Phil Vandelay
How 3D Scanning Actually Saves You Time (Revopoint MetroY Pro)
updated
π 3D files for Dust Box inside the Saw: philvandelay.etsy.com/listing/1708628057
π 3D files for the Dust Hood: philvandelay.etsy.com/de-en/listing/1685104864
π§ LINK LIST for tools I use in my videos: https://hero.page/philvandelay/my-favorite-tools
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
Here's some videos that inspired my Dust Hood Design:
youtu.be/_fZtUovrCm0?si=nSRiFs3itelRC9Vd
youtu.be/TkYoLxlHAD0?si=NRJTIO1-JkMhH1fL
If you want to see the full build in more detail and with explanations, check out the detailed build video here: youtu.be/SDlnDEXlfm8
π PLANS for this project: etsy.com/listing/746194519
π§ LINK LIST for tools I use in my videos: https://hero.page/philvandelay/my-favorite-tools
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
Thanks to Flexispot for sponsoring this Video! Check out their E7 Standing Desk here: http://tinyurl.com/2u9fb98f
You can use my exclusive code 'YTBNY30' for an extra $30 off on E7 and E7 Pro Models. Use βYTBNY50β for an extra $50 off on the E7 Plus!
PLANS for the Desk:
http://tinyurl.com/bddnycm2
LINK LIST for Products used in this Build (US and EU):
https://hero.page/philvandelay/standing-desk-product-links
LINK LIST for my favorite Tools:
https://hero.page/philvandelay/my-favorite-tools
My new 3D Printer - Bambu Lab X1 Carbon:
http://tinyurl.com/msfzzsnf
My previous Desk Build:
youtu.be/NqjKpE7bdXc
Check out Zacks video to learn more about #gridfinity :
youtu.be/ra_9zU-mnl8?si=YJ1RYDHxO-sFMFD6
My Socials:
π PLANS: etsy.com/shop/philvandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
(This description contains Affiliate Links)
Timestamps:
0:00 Introduction
02:22 Building Shelf Unit
10:38 Electronics/Built in Light
13:27 Building Underdesk Drawer
18:46 Installing PC Setup, Cable Management
21:14 3D Printing Custom Storage for Pegboards
26:05 Final Product and Outro
figured I should be posting more reels so this hopefully will be a regular occurence now. I almost forgot I had the footage for this little hack, but recently stumbled upon it and figured I can turn it into a short video. You can also buy nuts like shown in the reel but they're around 30$ and I'm a cheapskate.
If you're interested in the full build for the bike shown, check it out on my YouTube channel
Thanks to Flexispot for sponsoring this video!
Check out their Premium Standing Desks here: bit.ly/3ToJXhs (Affiliate Link)
You can use the Promo Code "YTB30" to get a $30 discount on all orders over $500!
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
π PLANS: etsy.com/shop/philvandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
First video on this project: youtu.be/DHGG3gRVd7w
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
π PLANS: etsy.com/shop/philvandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
LINKS:
π PLANS: etsy.com/listing/1497977778
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
Suspension Fork: spinner-usa.com/products.php?func=p_detail&p_id=24&pc_parent=3
Video about pressing in/out Fork Components: youtube.com/watch?v=LFvPNWAH6Kg
Big Thanks to my top active Patreon supporters: Paul Daniel, Jeremy Gordon
00:00 Intro
00:33 Machining Cable-Steering Pulleys
06:46 Building Steering Shaft
09:39 Making Kickstand Parts
19:00 Finishing Steps for the Frame
22:50 Assembling Kickstand
25:36 Internal Wiring
35:37 Assembling Cable-Steering
41:00 Assembling Rest of the Bike
43:58 Finished Kickstand/Steering Demonstration
46:31 Showing Finished Bike / Closing Words
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
"Easy" DIY Cargo Bike Build: youtu.be/SDlnDEXlfm8
LINKS:
π PLANS: etsy.com/listing/1497977778
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
This series will consist of 2 build videos and one follow-up video with additional content. Enjoy!
