Department of Engineering, University of Cambridge
The embodied intelligence of soil
updated
Solutions are being developed at Cambridge that can be implemented, grown to scale, and used to accelerate the rapid transition to a net zero and then zero emissions economy.
In this series of short films, Cambridge researchers discuss how their work is supporting the energy transition.
Professor Andy Sederman, from the Magnetic Resonance Research Centre in the Department of Chemical Engineering and Biotechnology, uses MRI and magnetic resonance methods to accelerate the development of new systems to support the circular economy.
Solutions are being developed at Cambridge that can be implemented, grown to scale, and used to accelerate the rapid transition to a net zero and then zero emissions economy.
In this series of short films, Cambridge researchers discuss how their work is supporting the energy transition.
Professor Markus Kraft is Director of the Cambridge Centre for Advanced Research and Education in Singapore (CARES), the University of Cambridge’s first overseas research centre. One of the Centre's key research areas is reducing the carbon emissions of the chemical industry.
Solutions are being developed at Cambridge that can be implemented, grown to scale, and used to accelerate the rapid transition to a net zero and then zero emissions economy.
In this series of short films, Cambridge researchers discuss how their work is supporting the energy transition.
Professor Andy Woods is Director of the Institute for Energy and Environmental Flows, an interdisciplinary centre focused on granular flows and fluid dynamics for sustainability and the energy transition.
Solutions are being developed at Cambridge that can be implemented, grown to scale, and used to accelerate the rapid transition to a net zero and then zero emissions economy.
In this series of short films, Cambridge researchers discuss how their work is supporting the energy transition.
Professor Rachel Garrett's research is focused on ending deforestation globally. She examines the drivers and impacts of land change, primarily in forest landscapes, and the effectiveness and equity of forest conservation and sustainable agriculture policies and practices. I work closely with farmers and national agriculture and forestry agencies. My research spans Brazil, Ghana, Ivory Coast, Indonesia, Switzerland, and the Republic of Georgia.
Solutions are being developed at Cambridge that can be implemented, grown to scale, and used to accelerate the rapid transition to a net zero and then zero emissions economy.
In this series of short films, Cambridge researchers discuss how their work is supporting the energy transition.
Dr Israel Temprano is working to improve existing and develop new types of batteries, a technology that is critical to the energy transition.
Solutions are being developed at Cambridge that can be implemented, grown to scale, and used to accelerate the rapid transition to a net zero and then zero emissions economy.
In this series of short films, Cambridge researchers discuss how their work is supporting the energy transition.
Professor Garth Wells' research focuses on the development of new computer models for simulating complex engineering systems, particularly around the energy transition.
Solutions are being developed at Cambridge that can be implemented, grown to scale, and used to accelerate the rapid transition to a net zero and then zero emissions economy.
In this series of short films, Cambridge researchers discuss how their work is supporting the energy transition.
Professor Rob Miller is Director of Whittle Laboratory, a leading global centre for net-zero aviation and energy. The King recently broke ground for the New Whittle Laboratory: its mission is to halve the time to develop key technologies to support a sustainable aviation industry.
Solutions are being developed at Cambridge that can be implemented, grown to scale, and used to accelerate the rapid transition to a net zero and then zero emissions economy.
In this series of short films, Cambridge researchers discuss how their work is supporting the energy transition.
Professor Srinivasan Keshav, from the Department of Computer Science and Technology, focuses on reducing the carbon footprint of energy generation, transportation, and buildings. He has recently been studying digital monitoring, reporting, and verification for trustworthy carbon credits, especially from avoided deforestation.
Solutions are being developed at Cambridge that can be implemented, grown to scale, and used to accelerate the rapid transition to a net zero and then zero emissions economy.
In this series of short films, Cambridge researchers discuss how their work is supporting the energy transition.
Professor Adam Boies' research focuses on the evolution, dynamics and impacts of gas-phase nanoparticles. The applications of his research extend from engineered nanoparticles for energy applications to transportation emissions and air quality.
Solutions are being developed at Cambridge that can be implemented, grown to scale, and used to accelerate the rapid transition to a net zero and then zero emissions economy.
In this series of short films, Cambridge researchers discuss how their work is supporting the energy transition.
Professor David Cebon's research is concerned with the decarbonisation of road freight, which represents between 7 and 8 percent of global carbon emissions.
