Uploaded November 2023 | Updated September 2026, 2 weeks ago
00:00 Repair bike pump
00:11 replace with a new hose, or replace head valve
00:16 The diameter hose this bike pump about 5mm
00:31 Modern bike pump, more easy to repair
00:57 tipe of hose - Polyurethane hose more flexibel, max 100 psi, but safety 80 psi
01:02 If head valve broken, you replace too
Measurement length of hose.
Remove the old hose. To remove the old hose, you will need to loosen the hose clamps and then slide the hose off of the pump.
Install the new hose. To install the new hose, you will need to slide it onto the pump and then tighten the hose clamps.
Test the pump. Once you have installed the new hose, you should test the pump to make sure that it is working properly.
The size of a bike pump hose typically ranges from 6mm to 10mm in diameter. The most common size is 10mm, which is compatible with most Presta and Schrader valves. However, some pumps may use a 6mm hose, which is typically used for high-pressure applications.
Measurement inner house not outher hose.
Our pump using 5mm width diameter.
The size of the hose is important because it affects the air flow of the pump. A larger hose will allow more air to flow, which means that you will be able to inflate your tires more quickly. However, a larger hose will also be heavier and more bulky, which may not be ideal for a portable pump.
00:00 Repair bike pump
00:11 replace with a new hose, or replace head valve
00:16 The diameter hose this bike pump about 5mm
00:31 Modern bike pump, more easy to repair
00:57 tipe of hose - Polyurethane hose more flexibel, max 100 psi, but safety 80 psi
01:02 If head valve broken, you replace too
Measurement length of hose.
Remove the old hose. To remove the old hose, you will need to loosen the hose clamps and then slide the hose off of the pump.
Install the new hose. To install the new hose, you will need to slide it onto the pump and then tighten the hose clamps.
Test the pump. Once you have installed the new hose, you should test the pump to make sure that it is working properly.
The size of a bike pump hose typically ranges from 6mm to 10mm in diameter. The most common size is 10mm, which is compatible with most Presta and Schrader valves. However, some pumps may use a 6mm hose, which is typically used for high-pressure applications.
Measurement inner house not outher hose.
Our pump using 5mm width diameter.
The size of the hose is important because it affects the air flow of the pump. A larger hose will allow more air to flow, which means that you will be able to inflate your tires more quickly. However, a larger hose will also be heavier and more bulky, which may not be ideal for a portable pump.