00:00 Intro & Concept
02:25 Preparing the Donor Frame
05:00 Frame Jig, Tooling and preparing Tubing
07:03 Cutting/Mitering/Drilling Frame Tubes
15:20 Turning Custom Headtube
18:00 Welding the Frame
23:28 Checking and Fixing Distortion
25:05 Cutting, Mitering, Welding Cargo Cage Parts
29:43 Building a Fixture & Mitering Cargo Cage
34:04 More Fixturing
35:30 Building Lower Cargo Cage & Tack Welding
41:53 Finishing Frame Welds & Outro
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
LINKS:
π PLANS: etsy.com/listing/1497977778
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
Easy DIY Cargo Bike Build: youtu.be/SDlnDEXlfm8
---
It's time for another round of Lathe Improvements! Check out everything I've changed and improved on my Lathe since the last Lathe video.
00:00 Intro
00:45 Chip-Proofing various Openings
02:43 Work Light + Shelf Improvements
03:44 Full Accordeon-Style Way Covers
20:00 Sponsorship Message
21:24 New DRO Mounting Post
23:37 New Control Panel Buttons and Switches
28:56 Improved Handwheel-Gearbox
40:14 Additional Notes & Fixes
42:25 Carriage/Toolpost Drilling Capability
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
LINKS:
π PLANS: etsy.com/listing/1142626532
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
Stefans Carriage Drilling Video:
youtu.be/eAXqEfCr5jI
Way Covers on Aliexpress:
shorturl.at/wDOS6
This Video was sponsored by Brilliant
figured I'd give this #shorts thing a try - so here's the ultra-short-attention-span version of my vise handle build. Thanks to being balanced this handle allows you to close and open vise jaws super fast, but can also be positioned to deliver extra torque.
For all my subscribers: There's a new long form video coming VERY soon!
Hey everyone, believe it or not, I'm back with a new video! It's a short one about a side project I made earlier this year, but I also have new, bigger projects to show you soon - among them the most ambitious Bike I have built yet. Sorry for the hiatus, and Thanks for watching!
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
Restoration Video for this Vise: youtu.be/hQ3XPpge6tU
Video about the Vise Base: youtu.be/uIxJM529n7M
LINKS:
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
LINKS:
π PLANS: etsy.com/listing/1142626532
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
π‘ Table Parts
Acoustic Foam Panels: tinyurl.com/2p9b6h3t
Tabletop USB Hub: amzn.to/3HCMLAK
USB Hub /w Cardreader(US): amzn.to/3UgaE8u
Tabletop Power Outlets(US): tinyurl.com/2s39azzs
Retractable Powerstrip(US): amzn.to/3SDDBKE
RGBW LED Strip /w Remote: amzn.to/3ueERKy
LED Aluminum Profiles: tinyurl.com/4df2s938
Monitor Wall Mount: tinyurl.com/2p8u456x
Retractable Powerstrip(EU): amzn.to/3ScO5is
Tabletop USB Hub (EU): amzn.to/3FdoSf7
β¨οΈ PC Hardware/Desk Stuff
Screenbar: tinyurl.com/5et5dbft
38" Ultrawide Monitor: amzn.to/3UlVIWn
USB-C Spiral Cable: tinyurl.com/59eccb98
Logitech Keyboard: tinyurl.com/2tpnetbf
Logitech Mouse: tinyurl.com/ssa848sj
Desk Mat: tinyurl.com/2p8f5eyx
Sony NC Headphones: tinyurl.com/39nrscrh
AKG Monitor Headphones: tinyurl.com/4v45c8pz
Speakers: tinyurl.com/59tz5pak
Microphone Arm: tinyurl.com/4yb6tpxp
3D Printer: tinyurl.com/yck44dvt
Phone Charger: tinyurl.com/yckz49fm
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
(This description contains affiliate links)
Timestamps:
0:00 Introduction / Concept
2:14 Cutting and Preparing Steel Parts
3:54 Welding Main Frame Parts
9:19 Test Assembly and Additions to Frame
11:20 Making Back Panels
13:25 Finishing Shelf
14:30 Making Tabletop
18:51 Building Cable Tray
21:48 Making Integrated LED Light Bars
24:47 Installing Cable Lid Tabs
26:03 Making Cable Lid
27:40 Building Mounts for Monitor Arm + Speaker Shelves
29:57 Finishing Touches, Transport, Reassembly + Setting up PC
32:10 Showing Final Product + Explaining Features in Detail
If you haven't seen this build yet and are interested in a more detailed version, you can watch the original series here:
