Making for Motorsport
The best value 3D scanner on the market? The Creality Pika put to the test....
updated
https://s.zbanx.com/r/BUQ9m9vy6y0P (not an affiliate link)
Link to the .3mf file for the shop vacuum : -
drive.google.com/file/d/1wl57B-q6q14RFGKB3cXFCdsFDo8ss8Wg/view?usp=drive_link
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
patreon.com/Makingformotorsport
If you'd like to get a copy of the scans you can find them on the website here :-
makingformotorsport.com/projects1/re-engineering-the-mini-subframe
00:00 Intro
01:38 Problems
04:11 What is Autotesting
05:13 The Plan
07:24 Scanning
08:54 Assembling the Scans
11:30 Summary
If you want to model along side then the files I used for this are available on the link below...
makingformotorsport.com/projects1/3d-modelling-from-3d-scans
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
0:00 - Introduction
1:21 - Getting the scans and 1st alignment
4:24 - Opening fusion and loading scans
6:15 - Looking for clashes
8:00 - Reducing and simplifying the mesh
10:55 - Creating the working planes
13:55 - Getting information from the mesh
19:20 - Engine side flange
21:25 - Modelling the actual manifold
26.20 - Making, fitting and testing
27:48 - Round up
This unit was provided to me free of charge for review purposes however Shining3D have no editorial rights and my words are my own.
If you would like to purchase a Vega and you'd like to support the channel please consider purchasing via the below affiliate links : -
EU - eu.einstar.com/?ref=O66R9gLL
Use code DAVIDFOX for €50 off!!!
US - einstar.com/?ref=5wdd0HRu
Use code DAVIDFOX-US for $50 off!
The Buy button is at the bottom of the page so scroll down!
(UK buyers will have import tax to pay)
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
00:00 - Intro
02:15 - Unboxing
05:20 - Switch on and Calibration
06:57 - 1st Scan - StarBoy
15:11 - Starvision
20:35 - Gearbox scan
24:31 - Car scans
29:57 - 123 Block accuracy test
32:15 - Summary
This unit was supplied free of charge by Creality but no further money has been received and Creality have no prior approval nor editorial rights on the video.
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
Affiliate links -
Extra 10% off for Raptor 3d scanner, All Stores
Code: RAPTOR10
USA - crealityofficialstore.sjv.io/y2GLVb
UK - crealityofficialstore.sjv.io/6e2q4b
EU - crealityofficialstore.sjv.io/vNebAy
AUS - crealityofficialstore.sjv.io/0Z0OVE
I do a ridiculous number of scans to try and find out if this scanner is the real deal.
This scanner was supplied free of charge by Creality for purposes of review, all words are my own with zero editorial input by Creality and no cash or other payments where received.
If you would like to buy one please consider using the affiliate links below:-
USA - crealityofficialstore.sjv.io/k0LbYV
UK - crealityofficialstore.sjv.io/rQjbYy
EU - crealityofficialstore.sjv.io/an367o
AUS - crealityofficialstore.sjv.io/1rEOJx
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
patreon.com/Makingformotorsport
If you fancy some Merch or just want to know more... check this out below...
makingformotorsport.com
The Range was provided free of charge by Revopoint but they have not editorial rights on my video nor is it pre-approved by them, all thoughts are my own. Any questions on this please check my review policy, which I make every company I work with sign up to, here...
drive.google.com/file/d/1tlsNmxtC1lxBLfNo2zEbwaHuvdxqoN9y/view?pli=1
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
If you want to buy some merch then please visit...
makingformotorsport.com
0:00 Intro
1:28 Unboxing and Software
3:39 Scanning a Person
5:40 Scanning a Car differential
8:12 Scanning Car bodywork
14:07 Summary
patreon.com/Makingformotorsport
If you want to buy some merch then please visit...
makingformotorsport.com
revopoint3d.com/POP3-MakingforMotorsport
And use the coupon code MakingforMotorsport50 to get $50 off!!!! (This isn’t an affiliate link as far as I know but I might be? 🤷♂️ either way you get 50 bucks off so click it!)
