Symmetrical versus Asymmetrical Bipolar Tesla coil power measurement. Part 1 TheOldScientist 2026-09-23 | Symmetrical versus Asymmetrical Bipolar Tesla coil power measurement. Part 1
High Voltage Propagation in a vacuum TheOldScientist 2022-10-31 | vorticesdynamics.comThis video is a continuation of the last video which was related to the Avramenko plug. I add now four fluorescent bulbs in parallel to a vacuum tube in series and investigate the sparking behaviour.
The Avramenko plug and one wire power transmission TheOldScientist 2022-09-05 | vorticesdynamics.comThis project is a very good start to get into radiant energy projects. It is about electrostatic charge. We can with very little energy trigger a flash of a large 18 Watts 60 cm long fluorescent tube.
Half-Bridge with Bootstrap technologies challenges TheOldScientist 2022-08-30 | Website: vorticesdynamics.comIn this video I cover some of the crucial configuration scenarios to provide a running Half-Bridge driver. I demonstrate the problem you face when deriving from your calculated values for the bootstrap capacitor. This is of course one factor which plays a role but there are many more details to consider. More on my website to discover.
Can a ZVS Half-Bridge consume less power than a Class C amplifier TheOldScientist 2022-08-28 | Website: vorticesdynamics.comIn this video I answer the question if a Half-Bridge is more efficient than a Class C amplifier. We compare one Class C amplifier with two Class C amplifier working in Zero Voltage switching mode
Arthur Mathews Teslas Last Assistant TheOldScientist 2022-07-21 | Cleaned up audio. Script is on my website
How to protect your Switches, Drivers and Amplifiers from getting destroyed by the Back EMF TheOldScientist 2022-07-19 | In this video I demonstrate ways to protect amplifier technologies where stored energy of a coil as Back EMF is produced. Circuit board PCB is available for members on my website.Website: vorticesdynamics.com
Development update first quarter 2021 TheOldScientist 2021-04-13 | Website: vorticesdynamics.comI provide a brief update of what I have produced so far this Year. Every week and sometimes twice per week are new content posted on my website. for an overview check the post on my website
What is a scalar wave and a scalar network. Thesis for energy gain in a scalar network. TheOldScientist 2021-01-08 | Website: vorticesdynamics.comIn this short video I like to give guidance what a scalar wave and a scalar network is. The following slides will depict the way I understand why we have the measured energy gain. No Zero Point Energy or anything unexplained but simple the capture of Quasiparticles or neutrinos
Development update January 2021. Prove of concept for a self-sustaining scalar wave energy system TheOldScientist 2021-01-05 | Website: vorticesdynamics.comI have produced many videos for my members based on scalar wave and made discovery which I like to share. In my video for my members I posted video yesterday where I saw non linear increase in COP over voltage. This was however based on sine waves. What I demonstrate to day is the real thing with measurement of power requirement of the Driver TC4421A, The losses will be very obvious. However we still have positive balance on the receiver.
Impedance matching of a coil. Optimising the power delivery to the load TheOldScientist 2020-12-17 | Website: vorticesdynamics.comIn this video I like to to get into the subject of the need of impedance matching. The purpose is to give guidance and a way to trust measurement results.Link from the online calculatorsohmslawcalculator.com/ohms-law-calculatorhttp://www.learningaboutelectronics.com/Articles/Inductor-impedance-calculator.php#answeromnicalculator.com/other/impedance-matching
Scalar wave, gods spark and the voice of the angels TheOldScientist 2020-12-11 | Website: vorticesdynamics.comDevelopment update of December 2020. I provide a never seen glimpse in the possibility of scalar waves In this video I demonstrate ways to optimise the power delivery to a remote site. Conventional ways would use a bnc two wire cable with termination to keep the impedance to 50 or 75 Ohm. Here the frequency would not change and the power delivery is reduced to 50%. In this way we need only one wire have a higher frequency and a higher efficiency.
