No Lathe Pen Challenge: Making A Feather Quill Kaged Books 2017-02-03 | When Bill Livolsi sent out the No Lathe Pen Challenge, I had a few ideas, but decided to go with making a feather quill just to reach back into the history of writing instruments. I enjoyed making the quill and grinding my own ink, but it definitely gives me a new respect for modern rollerball pens. Bill's Channel: youtube.com/user/johnnyatroposNo Lathe Playlist: goo.gl/FP46f3Big thanks to Ryan from Waylight Creations for the MusicWaylight Creations YouTube: goo.gl/LVcGNe“Jello” by Ryan Bitters (waylightcreations.com)Licensed under Creative Commons: By Attribution 3.0 Licensehttp://creativecommons.org/licenses/by/3.0Social Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Trash to Treasure: Space Inspired Resin Art on an LP Record Kaged Books 2018-04-29 | I created a piece of sun inspired resin art on a old LP record. Sorry to all the Igor Kipnis fans out there for ruining the album. I 'm entering in a couple instructables contest, please vote using the links below!instructables.com/id/Sun-Inspired-Resin-Art-on-an-LP-RecordIt should be there on the contest page now. Or directly under the materials list on the project pageAmazon Wish List: goo.gl/6yQX26TIP JAR: PayPal.Me/KagedCreationsSocial Media Links: KagedCreations@gmail.comYouTube: youtube.com/KagedCreations08XXFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Shiny Aluminium Ball (NEW METHOD) Kaged Books 2018-04-19 | Since I was melting aluminum for my play button project, i decided to jump on this shiny aluminium ball challenge as well! The Japanese method is to use foil and hit it with a hammer a bunch of times and then polish. I chose to go a different route and used scrap aluminum to cast a foam ball into metal and polished that. I likely could have polished more to remove some of the sanding marks but I actually like the handmade look of the scratches so I left them and now this sits on my desk!Amazon Wish List: goo.gl/6yQX26TIP JAR: PayPal.Me/KagedCreationsSocial Media Links: KagedCreations@gmail.comYouTube: youtube.com/KagedCreations08XXFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Aluminium Casting The YouTube Play Button Small Workshop Challenge Kaged Books 2018-04-16 | The Small Workshop YouTube Makers facebook group put up a challenge to make a YouTube Play Button. It's been a while since i've done any metal casting so I dug out the foundry and melted some scrap aluminum for my entry. It didn't come out perfect but it's not the worst. Check out the playlist here:youtube.com/playlist?list=PLPmAOu6hYm1GMmNbMFJNdEjKcFp9pg5Tw&disable_polymer=trueAmazon Wish List: goo.gl/6yQX26TIP JAR: PayPal.Me/KagedCreationsSocial Media Links: KagedCreations@gmail.comYouTube: youtube.com/KagedCreations08XXFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Makers Rock Winner Blink 182 Dude Ranch Kaged Books 2018-04-12 | I used Tube Buddy to draw a winner for my Maker's Rock Album. Thank you to everyone that entered, i learned a lot and look forward to making next year even better!Amazon Wish List: goo.gl/6yQX26TIP JAR: PayPal.Me/KagedCreationsSocial Media Links: KagedCreations@gmail.comYouTube: youtube.com/KagedCreations08XXFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Review: Sticker Mule $9 Custom Packing Tape (Unboxing) Kaged Books 2018-04-05 | Sticker Mule's packaging tape came on sale for $9 a roll and I couldn't pass it up. This is my unboxing and review of the packaging tape. I bought it myself and it is not sponsored in any way. The tape seems to work great and they commonly run promos so i'd recommend signing up for their email list and waiting until it's on sale. Amazon Wish List: goo.gl/6yQX26TIP JAR: PayPal.Me/KagedCreationsSocial Media Links: KagedCreations@gmail.comYouTube: youtube.com/KagedCreations08XXFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Makers Rock Blink 182 Dude Ranch Album Art Collaboration w: Giveaway Kaged Books 2018-03-21 | I'm giving away this recreation of Blink 182's Dude Ranch Album cover. This is my first year participating in the Makers Rock Collaboration, I learned a lot and hope to be better next year. If you'd like to win this just comment "i'm in" below and you'll be entered