If you'd like to support the channel please check out the Patreon or visit the website and buy some lovely merch...
patreon.com/Makingformotorsport
makingformotorsport.com
patreon.com/Makingformotorsport
No affliate link I'm afraid but please let me know if you get one!
If you want Dave to help you get in touch with him here : -
dc-3d-design.co.uk
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
patreon.com/Makingformotorsport
I use Meshmixer, an old Autodesk product, Fusion360 and GOM inspect, full on metrology software.
All this software is free to download and use, you can find the download links below :-
Meshmixer - meshmixer.com
Fusion360 - autodesk.co.uk/products/fusion-360/overview
GOM Inspect - gom.com/en/products/zeiss-quality-suite/gom-inspect-pro
The link to my website is makingformotorsport.com
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
00:00 Intro
02:49 Meshmixer
06:20 Fusion360
10:36 GOM Inspect
22:03 Summary
For full disclosure, I received the CR-Lizard and Einstar for free for review, however I have not let that effect my judgement in the course of this review.
Links
Website - makingformotorsport.com
DC3D website - dc-3d-design.co.uk
Link to the measurement video - ***COMING SOON***
Link to the .stl files - makingformotorsport.com/projects1/get-out-there-n9t2h-nwb3p
Affiliate Links : -
Einstar
EU - eu.einstar.com/?ref=O66R9gLL
Use code DAVIDFOX for €50 off!!!
US - einstar.com/discount/DAVIDFOX-US?ref=5wdd0HRu
Use code DAVIDFOX-US for $50 off!
The Buy button is at the bottom of the page so scroll down! (UK buyers will have import tax to pay)
CR-Scan Lizard and CR-01
US Store - shareasale.com/r.cfm?b=2015992&u=3333216&m=124834&urllink=&afftrack=
EU Store - shareasale.com/r.cfm?b=2131300&u=3333216&m=124834&urllink=&afftrack=
UK store - shareasale.com/r.cfm?b=2179741&u=3333216&m=124834&urllink=&afftrack=
POP2 Amazon affiliate link - amzn.to/3WmnoJ9
00:00 - Intro
01:26 - Face Test
05:05 - Upright
10:19 - Hardware Requirement
12:30 - Front of the mini
16:25 - Accuracy Test
21:33 - Small Decorative Object
27:03 - Software
30:15 - Summary
Lets find out!
If you are interested in buying an Einstar, and would like to support the channel please us the below link :-
EU - eu.einstar.com/?ref=O66R9gLL
Use code DAVIDFOX for €50 off!!!
US - einstar.com/discount/DAVIDFOX-US?ref=5wdd0HRu
Use code DAVIDFOX-US for $50 off!
The Buy button is at the bottom of the page so scroll down!
(UK buyers will have import tax to pay)
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
And check out the other socials aswell!
Instagram - making_for_motorsport
Twitter- @Making4msport
00:00 - Intro
01:03 - Unboxing
03:32 - Calibration
05:48 - 1st Scan
15:25 - 2nd position
24:30 - The purpose of the review
25:53 - Other scans
28:25 - Required Hardware
30:15 - Summary
@LearnEverythingAboutDesign is a fantastic channel, check them out here: - youtube.com/c/LearnEverythingAboutDesign
For clarity, I am part of the Autodesk Creator program however I have received no direct payment, instruction or help to make this video, it is entirely my own work.
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
And check out the other socials aswell!
Instagram - making_for_motorsport
Twitter- @Making4msport
00:00 - Intro
01:10 - Scanning
01:50 - What's the goal and simplifying
04:00 - GOM Inspect and aligning to a coordinate system
06:06 - Import into Fusion360
07:56 - Setting an axis - "the process"
12:20 - Revolving the drive flange
15:49 - Using constraints and measurements in the sketch
18:26 - Modeling the steering arm
26:11 - Modelling everything else
27:30 - Summary
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
Content
00:00 Intro
00:26 Grass Autotest
02:10 MOT Prep
03:37 Sponsor Time!
