I rebuilt the inside of a microcontrollerArtful Bytes2026-11-09 | Practical Notes on Embedded (starts with a guide to learning embedded by building): artfulbytes.com ------
I rebuild the inside of a microcontroller from separate chips to show how a CPU talks to the outside world using nothing but memory reads and writes.My microcontroller crashed. I found out why.Artful Bytes2026-07-26 | Practical Notes on Embedded (starts with a guide to learning embedded by building): artfulbytes.com ------
I walk through how to use the clues left inside a crashed microcontroller to trace the failure back to its root cause and fix it.
0:00 Overview 0:34 Debugger 2:08 Registers & memory 2:47 Where are we stuck? (PC) 4:48 Why? (Status registers) 8:27 How did we get here? (Stack) 13:17 Frame buffer problem 16:15 Stack corruption demo 17:24 Dump the error log 18:50 The fix
Code and parts list: github.com/artfulbytes/i_kept_coding_until_an_rtos_was_inevitableWhat Embedded Systems are really aboutArtful Bytes2026-03-08 | Practical Notes on Embedded (starts with a guide to learning embedded by building): artfulbytes.com ------ I put a computer in a book to explain what embedded systems are all about.How Your Code Really Controls HardwareArtful Bytes2025-08-31 | Practical Notes on Embedded (starts with a guide to learning embedded by building): artfulbytes.com ------ I show and explain the mechanism behind how code controls hardware.
0:00 Intro 2:28 Led 4:30 Trimmer 6:48 Receipt printer 8:25 How it works 11:56 Reflection 13:25 LaptopI Shrunk Blinky to 0 BytesArtful Bytes2025-03-16 | Practical Notes on Embedded (starts with a guide to learning embedded by building): artfulbytes.com ------ I take you on a journey from a bloated AI-powered blinky program through C, assembly, and machine code, all the way down to 0 bytes.
0:00 Background 1:17 AI & Cloud 5:34 RTOS 6:17 C 7:04 Assembly 8:42 Code golf 9:36 Machine code 11:15 0 BytesHow a Microcontroller startsArtful Bytes2024-11-03 | Practical Notes on Embedded (starts with a guide to learning embedded by building): artfulbytes.com ------ We explore the startup of a microcontroller using STM32 as an example. First, we look at the manufacturer's assembly code, then we write it from scratch in C.
00:00 Overview 01:25 Create a basic project in STM32CubeIDE 02:14 Review STM32 startup code (assembly) 08:58 Write startup code from scratch (C) 10:22 Discard libc, startfiles and default linker script 14:27 Startup file 16:05 Linker script 18:22 Debug 18:55 C runtime init (CRT0) 23:56 Link with libc (Newlib) 24:42 __libc_init_array (constructors) 26:49 system_init and _start 27:35 Final thoughts
0:00 What it was about 1:10 Writing from scratch 3:16 Fewer motors 4:05 Simpler sensors 4:56 Better microcontroller 6:26 Simpler simulation 6:53 What's next?
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.
#embeddedsystemsSimulation to Real-world Demo | Embedded System Project Series #27Artful Bytes2023-11-26 | I finish up the state machine and demonstrate that it works, first in my simulator, Bots2D, and then on my actual robot, Nsumo. This concludes the project.
0:00 Overview 1:03 Bots2D setup 11:50 Simulation 1 (keyboard control) 12:39 Integrate app code (controller) 15:30 Simulated low-level drivers 25:28 Simulation 2 (Nsumo not moving) 26:50 Input history 31:48 Finish the state machine 38:20 Flash is full! 42:05 Simulation 3 (It works!) 43:30 Real-world demo 45:50 Commit 47:10 Last words
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.
#cprogramming #robot #embeddedsystemsHow to Code a State Machine | Embedded System Project Series #26Artful Bytes2023-10-14 | The application logic of my robot (as many other embedded systems) can be effectively represented as a finite-state machine. In this video, I sketch out the state diagram with PlantUML and prepare the corresponding skeleton code in C.
0:00 Overview 1:56 Draw diagram with PlantUML 12:40 How I will code it 13:30 Three previous commits 16:09 Files 17:25 State machine logic 34:48 State wait 36:35 State search 43:48 State attack 49:15 State retreat 57:29 State manual 59:00 Compile 59:40 Flash is full! 01:01:00 Commit 01:02:05 Last words
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.