to win. I may have some bonus prizes too we'll have to see.Other Makers :Check out the other Channels that are involved Awesome Wood Things youtube.com/AwesomeWoodThings1Waylight Creations youtube.com/channel/UC38CQXaEkI4k_sQCIZOJJ0QWoodified youtube.com/woodifiedDylan's DIY Workshop Www.youtube.com/dylansdiyworkshop The Carmichael Workshop youtube.com/user/carmichaelworkshopCarl Jacobson youtube.com/user/haydenHDJP WOODWORK youtube.com/channel/UCw3hBDXx_L_EoSFqqmEuWJQTaste The Code youtube.com/tastethecodeAndrew Settershttps://Www.youtube.com/andrewsettersFun With Woodworking youtube.com/user/FunWithWoodworkingTimberworker youtube.com/channel/UCrGdpu52gnchybQhFOSMCNwMiter Mike's Woodshop youtube.com/mitermikeswoodshopSouthern Ginger Workshop youtube.com/channel/UCWjLRDjbQ9eey8G8oLCTxvgJavi's Wood Shop http://youtube.com/c/javiswoodshopWallman Woodshop youtube.com/c/wallmanwoodshopMake it Soph youtube.com/channel/UCy2WZ1h9A_qKMR_zVXSeTugEscagedowoodworking youtube.com/channel/UCyQ3_78DHg-_DcOY_quMflAportal woodworks youtube.com/channel/UCyg4PuEwcNTSloOZzIVdOhAHarneal Media youtube.com/channel/UCpiWhOVjEVAIlCUPuYLpmKAHerb Lichtenberg youtube.com/herblichtenbergTempleboy Turnings youtube.com/user/stevo15771CharlesDearingScroll youtube.com/user/CharlesDearingScrollMarkLindsayCNC youtube.com/c/marklindsaycncOdessa Woodworking and Maker Shop youtube.com/user/kilroy79763The Woodworking Shed with John Clothier youtube.com/TheWoodworkingShedCross Cut Creations youtube.com/channel/UC54fkSR_LBTnG69wcy8G3GgHighlandboxes youtube.com/c/HighlandboxesWood Frontier youtube.com/channel/UCaSn6Z2xAS5kW8cn5mXSKGgCO Schwenke & Son youtube.com/user/clarkschwenke1SoCoMO woodwork youtube.com/channel/UCCxyDRJwJ9_6OJw0Ce48PrwOJ Woodworking Crafts http://www.youtube.com/c/OJWoodworkingCraftsThe Woogineer youtube.com/channel/UCF0zB_FmO7xkumjrFMHPb4AAlex Krause youtube.com/channel/UClhMySB3K2iKAWQfve_wsCgKNOW WHAT MOM KNOWS youtube.com/c/knowwhatmomknowsAmazon Wish List: goo.gl/6yQX26TIP JAR: PayPal.Me/KagedCreationsSocial Media Links: KagedCreations@gmail.comYouTube: youtube.com/KagedCreations08XXFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Makers Rock 90s Album Art Collab 2018 Promo Kaged Books 2018-03-14 | The 2018 Makers Rock Collaboration is here! The theme is 90s Rock and the album that i'm working on is Blink 182's Dude Ranch. Blink 182 was one of the first concerts I went to and I still enjoy their music. Check out the other Channels that are involved Awesome Wood Things youtube.com/AwesomeWoodThings1Waylight Creations youtube.com/channel/UC38CQXaEkI4k_sQCIZOJJ0QWoodified youtube.com/woodifiedDylan's DIY Workshop Www.youtube.com/dylansdiyworkshop The Carmichael Workshop youtube.com/user/carmichaelworkshopCarl Jacobson youtube.com/user/haydenHDJP WOODWORK youtube.com/channel/UCw3hBDXx_L_EoSFqqmEuWJQTaste The Code youtube.com/tastethecodeAndrew Settershttps://Www.youtube.com/andrewsettersFun With Woodworking youtube.com/user/FunWithWoodworkingTimberworker youtube.com/channel/UCrGdpu52gnchybQhFOSMCNwMiter Mike's Woodshop youtube.com/mitermikeswoodshopSouthern Ginger Workshop youtube.com/channel/UCWjLRDjbQ9eey8G8oLCTxvgJavi's Wood Shop http://youtube.com/c/javiswoodshopWallman Woodshop youtube.com/c/wallmanwoodshopMake it Soph youtube.com/channel/UCy2WZ1h9A_qKMR_zVXSeTugEscagedowoodworking youtube.com/channel/UCyQ3_78DHg-_DcOY_quMflAportal woodworks youtube.com/channel/UCyg4PuEwcNTSloOZzIVdOhAHarneal Media youtube.com/channel/UCpiWhOVjEVAIlCUPuYLpmKAHerb Lichtenberg youtube.com/herblichtenbergTempleboy Turnings youtube.com/user/stevo15771CharlesDearingScroll youtube.com/user/CharlesDearingScrollMarkLindsayCNC youtube.com/c/marklindsaycncOdessa Woodworking and Maker Shop youtube.com/user/kilroy79763The Woodworking Shed with John Clothier youtube.com/TheWoodworkingShedCross Cut Creations youtube.com/channel/UC54fkSR_LBTnG69wcy8G3GgHighlandboxes youtube.com/c/HighlandboxesWood Frontier youtube.com/channel/UCaSn6Z2xAS5kW8cn5mXSKGgCO Schwenke & Son youtube.com/user/clarkschwenke1SoCoMO woodwork youtube.com/channel/UCCxyDRJwJ9_6OJw0Ce48PrwOJ Woodworking Crafts http://www.youtube.com/c/OJWoodworkingCraftsThe Woogineer youtube.com/channel/UCF0zB_FmO7xkumjrFMHPb4AAlex Krause youtube.com/channel/UClhMySB3K2iKAWQfve_wsCgKNOW WHAT MOM KNOWS youtube.com/c/knowwhatmomknowsAmazon Wish List: goo.gl/6yQX26TIP JAR: PayPal.Me/KagedCreationsSocial Media Links: KagedCreations@gmail.comYouTube: youtube.com/KagedCreations08XXFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