Development update 11/2020, Neutrino Energy and Scalar wave energy transmission TheOldScientist 2020-11-24 | Website: vorticesdynamics.comDevelopment I have done for my members in November 2020. I talk about the Neutrino energy and revisit the Scalar Energy projectLinks of listed sources in my videohttps://www.meyl.eu/go/indexb830.htmlen.wikipedia.org/wiki/KATRINhttps://www.katrin.kit.edu/68.phpneutrino-energy.comneutrino-energy.com/scientific-advisory-boardneutrino-energy.com/newsrooms
Calculation, simulation, experimentation. From Class A to Class E amplifier TheOldScientist 2020-10-19 | Website: vorticesdynamics.comOnline frequency calculator: http://www.1728.org/resfreq.htmLTspice: analog.com/en/design-center/design-tools-and-calculators/ltspice-simulator.htmlTo close the knowledge gap and helping you to get a build with confidence and minimum expenses I introduce the industrial standard for electronic applications. I will run you through a difficult example and demonstrate how you can achieve results which will be confirmed at each stage. This is the only way to move forward building technologies. members will receive all files and can run the simulation themselves and tweak circuits based on their requirements.
H - Bridge Driver news update and trouble shooting guide for a working H - Bridge Driver TheOldScientist 2020-10-13 | Website: vorticesdynamics.comI like to provide you an update of my latest tests I conducted for my members. I tested IR 2110, NCP 5181, IRS 2453D and many more. A troubleshooting guide is included in this video from the IR 2110 series.
New performance evaluation series in production. H - Bridge driver ICs. EG. IR 2110 or NCP 5181 TheOldScientist 2020-09-28 | Website: vorticesdynamics.comIn these test I will provide guidance how to get them in any configuration working with your Tesla coil or other high voltage project. The first problem your input is solved for you by providing a logic signal source for high and low side from any signal source. All those IC's are tested with normally used technologies like 50 Ohm signal current source, transistors, mosfet driver with and without mosfet amplifier stage.
News, updates of the Electroculture project and the new Website design and function. TheOldScientist 2020-09-11 | Website: vorticesdynamics.comThe news contain results of the project I started in March and April this year. And second the new website design with simplified subscription levels and the possibility for non members to view any content as pay per view, as well as joining my electroculture team for the next season.
Follow up procedure of the project resonance in biological entities TheOldScientist 2020-03-19 | Website: vorticesdynamics.comIn this Follow up overview I will provide the process details to follow in order to work with me on the project.
Interactive content delivery forum or how I get fringe technologies on the market TheOldScientist 2020-03-02 | In this presentation I like to provide you with an overview how I like to interact and work with you int he future. I work on technologies I like to share and bring to use for everybody.
How to find the resonance frequency and the wave characteristic associated to it TheOldScientist 2020-02-17 | In this short life event I will perform a basic test to look for resonance in an air coil and how we know it is the fundamental frequency. A further demonstration is how to achieve that efficient which will provide us a with a rule of thumb for any coil system. At the end of the presentation I will answer in a Q&A fashion questions you might have and can do some adjustments to testings for you
Power delivery and distribution between air coils TheOldScientist 2020-01-20 | Website: vorticesdynamics.com This video is produced with real-time functionality for web-streaming.
Live presentation announcement for future video postings TheOldScientist 2019-12-05 | Website: vorticesdynamics.comI like to announce that my future videos will be conducted live in front of you. I like to revisit some of my old experiments and shed some more light on it. All experimentation will be done in a constructive fashion, meaning no demonstration of any turnkey system or replication of any "Free Energy devices". The presentation will be done with multi camera support and therefore adds a lot of complexity to the subject but believe it also makes it more enjoyable to watch and to interact with me and my presentation.
Geometric Objects and sympathetic wave distribution TheOldScientist 2019-08-27 | Website: vorticesdynamics.comIn this video I will continue on my quest to condition the environment. Geometric forms do that already in a very subtle way. I like to spread the sympathetic message around a larger area and will investigate its effects. The coil construction follows geometric rules as well does the wave propagation.
Harnessing Atmospheric electricity, and lift-off setup YT1 TheOldScientist 2019-08-18 | Website: vorticesdynamics.comThis is a short announcement of the continuation of the subject: Harnessing atmospheric Electricity. I will test and evaluate the performance of harvesting electrical potential to a height which has not been tested before.
