北海道 礼文島 大風大浪 航拍 Bellergy RC 2016-06-13 | 北海道航拍之旅第4天：礼文島是我旅程中最期待的地方，美麗的自然風景，人不多，很適合航拍。但天氣不似預期，大風得連人也站不穩，航拍就更不用提了。這條片是禮文島的東南端所拍的，地名是知床。那裡風還是很大，飛出去不知能不能回來。但太美了，冒險也得一試。正因為天氣不好，拍出來好有氣勢。還是很喜歡禮文島，這裡我一定會再來的！I will be back!北海道之旅旅遊Blog：http://dollergy.net
#shorts Create stable (no flickering) video with Stable diffusion. Bellergy RC 2023-07-21 | How to create it?1. Use a guided video to create keyframes in the stable diffusion;2. Embed the stable diffusion keyframes with the guided video to EbSynth;3. Combine the EbSynth exported videos on DaVinci Resolve with crossfade effect;
Twelve Lakes in Shirakami-sanchi, Aomori, Japan Bellergy RC 2022-09-22 | A stock-video shared to pixabay.com for free download.
explosion-experiments Houdini export to Blender for shading and rendering Bellergy RC 2022-01-27 | The abstract explosions were created on Houdini. It used the pyro solver to create a smoke simulation and then used "Pop Advect by volumes" to convert the smoke volume to particles. Finally, export the particles to Blender for shading and rendering.It is a project to test how to export particles with attributes (e.g. velocity, colors) to Blender.Download the Houdini file here (support Houdini 18-19):drive.google.com/file/d/16zjyqtLKWuxZXEtiA3MpwRiU0i6ciEqi/view?usp=share_link
The owner of video islands-ocean-sunrise-landscape-2119 on pixabay Bellergy RC 2021-05-21 | Some people download my video on pixabay.com/videos/islands-ocean-sunrise-landscape-2119 and received a claim of rights from someone other than me. This source video is proofing I'm the owner of the pixabay video and it should be FREE for everyone under the Pixabay License.pixabay.com/service/license
The strong wind blows her out of the sea... Bellergy RC 2020-10-21 | Flight log: Flying low around the mountain, data link lost, RTL but the strong wind blows her out of the sea... Ready to say goodbye to her.-- 00:00 Takeoff00:47 Flying around the mountain03:02 Data link lost03:11 Strong wind blows her out of the sea04:29 She was blown back by the strong wind--airframe: pxpi v1.1frame type: quadcopterflight controller: PX4 (FMU v4)motors: 360KVpropellers: 16 x 5.4battery: 18650 4S5P (16000mAh)live camera: rpi camera modulevideo camera: insta360 one xcompanion computer: raspberry pi zeroremote control: qgroundcontrol data link through 4G networkflight distance: 7.7km---Open source code:github.com/rc-bellergy/pxpi
Homemade quadcopter 8km flight. Bellergy RC 2020-10-13 | Homemade quadcopter config:- 16" propellers- NCR18650GA 4S5P battery (16,500mAh)- 4G data link by HUAWEI E3370- Pixracer r15- Raspberry Pi Zero with live streaming camera- Insta360 One X (Camera)
Parrot DISCO 28km long range flight journey with DISCO4G mod Bellergy RC 2019-02-18 | 28km, the farthest distance currently. The equipment used is as follows:- Parrot DISCO- DISCO4G softmod (Thanks for active and friendly community uavpal.slack.com)- Panasonic NCR18650B Li-ion 3S2P Battery - HUAWEI E3372 (4G USB)
Disco4G 24km Long Range Flight with 3S2P Li-ion battery Bellergy RC 2019-01-08 | This time, I tried 24km flight. It only used about 50% battery. Next time I can plan for a 40km flight.I change the Disco's BATTERY_PERCENTAGE_TABLE_VOLTAGE in config file. It can provides more accurate li-ion battery usage data now.This time I changed the 4G modem antenna angle, but the result was even worse. I lost connection 3 times on the flight. The reconnection took 1.5 to 2.5 minutes.The Insta360 let me control the camera angle after flight. It is useful when i lost the signal.The Parrot Disco installed:- Disco4G softmod- 3S2P NCR18650B Li-ion battery- HUAWEI E3372h modem- Insta360 One X camera
A little crash, but lost my Mavic 2 Bellergy RC 2018-12-29 | A very common mistake, I lost my Mavic 2 while on vacation.It crashed in the trees. The location was hard to reach. I searched it a hour but no result. I have to leave it because of travel schedule.The video is DJI Go app realtime cache, so the resolution is not high.