DIY Scrap Wood Valentines Day Hearts - Multiple painting methods Kaged Books 2018-02-14 | For Valentine's Day I made a bunch of heart decorations for my daughter. I used scrap wood and a few different painting methods to get this done. One method I used was fluid art, you can find more of that on my second channel linked below!Kaged Art:youtube.com/channel/UC8BxkigV0yLkHg-C5sOa48AAmazon Wish List: goo.gl/6yQX26TIP JAR: PayPal.Me/KagedCreationsSocial Media Links: KagedCreations@gmail.comYouTube: youtube.com/KagedCreations08XXFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
DIY Shop Sign From An Old Tree Saw; TMA January Build Off Kaged Books 2018-01-30 | The Tool Masters Assocaitions holds monthly build offs and for January the challenge was to create a sign. I choose to make a shop sign based off my logo. This was a saw that had sat outside for years and was rusted, chipped, even a couple cracks, full restoration was not an option. Amazon Wish List: goo.gl/6yQX26TIP JAR: PayPal.Me/KagedCreationsSocial Media Links: KagedCreations@gmail.comYouTube: youtube.com/KagedCreations08XXFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Stormlight Giveaway Results Kaged Books 2018-01-03 | Congratulations to the winner!Amazon Wish List: goo.gl/6yQX26TIP JAR: PayPal.Me/KagedCreationsSocial Media Links: KagedCreations@gmail.comYouTube: youtube.com/KagedCreations08XXFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Simple DIY Cement Coaster Kaged Books 2017-12-05 | I wanted to make a set of simple cement coasters. I used quikcrete rapid cement and a silicone mold on these. Gave them a quick sand with 220 grit and they were good to go. You may see these as part of an upcoming project if that experiment works out. Amazon Wish List: goo.gl/6yQX26TIP JAR: PayPal.Me/KagedCreationsSocial Media Links: KagedCreations@gmail.comYouTube: youtube.com/KagedCreations08XXFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEjMusic:Lion's Heart by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com
Bridge Four Insignia; Purpleheart with Milliput inlay; Stormlight Archives Giveaway (Ended) Kaged Books 2017-11-20 | Brandon Sanderson is one of my all time favorite authors and he just released the latest book in his Stormlight Archive Series. This series is what inspired this project. It is the symbol for Bridge Four carved into a piece of purpleheart and inlaid with Milliput. In addition to the project i'd like to get someone else into the series and am giving away one of the books. It will be the winners choice which one they want (only book 1 or 2 will be signed, book 3 will not)All you need to do to enter is comment which book you'd like and follow this link to the giveaway. I've found Gleam allows me to fairly draw a random winner. Due to shipping I have to limit this to US only at this time. I will draw the winner on December 15, 2017gleam.io/jMXdv/stormlight-archive-book-giveawayyoutube, facebook, instagram, etc is not associated with this giveawayAmazon Wish List: goo.gl/6yQX26TIP JAR: PayPal.Me/KagedCreationsSocial Media Links: KagedCreations@gmail.comYouTube: youtube.com/KagedCreations08XXFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEjMusic:“Into The Night” by Ryan Bitters (http://waylightcreations.com)Licensed under Creative Commons: By Attribution 3.0 Licensehttp://creativecommons.org/licenses/by/3.0