Geometric objects, polarity and spin direction TheOldScientist 2019-08-15 | Website: vorticesdynamics.comThis lecture is part of Walter and Lao Russell's Universal law, Natural Science and philosophy study. It gives some guidance for the coil design to consider to recreate the law of nature.The study is available on my website:Website: vorticesdynamics.com/research/books Available to Basic members
Geometric objects and the influence on EMF TheOldScientist 2019-06-04 | Website: vorticesdynamics.comAs continuation on my geometric objects series as mentioned I move over to the EMF testing. I have therefore in use a professional handheld spectrum analyser which allows me to do compliance testing and reporting of frequencies from 0.5 Hz to 20 MHz. In addition it is also able to measure the static magnetic fields in 3d.For the first time I will apply the geometric objects in the form of the flower of life. Here we have to apply the natures law where we orientate the pyramids from heat to cold and visa versa.
Geometric objects and the influence on water TheOldScientist 2019-05-14 | Website: vorticesdynamics.comI like to show one of my current experiments I conducted for my members. I noticed that this effect has never anywhere reported and like to point out the importance of the discovery. This result is replicable and shows clear sign of logic by selecting structures and forms. You find all drawings and print out files for producing these pyramids in my research area.
Geometric objects and the influence of deposits in a glass jar TheOldScientist 2019-05-08 | Website: vorticesdynamics.comJust a short update of my latest tests where I use a second glass jar for my Alchemy projects. I was at first sceptical that what I see is just a irregularity of the manufactured glass jar which promotes the deposits of matter on the inside wall. Previous test seem to confirm it but with my latest project of 14 day rinsing of Ormus I see exactly the same. Both jars are stored in a wooden box which is EMF shielded on the outside during the settle period before rinsing.
Geometric Objects and the influence on Ormus TheOldScientist 2019-04-18 | Website: vorticesdynamics.comI like to show some quick test results of the influence on Ormus by Geometric Objects I was working on. More details can be seen in the latest video production of Geometric Objects and the influence on the Aether on my website..
Geometric objects and the flow of life part 2, Test Start TheOldScientist 2019-04-07 | Website: vorticesdynamics.comI have completed my first test scenario of geometric forms and will conduct now the first two tests. The first test will be done with high concentrated solution of refined table salt on a sample carrier for a microscope. The second test will be the measurement of the ph value of demineralised water over time.The pyramid I use can be downloaded from my website available to Basic and Full members.
Geometric objects and the flow of life TheOldScientist 2019-03-18 | Website: vorticesdynamics.comGeometric objects out of special materials and the influence on the flow of life.In my many Years of research, I came over and over across the subject of the preference of nature how life force propagates, and nature works. We learned that asynchronous arrangements are more efficient and everything living in Nature follows the Golden mean rule in the Fibonacci series. Something is responsible for this preference, a medium about which I produced already a video. Some might call it the Aether. There have been many attempts to repeat Michelson–Morley experiment to prove the existence of the aether. But all of them did not get the results which were expected.There is however a different experiment which did successful prove that there is a drag which changes the speed of light and is creating an interference pattern as expected. This result does demolish special relativity from Einstein because he states that regardless of speed in any direction the speed of light is always constant. Academics are not aware of this experiment and still believe there is no medium which is the only thing which can explain all the strange things we did measure like the travelling of light over fast distances in a vacuum, dark matter, quantum entanglement, precognition, déjà vu, remote viewing and many more. I am talking about The Sagnac effect. Worth as contender to consider.A video link is here: youtube.com/watch?v=SWmlimH7laY&feature=youtu.been.wikipedia.org/wiki/Sagnac_effectComing back to the new experiment I like to conduct. Objects in special geometric form and arrangement seem to influence the aether flow and therefore the life power. This has been proven not only for pyramid constructions but also for a rectangle design where with different layers of material a concentration of the aether is achieved providing the same results as in a pyramid.Example the Orgone AccumulatorWhat has not been done to a create deal is combining objects in various arrangements with different materials and conduct test.The experiment I will conduct are material scientific, chemical, biological, electromagnetic and thermal imaging.Here I will move with my lab equipment into the biological area where I use a microscope to analyse test results and grow biological cultures.My goal is to provide a repeatable result which can be replicated by everyone.I will start with a tutorial for all members how to construct two types of pyramids. 1. The Cheops pyramid and 2. The Russian pyramid design. Materials you need is from a stationery. The tutorial will be placed under Research; Tutorial and the letter P. Join me on my website to follow the exciting experiments.Geometric objects
Preview atmospheric electricity part 3 TheOldScientist 2019-01-18 | Website: vorticesdynamics.comThis is a preview of the part 3 of the series of harnessing atmospheric electricity. Here I will focus on how to convert the high voltage to low voltage and higher current.