Part 1: youtu.be/gaIVzdJ2V5w
Part 2: youtu.be/q0KzSZVommY
Part 3: youtu.be/dvvOFyb6vXA
Playlist: tinyurl.com/5n7c4v24
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
π BELT GRINDER PLANS: etsy.com/listing/823825577
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
LINKS:
π PLANS: etsy.com/listing/1081799881
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
Timestamps:
00:00 Introduction / Explaining Concept
4:11 Building Crane Base
7:53 Building Cable Guides
9:44 Building Clamping Nut
12:12 Building Clamping Screw
16:21 Building Carriage - Sideplates
17:24 Building Axles and Spacers
18:02 Building Crane Arm Support
20:06 Building Arm Segments
22:10 Building Claw Clamp
26:39 Various Finishing Touches
28:26 Final Assembly
34:04 Small Fix for the Claw
35:15 Final Testing and Demonstration
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
LINKS
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
π Plans for my Projects on Etsy: etsy.com/shop/PhilVandelay
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
---
VIDEOS
π₯ Belt Grinder Build Video + Plans: youtu.be/gaIVzdJ2V5w
π₯ Welding Table Demonstration Video: youtu.be/IhLzQMI_zwk
π₯ Vise Restoration Video: youtu.be/hQ3XPpge6tU
---
LINKS
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
βοΈ Ko-Fi / Donations: ko-fi.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
π Plans for my Projects on Etsy: etsy.com/shop/PhilVandelay
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
βοΈ Ko-Fi / Donations: ko-fi.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
π Plans for my Projects on Etsy: etsy.com/shop/PhilVandelay
Welding Table Review Video by @FireballTool : youtu.be/bJVZjhRTEfs
Kovosu Weldingtable on Instagram: instagram.com/kovosu_weldingtable
-----Timestamps----
0:00 Intro
01:40 Unboxing
02:47 Lifting Table + Assembling Legs
05:24 Leveling Table
06:40 Talking about Flatness / Measuring Reference Surfaces
09:50 Measuring Flatness of New Table
12:43 Showing Acessories / Fastening Bolts
14:22 Demonstrating Tooling, Aligning & Clamping Setups
19:53 Hardness Test
---
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
π Plans for my Projects on Etsy: etsy.com/shop/PhilVandelay
---
TIMESTAMPS
00:00 Intro
2:10 Disassembly
4:44 Restoring Vise Handle
9:13 Restoring Main Spindle
10:50 Restoring Small parts
12:37 Restoring/Fixing Jaws + Screws
15:11 Fixing the Mounting/Locking Screw
17:23 Restoring/Machining Base Plate
20:00 Restoring Main Castings
21:23 Sandblasting
23:43 Machining Anvil Flat
25:08 Cold Bluing / Surface Conditioning
27:15 Finished Parts / Final Assembly
30:20 Finished Product
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
Plans for the Belt Grinder: etsy.com/listing/823825577
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
Timestamps:
00:00 Introduction & Improving VFD Installation
02:37 Analyzing Spark/Dust Problem
04:58 Building Dustpan
11:44 Building Spark Shields
19:18 Showing Results
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
------
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
--------
Timestamps:
00:00 Introduction
01:14 Improved control panel
01:34 Improved carriage handwheel
02:14 Tailstock DRO
04:21 Tool Shelf
06:04 Steel Headstock Covers
07:53 Solid Toolpost
14:43 Way covers
17:01 Chip shield
https://hero.page/philvandelay/my-favorite-tools
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
Watch Part 1 here: youtu.be/gaIVzdJ2V5w
Watch Part 2 here: youtu.be/q0KzSZVommY
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
π Belt Grinder Plans: etsy.com/listing/823825577
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
Time Stamps:
0:00 Introduction
0:32 Machining Table Clamping Block
2:47 Machining Work Table
6:56 Installing Work Table + Testing
9:15 Measuring Drive Wheel Runout
9:51 Making Modificatios + Additional Parts
12:47 Machining + Wiring Control Panel
15:52 Surface Treatment (Cold Blueing) of Steel Parts
19:04 Final Assembly
23:05 Finished Grinder + Running Test (SPARKS!)
