Griffin Dual-Lok 5/7 - Overview Capitol Armory 2022-11-08 | RETENTION, DURABILITY, AND STILL LIGHTWEIGHTThe Griffin Dual-Lok 7 can handle up to 300 PRC, has no minimum barrel length restrictions, and still barely tips the scales at under 13 ounces with the mount. This is due to a tubeless design which Griffin has been refining for over a decade. The reduction in material allows for a lighter can with more internal volume, but at the cost of extensive research and development. Even with no outer tube, the Dual-Lok series is tougher than most competing silencers, even those with nearly double the weight. Innovation with manufacturing and design provides consistency, and enough confidence that Griffin stand's behind the can with a perpetual lifetime warranty. While the Dual-Lok 7 works on a bolt-gun, it's most at home on commonly used semi-automatic rifles. If it's a traditional AR-15 in 5.56 or an AR-10 in 6.5 Creedmoor, suppression and backpressure are optimized. The ECO-FLOW technology reduces flash, suppresses well, and has minimal blowback. This all comes together to provide a much more enjoyable, and quiet, experience for the shooter. The patent pending front cap reduces any remaining flash, allowing for ideal use in low-light conditions or under night vision optics. The Dual-Lok system is integrated into the silencer body to provide maximum accuracy and enhance durability. A precision taper interface between the muzzle device and mount keeps POI shift consistent and repeatable. An ACME thread allows for both a quick install and attachment without errors. Positive spring tension uses a redundant locking collar to provide a secondary retention method. The anti-rotation teeth ensure the silencer doesn't back off under even the most extreme circumstances. AVAILABLE IN BLACK AND FLAT DARK EARTH FEATURESWear-free mounting systemFull-auto ratedRated up to 300 PRCDurable 17-4 Stainless constructionEndcap is flash reducing and flow optimizedPerpetual lifetime warrantyNo minimum barrel lengths WHAT'S INCLUDEDDual-Lok 7.62 SilencerGriffin pouch5/8x24 Dual-Lok Minimalist BrakeGriffin pouch COMPATIBLE ACCESSORIESDual-Lok CompensatorsDual-Lok Flash HidersDual-Lok Muzzle Brakes VIDEOSGriffin Sound TestingDual-Lok 5 and 7 Launch VideoDual-Lok 5 and 7 Tutorial Video
Dead Air Sierra 5 - Overview Capitol Armory 2022-11-02 | INTRODUCING THE SIERRA 5Introducing Dead Air's 5.56 silencer, the Sierra 5. Dead Air's mission has always been to give No Quarter in design, performance, and technology. The Sierra 5 takes this into account, and gives shooters everything they have been asking for in a dedicated 5.56 silencer.Built with professionals in mind, there is no compromise to durability, flash suppression, or decibel reduction. It still maintains a small footprint, and minimal weight. As many shooters desire different types of mounting options, the Dead Air Sierra 5 is HUB compatible (1.375"x24) to accept a variety of mounts. I can be configured to the users specific needs, and is available in both Xeno and Key-Mo versions out of the box. As with Dead Air's other hard-use silencers, it features welded Stellite baffles. The Sierra 5 is then wrapped with a stainless outer tube for extra support. Visually it is a clean, utilitarian knurled design that provides both form and function. The Dead Air Sierra 5 is compatible with Dead Air Key-Mo (Omega), SilencerCo Omega / Hybrid ASR, Plan B by Q, and any other mounting systems that fit the SilencerCo Omega, SilencerCo Hybrid, or Energetic Armament VOX. This allows the shooter to adapt the Sierra 5 to whatever mounting system they see fit for a specific task or rifle. Additionally, the Dead Air Sierra 5 uses Sandman Front Caps, Flash Hider Front Caps and is compatible with the Dead Air E-Brake. CAPITOL ARMORY'S THOUGHTSThe Sierra 5 is one of the silencers that doesn't really need explanations, sales pitches, or much at all said about it. Dead Air took everything that people have been asking for and delivered. Flash hiding front cap by default, mounting options for any specific task, no barrel length restrictions, and still not too big or heavy. It's simply a check list of what folks need in a modern day 5.56 silencer. Unless you've got some very unusual needs, the Dead Air Sierra 5 will surely cover all the bases for 5.56 use. FEATURESRated up 2200+ ft lbs of enegryNo minimum barrel length restrictions13.3oz with Xeno, 15.4oz with KeyMoCompatible with "Bravo" mounting solutionsCompatible with Sandman front capsLifetime warrantyWHAT'S INCLUDEDMounting system of your choiceOne 1/2x28 Flash HiderSuppressor manualDead Air decalMaintenance tools COMPATIBLE ACCESSORIESDead Air Titanium Direct Thread MountsDead Air E-BrakeDead Air Key-Mo (Omega Variant)Dead Air Key-Mount Flash HiderDead Air Key-Mount Muzzle BrakeDead Air Xeno (Omega Variant)Dead Air Xeno Muzzle BrakeDead Air Xeno Flash HiderDead Air Front Cap Removal ToolDead Air Sandman Front CapsDead Air Sandman Flash Hider Front CapsSilencerCo Omega / Hybrid ASRPlan B by Q
TBAC Fly 9 - Overview Capitol Armory 2022-10-31 | LIGHTEST IN CLASSThunder Beast designed the Fly 9 with the same philosophy as their ULTRA series. Lightweight, high-performance, but still as compact as possible. The ULTRA series comes in various sizes, but the Fly 9 includes multiple length options right out of the box. It can be run in a 7" version, which is still smaller than many competitors. A module can be removed, dropping it down to only 4.4" long and still hearing safe with many types of ammo. This gives users the option between ultra-quiet and ultra-small, depending on their needs.TBAC is known for light suppressors, and their newest pistol option doesn't disappoint. The full titanium construction puts the Fly 9 on the scale at 7.9 ounces. That includes the piston and mounting hardware. This is 3-6 ounces lighter than most of the competition. In addition to 9mm, the Fly 9 is rated for 300 Blackout supersonic on 8" and longer barrels and subsonic on 5.5" barrels. It can also handle 350 LEGEND if used on a 16" barrel. The pistons were designed to be compatible with other common industry leaders. The Fly 9 can use Thunder Beast pistons but is also compatible with ones made by Rugged and SilencerCo. CAPITOL ARMORY'S OPINIONLight pistol cans are a bit of a misunderstood topic. Many people don't think 3 or 5 ounces is a big deal when putting on the end of a pistol, as the can "ruins the balance anyway" or "it's not that big of a difference. In those aspects, they are correct. What isn't talked about are the two main reasons for light can on a pistol. Better cycling and less mass affecting recoil. The lighter the silencer, the less "bounce" it has after a shot. Combined with both a long and a short configuration, it's the best of both worlds. The Fly 9 checks many important boxes for a great-sounding, great functioning 9mm suppressor. FEATURESFull titanium silencer construction17-4 stainless pistonFull-auto rated for 9mmConfigurable length, 4.4 to 7 inches long7.9 ounces in weightBlack cerakote finishRated for 9mm, 300 Blackout, and 350 LegendCompatible with SilencerCo and Rugged accessoriesThreaded "Alpha" WHAT'S INCLUDED1/2x28 pistonFixed barrel spacer