Penturning: Black and Green Pen Kaged Books 2017-11-07 | It's been a while since i've done a pen turning video; so here is a quick one, outlining how I turned this bolt action pen. I was told the green and black give it a tactical appeal. Let me know what you think!Amazon Wish List: goo.gl/6yQX26TIP JAR: PayPal.Me/KagedCreationsNOVA Unboxing: youtube.com/watch?v=Z-KSLF2LiR0Social Media Links: KagedCreations@gmail.comYouTube: youtube.com/KagedCreations08XXFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Absract Art: Resist Painting With Spray Paint & Dish Soap Kaged Books 2017-10-20 | There have been a lot of really cool art projects using resin. I'd like to do one of those eventually but for now I looked for a cheaper solution. This method of Resist or Relief painting uses spray paint base a base and then layering dish soap to displace the top layer. Let me know what you think. Amazon Wish List: goo.gl/6yQX26TIP JAR: PayPal.Me/KagedCreationsSocial Media Links: KagedCreations@gmail.comYouTube: youtube.com/KagedCreations08XXFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Shop Tools: Unboxing the Nova Comet II Wood Midi Lathe Kaged Books 2017-10-12 | I've upgraded my lathe from the harbor freight 10x18 lathe to the Nova Comet II. In this video I unbox this lathe and go over the components that it comes with. The variable speed is going to really be a big help on future projects. I'm going to hang onto the HF lathe and use it for drilling for now but when I eventually get a buffing system it'll be dedicated to that. TIP JAR: PayPal.Me/KagedCreationsAmazon Wish List: goo.gl/6yQX26Social Media Links: KagedCreations@gmail.comYouTube: youtube.com/KagedCreations08XXFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Shop Tools: Toro Ultra Plus Leaf Blower Model 51621 Unboxing & Review Kaged Books 2017-09-12 | A unboxing, overview, and review of the Toro Ultra Plus Leaf Blower Model 51621. This is a versatile economy leaf blower/vacuum that provides decent air pressure and suction for your average home owners needs. I purchased at Home Depot for under $100TIP JAR: PayPal.Me/KagedCreationsSocial Media Links: KagedCreations@gmail.comYouTube: youtube.com/KagedCreations08XXFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Pallet Wood Name Plate Pallet Upcycle Challenge 2017 Kaged Books 2017-08-31 | This is my entry into the 2017 Pallet Upcycle challenge. It is more a proof of concept. I wanted to take my child's handwriting and make it into a plaque. I want to get a proper wood burner and redo this on a nice piece of cherry to use for the door to her room. If you want to send me a wood burner here's the link to my amazon wishlist haha :http://a.co/ap0byPTSimply Wooden Creations: youtube.com/channel/UCPpl82DjTAi-lqPHZ5o8GNgPlaylist:youtube.com/playlist?list=PL2DsxEWIzTVL5h2C6zxVc2sdZoJ6WN2sOSterling Davis:youtube.com/user/SterlingsWoodcraftsTIP JAR: PayPal.Me/KagedCreationsSocial Media Links: KagedCreations@gmail.comYouTube: youtube.com/KagedCreations08XXFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEjMusic:“Move Along” by Ryan Bitters (http://waylightcreations.com)Licensed under Creative Commons: By Attribution 3.0 Licensehttp://creativecommons.org/licenses/by/3.0
The Dark Tower Woodburning From Page To Life KA Kaged Books 2017-08-07 | I just finished reading The Dark Tower series by Stephen King and really enjoyed it so I wanted to make something from the series. I haven't had a chance to check out the movie yet but I hope to soon. Ka is a concept that encompasses the whole series. It is both simple and complex you could call it fate, but one of the best explanations I've seen on it is: Ka signifies life force, consciousness, duty, and destiny. It is both fate and destiny, or the accumulated destiny and accumulated debt of many existences. We are the servants of Ka, but we are also its prisoners. Ka's one purpose is to turn, and we turn with it....The Dark Tower.TIP JAR: PayPal.Me/KagedCreationsSocial Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Skull Challenge 2017: Carving a Skull Into Wood (Then BURNING it) Kaged Books 2017-07-31 | My entry into Shogun Jimi's Skull Challenge. I originally wanted to do a Dark Tower related project but that didn't turn out, I may still post it later. This project is a quick skull carving. I was planning on burning the inside of the carving and sanding off the outside so the colors would be inverse but once I started to burn I liked how it looks. TIP JAR: PayPal.Me/KagedCreationsShogun Jimi: youtube.com/user/shogun21jimiSkull Playlist: youtube.com/playlist?list=PLp1gai6QjnefwwhGO6VlyW7ZYmCy7iVO1Social Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Resin Casting: Making Silicone Molds with Alumilite Amazing Mold Rubber Kaged Books 2017-07-20 | With Alumilite's Amazing Mold Rubber you can literally clone anything in resin. I want to use resin for Shogun-Jimi's Skull Challenge so I got some practice in using a 3D printed Fidget Spinner and Halo logo along with one of my Marine Corps Challenge coins. I'm pleased with the results and looks forward to using this in the Skull Challenge. Mold Rubber used: http://www.michaels.com/10324147.htmlSocial Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEjMUSIC:“Jinx” by Ryan Bitters (http://waylightcreations.com)Licensed under Creative Commons: By Attribution 3.0 Licensehttp://creativecommons.org/licenses/by/3.0
