.orgMusic: Chronos vs Umka Fx - Pusa : Nowhere, because apparently this Creative Comms music is owned by [Merlin] The State 51 Conspiracy!Feel free to let me know what you thought about this video, as your feedback is always appreciated.Follow me elsewhere:My Website (May be under contruction): lazerlord.odoo.comFlickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
How I Made the Four Pillars Timelapse LazerLord10 2015-06-13 | A little tutorial I made pertaining to how I set up Minecraft for filming my timelapse.HERE IS A WAY TO DO IT IN THE NEWER VERSIONS (this was a comment, and proved very useful):+NiklasFreshMemesAlso you can use multiples of the same account on a LAN or server world in 1.8+. Just launch minecraft with your normal account/profile selected. Then quit the LAUNCHER (Not the client you just launched!) and go into your .minecraft folder. Once there open launcher profiles.json and look for the selected profile bit. Change the "display name" there to something other then your normal account EX Camera. Then save and open the launcher, It should say Camera ready to play minecraft x.x.x. You should be able to log onto the same LAN world now. If you are using and server there is a setting in the config file you have to change (I don't know which one).I believe that the server setting is the one that checks for validated users. It's called "online-mode=false".(how I did it) This was all pretty simple, but if you want to do it with the new version, you can do this:Launch the minecraft launcher and log in and start a world as normalOpen desired world to a LAN networkOpen the miecraft launcher again, but log in as someone else. This is where you would either need to get a second account, or ask a friend for their log in information.Have the second account join the LAN network by scrolling to the bottom of the multilayer menu screen.Use alt-tab to switch between the two accounts. Launch fraps or whatever recording software you want to use and start the recording of the camera's window. Alt-tab to the other minecraft window where you can now play. This should work, but it hasn't been tested with the new version all that much. (edit) While the switching does work, the button-holding-down thing doesn't work.Let me know what you thought, and feel free to ask me any questions.Follow me elsewhere:My Website (Under contruction): lazerlord.odoo.comFlickr: flickr.com/photos/lazerlorddeviantArt: http://lazerlord10.deviantart.comTwitter: twitter.com/Lazerlord10