25:00 Explaining/Demonstrating of Features
33:36 Outro
Watch Part 1 here: youtu.be/gaIVzdJ2V5w
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
π Belt Grinder Plans: etsy.com/listing/823825577
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
Time Stamps:
0:00 Introduction
0:39 Machining Flat Platen Frame Plate
4:28 Machining Flat Platen
5:11 Machining Platen Brackets
7:39 Machining Drive Wheel
12:13 Machining Drive Wheel Adapter
15:42 Machining Tracking Pulley
17:53 Machining Pulley Axle
19:21 Machining Platen Pulleys
21:37 Machining Main Clamping Block
24:11 Machining Small Clamping Block
27:03 Machining Table Clamping Rod
28:38 Machining L-Clamping Block
32:45 Machining Large Clamping Rod
35:20 Indexing System Demo / Outro
Since this is a long project this video will be split into three parts.
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
π Belt Grinder Plans: etsy.com/listing/823825577
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
Time Stamps:
0:00 Introduction
2:11 Machining Main Plate
12:16 Machining Belt Tension Column
15:00 Machining Belt Tension Lever
17:11 Machining Attachment Sleeve Top&Bottom
18:42 Machining Attachment Sleeve Side Cover
19:36 Machining Hinges
21:28 Assembling Frame + Belt Tracking Mechanism
24:40 Machining Attachment Arm
28:31 Machining Tension Lever Handle
29:44 Machining Belt Tracking Hinge
31:05 Preparing Parts for Base
32:35 Welding Base
35:47 Assembling Base, Frame and Motor
36:41 Tilting Feature Demo
I was finally fed up with tripods constantly getting in the way of my work, not being able to set up shots the way I want and also having them fall over and risking damage to expensive cameras way too often. So I built a custom camera setup to solve all those problems. With this arm, the camera can be easily moved into almost any position within about a 1-metre radius in front of its base, and the base takes up less floor space than an average tripod while providing a lot more security against tipping over due to the heavy, low base keeping it glued to the ground. It also allows for much more flexible shooting, because you can set up film perspectives like overhead shots, very low shots, filming around/over obstacles and even some moving shots with ease.
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
π PLANS: etsy.com/listing/778053073
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
This process gets pretty annoying and costs some time if you have to change tooling a lot, so I came up with a solution to make it much more convenient and faster.
First I made a combination tool that contains a nicer, adjustable drawbar wrench as well as a spring loaded hammer in one tool, so you can loosen the drawbar and knock out the tool in the same process. In addition, two locking rings on the rigid and rotating part of the spindle provide a quick way to lock the rotation without using any tools. And as an additional feature, screwing the rings together allows to lock the spindle completely solid, which makes it possible to use the quill to cut keyways and similar features into parts features that you would normally need a shaper for.
The idea for the drawbar tool comes from Frank Hoose who's got the same Mill and a great YouTube Channel with tons of cool ideas like this, check him out: youtube.com/channel/UC89zCBbbQ6L3yzu60NP-4Tw
If you're wondering, this mill is a Sieg SX4. The same machine is sold in the US by Grizzly as the Grizzly G0720R
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
So this is a deviation from the video format I used to do so far and I'm interested to hear how the audience likes it. I'm considering making more videos like this that focus on teaching/explaining things more.