Where Have I Been??? Channel Update Kaged Books 2017-07-06 | Social Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Glass Etching Wheel of Time Quote Armour Etch Giveaway (ended) Kaged Books 2017-05-22 | I decided to try some glass etching and it was really easy and a lot of fun. The quote is from one of my favorite book series, The Wheel of Time Series by Robert Jordan and Brandon Sanderson. I'm also giving away a bottle of the Etching Cream so someone else can try it out. Along with the Armour Etch i'll send out some stickers as well. The giveaway ends May 31, 2017.Giveaway Link: goo.gl/ZIX88igleam.io/awA85/kaged-creations-glass-etching-giveawayMusic:“Cream Cheese” by Ryan Bitters (waylightcreations.com)Licensed under Creative Commons: By Attribution 3.0 Licensehttp://creativecommons.org/licenses/by/3.0Social Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Quick Tip: Wooden Bench Vise Soft Jaws with MAGNETS! Kaged Books 2017-05-08 | I needed to ensure that I didn't damage a piece of wood holding it in my estate sale vise so I made some magnetic soft jaws for it really quickly. Social Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Almost Useless Challenge: Not DiResta Wooden Ice Pick Kaged Books 2017-05-01 | Javi's Wood Shop put out an almost useless challenge and I thought an ice pick made out of wood might be pretty useless. At least I can use it on cheese. Big shout out to Daylight Creations for the appropriately named music. Music:“Make My Own” by Ryan Bitters (http://waylightcreations.com)Licensed under Creative Commons: By Attribution 3.0 Licensehttp://creativecommons.org/licenses/by/3.0Check out the playlist:youtube.com/playlist?list=PLA7yUiI0_mTzHIXW2ABcDwpiu2VlinQ9nSocial Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
How To: Design a 3D Printed a Fidget Spinner Using FUSION 360 Kaged Books 2017-04-19 | Fusion 360 is an easy tool to learn and worked great for designing this 3D printed Fidget Spinner. Social Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
DIY Food Safe Wood Finish Kaged Books 2017-03-03 | There are things in the kitchen that we use everyday that you wouldn't want to put certain finishes on. I wanted something I could use to help extend the life of items I use everyday so I made this "food safe" * wood finish.I used Mineral Oil, Beeswax, and Essential Oils to create this finish. *This is not government or anyone else approved food safe, just ingredients that I feel comfortable having near my food. If you choose to use it please be mindful of this and use common sense. Thank you Waylight Creations for the Music!“Echoed” by Ryan Bitters (http://waylightcreations.com)Licensed under Creative Commons: By Attribution 3.0 Licensehttp://creativecommons.org/licenses/by/3.0Social Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
DIY Bath Bombs Valentines Day Challenge Kaged Books 2017-02-17 | Shogun Jimi is hosting a Valentine's Day Challenge and even though Valentines day isn't something we normally do in my house I wanted to get in on the challenge. So with it being to cold to keep my daughter out in the shop, I decided to do something else fun with her and made DIY bath bombs. Supplies:Baking Soda 1/2 cupCitric Acid 1/4 cupCornstarch 1/4 cupEpsom Salt 1/4 cupvegetable oil 3 tspEssential Oil 1 tsp (I used Lavender) Food ColoringWater 1 tbs Challenge Playlist: goo.gl/o53j0DMusic:“Denial” by Ryan Bitters (http://waylightcreations.com)Licensed under Creative Commons: By Attribution 3.0 Licensehttp://creativecommons.org/licenses/by/3.0Social Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Quick Tip: Fast Snow Removal With A Toro Leaf Blower Kaged