#cprogramming #robot #embeddedsystemsI made a Robot 2D Simulator with C++ | Embedded System Project Series #25Artful Bytes2023-07-29 | I explain how I made a 2D simulator for robotics from scratch in C++. I'm going to use this to help me write the application code for my sumo robot.
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.
#simulator #2d #robot #embeddedsystemsHow to Board Bring-up | Embedded System Project Series #24Artful Bytes2023-06-25 | I explain and demonstrate board bring-up by doing a "fake" bring-up of the PCB on my actual robot. To verify the hardware, I run the code I've developed using the development board throughout this video series. While at it, I also fix some issues I discovered in earlier videos.
Board bring-up is an important stage of developing an embedded system. The goal is to verify (asap) that the untested hardware works as intended, because if it doesn't, it has to be fixed, so that new boards can be ordered.
0:00 What is board bring-up 1:45 This video 2:41 Power up the board 4:39 Flash microcontroller 5:07 Board bring-up checklist 6:57 Blink LED 8:15 UART 10:30 Motor driver (TB6612FNG) 13:04 ADC 16:40 I2C 20:55 Bring-up done 21:40 Fix 1: assert UART bug! 22:49 Fix 2: Build issue 24:22 Fix 3: New make rules 29:52 Commit changes 32:00 Ending words
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.
#embeddedsystems #cprogramming #microcontrollerI2C driver in C (with VL53L0X sensor) | Embedded System Project Series #23Artful Bytes2023-06-13 | My sumobot has five range sensors (VL53L0X) to detect the sumobot enemy. In this video, I write an I2C driver to talk to these sensors and verify the traffic with a logic analyzer. I also add an existing driver on top as well as a software layer (enemy) for a nicer application interface.
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.
#embeddedsystems #cprogramming #microcontrollerADC driver with DMA in C | Embedded System Project Series #22Artful Bytes2023-05-24 | My sumobot has four line sensors to detect the white border that surrounds the platform. In this video, I write an ADC driver to sample the values from these sensors. To reduce CPU load, I employ a sequential sampling strategy where the ADC peripheral samples and writes all channel values to memory via DMA before interrupting the CPU. Finally, I add additional software abstractions to turn the raw voltage values into actual line positions.
0:00 Line sensors 1:11 Code overview 2:12 ADC driver 4:40 Assign ADC pins 8:26 My ADC strategy 18:10 Interrupt 19:18 Get values 21:43 Test ADC driver 23:00 Fix bugs 24:10 It works! 25:00 Commit 1 27:25 QRE1113 driver 32:15 Works! 32:45 Commit 2 33:41 Voltage to Line position 37:58 Test with real sensor 40:05 Commit 3
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.Motor Control with PWM in C | Embedded System Project Series #21Artful Bytes2023-04-18 | I write C code to control four brushed DC motors using two motor drivers (TB6612FNG) and a microcontroller (MSP430). Each motor driver requires two control inputs and one pulse-width modulation (PWM) input. I create three abstraction layers: a PWM driver at the bottom, a motor driver in the middle, and a simplified drive interface at the top. 21 videos in and something is finally moving.
0:00 What 2:19 Motor circuit 2:45 PWM driver 26:00 Multimeter/Oscilloscope (DEMO) 27:48 Commit 1 29:15 Motor driver 36:30 Motor spinning (DEMO) 37:30 Commit 2 39:30 Drive interface 50:27 Remote control (DEMO) 51:30 Commit 3 52:00 Assert stop motors 55:42 Assert triggers! (DEMO) 55:56 Commit 4 56:38 Last words
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.NEC Protocol Driver (Infrared remote) | Embedded System Project Series #20Artful Bytes2023-04-05 | I develop a simple driver to decode the signal between an IR remote and my robot. The square-like signal follows the NEC protocol, which I decode by detecting the edges through GPIO interrupts, and measure the time between them using the microcontroller's timer peripheral.
0:00 Intro 1:30 New project 4:00 Driver interface (ir_remote.h) 5:55 Timer peripheral 15:27 GPIO interrupt 16:45 NEC protocol 18:22 My first solution 19:00 A simpler solution 25:00 Ring buffer 27:30 Test it 29:09 Handle "held" button 33:19 Move to main project 34:00 Trace button press 37:10 It works! 38:00 Commit
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.Printf on a Microcontroller | Embedded System Project Series #19Artful Bytes2023-03-14 | I add a printf implementation suitable for microcontrollers so that I can print formatted strings to the terminal. Underneath, it calls the UART driver I implemented in the last video. I further wrap the printf function in a TRACE macro to prefix every trace with filename and line number. Finally, I add trace to my assert function, but only trace the program counter (PC) to save space and show how to get the corresponding file+line with addr2line.