06:59 MOT
08:30 Checking out the rust
10:10 Outro
patreon.com/Makingformotorsport
Please check out the channel's socials : -
Instagram - making_for_motorsport
Twitter - @Making4msport
In the spirit of full disclosure I have edited a section out of the fuel trim explanation as I got a detail wrong, everyone’s human!
Here's a nice homework link : -
aa1car.com/library/what_is_fuel_trim.htm
0:00 BRAAARRRP!!!
0:17 Introduction
1:00 MAP problems
3:16 Test Drive
5:45 The Science/Magic bit
8:55 The dreaded MOT!
9:45 Other bits…
10:17 How much this costed
10:47 Is it any quicker?
11:37 Round-up
13:02 Hi Tom!
patreon.com/Makingformotorsport
The eSun Carbon Fibre Nylon I used can be found here:-
eSUN Carbon Fiber Filled Nylon Filament 1.75mm, 3D Printer Filament PA-CF, Dimensional Accuracy +/- 0.05mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Natural amazon.co.uk/dp/B07DVY9BLN/ref=cm_sw_r_cp_api_i_CCYJ25V5NH0RG9YPVW3J?psc=1
(Non-affiliate link)
patreon.com/Makingformotorsport
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
00:00 Intro
01:05 The Plan
02:00 Plunge!
03:18 Finding out length
04:41 Cutting and welding
08:52 Checking for straightness
10:16 Welding on the sleeve
11:29 Dye Penetrant Testing
13:01 Will it work?
14:27 Summary
The Kickstarter has now finished for this scanner, if you pledged using the channel link, you rock!!!
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
I scan various parts and then scientifically compare the outputs....
The Kickstarter has now finished, if you supported the channel then a huge thank you!
If you are interested in buying the Lizard then please consider using the below affiliate links:-
US Store - shareasale.com/r.cfm?b=2015992&u=3333216&m=124834&urllink=&afftrack=
EU Store - shareasale.com/r.cfm?b=2131300&u=3333216&m=124834&urllink=&afftrack=
UK store - shareasale.com/r.cfm?b=2179741&u=3333216&m=124834&urllink=&afftrack=
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
Ambiment - The Ambient by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/by/4.0
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100630
Artist: http://incompetech.com
Will it be easy? Or even work at all!
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
0:00 Intro
1:53 Strip down
3:28 How it works currently
6:12 Project Name
7:06 Design
8:30 Trial fit
9:50 Round up
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
00:00 - Introduction
00:44 - The "big" reveal
03:25 - Road test
06:04 - Performance - 0-60mph
08:00 - Performance - 2nd Gear pull
08:24 - Future plans
First video is here : - youtu.be/YBt7YM9BCHA
Link to The Gentlemen's Motor Racing Teams page here : -
youtube.com/c/TheGentlemensMotorRacingTeam
Link to Lars Christensen channel here : - youtube.com/user/cadcamstuff
Chapters
0:00:00 Intro
0:01:50 Steering Wheel Hook
0:27:25 Induction Manifold
1:17:00 Summary
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
Keep your eyes peeled for the 2nd episode in this where I go through even more interesting modelling challenges.
0:00 Introduction
2:32 Software
4:12 The Basics
7:29 Constraints
15:21 Velocity Stacks
40:21 Wrap up
Link for Fusion 360 (non-affiliate)
autodesk.co.uk/products/fusion-360/personal
00:00 Introduction
01:25 Fuel Pump Holder
02:45 Throttle Cable Bracket
03:30 Velocity Stacks
04:25 Materials
08:28 3D Printer
10:11 Induction Manifold
16:08 Round up
Links
Patreon - patreon.com/Makingformotorsport
Velocity Stacks vid - youtu.be/-mY-M3UQggw
Annealing Vid - youtu.be/inuweW63lTI
CF Nylon on an Ender 3 - youtu.be/LqhcmCrlx8o
Throttle Bodies playlist - youtube.com/playlist?list=PLkXjaDpCxSDhmpBgCvWshs0urIBPFvLqC
I look at the current items, design the moulds in 3D, mix up the casting urethane, pour, release, fit and then test the new items...