Griffin Bushwhacker 36 - Overview Capitol Armory 2022-10-27 | The Griffin Armament Bushwhacker 36 is a smaller version of their universal Bushwhacker 46. It has all the strengths of its bigger brother but in a smaller package. While it can't do the 45 caliber projectiles, it is able to suppress everything else more efficiently. Able to silence everything from 22LR to 9mm and more, most other rifle suppressors can't even quiet down a fraction of the calibers the Bushwhacker can. The larger bore diameter not only allows the Bushwhacker to be versatile, but it also provides a lower backpressure environment. This translates to less blowback, and less ejection port noise when used on semi-automatic rifles. The mount shares the same thread pitch as some other suppressors and is compatible with any Bravo-style mounting system.CAPITOL ARMORY'S OPINIONThe Griffin Bushwhacker 36 is one of the most versatile cans on the market. It solves quite a few issues that plague many competing multicaliber offerings. It can be disassembled, allowing for use with cast lead projectiles and 22LR. Very few centerfire rifle silencers have this feature. It can handle 9mm in addition to common rifle calibers, allowing it to be used on both pistols and subguns. Another overlooked caliber choice would be 38 Special, which suppresses extremely well out of a lever gun. Being compatible with "Bravo" or "Omega" style mounts also means you can use the Bushwhacker 36 with Griffin's mounting systems, or your favorite 3rd party offering. FEATURESRated on rifles from .22 up to 338 Lapua.Rated on pistols up to 9mmStainless tube and bafflesUser serviceableSupports Taper Mount, Piston, and 3-Lug mounting systemsPatented HEDP baffle technology1.375x24 for other mounting optionsWHAT'S INCLUDEDSuppressorBooster housing assembly5/8x24 BrakeMaintenance toolsPlan A mounting systemSuppressor PouchCOMPATIBLE ACCESSORIESGriffin Taper Mount Minimalist BrakeGriffin Taper Mount Minimalist Flash HiderGriffin Taper Mount Flash SuppressorGriffin Taper Mount Flash CompGriffin Taper Mount Muzzle BrakeGriffin Revolution PistonsGriffin Revolution Fixed Barrel MountGriffin Revolution 3-lug mountGriffin 3-lug Barrel Adapter (if using 3-lug mount)Griffin Revolution Fixed Barrel SpacerSilencerCo Bravo ASR MountPlan B by Q (Bravo, Omega 300 variant)Dead Air Key-Mo (Bravo, Omega 300 variant)Dead Air Direct Thread MountSilencerCo Bravo Direct Thread MountTitanium Direct Thread Mount
Fingerprinting - Do It Yourself at Home! Capitol Armory 2021-10-13 | IMPORTANT LINKS Full Instruction page - capitolarmory.com/blog/fingerprinting.html Hair Color Chart - capitolarmory.com/NonMage/docs/Fingerprint_Hair_Code_Table.jpgEye Color Chart - capitolarmory.com/NonMage/docs/Fingerprint_Eye_Color_Table.jpgRace Chart - capitolarmory.com/NonMage/docs/Fingerprint_Race_Code_Table.jpgCounty Code List - capitolarmory.com/NonMage/docs/state_cntry2000.pdfSHIPPING ADDRESSCAPITOL ARMORY2000 WINDY TER #1ACEDAR PARK, TX 78613AT HOME FINGERPRINT KITCan't make it to our shop or another location to get your fingerprints done? Purchase our fingerprint kit to print yourself and any other responsible persons in the comfort of your home.Our kit includes one ink pad and three FD-258 cards. Simply print yourself at home (see video instructions) and mail us one completed fingerprint card per responsible person (co-trustee.) Once your fingerprints are received by Capitol Armory, we will digitize them and keep them on file so you won't have to fingerprint yourself again.When you purchase a NFA item at Capitol Armory, we will send you full details on how to obtain fingerprints and how to create your profile in our system using our web-based wizard. With our wizard and fingerprint kit, you can still purchase your favorite NFA items and start the process without ever leaving your home!We'll keep everything on file digitally so you'll only have to do this one time, making subsequent purchases a breeze.PACKAGE CONTAINS:One ink padThree FD-258 fingerprint cards (extras for mistakes)Return envelope and postage
SilencerCo Hybrid 46M Overview Capitol Armory 2021-10-12 | SILENCERCO'S MOST VERSATILE CAN - PREORDER YOURS TODAY!The Hybrid 46M from SilencerCo has more caliber options than you can dream of. It's a modular, fully welded silencer designed to handle everything from 9 to 45 on handguns and subguns, 5.56 to 300 Win Mag on rifles, the hotter larger rifle rounds such as 338 Lapua, and even big bore cartridges like 45-70, 458 SOCOM, and more. It handles virtually everything except rimfire, and does it like a champ. Like the Omega 36M, the Hybrid 46M can be configured between a full size and a compact version. This lets the shooter have a full-size decibel reduction king, or a shorter can when size matters.It's not a heavy can, but the 46M can still take a beating. It's lighter than many cans in class, but still full auto rated and can suppress some of the hottest, hardest hitting calibers out there. The Hybird 46M uses the "Charlie" mounting system. This is the same system found on SilencerCo's Saker series, Chimera, and Omega 36M. The 46M ships with a Charlie ASR mount, allowing it to mate up to the most popular QD system on the market. It's completely user-configurable and can be adapted to use direct thread, pistons, 3 lug, and many more. The industries most versatile, modular, and truly multi-caliber silencer has arrived. CAPITOL ARMORY'S OPINIONThe Hybrid 46M is one of the most versatile silencers we have come across. The front caps, mounting system, and length can all be adjusted to suit the individual users own needs. The caliber range it can use is impressive to say the least, and it doesn't disappoint on any of them. The ability to put on different front caps allows smaller projectiles like 5.56, 204, or 6mm to do very well out of a .46 caliber silencer. There are three categories where the Hybrid 46 rises to the top. The first being obvious- multicaliber usage. For someone looking to suppress a huge number of different firearms, it can handle the job. Secondarily, it is extremely good at taming larger rifle rounds like 45-70, 458 SOCOM, 450 Bushmaster, and even our personal favorite 45 Long Colt. The third area where it really shines is on 45 caliber subguns and pistol caliber carbines. It was one of the best sounding silencer's we've heard on our Kriss Vector in 45. FEATURESModular in lengthFull-auto ratedUser-customizable with mounts, length, and front capStellite blast baffleCompatible with Charlie / Saker accessoriesLargest list of caliber compatibility in classOptimized for large bore use WHAT'S INCLUDEDCharlie ASR mount.46 flat front capSilencer toolsSuppressor pouch and manual COMPATIBLE ACCESSORIESCharlie ASR Mount, Trifecta Mount, YHM Mount, 51t Mount, Charlie Direct Thread, Dead Air Key-mo, Plan-B by Q, Charlie Booster AssemblyCharlie flat front caps, Charlie flash hider front cap, Charlie standoff front capASR flash hider, ASR muzzle brake, ASR single port brakeSilencerCo 3-lug Mount
Dead Air Primal - Pistol Mounting Options Capitol Armory 2021-09-15 | PRIMALThe Primal from Dead Air Silencers is optimized for large bore and high pressure rifles, but versatile enough to even be used on your pistol. It's able to handle virtually every caliber you may own. The extreme versatility allows the Primal is accomplished by the large .46 bore diameter, as well as the 1.375x24 thread pitch in the rear portion of the can. This is the same thread pitched used by the popular Nomad series of silencers from Dead Air, and many other competing products as well.For those looking for accuracy, the Dead Air Xeno system can be used. For those wanting speed and elegance, the Keymo mounts can also be quickly and easily installed. Aside from these quick disconnect solutions provided by Dead Air, they also make a variety of direct thread mounts. As this is an industry standard thread pitch, the Primal can also host a tremendous amount of 3rd party offerings. If the ability to use nearly every rifle mounting system on the market isn't enough, the new "HUB to P-Series" adapter is included in the box. This adapter is used to convert the Primal to utalize the same accessories made for the Wolfman and Ghost. Be it a piston system for you handgun, or a 3-lug mount for your subgun the Primal has you covered. Just about the only thing the Dead Air Primal can't do is 22LR, but the Dead Air Mask can easily solve that problem! CAPITOL ARMORY'S OPINIONThe Primal offer's ultimate versatility, but more importantly it's Dead Air's first silencer designed for large caliber suppression. It brings them into the world if quieting down larger calibers like .338, but also silencing 458 SOCOM, 450 Bushmaster, and our personal favorite 45-70 out of a lever gun. Large and heavy projectiles at subsonic speeds are an absolute joy to shoot, and with Dead Air making them quiet it provides one of the most enjoyable firearms experiences out there. It's larger volume also makes the Primal shine on subguns and pistol caliber carbines. It can be quickly put on an MP5, B&T APC45, or an LWRC SMG, providing great decibel reduction, lower backpressure, and accommodating calibers larger than the Wolfman can handle. Combine this with the "Bravo" thread pitch in the mount and you have a silencer that fits many roles, and does a great job at them. FEATURESNo minimum barrel lengths17-4 Stainless constructionRated for 458 SOCOM, 450 Bushmaster, 45-70 and other big bore calibersRated for 5.56 to 338 Lapua for centerfire riflesRated for 9x19 to 45ACP for pistolsCompatible with all "Bravo" style mounting solutions WHAT'S INCLUDED5/8x24 Direct Thread mountHUB to P-Series adapter (for use with booster and 3-lug adapters)Maintenance wrenchesInstruction manual COMPATIBLE ACCESSORIESDead Air Titanium Direct Thread MountsDead Air E-BrakeDead Air Key-Mo (Omega Variant)Dead Air Key-Mount Flash HiderDead Air Key-Mount Muzzle BrakeDead Air Xeno MountDead Air Xeno Muzzle BrakeDead Air Xeno Flash HiderDead Air Front Cap Removal ToolDead Air Sandman Front CapsDead Air Sandman Flash Hider Front CapsDead Air Booster AssemblyDead Air 3-Lug MountDead Air PistonsSilencerCo Omega / Hybrid ASRPlan B by Q VIDEOSDead Air Primal OverviewRifle Mounting Options