0:00 What and Why 3:28 Add mpaland/printf 6:52 Implement _putchar 9:20 Call printf 11:40 TRACE macro 17:13 Verify TRACE 19:10 Avoid format and cppcheck 22:20 Commit 22:58 Fix mistake 1 23:25 Fix mistake 2 24:00 Add trace to ASSERT 28:30 Program counter assembly 29:53 UART polling in ASSERT 32:20 Fix mistakes 34:05 addr2line 36:25 Commit 37:20 Possible improvements
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.Write a UART driver (Polling and Interrupt) | Embedded System Project Series #18Artful Bytes2023-02-26 | I explain what UART is and show how I use it to print text from my microcontroller to my desktop computer. I first implement a UART driver based on polling and then improve on it by making it interrupt-driven with a ring buffer. This driver will serve as the foundation for when I implement log tracing (printf) in my next video.
0:00 Goal 0:50 Outline 2:30 What is UART? 4:25 RS232 5:43 Why UART? 6:48 USB-to-UART bridge 8:42 Implement polling driver 10:45 Start, data, parity, stop bits 11:50 New project 15:40 Initialize UART peripheral 20:15 Compile 25:46 UART send function 27:35 Print to terminal 30:15 Interrupt + Ring buffer 36:00 Implement ring buffer 40:40 Implement interrupt driver 49:00 Verify interrupt driver 51:40 Move to robot project 53:15 Commit
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.Microcontroller Interrupts | Embedded System Project Series #17Artful Bytes2023-02-18 | I explain how microcontroller interrupts work by mixing theory with a code example. For fun, I let ChatGPT generate my code example. I also add some functions in my project that lets me add new GPIO interrupts more easily. Finally, I bump the clock speed of my microcontroller from 1 MHz to 16 MHz, not because I need to, but because I can.
0:00 Outline 3:12 Why polling is bad 9:40 How does interrupts work? 20:30 Interrupt advantages 21:38 ChatGPT code example 25:56 Interrupt vector table 28:47 Disassembly of ISR 30:36 GPIO interrupts in my project 38:25 PORT1 and PORT2 ISRs 42:30 Test my code 44:25 Fix my code 46:43 Commit 1 47:27 Increase clock speed 53:25 Commit 2
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.How Microcontroller Memory Works | Embedded System Project Series #16Artful Bytes2023-02-04 | Practical Notes on Embedded (starts with a guide to learning embedded by building): artfulbytes.com ------ I explain how microcontroller memory works with a code example. I use my IDE's memory browser to see where different variables end up in memory, and I demonstrate two command line tools to track how much flash memory my code occupies. Overall, knowing how memory works is important because microcontrollers have a limited amount of it, and if we are not mindful of how we write our code, we may run out of it.
0:00 Overview 1:30 Flash and RAM 3:22 From source code to memory 7:12 Code example 8:07 Different variables 12:20 Program code 13:13 Linker script 14:55 Memory browser and Map file 24:22 Surprising flash usage 27:30 Tool 1: Total flash usage 31:38 Tool 2: readelf 33:53 git commit 33:15 Last advice
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.My Small Test Functions | Embedded System Project Series #15Artful Bytes2023-01-22 | During development, I tend to add scratch functions to test a particular part of the code. In this video, I try to handle these functions in a less ugly way.
0:00 Background 1:20 Move the test functions 2:50 Add TEST argument to make 5:15 Fix errors 5:45 Suppress unused functions 7:02 Ugly workaround 7:50 Build all functions in CI 9:53 git commit 11:00 Last words
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.Assert on a Microcontroller | Embedded System Project Series #14Artful Bytes2023-01-16 | I create an assert implementation for my microcontroller. It stops the motors, logs to a terminal, triggers a breakpoint, and blinks an LED.
0:00 Assert 1:00 This video 1:20 My implementation 2:26 Custom assert function 3:53 Software breakpoint 4:55 With TI compiler 6:05 With GCC compiler 7:08 Add breakpoint to assert function 9:05 LED driver 11:27 Two new IO functions 13:47 Test the LED driver 14:35 Test asserts 15:37 Recursive assert problem! 17:09 Busy wait macro 18:05 Commit 1 19:00 Static assert 20:55 Commit 2 21:30 Replace todos (I forgot!) 22:20 Last words
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.Handling multiple Hardware Versions | Embedded System Project Series #13Artful Bytes2023-01-03 | I show how I handle two different hardware targets (robot and development board) sharing the same software. First at compile time and then at runtime.