Solutions are being developed at Cambridge that can be implemented, grown to scale, and used to accelerate the rapid transition to a net zero and then zero emissions economy.
In this series of short films, Cambridge researchers discuss how their work is supporting the energy transition.
Professor Ruchi Choudhary, from the Department of Engineering, specialises in building simulation and environmental characteristics of the built environment. At Cambridge, she is leading the multi-disciplinary Energy Efficient Cities initiative (EECi) with colleagues in transport technologies and urban planning. Her current research concerns urban-scale energy simulation of built environments, with specific emphasis on uncertainty analysis and retrofits of existing buildings.
Solutions are being developed at Cambridge that can be implemented, grown to scale, and used to accelerate the rapid transition to a net zero and then zero emissions economy.
In this series of short films, Cambridge researchers discuss how their work is supporting the energy transition.
Professor Sir Richard Friend's research focuses on the development of new types of semiconductors, particularly for use in solar cell technology.
The content of the talk includes an overview of the design of the VVER reactor, layout and status of the plant and its six reactors, and potential risk factors concerning the cooling system, shelling and power outage.
The aim of this talk is to inform a technical audience and provide context to the media messaging.
The talk is given by Eugene Shwageraus, Professor in Nuclear Energy Systems Engineering at the Department of Engineering, University of Cambridge, and Course Director for the MPhil in Nuclear Energy. Professor Shwageraus’ research is focussed on physics and engineering of conventional and advanced nuclear power reactors, with a particular interest in Monte Carlo methods applied to radiation transport, as well as modelling of nuclear systems to assist policy decision-making.
Video credit: HR Wallingford
http://www.eng.cam.ac.uk/news/earthquake-induced-liquefaction-offshore-wind-farms
Flow-MRI scans depict #BloodFlow velocity but they are ‘noisy’ and have limited resolution in space and time. Digital Twins can enable the high-resolution imaging of flows and provide quantitative estimates of haemodynamic #biomarkers (used to diagnose cardiovascular disease) that are difficult or impossible to measure otherwise.
Credit: Alexandros Kontogiannis.
If you have a good 2.1 in engineering, physics or other science subject and are interested in clean and abundant energy, consider applying. Several funding opportunities are available. Please visit postgraduate.study.cam.ac.uk/courses/directory/egegmpmne to apply, or contact nuclear-mphil-enquiries@eng.cam.ac.uk with any queries.
cnec.uk/programmes/masters
‘BioArm’ is a low-cost extrusion-based bioprinter to rival existing open-source bioprinters that cost less than £1,000: : http://www.eng.cam.ac.uk/news/introducing-bioarm-portable-3d-bioprinter-joining-fight-against-cancer
A cross-disciplinary research team from the University of Cambridge and King’s College London studied the interaction between immune cells and the reconstructed tumouroids with cancer-associated fibroblasts (CAFs), and then subsequently simulated immunotherapy treatments.
It is the first time that multi-characteristic particle measurements – including lung deposited surface area (LDSA), #BlackCarbon, and particle number – have been performed in this way, and it is hoped that this research will inform #environmental initiatives and support efforts to clean up the maritime sector.
This research was carried out by the Department of Engineering, University of Cambridge, alongside the Cambridge Centre for Advanced Research and Education in Singapore (CARES), and supported by the National Research Foundation, Prime Minister's Office, Singapore, under its Campus for Research Excellence and Technological Enterprise (CREATE) programme.
‘Printer.HM’, as it is known, is the brainchild of researchers from the Department of Engineering, University of Cambridge, and The Nanoscience Centre, University of Cambridge, in collaboration with the Universities of Macau and Oxford: http://www.eng.cam.ac.uk/news/introducing-printerhm-future-3d-printing-soft-materials
This video highlights the full experimental procedure in the entrant's tyre wear experiments.
The objective was to emulate the large side-slip angles of #tyres, when a tractor-trailer combination goes around a roundabout in the UK.
The tyre debris coming out of the abrasive wear was collected, weighed and used to create a tyre wear model.
Acknowledgements: Thanks to Mr Chen Liu, Mr Terence Stocks, Mr Stefan Savage, Dr Daniel Ainalis, Dr Jason Day and Professor David Cebon for their help and support in conducting these experiments. Sincere thanks to our industry partners in the Centre for #Sustainable Road #Freight group for giving me the opportunity to work on this project.