Books 2017-01-31 | I needed to clear the snow off the cars and couldn't find the brush. So I just grabbed the leaf blower and went to town. Worked out great.This is the Toro Ultra Plus Leaf Blower Model # 51621 and i'll have a full review on it probably next week.Social Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Swirl It 02: Hydrodipping Dollar Store Christmas Ornaments Kaged Books 2016-12-16 | I wanted to get a quick project done before I head down to Florida. I grabbed some cheap Christmas Bulb Ornaments from the dollar store, busted out the spray paint and tried to put a swirl on it. They didn't turn out perfect but still look cool. For some reason I don't think the red spray paint I was using worked well with this method so I probably won't use that paint again in the future. Amazon Wish List: goo.gl/6yQX26 TIP JAR: https://PayPal.Me/KagedCreationsSocial Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Crossbow test shot Kaged Books 2016-12-06 | Crossbow test shot to add to the end of my instructable Social Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
3D Printed YouTube Play Button Christmas Tree Ornament Kaged Books 2016-12-01 | I've recently gone over 300 subs and I'm really thankful for that. I decided I wanted to have my own play button. I just added a 3D printer to my shop so I decided to go that route. I also wanted to enter the Christmas Ornament Challenge hosted by Alan Stratten and Carl Jacobson. I originally wanted to turn an ornament but it didn't go well, so this is my 11th hour entry. Alan's Website: http://www.AsWoodTurns.comCarl's Website http://www.TheWoodShop.tvWhere to submit video: http://www.AsWoodTurns.com/ChallengesI got the YouTube Play Button model from Thingiverse - 1700793http://www.thingiverse.com/thing:1700793Joe's Channel: youtube.com/channel/UCDQGdvrCKyfFRqjeMEr50oQSocial Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Marine Corps Dress Blues Inspired Cufflinks From Pen Blank Cutoffs Kaged Books 2016-11-14 | To Celebrate the Marine Corps Birthday I had my buddy Zac at NV Woodwerks make me some custom blanks to represent the Blood Stripe. I auctioned one of the pens off to support the Semper Fi Fund and this video is me using the cut offs from that pen to create a set of Cuff links. What is a Blood Stripe?Marine Corps tradition maintains that the red stripe worn on the trousers of officers and noncommissioned officers, and commonly known as the “blood stripe,” commemorates those Marines killed storming the castle of Chapultepec in 1847.Zac's Channel: goo.gl/ZFFzvF Zac's Website: goo.gl/Yg6cD6Social Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Applying a CA Glue Finish to a pen Kaged Books 2016-11-04 | A demonstration of how I apply a CA glue finish on a pen. I'm making an instructable to go along with this please check it out: goo.gl/6XUAfFSocial Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEjMusic:Lion's Heart by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com
Zombie Weapons Challenge From Spoon to Crossbow bolt Kaged Books 2016-10-23 | My entry into the Zombie Weapons Challenge is a crossbow bolt made from a spoon and dowel. This challenge is being hosted by Mike Fulton and there are a lot of great videos in the playlist, check out the link below. He created this challenge as a way to acknowledge the season premier of The Walking Dead. Zombie Weapons Challenge Playlist : goo.gl/EQYC6mSocial Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEjMusic:Medium Rock by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com
Penturning 03: Vertex pen for Instagram Giveaway Kaged Books 2016-10-18 | I made a Magnetic Vertex Pen for a giveaway over on my instagram page. This is one of my favorite kits and i use a similar pen for my EDC (Every Day Carry) pen. I’ve hit over 1000 followers over there and I just wanted to show a small token of appreciation. Any of my youtube subscribers that would like to enter will get a double entry if they leave a comment with their instagram username below. Thank you Everyone for the support you’ve shown me. Social Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEjMusic:Lion's Heart by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com