I used 2-part Casting Polyurethane in Shore A 85 harness... perfect for a fast road setup.... here's a link - I GET NOTHING! :)
ebay.co.uk/itm/264801421262?epid=1850174495&_trkparms=ispr%3D1&hash=item3da76507ce:g:SDEAAOSwIBJaaTLm&amdata=enc%3AAQAGAAACkPYe5NmHp%252B2JMhMi7yxGiTJkPrKr5t53CooMSQt2orsStdebXPz4ZTXCT8FI9kPBhyvhsQJh4%252FYEIMIcT%252BwqcVLRZdstBk098ZvPOjE6sLsTsJ%252BEehO%252BzXqeOFbIMHx%252FGfk3%252BIHMetGsbKU35zm12Hr5Ca2jlZbvMhTo9gaye67zP0pEy1MWRQ5gJel%252FgXSWnU67knlXobyA6agjq0Bmt8eHWYzUIdsGc8DSI8UKpdm2Rp%252B%252BMChQYxa2kP1RlnaA1ZfcD%252BF%252BheISqz47iwbE9Pw5wRhks08g%252B0K2cIN0FPoW1NWLzCl%252FA6fhLhIyT3fs7%252FGcHqPbmjqibRDGy961%252Bo4%252B4eR5jRLkNoGOF35hMTSaHCzCw%252BHe1AR%252FF2Uds8GTPqsSH7D9Clj6Vfb9fe4%252Bhhm5Ns%252BWLXiT1Jg3srgncS7zsX%252FcMHfN9O75cY8YVUIoaBhcqgbe7umWpZaWhN2UjqkDtNm%252BpLN7HxTh2Hwh6EsnJs31S%252FLwlMK28mA%252FpyJL%252BuZK8LMpETnPIx6uYmqQCcYoWFEfSXkIXQZy2V5chPXK6tPtBq05q8YYEqxFaSrXbl4I6hyDChXW76MzePG0pBxo04NVgvcw9ToH2E110Hz9c5S308vaCDvgPuJL648aypIpsCqDUQsQNAZo%252B6LFX3aT%252Fdi0lUnSnTtoYveS%252BI8M7agpnXYi9MvCQi9BrWKbvtbEM15u9wkk3ui7llXiOpcefaA2ZcG1NIs2z0qjDJ2pcZ3I3%252BS0dlmDA4ugo4%252FnnxXpfv2OQvxVxhqnzCsK85svYFR2wP6OHxkQNCwBDGHYkYTHaGyW9xzIvdXB6%252BHVbiEEBm89ttH7WxfZhLZ43OUwCXU8X6FhVHv6DIqT1rI9%7Campid%3APL_CLK%7Cclp%3A2334524
I walk through each step I take to research, design and manufacture some velocity stacks for my motorcycle individual throttle bodies....
If you'd like to support the channel please check out the Patreon...
patreon.com/Makingformotorsport
00:00 Introduction
01:09 What do they do?
03:12 What is pule tuning?
05:02 Taper or Parallel
06:28 Design and Making
09:13 Fitting and Testing
11:30 Summary
Link to the research paper shown in the video...
researchgate.net/publication/296662381_The_Effects_of_Intake_Geometry_on_SI_Engine_Performance
Link a great piece of practical testing by the legendary Dave Walker of Emerald showing maybe taper isn't all that....
emeraldm3d.com/articles/emr-adj-length-intake
Lots of thanks to Alwoodley Motor Club for putting on the event and to Phil and Chris Chapman for some camera work and the thumbnail picture.
If you're interested in Autotesting or other grassroots motorsport in the UK then www.btrda.co.uk is a great place to start...
Link to 2nd Part - youtu.be/NPTkYV23d5A
Link to 1nd Part - youtu.be/Dj_Gan0buW8
Exterior footage from the outside of the mini is from Philip Chapman from Fern Motorsport...
The Speeduino is THE best value standalone out there and it's the cheapest way to get into tuning your own car!