This video does not show a realistic model of lightning. It is more a demonstration of the breadth-first search #algorithm. This animation was created in Mathematica, as part of the entrant's hobby of creative #coding.
Alumnus Matthew said: "We can create a model of a #LightningStrike by finding the shortest path in a random #maze – from a point at the top to the ground. To find the path, we send out a frontier through the maze and trace it back once it reaches the ground."
This video combines high-speed footage from various visualisation techniques (schlieren, OH* chemiluminesnce, and planar laser-induced fluorescence of fuel and OH), showing distinct features of the 'birth' of a flame in a cloud of #fuel droplets.
The footage reveals how flame propagation may differ significantly between conventional and #renewable #aviation fuels, depending on the fuel's thermophysical properties and the spray's characteristics.
This video, shown in #SlowMotion, captures the collapse of two thin mortar scale-model vaults during their harmonic shaking in the centrifuge. The high-speed camera, equipped for the tests, captured a photographic sequence which revealed the entire structural response, starting from the formation and propagation of cracking to the #collapse of the structures.
The collapse of these structures in real time is usually sudden and it occurs so fast that it is invisible to the human eye.
Acknowledgements: This experimental research was financially supported by TRIMBLE and by the #Engineering and Physical Sciences Research Council (Grant EP/L016095/1).
Read more: http://www.eng.cam.ac.uk/news/women-engineering-interview-phd-student-lyndie-zollinger
Video credits – Royalty Free Music: www.bensound.com (bensound.com)
– Dog footage (in park and on beach): www.pexels.com
Video credits – Royalty Free Music: www.bensound.com (bensound.com)
– Images: www.unsplash.com
Thanks to this mould, the team can cast concrete shell segments, whether identical or different, with a single mould. This system allows mass-customisation and significantly reduces the waste and carbon content due to the necessary formwork of these efficient but more complex to build curved structures.
#antibioticresistance
The device is so thin – about the width of a human hair – that it can be rolled up into a tiny cylinder, inserted into a needle, and implanted into the #epidural space of the spinal column. Once correctly positioned, the device is inflated with water or air so that it unrolls like a tiny air mattress, covering a large section of the #SpinalCord. When connected to a pulse generator, the ultra-thin electrodes start sending small electrical currents to the spinal cord, which disrupt #PainSignals.
LiDAR is commonly used in agriculture, archaeology and geography, but it is also being trialled in #AutonomousVehicles for obstacle detection.
The #technology, developed by researchers from the University of Cambridge, the University of Oxford and University College London (UCL), is based on LiDAR (light detection and ranging), and uses LiDAR data to create ultra-high-definition #holographic representations of road objects which are beamed directly to the driver’s eyes, instead of 2D windscreen projections used in most head-up displays.
This video was entered into the Department's 2020-21 ZEISS Photography Competition by PhD student Jana Skirnewskaja.
Acknowledgements: Dr Phil Wilkes from UCL’s Geography Department.
This #research, examining each step of the process – print, capture and release, was carried out by the Fluids in Advanced #Manufacturing research team from the Institute for Manufacturing (IfM), part of the Department of Engineering: http://www.eng.cam.ac.uk/news/new-inkjet-printing-method-could-accelerate-drug-discovery-and-printed-personalised-drug
The researchers used their method to culture and grow a ‘mini-airway’, the first time that a tube-shaped organoid has been developed without the need for any external support:
http://www.eng.cam.ac.uk/news/new-method-developed-sizing-mini-organs-used-medical-research
#medicalresearch
Credit: Hal Evans
http://www.eng.cam.ac.uk/news/study-dynamics-free-falling-paper-shapes-could-aid-design-bio-inspired-robotics
This is a video of a self-healing mortar specimen being pumped during the healing process. ‘Blood’ (sodium silicate) was dyed in blue and pumped into vascular-mortar beam. ‘Blood’ was observed being released.
Vertical liftoff of a 4" wafer deposited with thin films of Ti/Au 5/30 nm.
The viscosity of the liftoff chemical allows the peeled off gold to float and dance around the fluid. Recorded with a slow-mo camera.
This video captures the moment of tip leakage flow breakdown caused by local flow instability in a centrifugal compressor.
This result is part of my research to understand flow physics during a transition period of a centrifugal compressor from a stable to an unstable mode (rotating stall).
This result shows the tip leakage flow breakdown is the cause of measured large magnitude pressure fluctuations in the compressor before rotating stall happens.