Dead Air Primal - Rifle Mounting Options Capitol Armory 2021-08-31 | PRIMALThe Primal from Dead Air Silencers is optimized for large bore and high pressure rifles, but versatile enough to even be used on your pistol. It's able to handle virtually every caliber you may own. The extreme versatility allows the Primal is accomplished by the large .46 bore diameter, as well as the 1.375x24 thread pitch in the rear portion of the can. This is the same thread pitched used by the popular Nomad series of silencers from Dead Air, and many other competing products as well.For those looking for accuracy, the Dead Air Xeno system can be used. For those wanting speed and elegance, the Keymo mounts can also be quickly and easily installed. Aside from these quick disconnect solutions provided by Dead Air, they also make a variety of direct thread mounts. As this is an industry standard thread pitch, the Primal can also host a tremendous amount of 3rd party offerings. If the ability to use nearly every rifle mounting system on the market isn't enough, the new "HUB to P-Series" adapter is included in the box. This adapter is used to convert the Primal to utalize the same accessories made for the Wolfman and Ghost. Be it a piston system for you handgun, or a 3-lug mount for your subgun the Primal has you covered. Just about the only thing the Dead Air Primal can't do is 22LR, but the Dead Air Mask can easily solve that problem! CAPITOL ARMORY'S OPINIONThe Primal offer's ultimate versatility, but more importantly it's Dead Air's first silencer designed for large caliber suppression. It brings them into the world if quieting down larger calibers like .338, but also silencing 458 SOCOM, 450 Bushmaster, and our personal favorite 45-70 out of a lever gun. Large and heavy projectiles at subsonic speeds are an absolute joy to shoot, and with Dead Air making them quiet it provides one of the most enjoyable firearms experiences out there. It's larger volume also makes the Primal shine on subguns and pistol caliber carbines. It can be quickly put on an MP5, B&T APC45, or an LWRC SMG, providing great decibel reduction, lower backpressure, and accommodating calibers larger than the Wolfman can handle. Combine this with the "Bravo" thread pitch in the mount and you have a silencer that fits many roles, and does a great job at them. FEATURESNo minimum barrel lengths17-4 Stainless constructionRated for 458 SOCOM, 450 Bushmaster, 45-70 and other big bore calibersRated for 5.56 to 338 Lapua for centerfire riflesRated for 9x19 to 45ACP for pistolsCompatible with all "Bravo" style mounting solutions WHAT'S INCLUDED5/8x24 Direct Thread mountHUB to P-Series adapter (for use with booster and 3-lug adapters)Maintenance wrenchesInstruction manual COMPATIBLE ACCESSORIESDead Air Titanium Direct Thread MountsDead Air E-BrakeDead Air Key-Mo (Omega Variant)Dead Air Key-Mount Flash HiderDead Air Key-Mount Muzzle BrakeDead Air Xeno MountDead Air Xeno Muzzle BrakeDead Air Xeno Flash HiderDead Air Front Cap Removal ToolDead Air Sandman Front CapsDead Air Sandman Flash Hider Front CapsDead Air Booster AssemblyDead Air 3-Lug MountDead Air PistonsSilencerCo Omega / Hybrid ASRPlan B by Q VIDEOSDead Air Primal Overview
Dead Air Nomad-Ti Overview Capitol Armory 2020-06-24 | A LIGHTER NOMADThe Dead Air Nomad Ti takes the great size and performance of the Nomad-30 and reduces the weight. At only 9.6 ounces, it's one of the lightest centerfire rifle silencers on the market, and certainly the lightest in class. The Nomad Ti retains the same mounting system compatibility as the original and 'L' variants. The tubeless design allows for optimization of internal volume while keeping weight to a minimum. While the Nomad Ti is shipped with a 5/8x24 titanium direct thread mount, it's also compatible with Dead Air Key-Mo (Omega), SilencerCo Omega / Hybrid ASR, Plan B by Q, and any other mounting systems that fit the SilencerCo Omega, SilencerCo Hybrid, or Energetic Armament VOX. The user can quickly adapt the Nomad to whatever system appropriate for the task. The Dead Air Nomad Ti uses Sandman Front Caps, Flash Hider Front Caps and is compatible with the Dead Air E-Brake. CAPITOL ARMORY'S OPINION While the Nomad was extremely successful, some shooters wanted an even lighter suppressor. The Nomad-Ti takes the same great profile and sound signature reduction of the Nomad 30, and put's it in a package made purely from titanium. This shaves off quite a bit of weight, but doesn't reduce performance at all. The trade-off is durability, as it is not full auto rated and does have barrel length restrictions. The Nomad-Ti is made to sound good, accept a variety of mounting solutions, and be as light weight as possible. It's right at home on a long-range bolt gun or hunting setup. For those looking for more durability (with an added weight penalty) the Nomad 30, Nomad L, or Sandman series are available. While it's not as tough as some other Dead Air offerings, it's still more than robust enough to stand up to multiple lifetimes of shooting. FEATURESRated up to .300 Norma Mag16" minimum barrel lengthOnly 10 ouncesKey-mount QD system compatibleCompatible with Bravo mounting solutionsCompatible with Sandman front capsLightest suppressor in classWHAT'S INCLUDED5/8x24 Direct Thread mountHardcaseSuppressor manualDead Air decalMaintenance tools COMPATIBLE ACCESSORIESDead Air Titanium Direct Thread MountsDead Air E-BrakeDead Air Key-Mo (Omega Variant)Dead Air Key-Mount Flash HiderDead Air Key-Mount Muzzle BrakeDead Air Front Cap Removal ToolDead Air Sandman Front CapsDead Air Sandman Flash Hider Front CapsSilencerCo Omega / Hybrid ASRPlan B by Q
SilencerCo Charlie Mount Tip Capitol Armory 2020-04-29 | The SilencerCo Charlie is actually a three part design. Many people don't realize this, and think their new mount won't fit. In this video we look at a quick mounting swap to see a resolution for one common issue.The Charlie mounting system is used in the Saker series, Chimera, and the latest Omega 36M. Why purchase from Capitol Armory?We have the necessary knowledge to support our customers - no other dealer can match that. In a niche market where service matters, we deliver strong! We are experts in managing the complicated NFA process and make the process painless with our proprietary software created to make NFA purchases easy for you.Our online system features:Simple, one page checkout that is safe and secure.BATFE fees are automatically applied to your cart.Secure document storage of your information: trust, fingerprints, data. Submit once and never submit for subsequent purchases!Digital signatures for all parties (don't need to be present to sign) and the new ATF barcode.Form 1 processing We take the complexity out of the NFA process and back it with selection, competitive pricing and the service you expect.Browse our products and you'll notice we carry most major NFA brands, including AAC, Daniel Defense, Dead Air, Energetic Armament, Gemtech, Griffin Armament, Liberty Suppressors, Noveske, Q, Rugged, SureFire, Sig Sauer, SilencerCo, and Thunder Beast. About Capitol ArmoryCapitol Armory is the nation's largest dealer specializing in NFA / Class 3 weapons, specifically suppressors. We are SilencerCo and Dead Air's largest retail and law enforcement / military dealer and offer the industry's best customer service, pricing and selection. We accomplish this with technology to make the complicated NFA process easy for the end consumer. Capitol Armory has been serving customers nationwide since 2009 and is based on the edge of Austin in Cedar Park, Texas.