Chapters
0:00 Intro
1:55 Assembly
5:05 Loading the firmware
8:32 Configuring the Speeduino Board
10:51 Configuring the Firmware
13:27 Wiring the Board in
14:20 Running the Car
17:00 Summary
Links
speeduino.com/home
http://www.megamanual.com/MSFAQ.htm
This is only a quick explainer without going into the nitty gritty detail but I just wanted to spread the word!
Links : -
Speeduino Home - speeduino.com/home
DIYEFI - diy-efi.co.uk
Speeudino YouTube page - youtube.com/channel/UCGEpmUxQFMmcKyCW0JLBBaw
Speeduino Clips - youtube.com/watch?v=xgNpUEs6CWE
Speeduino installation - youtube.com/watch?v=iH9lp-Nms-o
Contents
0:00 Introduction
0:46 Dimple Die
2:06 Serious Clamp it Square!
3:09 Thingiverse
3:35 Vice Press Brake
5:35 Drill bit sharpening block
7:09 3/16" Tube Straightener
8:45 Round Up
All of the designs are freely avialable on Thingiverse and Credit has been given on the video directly and the links are below: -
Links
Dimple Die - thingiverse.com/thing:4521017
Square - thingiverse.com/thing:1306832
Vice Press Brake - thingiverse.com/thing:4063689
Drill Sharpener - thingiverse.com/thing:2006453
Tube Straightener - thingiverse.com/thing:4754659
YouTube Channels
BraunsCNC - youtube.com/channel/UCdCSwgleQKbgemTM3zlyflw
Wrench and Chill - youtube.com/channel/UC_SQLSzo4GWHtR7uLVP2vfA
PLEASE BE CAREFUL WHEN TESTING INJECTORS! Loose petrol is very flammable, and live switching the pump can generate sparks - you can see my extinguisher - I had 2! If you have a leak or spill mop it up and come back another day.....
I fit Honda Fireblade throttle bodies to my autotest mini with a 1600cc Vauxhall engine to get the BRARP BRARP noise and, if we get it right a bit more power, MO'POWAH!!!!
Part 1 is available here - youtu.be/Dj_Gan0buW8
Link to the injector sizing page....
http://www.megamanual.com/v22manual/minj.htm#size
Links: -
CNC Kitchens video on annealing materials...
youtube.com/watch?v=vLrISrkg46g
A great piece on annealing of Semi-crystaline polymers (which Nylon is)...
ptonline.com/blog/post/part-3-materials-annealing-tips-for-semicrystalline-polymers
More info on specific annealing for Nylon...
https://rigid.ink/blogs/news/how-to-anneal-your-3d-prints-for-strength
Credit for title sequence slooooo-mooooo - Fern Motorsport
This will be the material for my 3D printed induction manifold for my individual throttle bodies, check out my other videos to see how that project is coming along!
These are not affiliate links, the channel gets nothing from these links, but don’t let that stop you!
Link for the hot end - ebay.co.uk/itm/Schwarz-All-Metal-Titanlegierung-Hot-End-Kit-CR-10-Ender-3d-Drucker-1-75-0-4mm/283874763557?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Link for the Steel nozzles - amazon.co.uk/gp/product/B07J5XCTG7/ref=ppx_yo_dt_b_asin_title_o00_s05?ie=UTF8&psc=1
ModBots video - youtube.com/watch?v=A6Df4I4SXJE&t=531s
Credit for the temp tower, krpavlu @ thingiverse.com/thing:4149643
I fit Honda Fireblade throttle bodies to my autotest mini with a 1600cc Vauxhall engine to get the BRARP BRARP noise and, if we get it right a bit more power, MO'POWAH!!!!
As mentioned, if you are interested in Fusion 360 then check this guy out : -
Lars Christensen
youtube.com/channel/UCo29kn3d9ziFUZGZ50VKvWA
“Sound effects obtained from https://www.zapsplat.com“
Stick around find out....
*N.B. I AM NOT a pro-welder, I'm an amateur with a little experience and a lot of enthusiasm, which I'm guessing is the same for most of the people for are viewing this...
“Sound effects obtained from https://www.zapsplat.com“
Great event, roll on 2021!