Shoot 4K VR aerial video with Parrot Disco and Insta360 One X (long flight 6.7km) Bellergy RC 2018-12-19 | I installed Insta360 One X on the bottom of Parrot Disco. It is the result of 4K VR video.The soft stabilizer of Insta360 One X is awesome. The Parrot Disco swings in the air, but the picture is very stable.At the same time, you can see how hard the Parrot Disco works and it is very interesting.In my other video, you can see how Insta360 is installed into Disco.youtu.be/5pgjx5-cwyYThe Insta360 with battery is weight 115g. I don't feel it has too much impact on Disco.[ 00:00 ] Launch[ 02:42 ] Hong Kong Sailing Training Association (1.7km)[ 04:27 ] Silverstrand (3.0km)[ 06:22 ] Hong Kong University of Science and Technology (4.8km)[ 08:33 ] Fishing Site (6.7km then return home)[ 09:45 ] An eagle was encountered during the flight. Can you find it?[ 10:35 ] Clearwater Bay Equestrian and Education Centre[ 11:30 ] Langing* My video license is "Creative Commons", please feel free to use it in your project.
Parrot Disco installed Insta360 One X and disco4G (6.7km flight) Bellergy RC 2018-12-16 | I can't believe that Parrot Disco can shoot video so freely. When I did this test, the effect was better than expected. Awesome!"Shooting"I installed Insta360 One X on the bottom, just like many other multi-copter cameras. Now I can shoot a lot of angles that I could only get in an multi-copter cameras. Because it is a 360 degree panoramic video, I no need to distract the video angle and view during flight. Through post-production, I can find the angles I like in front of my computer. Please pay attention to the screen (10:20), the eagle that rushed to the front was discovered when the post-production. Due to the speed, it is impossible to make a live capture. "Disadvantage"1. Insufficient resolution, this film is HD (1920x1080), we can't render it to 4K;2. When the wind is strong, flying at high speed or climbing, the video will have a jello effect, which cannot be eliminated by post-production (00:33);3. Post-production will take more time;4. 360 video files are larger, and the computer's functional requirements are higher "Landing"Since the camera is below, the Parrot Disco has no landing gear. A flat landing may damage the Insta360. So the place with the long grass is found to be landing, and the result is satisfactory. (12:07)"Softwares for post-production"- Adobe premiere 2018;- GoPro VR plugin;"Long distance flight"Thanks to the author of disco4g providing tools for long-distance flight for free. The video is taken from a single shot, from launch to landing, the longest distance is 6.7 kilometers (08:26). Source code: github.com/uavpal/disco4g"360 video"With the same source file, I'm editing the VR video version, you can compare the source with the editing version, please stay tuned.
FPV Racing Drone Build (timelapse) Bellergy RC 2018-12-12 | It is not a guide of "How to build a FPV drone?", but I want to show you the full process that build from scratch in a timelapse video. If you didn't build your own racing drone, it gives you an overall idea that how it be builded.Test Flight: 07:30
Parrot DISCO + 4G network : 7km Test Flight Bellergy RC 2018-12-11 | Follow the disco4g mod, made a test flight today finally. It is using original battery. The farthest distance about 7.2km, no connection drop. The frame rate is low but still controllable.[ 07:45 ] 7.2km, 50% battery left[ 09:55 ] Chasing two speedboats[ 16:00 ] LandingMore information about disco4g softmod:github.com/uavpal/disco4g#parrot-disco-over-4glte-softmodHow it works?bit.ly/2SGKmcqMy building blog (Chinese, updating):bit.ly/2SKjw3tHardware using:- Huawei E3372h 4G USB modem- 2x SIM cards of CSL- Antennas (2x CRC9) for the modem