Quick Clips - Dead Air Pistol Mounts Capitol Armory 2020-04-07 | In this video we discuss Dead Air's mounting solutions for their pistol suppressors. These include the Ghost, Wolf 9 SD, and Wolfman. While there is more information than presented in this quick video, it's main purpose is to demonstrate the anatomy of their suppressors, and how to swap parts between a setup for a Browning action style pistol, and a firearm with a fixed barrel.
Fingerprints At Home - An Easy How-To Guide Capitol Armory 2020-03-23 | In this video we take a quick look at how to take fingerprints at home. While it seems like a daunting task at first, it's really quiet easy. We look at the basic information to fill out in the top portion, codes for things such as hair color, eye color, and race, as well as a quick overview on how to do the physical prints.More art than science, the best way to learn to do the actual prints is to sit down with an ink pad and scrap paper. It's much easier than many people think, however due to individual differences there is some trial and error to see what works best for you. The below is a complete guide published by the FBI on the criteria for fingerprints. It is overly in depth and can be used as a supplemental resource should people desire additional documentation and guidance on the process. capitolarmory.com/NonMage/docs/fingerprintcard_guidelines.pdf
SilencerCo Omega 36M 338 Testing Capitol Armory 2020-01-30 | Omega 36M Part 1 video - youtu.be/gbB2elxkEyASILENCERCO'S LATEST RELEASEThe Omega 36M from SilencerCo is a modular, fully welded suppressor designed to handle a huge variety of calibers. While it can do the traditional 5.56 to 300 Win Mag like other suppressors in class, the Omega 36M can also accommodate larger projectiles such as 9x19, 350 Legend, 357 Magnum, and even 338 Lapua Magnum. In addition to the shooter being able to easily use the Omega 36M on their host firearm of choice, they can also adjust the length to suit their specific needs. Roughly 2" can be removed from the front, bringing the suppressor from just under 7" all the way down to 4.9".Constructed from Titanium, Cobalt 6, and Inconel, the Omega 36M can stand up to a substantial amount of abuse. Even being able to withstand that abuse, it comes in at almost half the weight of the Chimera. In it's full size configuration it has a base weight of 11.9 ounces and it can be dropped to a base weight of 9.2 ounces in the shorted variant. The mounting system on the Omega 36M is a departure from both the Omega 300 and Omega 9K/45K. It uses a Charlie mounting system, so existing Saker/Chimera mounts are compatible. It ships with a Charlie ASR mount, allowing for easy attachment to the most common muzzle device in the industry. In addition to the existing mounts for the Saker and Chimera, the Omega 36M is also compatible with the new 3-Lug and Piston systems to allow for use on 9mm subguns and handguns. FEATURESShorter and lighter than other's in classFull-auto and magnum ratedStellite blast baffle for durabilityCompatible with the industry's most common mounting system - ASRReplaceable end capsCompatible with all Charlie / Saker accessoriesCan be used with an extensive caliber listWHAT'S INCLUDEDCharlie ASR mount30 caliber flat front capTools for usabilitySuppressor pouch and manual COMPATIBLE ACCESSORIESCharlie ASR Mount, Trifecta Mount, YHM Mount, 51t Mount, Charlie Direct Thread, Dead Air Key-moCharlie flat front caps, Charlie flash hider front cap, Charlie standoff front capASR flash hider, ASR muzzle brake
SilencerCo Omega 36M Overview Capitol Armory 2019-11-20 | SILENCERCO'S LATEST RELEASEThe Omega 36M from SilencerCo is a modular, fully welded suppressor designed to handle a huge variety of calibers. While it can do the traditional 5.56 to 300 Win Mag like other suppressors in class, the Omega 36M can also accommodate larger projectiles such as 9x19, 350 Legend, 357 Magnum, and even 338 Lapua Magnum. In addition to the shooter being able to easily use the Omega 36M on their host firearm of choice, they can also adjust the length to suit their specific needs. Roughly 2" can be removed from the front, bringing the suppressor from just under 7" all the way down to 4.9".Constructed from Titanium, Cobalt 6, and Inconel, the Omega 36M can stand up to a substantial amount of abuse. Even being able to withstand that abuse, it comes in at almost half the weight of the Chimera. In it's full size configuration it has a base weight of 11.9 ounces and it can be dropped to a base weight of 9.2 ounces in the shorted variant. The mounting system on the Omega 36M is a departure from both the Omega 300 and Omega 9K/45K. It uses a Charlie mounting system, so existing Saker/Chimera mounts are compatible. It ships with a Charlie ASR mount, allowing for easy attachment to the most common muzzle device in the industry. In addition to the existing mounts for the Saker and Chimera, the Omega 36M is also compatible with the new 3-Lug and Piston systems to allow for use on 9mm subguns and handguns. FEATURESShorter and lighter than other's in classFull-auto and magnum ratedStellite blast baffle for durabilityCompatible with the industry's most common mounting system - ASRReplaceable end capsCompatible with all Charlie / Saker accessoriesCan be used with an extensive caliber listWHAT'S INCLUDEDCharlie ASR mount30 caliber flat front capTools for usabilitySuppressor pouch and manual COMPATIBLE ACCESSORIESCharlie ASR Mount, Trifecta Mount, YHM Mount, 51t Mount, Charlie Direct Thread, Dead Air Key-moCharlie flat front caps, Charlie flash hider front cap, Charlie standoff front capASR flash hider, ASR muzzle brake
Rugged Radiant Overview Capitol Armory 2019-10-09 | Quick OverviewLIGHTER WEIGHT, RUGGED DURABILITY The Rugged Radiant762 combines extreme durability in a light weight package. At only 12.5 ounces in the full length and 9.4 ounces in the shorter configuration, the Radiant762 is the lightest suppressor in it's class. Stellite construction where needed ensures it will stand up to hard use, and titanium components assist to keep weight at an absolute minimum. The Radiant ships in the full size 7.5" setup, however the end module can be removed to convert it into a 5.1" suppressor with ease. This allows the shooter to choose between a compact and ultra-compact suppressor depending on their needs. CAPITOL ARMORY'S OPINIONMany shooters enjoy the extreme durability and modularity of Rugged's line of suppressors. While their popularity grew due to their line's strong points, their benefits came at the cost of weight. Rugged wasn't known for a light weight solution, causing some dedicated Rugged consumers to lean towards other brands. To answer this, Rugged came out with the Radiant. As light as many full titanium cans, the Radiant boasts the full-auto durability and has no minimum barrel length restrictions. For someone looking for harder use can where they want to save on weight, the Radiant is worth consideration. FEATURESLight weight. 9.5 ounces short, 12.5 ounces longTitanium and stellite constructionRated up to 300 RUMFull auto ratedUnconditional lifetime warrantyNo minimum barrel length restrictionsWHAT'S INCLUDEDLightweight 5/8x24 M2 Brake (If 5/8x24 Muzzle Brake is selected)End cap removal toolCOMPATIBLE ACCESSORIESShort flash hider, Scar flash hiderMuzzle BrakeFlat End Cap