This research work has been presented at the American Society of Mechanical Engineering Turbo Expo 2019.
Acknowledgements: I would like to thank my co-authors of the paper, Tadashi Kanzaka, Liping Xu and Tobias Brandvik, for their collaboration on the research project.
The video combines high-speed footage from various visualisation techniques (schlieren, OH* chemiluminesnce, and planar laser-induced fluorescence of fuel and OH), showing distinct features of the ignition and propagation mechanisms of a flame in a spray of fuel droplets.
These mechanisms have been only directly visualised in high-fidelity direct simulations until this moment, and reveal how flame propagation may differ significantly between conventional and renewable aviation fuels, depending on the fuel's thermophysical properties and the spray's characteristics.
The physical insight from such experiments can be used in the development of a new generation of aviation engines, and also help in streamlining the certification process of drop-in alternative jet fuels for current engines.
Acknowledgements: Prof. E. Mastorakos (supervisor), Dr. P.M. Allison, Dr. A. Skiba. Funding: Brazilian Space Agency/CNPq, European Commission Clean Sky, US' National Jet Fuels Combustion Program, US' Air Force Research Laboratory.
This video shows a comparison between numerical simulations (left and right) and laboratory experiments (centre) of a thermal (a rising parcel of fluid).
The thermal wraps up into a mushroom cap before eventually becoming a buoyant vortex ring. After the vortex ring moves off ahead, a second mushroom begins to form from the wake. The numerics, along with the mathematical predictions and results, match well the real-world behaviour until the point at which the experimental vortex ring impinges upon the top of the tank, whereupon it breaks apart in a graceful fashion.
These images come work I performed as part of my PhD thesis. The work studied the processes by which the thermal transitions between the different stages to provide an understanding of its evolution.
A magnet levitates atop a bulk superconductor, its surface hidden under a layer of mist.
The superconductor is submerged in a liquid nitrogen bath to keep below its critical temperature. When in the superconducting state, a material will resist any changes in external magnetic field, providing a levitation force to the magnet.
The top surface of the superconductor is exposed to the atmosphere but is kept at about -196 degrees Celsius, the boiling point of liquid nitrogen. Since oxygen has a higher boiling point at -183 degrees Celsius, it will condense from the atmosphere and form a droplet on the superconductor surface. Being paramagnetic, the oxygen droplet will then be attracted to the levitating magnet and will eventually ascend to the magnet.
This video is taken at the precise moment when the attraction from the magnet overcomes the surface tension and gravitational force of the droplet, which itself forms a pillar between magnet and superconductor.
The image shows a 3D multicellular spheroid model consisting of glioblastoma cells moving along sprouting endothelial (blood vessel forming) cells. Both glioblastoma and endothelial cells have been genetically modified to express green and red fluorescent protein respectively.
Glioblastoma is the most aggressive and invasive form of brain cancer, with a median survival of only about 15 months. This type of tumour is able to grow so quickly because it has the power to produce new blood vessels when needed. In fact, the presence of glioblastoma cells promotes the sprouting of the endothelial cells. Moreover, this tumour is highly infiltrative, and this is partially because glioblastoma cells use blood vessels as ‘highways’ for their migration to different parts of the brain.
This biomimetic model has been developed to provide insight into the mechanisms that drive glioblastoma neovascularisation and invasion along blood vessels, and to serve as a personalised tool for the initial screening of antiangiogenic drug efficacy.
Human body parsing is the process of segmenting an image or video of a person into semantically meaningful parts. The system Dr James Charles and his team designed is capable of automatically parsing multiple people in video and decomposing them into clothing items and body parts.
Here they show the output from their real-time deep learning based system, when applied to an image of a dancer. Different colours represent different parts; on the left are clothing items and on the right body parts are shown.
When applied to video, tracking of individual people and their parts is accomplished by matching segments together along a temporal sequence. Their algorithm is quite efficient and able to run in real-time live on a mobile phone. Such systems have many applications e.g. making self-driving cars aware of the motion and behaviour of pedestrians.
#GuyMartin #TheGreatEscape
http://www.eng.cam.ac.uk/news/motorcycle-racer-guy-martin-visits-cambridge-ahead-his-great-escape
#GuyMartin #TheGreatEscape
http://www.eng.cam.ac.uk/news/motorcycle-racer-guy-martin-visits-cambridge-ahead-his-great-escape