Mavic Pro Zoom Slow Motion mode Bellergy RC 2018-09-26 | Shots were taken with Mavic Pro Zoom using 120 fps (slow motion mode).Music: www.bensound.com
Tensorflow posenet testing result Bellergy RC 2018-08-30 | It is a testing result of Tensorflow posenet.Estimate multiple poses in live stream video.Source code: github.com/rc-bellergy/tensorflow.js-posenetDemo page: https://designquest.com.hk/demo/tensorflow-posenet/(Tested in Mac Chrome only, using mobile will be slow)
Face Recognize Testing Bellergy RC 2018-08-30 | Using Python face_recognition to train machine recognize Produce 48 1AM group members. They are 34-An-YuJin, 52-Choi-YeNa, 56-Lee-KaEun, 57-Huh-YoonJin, 74-Takahashi-Juri.The result is not very well. I think Asia faces are not well recognizable because the training dataset is western faces. The source code is here:github.com/rc-bellergy/tensorflow-study/tree/master/projects
霧降ノ滝 Bellergy RC 2016-12-11 | 一大清早便來到這裡 －霧降瀑布，以為會無人，方便航拍。誰知已有幾位本地攝友，裝好長鏡脚架在取景。一心想他們在這裡影，我飛到瀑布那裡，河水不犯井水。誰知我的航拍機在瀑布上空下降時，他們便發出抗議，只好速速飛走了。遊記：http://bit.ly/2hhpO8J
FPV Racing drone Bellergy RC 2016-11-26 | Changed the ESCs to DYS XS30A and using BLHeli Multishot. After PID turning, it became much stable. : )
DALRC XR220 FPV在釣魚翁山頂 Bellergy RC 2016-10-10 | FPV on High Junk Peak Hong KongFrame : DALRC XR220Flight Controller : HGLRC F3 V3ESC : LittleBee 20A, BLHeliMotors : Emax 2205Battery : 4S 1300mAh
DALRC XR220 FPV Practice in 啟德, 龍蝦灣 Bellergy RC 2016-09-18 | Video captured by RunCam 2 (1920x1080 60FPS)Locations: 啟德, 龍蝦灣FPV Practice using :Frame : DALR XR220Motors: Emax motor 2205Props : 5" (3 blade)FC : HGLRC F3 V3FC firmware : Cleanflight v1.13ESC: Littlebee 20AOnboard OSD firmware : MWOSDCCD: Runcam OwlCamera: RunCam 2Battery : 1500mAh 4S
FPV in office Bellergy RC 2016-09-14 | FPV in office with micro brushed quadcopter.FC: SP RACING F3 EVO Brush – running CleanflightMotors: Brushed motors (8.5 x 20mm) 35000 RPM in 3VProps: 60mmCam + VTx: 5.8G mini 25mw with CCD camRx: MicroFrX Receiver (8 Ch PPM Receiver)Weight: 50g (with 500mAh bettery)Flight time: 4.5 minutes
北海道 丸瀬布 山彦の滝 航拍 Bellergy RC 2016-07-12 | 北海道航拍之旅第10天：山彦の滝 28米高的瀑布，隱藏在山林之中。航拍機在林頂往下望，完全看不見瀑布的踪影。在下面，人可以走進瀑布的背面，我稱之為3D的瀑布。瀑布不算很大，但很別緻，經過丸瀬布的話可以一遊。停車場住山上走約五分鐘便到。北海道之旅自駕遊Blog：http://dollergy.net
北海道知床フレペの滝 航拍 Bellergy RC 2016-07-11 | 北海道航拍之旅第9天：由於浪大，原來的行程「知床觀光船」被迫折返。在船上看到一個很有氣勢的斷崖，上岸後就在Google Map上找找有沒有陸路可以去到，原來就是知床八景之「フレペの滝」。廣闊的觀景區內空無一人，腳下是百米斷崖，對望燈塔與藍天，真是一個航拍的絕景哦！北海道航拍之旅第4天：礼文島是我旅程中最期待的地方，美麗的自然風景，人不多，很適合航拍。但天氣不似預期，大風得連人也站不穩，航拍就更不用提了。這條片是禮文島的東南端所拍的，地名是知床。那裡風還是很大，飛出去不知能不能回來。但太美了，冒險也得一試。正因為天氣不好，拍出來好有氣勢。還是很喜歡禮文島，這裡我一定會再來的！I will be back!北海道之旅 自駕遊Blog：http://dollergy.net
北海道 知床 オシンコシンの滝 航拍 Bellergy RC 2016-07-11 | 北海道航拍之旅第9天：オシンコシンの滝是很多香港旅行團都會「到此一遊」的景點。這天一早六點便出發到此，就是為了避免多人。在下面觀看雄偉的瀑布多了，今次有機會航拍一下，旅程又多了一點樂趣。這個瀑布隱藏在樹林之中，飛行時要格外小心，萬一撞上了樹枝就玩完了。http://goo.gl/oqxNL3
航拍 啟德郵輪碼頭與海洋贊禮號 Ovation of the Seas Bellergy RC 2016-06-26 | 航拍啟德郵輪碼頭與海洋贊禮號好奇怪的，郵輪碼頭平台兩邊種了好些植物，使遊人不能接近欄杆。有些想和郵輪影相的人只有踩過植物，而管理公司就多加些警告牌，再加繩保護。為什麼變成這樣？上平台，想看看郵輪是常識的吧。 （哦，注意，此片不是在平台上拍的。）Aerial video of Kai Tak Cruise Terminal with Ovation of the Seas Cruises.
日落維港 航拍 4K Bellergy RC 2016-06-25 | 在短短的30分鐘裡，由金色的日落，到色彩萬變的彩霞，最後以維港夜色落幕。這是香港一個難得的晴朗天空，很高興可以遇到，更有幸地以我有限的技術與器材，把這一瞬間記錄下來。Aerial video of Victoria Harbour of Hong Kong. A beautiful golden sunset with Kai Tak Cruise Terminal.