USB Hub Challenge - Concrete Table; Inspired by Giaco Whatever Kaged Books 2016-10-06 | A few weeks ago Giaco Whatever put out a video over on the MAKE: channel, wherein he created a concrete USB drive. That video was met with a lot of hate and discontent. As a community we thought this was an unfair judgment on his creativity, and decided we would make our own USB hubs to show support. This is my contribution a concrete side table that doubles as a USB hub. Giaco's Channel:goo.gl/LB7JO8MAKE: Video:goo.gl/IBDAfI#USBhubchallenge playlist:goo.gl/h4eipEHairpin Legs:goo.gl/zuK3G6Social Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEjMUSIC:George Street Shuffle by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1300035Artist: http://incompetech.com
Concrete & Firewood Business Card Holder Kaged Books 2016-09-23 | I have an upcoming project using concrete, before working on that I wanted to make sure I knew how to use concrete, so i did a couple test. I decided to turn the test into something useful by grabbing a piece of firewood and creating a business card holder. Social Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEjMusic:Medium Rock by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...) Artist: http://audionautix.com
Pallet Wood Project - Seahorse - Pallet Up Cycle Challenge 2016 Kaged Books 2016-08-30 | My entry into Sterling Davis' Pallet Upcycle Challenge 2016. I picked up a pallet and cut out some of the slates and transformed it into a seahorse (not to be confused with a starfish). Step by Step instructions can be found on instructables:instructables.com/id/Pallet-Wood-SeahorseSterling Davis' Channel: goo.gl/viF8KaPallet Upcycle Playlist: goo.gl/VfLGsLMake A Wish: goo.gl/midaUGSocial Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEjMusic:“My Doodle” by Nighthawk Music is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0 )Artist: Nighthawkhttp://www.wackywoodworks.co.nz/music/songs.php
Testing - homemade beeswax BLO finish Kaged Books 2016-08-01 | This is just a test of my homemade beeswax / Boiled Linseed Oil Finish. Adding one coat to this piece of Granadillo wood. This was also just me testing uploading directly from the iPhone
ToolMake16: DIY Center Punch : Scratch Awl Kaged Books 2016-07-24 | My entry into Mitch Peacock's ToolMake16. Originally I intended to make a an icepick. However I went with a 7 mm 01 Tool Steel rod and i think it's just a little too thick. These turned into more of an scratch awl/center punch, still a useful tool. I choose to make one out a acrylic and another inspired by David Waelder's icepick, using a bullet casing from a 30-30. Step-By-Step Instrucable:http://www.instructables.com/id/DIY-Scratch-Awl-2-WaysMitch Peacock's Announcement:youtube.com/watch?v=uVqnXJ6lXMQ&feature=youtu.be ToolMake16 Playlist: youtube.com/playlist?list=PL86lqISCtD7qoSotUQA3LmPWxe_P_n22RDavid Waelder's Icepick:youtube.com/watch?v=D0PQ905KQnw“Odin Experiemrnt” by Nighthawk Music is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0 )Artist: Nighthawk http://www.wackywoodworks.co.nz/music/songs.phpSocial Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Penturning 02: How to Turn a Princess Style Pen Kaged Books 2016-06-13 | Turning a Princess Style Pen using my new carbide cutter from Tommy G's Workshop. In this video I go step by step on how to turn a pen on a lathe. Tommy G's website:http://goo.gl/PmqiBzTommy G's Channel: goo.gl/2L36F5Social Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEjMusic:Dispersion Relation by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100258Artist: http://incompetech.com
Shop Tools: WEN 10 Band Saw Unboxing and first cuts Kaged Books 2016-05-02 | Unboxing of the WEN Model 3962 10-Inch Two-Speed Band Saw with Stand and Worklight. This setup was fairly easy taking about 25 minutes in real time to set up without the stand. I have bolted this saw directly to my workbench. At the end i make a few test cuts and it works quite nicely. If there are any questions i'd be happy to answer them.3.5 amp motorcuts up to six inches deep and 9-3/4 inches wideUses 72-inch blades anywhere from 1/8 to 1/2 inches in size 14-1/8 x 12-1/2 inch work table bevels up to 45 degreesOperates at two speeds of either 1520 or 2620 FPMIncludes, a work light, a 3-in-1 dust port, a fence and a miter gaugeSocial Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEjMusic:Double Blues by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com