Rugged Oculus Overview Capitol Armory 2019-08-30 | TWO CANS IN ONEThe Rugged Oculus 22 is a modular rimfire suppressor, rated for extreme amounts of abuse. Configurable between 3.25" and 5.25" lengths, the Oculus is able to suit different shooters needs. Featuring ADAPT technology, shifting between the long and short configurations is simple and quick. Be it industry-leading performance with no first round pop, or an ultra-compact footprint, the Oculus delivers. CAPITOL ARMORY'S OPINION The Oculus 22 features class leading suppression and zero noticeable first round pop in the long configuration. Should your mission demand something a bit shorter, the Oculus 22 is modular and allows the end user an easy switch-over to a "K" or shorter configuration. Doing so, reduces the length 2" to an overall length of 3.25" with a weight of 4.3 oz. Given this little can's 17-4 stainless construction, the Oculus 22 keeps the Belt Fed Rating rugged is famous for. If you're looking for a multi-caliber 22 suppressor that can be run hard, take a hard look at the Oculus 22. Should you beat on it too much, Rugged offers an unconditional lifetime warranty.FEATURESConfigurable from 3.25" to 5.25" in lengthWeighs as little as 4.3 oz.Supports: 22 LR, 22 WMR, 17 HMR, 17 WSM, 5.7x28mmUser ServicableNo first round popWHAT'S INCLUDED1/2x28 direct thread mount22 caliber end capTools for usabilityManualSticker
Rugged Obsidian 9 Overview Capitol Armory 2019-06-24 | SUBCOMPACT FEATURES AND PERFORMANCEThe Rugged Obsidian 9 is a full auto rated 9mm silencer that is able to handle 22LR and subsonic 300 Blackout as well. It's user-configurable design allows shooters to utilize industry-leading suppression in the full size format, or run it in an extremely short 4.85" length. The Obsidian 9 has a 17-4 stainless steel baffle stack housed inside a hard coat anodized aluminum tube with a black Cerakote finish. CAPITOL ARMORY'S OPINION Rugged's latest suppressor entry, the Obsidian 9 does not disappoint. It offers fantastic suppression in the long configuration and one of the shortest options in the "K" configuration. Just like its bigger brother, the Obsidian 45, is user serviceable allowing you to shoot 22lr or non-jacketed rounds through it. If you do clean it, the click together baffle system prevents carbon build up between the tube and the baffle stack; which will ease the cleaning process. The Obsidian 9 maintains Rugged's "Belt Fed Rating" for 9mm and 300 BLK subsonic rounds and does this while weighing as little as 8.7 oz. Just like the Obsidian 45, the Obsidian 9 utilizes most SilencerCo pistol suppressor accessories for compatibility.FEATURESOne of the best 9mm offerings for a pistolConfigurable from 4.85" to 7.8" in length - ADAPTReplaceable end capsUser serviceable121dB-135dB sound reductionWHAT'S INCLUDEDYour choice of piston. 1/2x28 standard9mm caliber end capTools for usabilityManualSticker COMPATIBLE ACCESSORIESObsidian PistonObsidian Fixed barrel mountObsidian Fixed barrel spacerObsidian 3-Lug mountSilencerCo pistol accesories
Guide to Form 1 on EForms Capitol Armory 2019-03-02 | In this video we discuss how to file a Form 1 on the new ATF EForms system.Although the video demonstrates filing for a Short Barrel Rifle by using a trust, it can be applied to other Form 1 filings as well.
Dead Air Nomad Overview Capitol Armory 2018-11-08 | INTRODUCING THE NOMADThe Dead Air Nomad-30 is a lightweight and versatile suppressor with a modular mounting system. Designed for a variety of uses, at only 14 ounces it's light enough for hunting rifles but durable enough to withstand aggressive schedules of fire. It's tubeless design allows for additional weight savings, while maximizing internal volume. The Nomad-30 features a stainless steel body, with titanium direct thread mount and titanium front cap. The Nomad is shipped with a titanium 5/8x24 direct thread mount, but is compatible with Dead Air Key-Mo (Omega), SilencerCo Omega / Hybrid ASR, Plan B by Q, and any other mounting systems that fit the SilencerCo Omega, SilencerCo Hybrid, or Energetic Armament VOX. This allows the shooter to adapt the Nomad to whatever mounting system they see fit for a specific task or rifle. Additionally, the Dead Air Nomad uses Sandman Front Caps, Flash Hider Front Caps and is compatible with the upcoming Dead Air E-Brake. FEATURESRated up to .300 Win MagNo minimum barrel length restrictionsOnly 14 ounces in weightKey-mount QD system compatibleLifetime warrantyCompatible with Sandman front capsWHAT'S INCLUDED5/8x24 Direct Thread mountHardcaseSuppressor manualDead Air decalMaintenance tools COMPATIBLE ACCESSORIESDead Air Titanium Direct Thread MountsDead Air E-BrakeDead Air Key-Mo (Omega Variant)Dead Air Key-Mount Flash HiderDead Air Key-Mount Muzzle BrakeDead Air Front Cap Removal ToolDead Air Sandman Front CapsDead Air Sandman Flash Hider Front CapsSilencerCo Omega / Hybrid ASRPlan B by Q
SilencerCo Switchback Overview Capitol Armory 2018-10-26 | UNPARALLELED RIMFIRE CUSTOMIZATIONThe SilencerCo Switchback 22 is an extremely versatile and customizeable rimfire silencer. The Switchback has four unique configurations that can be tailored to the shooter's specific needs. In it's short configuration, it comes in at just 3.2 ounces and 2.5" long. At that length, it is still more quiet than many 9mm suppressors when used on a 22LR rifle. It's medium configuration adds an ounce in weight, and is still only 3.59." The medium configuration brings 22LR pistols well into the hearing-safe category, and 22LR rifles on par with many competing rimfire suppressors. In addition to length, it features two configurations optimized for maximum decibel reduction on either pistols or rifles. In the full length pistol configuration, it reduces the report to 114 dB. By rotating the baffle orientation in the longer module, 22LR can be reduced to 108 dB in a rifle. CAPITOL ARMORY'S OPINIONThe SilencerCo Switchback offers solutions to many rimfire shooter's needs. The titanium tube keeps weight down, while the stainless baffles provide rugged durability to support full auto use, as well as being rated for 5.7. The different configurations allow optimization of the Switchback 22, but not just based around length. Some desire an ultra short 22LR suppressor to keep their rifle at the minimum length. Other's prefer a mid-length size, providing good decibel reduction without unnecessary length. Both of these can be covered easily by the SilencerCo Switchback. Additionally, the baffles can be re-orientated in the longer module, allowing for maxim reduction tailored to either rimfire pistols or rifles. While changing configurations is not necessary, it does help the shooter maximize the performance for their specific task.FEATURES3.2 to 6.5 ounces depending on configurationMicro configuration at only 2.5" longMedium configuration of 3.59" and 4.3 ouncesFull-auto ratedRated up to 5.7User serviceableCan be optimized for pistol or rifle useStainless steel and titanium build INCLUDESSuppressorInstruction manual1 size 13 Viton O-ring (installed)2 wrenchesRifle thread spacerCOMPATIBLE ACCESSORIESWalther P22/S&W M&P22 AdapterSilencerCo FN 5.7 AdapterSig Sauer & GSG 1911 .22LR AdapterSig Mosquito Thread AdapterRifle Thread SpacerM&P 22 Compact AdapterGemtech Universal Rimfire QDACMMG FNH PS90 Thread AdapterCZ 452 Adapter1/2x28 to 1/2x28 Rimfire ExtensionUmarex/Colt/416 Thread Adapter