0:00 Intro 0:42 Overview 1:32 Add argument to make (compile time) 3:50 Some exceptions 4:20 Commit 1 4:52 Detect hardware at runtime 6:18 Modifying my PCB 8:00 Write code to detect pullup 9:00 Test Robot 9:43 Test Launchpad 10:02 Separate folders 10:30 Commit 2 10:47 Fix typos from last video 11:18 Outro
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.How I program GPIOs in C | Embedded System Project Series #12Artful Bytes2022-12-18 | I program the I/O-pins on my robot (and development board) according to the pin assignment in my schematic. Writing to registers is cumbersome, so to make things easier, I implement a code abstraction in C that lets me configure and initialize all pins in a single place.
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.Documentation and Clang format (+2 bugs) | Embedded System Project Series #11Artful Bytes2022-11-22 | I thought I was ready to start writing code, but I had a few more things to discuss first. I talk about the documentation (README.md), coding guidelines, code formatting of the project. I also solve two bugs I ran into while writing code for the coming videos. The first bug was that the Makefile didn't track the header files, and the second one that cppcheck took a long time to execute.
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.Simple CI/CD with GitHub Actions and Docker (Compile+Analysis) | Embedded System Project Series #10Artful Bytes2022-10-09 | I set up a simple continuous integration (CI) / continuous delivery (CD) pipeline using GitHub actions. Its job is to automatically build and analyse my code every time I push a new commit to GitHub. I create a docker image to hold the cross-toolchain (msp430-gcc) that I'm using to build the code for my target. the msp430 microcontroller. With this solution, the toolchain is always available in the GitHub action, and I don't have to worry about it breaking at some later point.
0:00 Overview 2:37 Create a Docker Image 7:54 Create a GitHub Action 9:37 First fail (indentation) 10:00 Branch rule 10:55 Second fail (path) 11:17 Modify Makefile 12:20 Test branch rule 12:39 Pull request 13:13 Third fail (config) 14:20 Success! 14:50 Possible improvement 15:15 Last words
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.Static Analysis for C/C+ with cppcheck (+Makefile) | Embedded System Project Series #9Artful Bytes2022-10-02 | As a programmer, I make mistakes, the compiler catches some, but far from all, and to catch more I use a static analyser. In this video, I demonstrate cppcheck, which is a static analyser for C/C++. I show how to enable and suppress errors, and create a Makefile-rule that lets me run "make cppcheck" from the command-line to check my entire project.
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.How I version control with git (Best Practices) | Embedded System Project Series #8Artful Bytes2022-09-24 | I explain how I'm going to use git in this project series including how I write good commit messages. I initialize the repository and make the first two commits.
0:00 Intro 0:55 Why git? 3:32 Git in this project 4:39 My 3 commit rules 5:36 Write a good commit message 8:08 First commit 11:07 Bonus commit 13:10 Last words
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.The BEST Project Structure for C/C++/MCU | Embedded System Project Series #7Artful Bytes2022-09-03 | In this video, I talk about how I'm going to organize the files of the project and I present the following structure:
Is this the best project structure? Well, take a look at the video for my opinion :)
0:00 What's the best structure? 1:33 Ex 1: The Pitchfork Layout 2:13 Ex 2: Canonical Project Structure 2:45 My project structure 7:35 Naming conventions 7:57 Last words
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.How to Create a Software Architecture | Embedded System Project Series #6Artful Bytes2022-08-13 | I talk about the software architecture of my sumobot and show a block diagram that will keep us oriented in the coming programming videos. I also explain why you should architect your code and some things to consider when you do. Overall, a tiny dip into an otherwise ocean-deep topic.
0:00 Intro 1:08 Disclaimer 1:24 Outline 2:37 Why organize software? 6:04 Sumobot Software Architecture 7:36 Application layer 10:25 Drivers layer 13:25 A few comments 14:13 Why this architecture? 15:05 Books 15:15 Principles & Patterns 15:40 Over-theorizing 16:18 How to think? 17:20 Hardware diagram 19:08 Pattern & Principles I followed 22:21 Remember the Whys 24:04 Last words
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.Microcontroller Programming without IDE (Makefile + Toolchain) | Embedded System Project Series #5Artful Bytes2022-07-20 | There are two common ways to set up a development environment for a microcontroller (embedded) project:
IDE - Use the integrated development environment (IDE) provided by the vendor. CLI - Use the toolchain from the command-line (CLI), build with make (Makefile), and use your code editor of choice.