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
π PLANS: etsy.com/listing/746194519
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
TIMESTAMPS
0:00 Opening
0:46 Introduction/Backstory
1:46 Bike Overview
2:32 Materials Overview
4:37 Frame Jig
6:26 Cutting Donor Frame
7:30 Building new Downtube
14:45 Adding Gussets
16:03 Building Cargo Bay
18:44 Building Steering Shaft
21:33 Building Steering Linkage
27:42 Building Kickstand
30:57 Frame finishing touches
32:50 Painting
33:57 Making Cargo Bay Cover
34:51 Final Assembly
37:12 Final Words/Ending Montage
------------------------------------------------------
Additional Links:
πAdding disc-brake tabs to a bike frame without using a jig: youtu.be/2nZY3Gfw_gQ?t=523
π· The photo story for my first cargo bike: imgur.com/gallery/DAijq
#lastenrad #cargobike
Last but not least I added proper tool rests to the lower grinder.
Thanks to the rubber feet everything stays in place and there's very little vibration.
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
The table doesn't move at all when you hammer or pull on it. The perfect place to put a vise or larger powertools.
--------------
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
Now I finally did, and since security is not important in this case, and I only need to open it from the outside, I decided to make this slightly impractical door which is based on this door I saw online: youtube.com/watch?v=vhwGwO65z_U
I take no credit for this idea! Just showing you the building process.
Since I get a lot of questions for plans or measurements, I decided to make Plans and Blueprints for most of my builds from now on. I will also soon provide plans for some of my older projects which a lot of people asked for. There's a link to the plans down below.
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
π PLANS: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
I also needed it to be human powered because any kind of motor(even electric) is forbidden on Hamburg waterways inside the city. And you know I'm into bikes so rowing was out of the question - and that's how my biggest project yet started.
Building this took about 4 months, the planning took almost as long because I had to figure out how to build the largest, lightest boat possible within the limitations of my small shop and with the toolset that I have while not spending a fortune on it. I also needed it to be bike transportable because I don't own a car and if I did.. it probably wouldn't fit in anyway.
This is not the perfect boat for everyone but it's what I came up with for my set of circumstances. As with most things I make, I had no real clue about boats before this and I still don't!
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
This is a very common design, you can find many tutorials on how to build these using angle iron as a base. You don't need a mill or lathe for this, you can even build one without welding. This is just my personal take on it. I put three adjustable diagonal supports on it because if you make them this long, they won't be stiff enough unless you use some very heavy gauge material. (If the brake isn't stiff, it will make your bends uneven/inaccurate) So it's a better solution to stiffen them out using these supports, they add a large amount of structure and you can even adjust for a slight bend in your angle iron this way.
-------
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
The mill wasn't in great shape so I decided to do a complete overhaul with the help of a friend. We took everything apart down to the last screw, replaced some things, cleaned and lubed everything and I also decided to give it a new paintjob and add a frequency drive so that there's no need for changing drive belts for different speeds.
I also built a sturdy base with some drawers for it. Welding together square tubing is getting really boring for me too, but this is hopefully the last piece of shop furniture I have to make for a while.
I'm very happy with the result, the mill is nice and heavy (about 400kgs) and has a decent amount of power for nowhere near the price I would have paid for a new mill of comparable size and weight. I will probably make more modifications to it in the future.
If you have any questions about this kind of mill, leave a comment!
---------------
You can support me on Patreon:
patreon.com/philvandelay
Check out my Instagram for more updates:
instagram.com/phil_vandelay
Get a shirt:
teespring.com/de/stores/phil-vandelay
A nice little project to become familiar with the lathe. You can actually buy these adaptors but I have never seen one this long. So I made a custom one because I also wanted to raise the handlebars quite a bit.
You can also put spacers underneath the stem to make it look almost like a "modern" frame.
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
Some machining projects coming soon!
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
I'm a big fan of the Sortimo system but I don't like most racks I have seen people make or buy for them, because they still require you to remove the entire box and place it somewhere. Also they're really expensive.