Energetic Armament Vox-S Overview Capitol Armory 2018-10-22 | LIGHTWEIGHT, DURABLE, QUIET. NO COMPROMISE. Energetic Armament is disrupting the norm with the next level of precision engineered rifle silencer. The Vox is CNC welded from C300 Maraging, a nickel-cobalt superalloy. Developed by NASA to meet extreme high-tempature stress recquirements, the aerospace alloy has an incredible strength to weight ratio. At 1,000 degrees Fereinheit the Vox's material is stronger than both stainless steel or titanium at room tempature. With no compromise in material, the Energetic Armament Vox has the reduced weight of a titanium suppressor with the full-auto capabilities of much heavier silencers. In the direct thread configuration, the Vox weights in at just 12.4 ounces. Compatible with SilencerCo ASR and Dead Air Key-Mo, the user is able to chose the desired mounting system for their needs. This eliminates the need to purchase additional muzzle devices for shooters already invested in one brand. Optional wipes can be used with the Vox to increase preformace with sub-sonic rounds. The wipe creates a seal around the exiting projectile to quiet the shot down even more. FEATURESLight weight - 12.4 ounces with Direct Thread mount5.9" lengthWelded Core - C300 Nickel-Cobalt MaragingCompatible with SilencerCo Omega / Hybrid MountsCompatible with Dead Air Key-Mo systemRated up to 300 RUMNo barrel length restrictionsStandard reconfigurable wipe nose INCLUDESStickerAnti-seizeMaintence tool COMPATIBLE ACCESSORIESSilencerCo ASR MountSilencerCo ASR Muzzle Brake / Flash HiderDead Air Key-MoDead Air Muzzle Brake / Flash HiderSilencerCo Direct Thread Mount
Dead Air Odessa 9 Overview Capitol Armory 2018-07-18 | The Dead Air Odessa-9 is a completely modular pistol suppressor, allowing the shooter to fully customize the length to a specific need. 11 different configurations allow the user to find their perfect balance between length and dB reduction. With just 4 baffles and subsonic ammunition, the Odessa-9 is just below hearing safe. In this configuration, it is close to the Dead Air Mask in overall size.Coming in at just 1.1" in diameter, the Odessa-9 also allows for a clear sight picture without the need to alter the factory sights on a pistol. The Odessa-9 is compatible with both SilencerCo and Rugged pistons.Contact UsPhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.comwww.capitolarmory.com
Thunder Beast Ultra Series Overview Capitol Armory 2018-05-25 | The Thunder Beast Ultra series are extremely light weight suppresses popular with precision shooters and hunters alike. Great performance, minimal POI shift, and a variety of lengths and calibers make TBAC Ultra suppressors an option that should be on every serious shooters radar. www.capitolarmory.com
Pistol Suppressor Mounting Options Capitol Armory 2018-04-13 | In this video we take a look at the multiple mounting options for pistol caliber suppressors.This includes pistons, fixed barrel spacers, fixed barrel mounts, and 3-lug. In addition to discussing what options are available, we also explain why a user may need a specific mounting system for their suppressor.
NG2 Defense Maxflo 3D Overview Capitol Armory 2018-03-21 | The NG2 (NEXGEN2 Defense) MAXFLO 3D is a reimagionation in how a rifle silencer should be designed. The Advanced Flow Dynamics system provides a zero back-pressure system. The lack of back-pressure results in a reduction in port noise, absense of blow-back, and maintains the natural cyclic rate of automatic rifles when adding a suppressor. The MAXFLO 3D removes the need to re-tune a rifle when changing between suppressed and unsuppressed use. In addition to the lack of back-pressure, NG2 has engineered a suppressor with no discernible first round pop and excellent reduction in heat buildup. Should the user wish to clean the can after extremely heavy use, or use with cast lead projectiles, the MAXFLO 3D is one of the very user-serviceable center-fire rifle silencers on the market. http://www.capitolarmory.com/ng2-defense-maxflo3d-556-rifle-silencer.htmlContact UsPhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.com
MWS Maxim 9 Spring Kit Install Capitol Armory 2018-02-16 | For those who like a lighter trigger pull, Modern Weapon Systems have made a trigger kit for the Maxim 9 pistol. It features a trigger safety spring, as well as two different striker springs to achieve the desired trigger pullIn this video, we demonstrate how to install the springs in the Maxim 9. http://www.capitolarmory.com/mws-modern-weapon-systems-maxim-9-spring-kit.htmlContact UsPhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.com
SilencerCo Chimera Overview Capitol Armory 2018-02-01 | Quick OverviewSILENCERCO'S LATEST RELEASEWith no barrel restrictions, the SilencerCo Chimera is arguably the best choice for a short barreled rifle. Full-auto rated and compatible with .22 Hornet to .300 Winchester Magnum, the SilencerCo Chimera is usable on a variety of hosts. Compatible with Saker ASR mounts, ASR muzzle devices, and Saker front caps — the versatility you've come to expect from SilencerCo. CAPITOL ARMORY'S OPINIONIf you're thinking the Omega 300 is not tough enough for your requirements (trust us it is: video), meet the Chimera 300. The Chimera 300 uses the proven baffle geometry of the Omega 300 (known for how quiet it is for its size) and toughens it to create a heavy duty suppressor using more durable alloys and other structural improvements. The Chimera 300 is meant to be tough and industrial and comes with an improved Stellite blast baffle and a series of Inconel 718 baffles. Just like the Saker series and unlike many competitors, the Chimera 300 is fully welded. Given its more durable construction, the Chimera is full-rated without any barrel length restriction. Out of the box, the Chimera 300 is shorter than an Omega and sounds just as good. In comparison to other manufacturer's suppressors of a similar size, the Chimera comes out ahead by a few decibels. Further, the Chimera 300 uses the Industry's most popular mount, the ASR system to ensure a positive lockup on your firearm.FEATURES:No barrel restrictionsFull-auto ratedStellite blast baffle for durabilityCompatible with Saker mounts, end caps and ASR muzzle devicesComes with your choice of Saker mount and muzzle device125dB-136dB sound reductionCOMPATIBLE ACCESSORIES:ASR Mount, Trifecta Mount, YHM Mount, 51t Mount, Direct Thread, Dead Air Key-moFlat end caps, Flash hider end cap, Standoff end capASR flash hider, ASR muzzle brakePhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.com
SilencerCo Chimera First Look Capitol Armory 2018-01-19 | Quick OverviewSILENCERCO'S LATEST RELEASEWith no barrel restrictions, the SilencerCo Chimera is arguably the best choice for a short barreled rifle. Full-auto rated and compatible with .22 Hornet to .300 Winchester Magnum, the SilencerCo Chimera is usable on a variety of hosts. Compatible with Saker ASR mounts, ASR muzzle devices, and Saker front caps — the versatility you've come to expect from SilencerCo. CAPITOL ARMORY'S OPINIONIf you're thinking the Omega 300 is not tough enough for your requirements (trust us it is: video), meet the Chimera 300. The Chimera 300 uses the proven baffle geometry of the Omega 300 (known for how quiet it is for its size) and toughens it to create a heavy duty suppressor using more durable alloys and other structural improvements. The Chimera 300 is meant to be tough and industrial and comes with an improved Stellite blast baffle and a series of Inconel 718 baffles. Just like the Saker series and unlike many competitors, the Chimera 300 is fully welded. Given its more durable construction, the Chimera is full-rated without any barrel length restriction. Out of the box, the Chimera 300 is shorter than an Omega and sounds just as good. In comparison to other manufacturer's suppressors of a similar size, the Chimera comes out ahead by a few decibels. Further, the Chimera 300 uses the Industry's most popular mount, the ASR system to ensure a positive lockup on your firearm.FEATURES:No barrel restrictionsFull-auto ratedStellite blast baffle for durabilityCompatible with Saker mounts, end caps and ASR muzzle devicesComes with your choice of Saker mount and muzzle device125dB-136dB sound reductionCOMPATIBLE ACCESSORIES:ASR Mount, Trifecta Mount, YHM Mount, 51t Mount, Direct Thread, Dead Air Key-moFlat end caps, Flash hider end cap, Standoff end capASR flash hider, ASR muzzle brakeContact UsPhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.com