In the last video, I focused on the first approach and set up an IDE, Code Composer Studio (CCStudio). In this video, I focus on the second approach. I talk about toolchains, the advantages of building from the command-line, and show how to install a GCC-based toolchain and use it to compile the same blink LED project (MSP430) as in the last video. Finally, I create a Makefile from scratch to make building easier.
0:00 Intro 1:00 Video outline 2:18 Why build from command-line? 4:10 Toolchains 06:48 Download GCC-based toolchain 09:15 Build blink project with gcc 15:35 Compiler options 20:30 Add more source files 24:10 Vim editor 25:01 Makefile intro 26:35 Create new Makefile 28:41 Add variables 30:07 More compiler flags 33:31 Separate compilation and linking 35:54 Pattern rule 36:46 Automatic variables 37:52 Put build files in separate directory 40:30 Substitution reference and patsubst 43:01 Phony targets all and clean 44:37 Flash microcontroller using make 47:10 Makefile finished 47:51 What about CMake? 49:01 Recap 49:38 General advice
👨💻 About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.Install an IDE and Blink an LED (Code Composer Studio + MSP430) | Embedded System Project Series #4Artful Bytes2022-07-06 | There are two common ways to set up a development environment for a microcontroller (embedded) project:
IDE - Use the integrated development environment (IDE) provided by the vendor. CLI - Use the toolchain from the command-line (CLI), build with make (Makefile), and use your code editor of choice.
The first is the most straightforward way and is what I demonstrate in this video. I show how to set up Code Composer Studio (CCStudio), the IDE that TI provides for their microcontrollers. I install it on Linux and get the Blink LED example program to run on the evaluation board (MSP430 Launchpad). In the next video, I will demonstrate the second way, which is the one I prefer.
0:00 Intro and Overview 1:08 Why I use the Evaluation board 3:04 Compile code for a Microcontroller 4:00 CCStudio intro 4:20 Install CCStudio 4:50 Why Linux? 6:10 Continue installation 10:28 Blink LED 15:15 Outro
👨💻About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.PCB Design Walkthrough Sumo Robot | Embedded System Project Series #3Artful Bytes2022-06-30 | In the last video, I started going over the hardware of the sumobot by talking about its parts. In this video, I continue by explaining the printed circuit board (PCB) I made to connect them. It's a 2-layer PCB with a microcontroller (MSP430G2553IPW28), two regulators (AMS1117-3.3 and MP2359-5V), two motor drivers (TB6612FNG), and an IR receiver (TSOP382). I designed it in KiCad, an open-source software suite for designing PCBs.
0:00 Intro 0:53 Why PCBs? 1:50 My design 3:13 Schematic 3:48 Power input 4:30 Regulators 6:45 Microcontroller 8:24 Range sensors 9:02 Line sensors 9:45 IR receiver 10:10 Unused pins 10:35 How I program it 11:08 Motor drivers 11:57 Outro
👨💻About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.Picking the Parts for a Small Robot | Embedded System Project Series #2Artful Bytes2022-06-23 | Programming an embedded system is basically about controlling a piece of hardware, and it's essential to understand that hardware to program it. So in this video, I start talking about the hardware (sumobot) I'm going to be programming in the coming videos. I show a hardware block diagram and discuss the parts and why I picked them, including the motors, sensors, battery, and microcontroller. I also explain why I didn't use an Arduino, and why I don't think you should if you want to learn embedded systems development.
👨💻About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.Intro and Overview | Embedded System Project Series #1Artful Bytes2022-06-17 | Practical Notes on Embedded (starts with a guide to learning embedded by building): artfulbytes.com ------ I am introducing a new video series that will focus on programming a sumobot (embedded system) from scratch in the programming language C, including drivers for common peripherals like GPIO, UART, ADC, I2C, Timers, and more. With this series, I aim to show what embedded systems programming might look like in the context of a project, which is different from the typical one-off tutorial because you have to consider more aspects when writing the code.
👨💻About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.A Channel about Embedded SystemsArtful Bytes2022-06-11 | A short video about what this channel will be about, why I started it, and who I am.
0:00 Welcome 0:10 The content I will create 0:38 Embedded Systems 1:00 Why start this channel? 1:32 Who am I? 2:00 The first project
👨💻About me Hi and welcome. I'm Niklas, an embedded systems engineer from Sweden. On this channel, I make practical videos about embedded systems or, in general terms, about building and programming hardware.