Recover Windows Boot Manager Missing And Windows Cant Boot @ObengwareID

Uploaded December 2021 | Updated September 2026, 3 weeks ago

This case, change Harddisk / SSD with WIndows 10 or Windows 11
But cant Boot
00:00 Error Boot and Select
On screen, show Boot and Select proper Boot device
Insert Boot Media in selected Boot device and press a key
Windows 10 or Windows 11 can't boot after change the drive
00:05 Missing Windows Boot Manager
On BIOS not show Windows Boot Manager

00:11 Recovery
Install Flash Drive with ISO file Windows Installer
Extract to Flash drive
Plug Windows Installer to computer

00:21 Boot from Flash Drive
Press F12
Select UEFI L Flash Drive

00:39 Repair
After appear Install Now, don't click
Select Repair your computer

00:46 UEFI FIrmware
Go to UEFI FIrmware Setting menu , recover PC UEFI BIOS
And Restart

00:55 If Bios Show
Save the BIOS Setting
The Windows OS will but normal

For Windows 11
Using Tiny 11
Small ISO for recover Boot Manager
archive.org/details/windows11tinyedition
Extract file to Rufus program
Boot from Tiny 11
Select YES
And Reboot

Windows 11 Tiny Edition (22000.708)
Only need 1.3GB, enough for 2GB flash drive.
This Tiny11 Windows can detect if your computer already Windows 10 or Windows 11
After boot with Tiny 11, no need setting
Because boot Tiny 11 will ask, you have other drive, just click YES
Boot Manager on BIOS will back appear.

Recover Windows Boot Manager Missing And Windows Cant Boot

$How to replace mounting heatsink push pins How to Replace a Broken Plastic Mounting Pin on an Intel CPU Cooler 00:00 Repair a broken heatsink cooler 00:07 Twist the push pin 00:15 Dont to break the locking pin 00:35 Remove the inner part 01:20 Replace a broken with a new Its a common issue: youre working on your computer, and suddenly, a plastic mounting pin on your Intel CPU cooler snaps. These pins, which secure the cooler to the motherboard, can become brittle over time and break without warning. If one is bent, its often a sign that it could break soon. Fortunately, replacing a broken pin is a simple and inexpensive repair. Why Do They Break? Intels stock CPU coolers use a push-pin design. While convenient, the plastic pins are prone to breaking. The most common reasons for a pin to break include: Heat cycling: The repeated heating and cooling of the plastic can cause it to become brittle and weak over time. Physical stress: Bending a pin during installation or removal can cause a hairline fracture that eventually leads to a complete break. Age: Older plastic is more likely to be fragile and prone to snapping. Incorrect installation: Applying too much force or using an improper technique can stress the pin beyond its breaking point. What Youll Need New mounting pins: You can buy a set of replacement push-pins online or at a computer repair shop. They are often sold in packs of four. Small flat-head screwdriver: This will help you to gently pry the broken parts out. Rubbing alcohol and a clean cloth: To clean any thermal paste residue. New thermal paste: Its crucial to apply a fresh layer after reinstalling the cooler. Step-by-Step Replacement Guide Remove the old cooler: Carefully remove the CPU cooler from the motherboard. Youll need to gently twist the remaining pins to unlock them and then lift the cooler away. Remove the broken pin: On the back of the coolers fan assembly, youll see the broken pin. Use a small flat-head screwdriver to gently push it out. You may need to press on the broken piece from the front of the cooler. Insert the new pin: Take a new replacement pin and align it with the hole. Gently push it into place until it clicks. Ensure the new pin is correctly oriented. Apply new thermal paste: Apply a small, pea-sized dot of new thermal paste to the center of the CPU. This is essential for effective cooling. Reinstall the cooler: Carefully lower the cooler back onto the CPU, aligning the four pins with the holes in the motherboard. Secure the cooler: Push down on the four pins, one at a time, until you hear a click. This indicates that the pins have locked into place. You can do this in a diagonal pattern (top-left, bottom-right, top-right, bottom-left) to ensure even pressure. Alternative Solution: Upgrade Your Cooler If you find the plastic pins to be a recurring problem, it might be a good time to consider an upgrade. Aftermarket CPU coolers often use a more robust mounting system, such as metal brackets and screws, which provide a more secure and reliable fit.$

Make program ESPHome Arduino IDE with Ai No Need Coding

Clean and repair battery leak socket wall clock restoration like we are thinking.

ESP32 C6 port not detect Upload fail exit status 1 No board name

Fix ESP32 Error Guru Mediation Error Core 1

Remap buttons on your Android TV remote using Button Mapper to launch an app

How to check temperature PCH mainboard normal temperature

ESP32 not detect LED power Off board repair board

Wire Up RJ45 Pass-Through Ethernet Plugs: How to Cut Excess Cable Ends

Fix Internet slow switch channel 2.4Ghz or 5Ghz