Dead Air Wolf 9SD Overview Capitol Armory 2017-11-28 | Quick OverviewThe Dead Air Wolf 9SD is a stainless steel, full weld, modular suppressor that is super compact in its short form and stunningly quiet in its longer form. This is the perfect offering for your pitol caliber carbine or sub gun setup.FEATURESLength: 4.1" - 7.58"Weight: 7.5 oz - 14.7 ozDiameter: 1.6"Uses the same pistons and fixed barrel mounts as the Dead Air Ghosthttp://www.capitolarmory.com/dead-air-wolf-9sd-modular-subgun-suppressor.htmlhttp://www.capitolarmory.comContact UsPhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.com
Dead Air Sandman K Overview Capitol Armory 2017-10-01 | The Dead Air Armament Sandman K is the shortest and lightest of the Sandman family of suppressors. With an overall length of 5.4" and weight of 12.8 ounces , the Sandman-K adds only 2.9" to the overall length of the host rifle.With a full stellite baffle stack and stainless tube, the Sandman K insures extreme durability on both full auto use and extremely short barrels. The Sandman K utilizes the standard Dead Air Key Mount system, insuring compatibility with the same muzzle devices used for the Sandman L, Sandman S, and many SilencerCo suppressors using the Dead Air Key-Mo system.As with other Dead Air suppressors, the Sandman K has no minimum barrel length restrictions and a lifetime warranty. The Dead Air Sandman K is a great choice for suppression when the smallest footprint is needed.http://www.capitolarmory.com/dead-air-armament-sandman-k-762-silencer.htmlwww.capitolarmory.com
Torchwear Hot Bag Overview Capitol Armory 2017-08-10 | http://www.capitolarmory.com/torch-wear-hot-bag-suppressor-cover.htmlThe TorchWear Hot Bag is designed for the transportation and protection of extremely hot suppressors directly after shooting. Designed from Carbonx, the TorchWear Hot Bag handles much higher temperatures than traditional materials like Nomex, and can safely be used to protect equipment and personnel from immediate post-shooting temperatures.Unlike a traditional heat-resistant suppressor cover, the Hot Bag encapsulates the entirety of the silencer offering stronger protection to surrounding materials during transportation.Contact UsPhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.com
SilencerCo Maxim 9 Overview Capitol Armory 2017-05-17 | The world’s first integrally suppressed 9mm pistol. Never before has a company successfully managed to produce a handgun with an integral silencer that is holster-able and hearing safe with any factory ammunition. The Maxim 9 was built from the ground up to create a hearing safe handgun with all types of 9mm ammunition. The Maxim 9 uses standard Glock magazines, is holster-able, has rail attachments for accessories and RMR cut outs. The Maxim is shipped in its full-length configuration and can be shortened by more than 1" and still retain its hearing safe capabilities with subsonic ammunition.For the price of a modest handgun and suppressor, you can now purchase an integrally suppressed handgun without the added length and weight of a traditional pistol suppressor.http://www.capitolarmory.com/silencerco-maxim-9-suppressed-9mm-pistol.html
SilencerCo Omega 45K Overview Capitol Armory 2017-05-10 | The SilencerCo Omega™ 45K is an exceptionally versatile suppressor and is the smallest, lightest, and quietest silencer in its class. Full auto rated and usable with pistols, rifles, and submachine guns, the Omega 45K offers the same extreme durability in an ultra compact package that you’ve come to expect from its smaller sibling, the SilencerCo Omega 9K, and is compatible with 9mm, .40 S&W, .357 SIG, 10mm, .45 ACP, .357 Magnum, .38 Special, .45 LC and both subsonic and supersonic .300 BLK. FEATURES:Weight: 8.8 ozLength: 6.36"Diameter: 1.48"Caliber: 9mm, 40S&W, 45ACP, 300BLK The Omega 45K comes with a 5/8X24 fixed barrel mount and is compatible with existing SilencerCo Octane pistons, fixed barrel, and 3-lug mounts.Contact UsPhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.comThe Mac 10 shown is outfitted with numerous fantastic, must-have upgrades from Lage Manfacturing. For further information on the products from Lage, please visit http://www.max-11.com
SilencerCo Saker ASR First Look Capitol Armory 2017-03-02 | The SilencerCo Saker ASR 762 sets the industry standard for ease of use, modularity and durability. The Saker ASR was designed for bolt action, semi-auto and full-auto firearms. In addition, to its performance, the Saker ASR's design allows for maximum user adaptability and convenience. The Saker ASR includes an ASR fast attach mount and is compatible with other Saker MAAD mounts including: SilencerCo Trifecta, AAC 51t, YHM Y-Mount and direct thread mount options. Contact UsPhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.com
Liberty H.A.T.E. Ring Capitol Armory 2017-02-27 | The H.A.T.E. (Highly Adaptive Taper Engagement) Ring is designed to couple the already highly versatile Liberty Mystic X or Cosmic suppressors to rifles with suppressor mounts via the Silencerco MAAD mount (which can attach to many different manufacturers muzzle devices. Trifecta, ASR, and the 51T). Made from stainless steel and coated in a Nitride finish, this will open up a whole new set of options for the Mystic X user. This device is backwards compatible with the Mystic and Infiniti silencers as well.Contact UsPhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.com
Rugged Obsidian Overview Capitol Armory 2016-12-30 | The Rugged Obsidian 45 is a modular pistol suppressor that can be configured between different lengths with ease. For users who seek maximum performance, the Obsidian 45 is 8.6" long and weighs 12.8 ounces in the full size configuration. It can be quickly shortened down to just 6.7" long and 10.7 ounces if a more compact suppressor is desired. The Obsidian comes with a booster assembly for use on browning type actions and your choice of piston. The Obsidian booster system is compatible with SilencerCo Osprey / Octane pistons. Fixed barrel and flush 3-lug mounts will be available for purchase soon.Full auto rated for up to 45ACP, and also rated for 300 Blackout (subsonic only), the user serviceable suppressor reduces gas blowback through a unique non-slotted piston system.Contact UsPhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.com
Dead Air Key-Mo Capitol Armory 2016-12-20 | The Dead Air KEY-MO mount will allow users of the SilencerCo Saker, Omega, Hybrid, and Harvester Big Bore to attach their existing suppressors to Dead Air Key Mount muzzle brakes and flash hiders. Why install a Dead Air KEY-MO on your SilencerCo product? The Dead Air KEY-MO allows you to utilize a simpler, more reliable mount which offers a one hand on, one hand off mounting solution. The Key-Mo replaces the SilencerCo ASR QD mount; which requires two hand movements to secure the suppressor to the host firearm. Ever want to run your ASR equipped suppressor under the hand rail? Now you can with the Dead Air KEY-MO. The KEY-MO requires a Dead Air Key Mount muzzle brake or flash hider to secure your SilencerCo Saker, Omega, Hybrid or Harvester Big Bore to each host firearm.Contact UsPhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.com