Development Forecast 2019 TheOldScientist 2018-12-17 | Website: vorticesdynamics.comI like to give you an overview of my projects I like to conduct in 2019.
Review of testing accurate materials for Atmospheric electricity TheOldScientist 2018-07-04 | Website: vorticesdynamics.comA short overview of scenarios to consider to measure the efficiency of tested materials and structures in an ionized field. Also some background information of test results of my released video on my member website.
Phase 1 Atmospheric energy harvesting TheOldScientist 2018-06-29 | Website: vorticesdynamics.comI like to announce the start of conducting tests for finding the best material and structure to harvest the electrical potential from the air. These videos will be available for Full members on my website.Video here to watch: youtu.be/wYHUZmgYYz4
Harnessing Atmospheric electricity TheOldScientist 2018-06-04 | Website: vorticesdynamics.comIn this presentation, I like to raise awareness about harnessing efforts of electrical potential from the sky as means to compliment solar, wind and geothermal power as natural occurring energies provided by the sunI like to give credit to Ion Power Groupionpowergroup.comAnd Stanley Deyostandeyo.com
Dielectric Field propagation and the influence of water TheOldScientist 2018-05-09 | Website: vorticesdynamics.comIn this video, I announce the production of a more extensive research into dielectric fields. I will measure electrical potential and current on the load. We look into the propagation and influence we can assign for direct propagation of the field. Water is part of our life and has a huge impact on the propagation and absorption of dielectric fields.
Dielectric field propagation, Part2 TheOldScientist 2018-05-06 | Website: vorticesdynamics.comIn this video, I investigate further the option of enhancing dielectric fields. I, therefore, did build a new receiver and getting closer to the factors which influence energy reception. It seems at first obvious how the propagation works but look closer. Radiating in all directions is a waste of energy. I will try to achieve a focused propagation. I also will try to eliminate electromagnetic wave propagation as this is also waste energy. Any conducting surface area is increasing energy reception. However, geometric forms play also a role. There are only two conditions for a dielectric field strong enough for my receiver to pick up necessary. 1. High voltage and second high frequency. However the higher the frequency the more power is required to generate it.
The Standing Wave ratio principle and harnessing of standing waves issues TheOldScientist 2018-04-23 | Website: vorticesdynamics.comThis is one of my educational video explaining standing wave ratios or harmonics in a transmission line. It is related to the wireless energy transmission. I demonstrate here that at a specific frequency all energy is reflected back to the driving primary coil. Here I harness a standing wave but also risk the destruction of my amplifier. The load requires 10-11 Volt. I drive with 5 Volt.
The Caduceus coil performance TheOldScientist 2018-04-13 | Promotion to join as member on my websitevorticesdynamics.co.ukI like to announce the production of a new video in the category of next generation coil design. Here I pick-up on a viewers request to produce a caduceus coil with three knots and multi stranded wire. Looking at my first tests I have to admit a very unusual behavior. The cancellation effect of input current is obvious. However I get power out form voltage with almost no current.
Radiant Energy and Dielectric Fields TheOldScientist 2018-04-05 | Website: vorticesdynamics.comI like to provide an overview of what a dielectric field is and the importance for nature. I therefore will demonstrate the behaviour of a Radiant energy collection device. The device is receiving dielectric energy which is converted into electromagnetic energy to power the LED. The conditions to make it work is described in Tesla's patent of Radiant energy devices.
Coiling Performance evaluation for NG coil design TheOldScientist 2018-03-30 | Website: vorticesdynamics.comAfter my release of the transformer design educational video on my Member website, I like to continue with a performance evaluation of various driving coils. For simplicity, secondary coils are all wound in one direction so the focus is the driving coil. The output is measured across the 5-6 Volt lED load via the bridge rectifier.
