The Making of a Spiral Welded Damascus Gun BarrelSteve Culver2012-10-14 | The process of forging a spiral welded damascus gun barrel. By: Master Bladesmith, Steve Culver of Meriden, Kansas September, 2012Muzzleloader Pistol StockSteve Culver2026-01-10 | This video documents a small portion of the work involved in making a muzzleloading pistol stock. The completed stock was used as a platform to test other muzzleloading parts and pieces after final assembly, seen in the final seconds of this video.
None of the information seen in this video is to be used for instructional or tutorial purposes. A significant amount of technical and safety related information is omitted for brevity. Attempts to duplicate the work seen in this video may be dangerous.Damascus Percussion LockSteve Culver2026-01-10 | This video showcases the jigs that I made to use in the construction of the internal parts of a firearm sidelock mechanism. In pondering how locks were historically made, it seemed to me that the makers would have chosen to use hardened steel jigs to shape the parts. In this way, only saws and files were necessary to quickly create consistently dimensioned parts. Being able to make consistently dimensioned parts would greatly reduce the time needed for fit-up and adjustments during final assembly of the lock. The jig that I built for making a lock tumbler has two steel plates that hold the tumbler blank for shaping. These two plates can be reversed for the purpose of making a tumbler for either right-hand or left-hand locks. This feature would be very convenient when making locks for side-by-side firearms. All of the jigs seen being used in this video are of O-1 tool steel. After the machine work to create the jigs was completed, they were fully hardened and were left in a fully hardened state. No tempering to soften the jigs was done.
The completed lock was tested with other muzzleloading parts and pieces after final assembly, seen in the final seconds of this video.
None of the information seen in this video is to be used for instructional or tutorial purposes. A significant amount of technical and safety related information is omitted for brevity. Attempts to duplicate the work seen in this video may be dangerous.Damascus Pistol BarrelSteve Culver2026-01-10 | This video documents my attempts to recreate the lost art of gun barrel welding. The techniques that I used were designed to produce an item with the same characteristics as was found in antique barrels. The final work piece was built into a muzzleloading percussion pistol. Final testing seen in this video was utilized to confirm that my methods of construction were successful and the finished work was sound.
This documentary includes clips from a silent movie made by the Musée de la Vie wallonne (Museum of Walloon Life). This museum exists to showcase the life of people living in the Wallonia region of Belgium. The museum created a series of movies about different aspects and occupations of people living in that region circa 1925. Damascus gun barrel forging was one of the industries in that era and so this film was included in the series. A gentleman named Pete Mikalajunas obtained a copy of the movie from the museum and received permission to distribute it. Pete added the written narration and music to the version of the video that he distributed. Mr. Mikalajunas graciously gave me permission to use clips from his video.
None of the information seen in this video is to be used for instructional or tutorial purposes. A significant amount of technical and safety related information is omitted for brevity. Attempts to duplicate the work seen in this video may be dangerous.Auto DaggerSteve Culver2022-07-09 | Automatic opening dagger, by Steve Culver. Blade & Lockbar material: CTS-XHP Handle frame: 410 Stainless Steel Handle inlay material: Mosaic AbaloneDual Action FolderSteve Culver2021-05-19 | Dual Action Folder, by Steve Culver Blade: CTS-XHP steel. Handle Material: Mother of Pearl. Liners: Titanium. Bolsters: Stainless Steel. Gold plated screwsBarrel Reforging into Pistol Tube - Short VersionSteve Culver2017-07-28 | This video documents the re-forging of an original damascus shotgun barrel tube forging, changing it into a tube for a pistol barrel. The shotgun tube forging is approximately 100 years old and is how it came from the blacksmith shop, never having been machined into a finished barrel tube. Steve Culver re-forges this shotgun tube smaller in diameter, to create a tube that can be finished out into a .50 caliber pistol barrel.
This shorter video of the barrel re-forging, contains only my commentary to explain the work shown and enough of the forging process to illustrate how the work was accomplished. A full length video, which includes all of the forging done, an overview of the tools used and commentary on the construction of antique damascus gun barrels can be found here on my YouTube channel.
The primary purpose of the work shown in this video, was to provide a plausible source for the damascus material used to create barrels for antique pistols which incorporated damascus gun barrels. The theory to be proven; that small bore damascus pistol barrels could be made by re-forging short sections of large bore barrels, which were originally created for use in shotguns.Barrel Reforging into Pistol TubeSteve Culver2017-07-26 | This video documents the re-forging of an original damascus shotgun barrel tube forging, changing it into a tube for a pistol barrel. The shotgun tube forging is approximately 100 years old and is how it came from the blacksmith shop, never having been machined into a finished barrel tube. Steve Culver re-forges this shotgun tube smaller in diameter, to create a tube that can be finished out into a .50 caliber pistol barrel.
This video includes the entire process of re-forging the barrel tube, as well as an overview of the tools used. Also included is commentary on the construction of antique damascus gun barrels, as well as resources for damascus barrel research and where antique damascus barrel forgings may be purchased.
The point of this video is to share information gained through hands on experience, for the purpose of historical research and knowledge. The primary purpose of the work shown in this video, was to provide a plausible source for the damascus material used to create barrels for antique pistols which incorporated damascus gun barrels. The theory to be proven; that small bore damascus pistol barrels could be made by re-forging short sections of large bore barrels, which were originally created for use in shotguns.Culver Assisted Opening FolderSteve Culver2017-01-09 | Assisted Opening Folder, by Steve Culver
Blade: CTS-XHP steel. Handle Material: Amber Stag. Liners: Titanium. Bolsters: Stainless Steel. Gold plated screws.Laffites Revenge FiringSteve Culver2013-04-22 | First firing of Laffite's Revenge. A "Cut-N-Shoot" combination weapon that incorporates a spiral welded damascus gun barrel and a damascus steel flint-lock mechanism, also shown in videos on this channel.
All parts and assembly by Master Bladesmith Steve Culver, of Meriden, KS. The attached knife blade is a 12 inch, Woodhead bowie style blade in damascus steel.
The loading was 26 grains of FFF black powder, .490" round ball with a .015" patch. FFF powder was also used in the flash pan.
This weapon won the Best of the Rest Award at the 2013 Blade Show