Swirl It 01: Hydro Dipping Test Kaged Books 2016-04-16 | I've been seeing hydro dipping around lately and wanted to give it a try. This is just a test to see if the method works as advertised. I'd say it does, the process is simple:1) Get a bucket of warm water2) Spray the paint into the water in succession of colors 3) Slowly lower object into the paint at an angle 4) Use something to move the top layer of paint and quickly pull out the object Social Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
Carving 01: First Wooden Spoon Kaged Books 2016-04-11 | This is my very first attempt at carving a wooden spoon. I had some challenges and made some mistakes along the way; but all and all I think it turned out well. Always looking for feedback and ways I can improve so i'd love to hear from you.Social Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEjMusic:Happy Bee by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1300014Artist: http://incompetech.com
Challenge Tree 2016: Ugly Vase Ugly Flower Kaged Books 2016-03-30 | This is my entry in the Challenge Tree 2016 contest hosted by Dominic Bender. I was going to turn a larger vase or a goblet on the lathe, but ran into some issues and ended up finishing up on the belt sander. Moral of the story is plan for your deadlines early and don't push things until the last minute. Dominic's Channel: youtube.com/channel/UCgZ9nzgoprssuV-DmInENSAChallenge Tree Playlist: youtube.com/watch?v=SQ6nkgdruUk&list=PLxZz9NOCW96SiEjfkhXvL7hdCRFiJhakFSocial Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEjMusic (1st song):El Magicia El Magicia by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100242 Artist: http://incompetech.com
DIY: Beeswax and Oil Wood Finish Experiments Kaged Books 2016-03-15 | In this video I go through the process of creating my own DIY beeswax wood finishes, and then testing each of those finishes. I would appreciate if viewers could let me know if they like A or B better. I'm going to try to use a Poll Card for the first time, so look for that in the video. For these waxes I'm experimenting with different ratios of Boiled Linseed Oil and Danish Oil. I'm hoping to find just the right ratio to make the wax firm but flexible. I'm going to try a few more times until I get it just right. I may also try it with Tung Oil in the future. Poll Starts: @1:00How-To Starts: @1:22Items Used:Beeswax: http://amzn.to/22j9oy3Linseed Oil: http://amzn.to/1:t1ZsCDanish Oil: http://amzn.to/22j9UvPInstrucable: http://www.instructables.com/id/DIY-Beeswax-and-Oil-Wood-Finish-ExperimentsSocial Media Links: KagedCreations@gmail.comFacebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEjMUSIC:Medium Rock by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...) Artist: http://audionautix.com
Shop Tools: Cleaning up my ADI Dia- Vac vacuum pump Kaged Books 2016-03-08 | To get into wood stabilizing/casting I needed a vacuum pump. Instead of buying a new one, be dug through my father-in-law's shed to find one he's had sitting for years. It runs but doesn't pull air. This video is me trying to get it cleaned up and creating a vacuum. The Vacuum Pump is made by Air Dimensions Incorporated, and is from their Dia-Vac line. Model Number: M01310N. The best I can tell it is a late 70s/early 80s pump. I've reached out to ADI and asked if they have a manual but no response to date.I also mention that I will be taking part in a google hangout with some other newer YouTubers with special guest on Friday 3/11/16 at 10:00 PM Eastern. It's Being hosted by:Deemer Designs : https://www.youtube.com/channel/UCIIy...Other Channels:Mike Kapotsy : youtube.com/user/mgkapotsy5x30 woodworking: https://www.youtube.com/channel/UCiE_...Make It Mazzeo: https://www.youtube.com/channel/UCr8c...I also have an instrucable that goes with this project: http://www.instructables.com/id/Cleaning-Out-a-ADI-Vacuum-PumpSocial Media Links: Facebook: goo.gl/3EBL8WInstagram: goo.gl/1GQPKEInstructables: http://goo.gl/1zatg6Twitter: goo.gl/7XaBEj