So I made this quick-access small parts storage rack that fits almost any kind of sorting box or container and is very flexible, while allowing direct, quick access to a bunch of stuff at once due to the large drawers. No more looking for the right box, bringing it to the bench and opening it.
Note that these are NOT Sortimo boxes, they're cheap ones that are similar.
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
And it needed a cheap and sturdy front rack. So I made one from some bike frame scrap pieces I had left from other projects. Total cost: 0β¬!
If you don't want to weld on your fork, adjustable hose clamps with some rubber/inner tube underneath also work for attaching this style of rack.
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
After almost a year I decided to make some improvements and swap all the cheap OSB boards for a better material. The boxes that were just sitting loosely under the benchtop now work as drawers, it got a new vise and a drawer for powertools and charging as well as a place for my air tools.
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
I didn't end up with a lot of salvagable wood after brute-forcing it apart since it had already taken quite a beating in its previous life. but it was enough for a small coffee table. Only took about a day!
Music Credits go to Chillzaki: soundcloud.com/trillzaki
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
The tool rack on top is inspired by Adam Savages creation which I highly recommend checking out:
youtu.be/TWQAYfGxsPE
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
So I decided to make a heavy-duty work stand that won't tip over, won't wobble, is strong enough to hold up 50kg+ Bikes, is still movable with the bike attached, doesn't use much floor space and most importantly, doesn't require you to lift the bike up. It also goes up to a height of over 2 Meters.
The crane mechanism can be operated in two gears, quick for regular (light bikes) or with a low gear for heavy lifting. I can also motorize it with a powerdrill.
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
My goal was to build a new daily ride that is light, fast and agile without cargo but with enough carrying capacity to move most of the tools/materials/people and random junk I need to get from A to B on an average day. With the weather in Hamburg, and the darkness of winter that also meant full fenders, dirt resistant MTB components and very good lights. I managed to incorporate all of this and I'm extremely happy with the result.
This bike is based on the Danish Omnium Cargo - If you're interested in buying something similar, check them out, their bikes are amazing, and if it wasn't for the fun of building, I probaby would have bought one.
http://omniumcargo.dk/
I used Aluminium because I wanted this to be as light as possible and as quick as possible when I'm not moving any cargo. I managed to beat both the steel and the titanium version Omnium makes, with this entire frameset including fork weighing in at 5.51kGs and the complete bike at about 15kg with all the parts. Less than a lot of "normal" bikes - For a cargo bike, it's fast as hell. You can shoulder it and carry it up a set of stairs easily. That being said, this is not a heavy hauler. I've tested it to around 80KGs of cargo in addition to the rider. It's made for light- to medium loads and large volume - which is what this design excels at
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
π§ LINK LIST for tools I use in my videos:
https://hero.page/philvandelay/my-favorite-tools
π Etsy Store / Plans: etsy.com/listing/731222822
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
The tubing I used is AL-6060 because I can't get my hands on high strength alloys (yet.) I use 5356 filler wire and I suspect the frame is 6061 but I can't verify it. I don't do any heat treatment. I have used this bike for a month, it's strong enough to carry an adult in front and I haven't had any issues with cracking. The handling is super snappy!
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
It's essentially just a way to attach tubing of various diameters to a drill press table securely enough so it doesn't move when you use a hole saw on it. It also allows for enough room for the hole saw to travel downwards and the position can be adjusted in all directions, as well as the angle of the cut (by rotating the drill press table). Since the v-shaped brackets aren't welded on, the same jig can also be used to drill into square shaped tubing at almost any angle. You can fit anything up to about 70mm in diameter in there. The blue tube being cut is cromoly steel, which worked fine, as well as aluminium.
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay
π Etsy Store / Plans: etsy.com/shop/PhilVandelay
π SHIRTS / Merch Store: phil-vandelay.creator-spring.com
ππ» Patreon: patreon.com/philvandelay
π· Instagram: instagram.com/phil_vandelay


