Bisch Basch Bosch | Making A Drill Stand Part 2 - The Base - Profile Extrusion In The Workshop @BischBaschBosch | Uploaded December 2023 | Updated October 2024, 2 hours ago.
I this video, I take you through the making of a base to compliment the drill stand that was made in the previous video (part 1).
The base is, for the most part, typical of aftermarket drill press tables or pillar drill tables that include an adjustable fence and flip stop. Mine really only differs in making a mount for the drill stand on the base.
Still, I hope you find this video useful, helpful or interesting if you're planning on making something like it for yourself.
Some useful links below.
For mitre track / T-slot tracks and sliding bars / nuts - ebay.us/veMTgl
Ooznest for aly profiles and fixings - ooznest.co.uk/#a_aid=629f6705cdd87&a_cid=11111111
For Banggood Linear rails - uk.banggood.com/custlink/GmGF4HwYci
instagram.com/bischbasch
I this video, I take you through the making of a base to compliment the drill stand that was made in the previous video (part 1).
The base is, for the most part, typical of aftermarket drill press tables or pillar drill tables that include an adjustable fence and flip stop. Mine really only differs in making a mount for the drill stand on the base.
Still, I hope you find this video useful, helpful or interesting if you're planning on making something like it for yourself.
Some useful links below.
For mitre track / T-slot tracks and sliding bars / nuts - ebay.us/veMTgl
Ooznest for aly profiles and fixings - ooznest.co.uk/#a_aid=629f6705cdd87&a_cid=11111111
For Banggood Linear rails - uk.banggood.com/custlink/GmGF4HwYci
instagram.com/bischbasch
![[Gifted] Outside Radius Router cutter. Brilliant AND Terrible!](https://i.ytimg.com/vi/OOUoIsT-bEg/hqdefault.jpg "[Gifted] Outside Radius Router cutter. Brilliant AND Terrible!
This is a router bit that, as soon as Id seen it, wanted it and was already designing furniture pieces in my head to make from it. All it has to do is its job...
Designed to cut a profile into Conti-board/MFC (melamine faced chip board), melamine mdf, plywood and solid woods, when folded 90 degrees, it creates a seamless outside radius.
There are though some challenges to overcome for the router bit to be successful. Are these challenges worth the effort? This I explore in the video and I think the answer is clear.
Thanks to Banggod for sending me the cutter to try.
If youd like to look for yourselves, links are below. Check size options before ordering!
The cutter I used 30mm radius - https://uk.banggood.com/custlink/GG39EMreei?title=30 radius bit
Similar cutter type including 50mm radius - https://uk.banggood.com/custlink/3KDiyzr4gL?title=50 radius bit")