Dead Air Wolverine PBS-1 Torture Test Capitol Armory 2016-12-19 | In this video we ran the Dead Air Wolverine PBS-1 on a PWS MK116 DI upper and full auto lower. Without rest, 600 rounds of XM193 were fired.There were no problems at all with the suppressor, however during the first few rounds the weapon itself was failing to feed reliably and that is not shown in the video.Contact UsPhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.com
Dead Air Wolverine PBS-1 Overview Capitol Armory 2016-12-16 | PEOPLE SAID IT COULDN'T BE DONEYou want to build a dedicated AK suppressor?“You can’t do that.”“They’re too loud.”“What about non-concentric threads?”“How will it mount consistently?”“There’s too many variations.” And yet, here it is. AK and combloc gun lovers rejoice.SO WHAT WILL THE COMBLOC FIT?Keep in mind Dead Air is in the prototyping phase, so things can change. BUT, currently they are planning on: 14L, 14R, 24R, 26L, 15mm, 16mm, 1/2×28, 5/8×24, and 9/16L; possibly more will be added to the list depending on demand. You won’t have to buy multiple silencers to fit different threaded combloc rifles. We plan on offering user changeable thread inserts. More details to come. The Wolverine PBS-1 It’s real, and it’s an AK lovers dream. Testing on numerous platforms have proved successful. Each Wolverine comes with one thread adapter in M14x1LHContact UsPhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.com
SilencerCo Hybrid - Part 2 - Mounting and Accessories Capitol Armory 2016-09-09 | This video covers the SilencerCo Hybrid's parts, accessories, and mounting options.www.capitolarmory.comContact UsPhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.com
SilencerCo Hybrid - Part 1 - Overview Capitol Armory 2016-08-31 | Introducing the SilencerCo Hybrid™ - the silencer for any platform. The Hybrid is compatible with pistol calibers from 9mm to .45 ACP, rifle calibers from 5.56mm to .45-70 GOV and .458 SOCOM, and many in between, the Hybrid is both full auto and magnum-rated and can be used on pistols, rifles, and submachine guns. Boasting low-120s dB on .300 BLK and remaining hearing safe with .45–70 GOV, the Hybrid offers an unparalleled pairing of versatility and performance - a combination you’ve come to expect from SilencerCo products. The Hybrid is rated down to 16" barrels for .45–70 GOV and .458 SOCOM and down to 18" barrels for all magnum calibers up to .338 Lapua Magnum. With a slew of compatible accessories available, you can turn the Hybrid into the perfect silencer for almost any host.Available now at Capitol Armory.http://www.capitolarmory.com/silencerco-hybrid-multicaliber-suppressor.htmlwww.capitolarmory.comContact UsPhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.com
SilencerCo Omega 9K Review Capitol Armory 2016-05-04 | The Omega™ 9K, like the full-size Omega from which it draws its name, is an exceptionally versatile suppressor and is the smallest, lightest, and quietest silencer of its kind in the world at just under 5". Full auto rated and usable with pistols, .300 BLK rifles, and submachine guns, the Omega 9K offers extreme durability in an ultra-compact package. The Omega 9K is the best performing 9mm suppressor under 5 inches. With the fully-welded, tubeless, minimalist Omega 9K, big sound suppression now comes in a tiny footprint.info@capitolarmory.comwww.capitolarmory.com
SilencerCo Omega Full Auto Torture Test Capitol Armory 2016-03-31 | In total we sent 18 30 round magazines of 5.56 through the SilencerCo Omega. When the video starts we had already gone through a couple of magazines; however, our buffer was too light needed a bit of tuning. A heavier buffer was installed, and the firing schedule was resumed.After multiple mags we had a baffle strike but we kept going with no issue.All in all, the SilencerCo Omega is a beast and definitely is not a lightweight can.
SilencerCo Osprey Micro Overview Capitol Armory 2016-02-25 | SilencerCo's Osprey Micro can be configured as the shortest 22LR suppressor on the market. In this video we discuss the suppressor, mounting, decibel reduction, and other helpful tips on the Osprey Micro.SilencerCo Osprey Microhttp://www.capitolarmory.com/silencerco-osprey-micro-22lr-suppressor.htmlContact UsPhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.com
Quick Clips: Threaded Barrels For Your Handgun Capitol Armory 2016-02-19 | In this Quick Clips we cover what it takes to shoot your handgun suppressed. You are going to need a threaded pistol barrel. Below are some of the different aftermarket barrel makers:Strom Lake BarrelsLone Wolf DistributorsSilencerCoAmerican TacticalSig SauerH&KAACHere are some of the most common thread pitches for handguns:9mm: 1/2x28 M13.5x1LH40 S&W:9/16x24M14.5x1LH45 ACP:.578x28M16x1LH
Quick Clips: SilencerCo ASR Platform Capitol Armory 2016-02-17 | In this Quick Clips we cover SilencerCo's ASR Platform.ASR is short for Active Spring Retention. It comes integral to the Specwar series & as modular attachments to the rest of the line up.Available ASR Silencers:Specwar 762Specwar 556Specwar K556Saker 556 Saker K556Saker 762OmegaHybridHarvester Big Bore Specwar - ASR is Integral to canSakers - use the MAAD ASR MountHybrid, Omega, & HBB - Have their own ASR MountFor more information on the SilencerCo ASR platform or anything else we sell, please contact us at:www.capitolarmory.cominfo@capitolarmory.com512-879-1068or stop on by:Capitol Armory2000 Windy Terrace 1ACedar Park, TX 78613
Quick Clips: SilencerCo Omega Accessories Capitol Armory 2016-02-16 | In this Quick Clips we go over accessory options for the SilencerCo Omega.The Omega can be mounted via Direct Thread Modules or the ASR system.The Omega can also accept Flat end caps in both 556 & 762 bore sizes.The Omega ships with:1 ASR Mount1 ASR Muzzle Device in either 556 or 7621 Direct Thread Mount1 Anchor Brake1 Omega ToolsFor more information on the SilencerCo Omega or anything else we sell, please contact us at:www.capitolarmory.cominfo@capitolarmory.com512-879-1068or stop on by:Capitol Armory2000 Windy Terrace 1ACedar Park, TX 78613
Flash Hider VS Muzzle Brake Capitol Armory 2015-12-18 | "What's the difference between a flash hider and muzzle brake?" It's a question we get asked quite frequently, so in this video we discuss the differences between the two.Contact UsPhone: 512-879-1068Fax: 512-605-3720Email: info@capitolarmory.comwww.capitolarmory.com
SilencerCo + Noveske + Capitol Armory Capitol Armory 2015-10-29 | This Summit collaboration between SilencerCo® and Noveske Rifleworks® features a Noveske Gen III rifle chambered in 300 Blackout with an 8" barrel, paired with a color-matched Summit-edition direct thread SilencerCo Omega. The combination of included accessories and SilencerCo + Noveske engraving on the Omega and rifle make this package truly one-of-a-kind.Available exclusively at Capitol Armory.The package features:Noveske Gen III 8” 300 BLK RifleSilencerCo Omega - Color-Matched to RifleOmega Specifications: 7.62 Flat Front Cap & ⅝ x 24 Direct Thread MountAXTS™ Raptor Charging HandleSD-3G Geissele™ TriggerMagpul MOE™ SL StockMagpul MOE™ K2 GripMagpul MBUS™ Pro SightsPelican Hard Case w/ pre-cut foamNoveske “Johnny Edition” Magpul PMAG™ 30Matching Noveske + SilencerCo Engravinghttp://www.capitolarmory.com/noveske-rifleworks-short-barreled-300-and-silencerco-omega.html