北海道 利尻島 航拍 Bellergy RC 2016-06-20 | 北海道航拍之旅第5天：沓形岬公園 - 仙法志御崎公園 - オタトマリ沼 - 沼浦展望台 - 姬沼日本自駕遊Blog - 北海道之旅2016http://dollergy.net/%E6%97%A5%E6%9C%AC%E8%87%AA%E9%A7%95%E9%81%8A/2016%E5%8C%97%E6%B5%B7%E9%81%93%E9%81%93%E5%8C%97%E9%81%93%E6%9D%B1%E8%8A%9D%E6%AB%BB%E8%8A%B1%E8%A6%8B%E8%87%AA%E9%A7%95%E9%81%8A/day-5%EF%BC%9A%E8%8B%A5%E9%9A%B1%E8%8B%A5%E7%8F%BE%E5%88%A9%E5%B0%BB%E5%AF%8C%E5%A3%AB
北海道 利尻島 雲丹御殿・晚霞・航拍 Bellergy RC 2016-06-20 | 北海道航拍之旅第5天：（北海道之旅旅遊Blog：http://dollergy.net）這晚在雲丹御殿的夕陽晚宴，餐廳就是野塚展望台的景觀，望着太陽在ペシ岬的襯托下慢慢下沉，而且每秒鐘窗外都會有海鷗飛過，吃的是海膽大餐，這一個晚餐真的值千金。
北海道 稚內・拔海・ノシャップ岬 航拍 Bellergy RC 2016-06-13 | 北海道航拍之旅第3天：這次我們特別繞了路，行稚內西海岸的沿海路，一路上都是濕原的延續，停車的地方是拔海附近。如果天氣好，對岸可以見到利尻富士，不過可惜今天視野很差，利尻富士只可略見形狀，不過沿途景色都不錯。北海道之旅旅遊Blog：http://dollergy.net
北海道 サロベツ湿原 航拍 Bellergy RC 2016-06-11 | 北海道航拍之旅第3天：這次帶drone去旅行的旅程中，唯一一次有人「阻止」的飛行。在飛行完結後，把航拍機拿回車上的不到50米的距離中，有位管理員女仕走出來，很有禮地對我說了一段日文，我估計是不可放航拍機之類的吧。我也有禮地對她說我現在就走了，她還向我說對不起，過程中沒有不快。接下來的飛行我也盡量不在有管理的地方起飛，便沒有發生任何問題了。北海道之旅旅遊Blog：http://dollergy.net
北海道 神居古潭 航拍 Bellergy RC 2016-06-11 | 北海道航拍之旅第2天：神居古潭－北海道石狩川的溪谷上有條吊橋，這是一個賞櫻和賞楓的好地方，過了橋翻過小坡，便可見到廢棄了的舊火車站，外形是按照1901年開業時的樣貌來重建，留下來的鐵軌遺跡還上保存著3輛蒸汽火車呢。北海道之旅旅遊Blog：http://dollergy.net
北海道 優佳良織工芸館－雪の美術館 航拍 Bellergy RC 2016-06-06 | 北海道航拍之旅第2天：在北海道旭川市附近的「北海道傳統美術工藝村」，由「優佳良織工藝館」、「雪之美術館」、「國際染織美術館」所組成。其中雪之美術館最吸引，採用了拜占庭式建築，很有童話世界的感覺。它的螺旋階梯和冰之回廊，身在其中會聯想起「冰雪奇緣」FROZEN。館內的音樂廳感覺很寧靜，可能由於遊人不多的關係。還有一個結婚會場，可以想像在這處進行婚禮會十分華麗。北海道之旅旅遊Blog：http://dollergy.net
北海道滝川菜の花マップ 2016 （油菜花祭）航拍 Bellergy RC 2016-06-05 | 北海道航拍之旅第2天：日本最大的黃色花海 － 北海瀧川油菜花祭 Canola flower in Takikawa駕車進入滝川，便開始看到大大小小的油菜花田散布四處，只是會場的兩幅最大，花也最密。每年五月底至六月初油菜花盛開的日子，主場地每年都不同，要到時再上網查看。北海道之旅旅遊Blog：http://dollergy.net
DJI phantom 3 time lapse video - Sea of clouds Bellergy RC 2016-02-29 | DJI phantom 3 time lapse video, Sea of clouds in Clear Water Bay of Hong Kong.
DJI phantom 3 - Sunrise on sea of clouds Bellergy RC 2016-02-15 | 不知是需還是霧，低至釣魚翁山頂的高度。一起飛已上到雲端，第一次在這個角度看日落。
DJI phantom 3 video HD 60fps Bellergy RC 2016-02-09 | 在龍蝦灣對出約五百米海面，突出了幾塊礁石，當海浪衝擊著它激起的浪花，千變萬化，吸引著我。睇準天晴、大風、潮漲，立即過來再拍一次。