Energy harvesting of standing waves versus resonant waves TheOldScientist 2018-03-27 | Website: vorticesdynamics.comI like to announce the production of a video series about the comparison of energy harvesting of standing waves versus resonant waves. A standing wave is considered a mismatch configuration by engineering standards because all power is reflected back to the amplifier and not to the load. However, to avoid standing waves 50 Ohm transmission lines are introduced which are restricting power propagation to a maximum of 50%. This is considered 100% efficient. I will provide some guidance on the subject and demonstrate scenarios how to create standing waves visible on the coil and here in a transverse mode.
The influence of a permanent magnet on an AC driven transformer TheOldScientist 2018-03-21 | Website: vorticesdynamics.comI like to give you some guidance on the influence of permanent magnets on an AC driven transformer. In a nutshell the magnet allows to regulate the flow of current in a transformer.To prove that there is no energy gain is to tune the transformer back to a new resonance frequency with the same current requirement as before. It simple terms it is a loaded spring you push against it. However it is possible to optimize the system to better performance than before. I will go in more details on my membership website.
Dielectric fields from a secondary Tesla coil via capacitive driving TheOldScientist 2018-03-19 | Website: vorticesdynamics.comIn this video I like to demonstrate some of the functions of a class B amplifier. I also like to highlight some side effects of driving a Tesla coil in an environment where electronics are present. In my example I use a sensor switch desk lamp. I also highlight the dependence on load in an dielectric filed in the same way a load is connected to a circuit. Based on Kirchhoff's law every consumer is reducing the potential of the circuit. This is also the case for dielectric fields,.specifically in the near field. This effect is not visible in the far field as seen by broadcasting radio stations.
How to replace a signal Generator for your self sustaining energy device. TheOldScientist 2018-03-18 | Website: vorticesdynamics.comIn order to build a self sustaining energy systems we need to have for the proof of concept an independent source for signal and amplification. The signal will be CMOS and TTL with very low power consumption. Amplification has to be Push Pull class B with Zero no load current draw. All even harmonics will be filtered out and only odd harmonics are produced. The fidelity is very high and used in the past for preamplifier audio stages.
NG Coil system pulsed with no ground reference TheOldScientist 2018-03-02 | Website: vorticesdynamics.comCoils are available for sale contact meI like to provide an update how to excite the NG coil system. We drive a load from rectified AC of the coil. There is no ground reference and only pulsed DC via one wire to the coil. We measure the voltage drop and current requirement of the load.
NG coil system and signal interference pattern TheOldScientist 2018-02-28 | Website: vorticesdynamics.comCoils are available for sale. Contact me.In order to break out of the closed energy system we have to isolate the magnetic flux between coils. We need voltage but do not want current. How can we do that. We also need at least one signal which interfere the current flow from the DC power supply. No direct ground from the power source and signal is connected to the load. DC and AC are mixed in the transistor and fed into two coils in 90 degree angle to each other. The DC power supply output is complitly floating not connected to ground.
Next Generation coil design and non reciprocal behavior TheOldScientist 2018-02-22 | Website: vorticesdynamics.comHere I like to demonstrate another coil design which follows the same path.In order to break about of the dependency to the natural behaviour of electrical energy flow we have to use coil which are not in the same magnetic flux line but in at least 90 degree angle to it. Best is to cancel the magnetic flux all together and be surprised that magnetic flux is generated in the output coil. My example is a Caduceus Coil wound on top of a single wire solenoid with 3 layers.
Solution for illuminating a LED with only one wire and Power measurements of signal and load TheOldScientist 2018-02-16 | Website: vorticesdynamics.comIn this video I resolve my quiz I raised. This is a very important little exercise because it will allow you to avoid reading measurement results in a wrong way. The measurements of power from a signal generator has never been done before or at least google does not know about it. The high and low impedance is related to voltage or current sourcing. Where the voltage from TTL, CMOS is mostly only used for digital signals and for Mosfet drivers. The 50 Ohm signal as the name said is a power output and here we can use any signals we got inclusive arbitrary signals and AM or FM modulation. Interesting is that the TTL has actually far too much power available it requires only voltage and not current to sink. Comparators don't like to get more than a couple of 100 uA and burn easy out.
The NG coil System the Radiant Energy Exiter TheOldScientist 2018-02-14 | Website: vorticesdynamics.comI like to address some question from the last video and like to demonstrate that only potential is required in conjunction with the radiant energy from the field to close a circuit.
