Looking at Stirlingkits Steam Engine and Generator Acutabove Woodworking 2026-09-20 | Looking at Stirlingkits Steam Engine and Generator
How to Make Gnocchi Acutabove Woodworking 2023-03-28 | On Friday's episode of the show, I demonstrated how to make a gnocchi paddle and I thought that it would be a fun idea to demonstrate on today's show (with the help of my wife) how to make homemade gnocchi. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.If you are interested in the show demonstrating how to make a gnocchi paddle, you can find it here. youtu.be/0h1IYyySJtU
Making a Gnocchi Board Acutabove Woodworking 2023-03-24 | On this week's show, I delve into something a little different and demonstrate how to make a gnocchi board (or paddle) with scrap stock. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Assembly and Bed Levelling of the Creality Ender 3 V2 Neo 3D Printer Acutabove Woodworking 2023-03-21 | On last week's show, I brought you the Creality, Ender 3 V2 Neo 3D printer and I had several messages requesting a setup and assembly video. So by viewer request, on this week's show, I demonstrate how to assemble and set up your 3D printer to get it ready for your first print. I hope you enjoy the show.PLEASE NOTE!!!!!!!I made an error while speaking on the show regarding adjusting the Z-offset while printing. I mentioned that when I adjusted the value from -1.70 to -1.68 that it would tighten things up and bring the printer nozzle closer to the print bed. This is 100% inaccurate. It will actually move the printer nozzle further away from the print bed. Turning the adjustment knob clockwise will raise the printer head and counter clockwise will lower it. Sorry about that. I hope this clears things up.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.If you are interested in getting yourself one of these 3D printers, you can find it here.amazon.ca/dp/B0B6FGD5GN amazon.ca/dp/B0B6FHQN9Q Don't forget to use the discount code CUBHP5KJ to get a 6% discount. (please note that the code is only valid until March 31, 2023)If you are interested in the thingiverse website, you can find it here. www.thingiverse.comIf you are interested in the file for the filament relocation bracket, you can find it here. thingiverse.com/thing:5722645 If you are interested in the tool holder file, you can find it here. thingiverse.com/thing:5578313If you would like to download UltiMaker Cura as your slicing software, you can find it here. ultimaker.com/software/ultimaker-cura
Making a Toddlers Booster Seat Acutabove Woodworking 2023-03-17 | On this week's show, I demonstrate how to make a toddler's booster seat to elevate them just enough, to sit at the table with the adults, instead of in a high chair. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
A Look at Crealitys Ender 3 V2 Neo 3D Printer Acutabove Woodworking 2023-03-14 | On this week's show, I test the Creality, Ender 3 V2 Neo 3D printer. I have never used a 3D printer prior to the filming of this episode so this is a whole new experience for me. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.If you are interested in getting yourself one of these 3D printers, you can find it here.amazon.ca/dp/B0B6FGD5GN amazon.ca/dp/B0B6FHQN9Q Don't forget to use the discount code CUBHP5KJ to get a 6% discount. (please note that the code is only valid until March 31, 2023)If you are interested in the thingiverse website, you can find it here. www.thingiverse.comIf you are interested in the file for the filament relocation bracket, you can find it here. thingiverse.com/thing:5722645 If you are interested in the tool holder file, you can find it here. thingiverse.com/thing:5578313If you would like to download UltiMaker Cura as your slicing software, you can find it here. ultimaker.com/software/ultimaker-cura
Making a Scroll Saw Spoon Rest Acutabove Woodworking 2023-03-10 | On this week's show, I demonstrate how to use your scroll saw (or bandsaw) to make some miniature spoon rests. With a little bit of resin work and some laser embellishments, this project has a little bit of everything. I hope you enjoy it.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Making Custom Fridge Magnets Acutabove Woodworking 2023-03-07 | On this week's show, I demonstrate how to make strong, custom fridge magnets using a combination of my laser engraver and a scroll saw. This project is easily converted to a scroll saw and wood burning project so if you don't have a laser engraver, this project could still be very much, up your alley.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.If you are interested in the magnets that I used on today's show, you can find them here.amazon.ca/dp/B072K5SLXK?ref=ppx_yo2ov_dt_b_product_details&th=1
Making Toys and Joys Road Grader Part 8 Acutabove Woodworking 2023-03-03 | On this week's show, I bring you part 8 (and the finale) of a multi part build on the making of Toys and Joys pattern #70, the Road Grader.I hope that you will get a set of the plans for yourself and follow along on Fridays for the build.If you are interested in getting a set of the plans, you can find them here. toysandjoys.com/70-the-road-grader.htmlIf you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
A Visit with Acutaboves Q C Department Episode 4 Acutabove Woodworking 2023-02-28 | On this week's show, I bring you episode 4 of the Q.C. department or as it is more affectionately know, the Questionable Comment department. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Making Toys and Joys Road Grader Part 7 Acutabove Woodworking 2023-02-24 | On this week's show, I bring you part 7 of a multi part build on the making of Toys and Joys pattern #70, the Road Grader.I hope that you will get a set of the plans for yourself and follow along on Fridays for the build.If you are interested in getting a set of the plans, you can find them here. toysandjoys.com/70-the-road-grader.htmlIf you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Show Updates 2023 part 2 Acutabove Woodworking 2023-02-21 | On this week's show, I bring you part two of my early 2023 show updates. I hope you enjoy the show and find it to be useful and entertaining.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.If you are interested in viewing any of the episodes that I mention in today's show, you can find them at the following links.Repairing a Hammeryoutube.com/watch?v=27ZFThjed0U&t=21sMaking a Safety Ruleryoutube.com/watch?v=Jj-Skwoy-F8Dowel Making Jig Part 1youtube.com/watch?v=lc4o3Ch3CvA&t=38sDowel Making Jig Part 2youtube.com/watch?v=QgbAaGLklFs&t=1sMaking a Ukulele Part 2 (Thickness Sander Build)youtube.com/watch?v=C27wevA64Ig&t=230sMaking a Hand Saw Rackyoutube.com/watch?v=syxVAQIY83s
Making Toys and Joys Road Grader Part 6 Acutabove Woodworking 2023-02-17 | On this week's show, I bring you part 6 of a multi part build on the making of Toys and Joys pattern #70, the Road Grader.I hope that you will get a set of the plans for yourself and follow along on Fridays for the build.If you are interested in getting a set of the plans, you can find them here. toysandjoys.com/70-the-road-grader.htmlIf you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Show Updates 2023 Part 1 Acutabove Woodworking 2023-02-14 | On this week's show, I bring you part one of my regular instalment of show updates. Truth be told, this 2 part series was supposed to air in the fall of 2022, but due to scheduling conflict, it had to be re-scheduled. I hope you enjoy the program.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.If you are interested in viewing any of the shows listed in today's episode, you can find them at the links listed below. Enjoy.Animated Animal Toys in Woodyoutube.com/watch?v=54aygahvJ_I&t=476sMaking Crayon Boatsyoutube.com/watch?v=R7NilnPCRrM&t=329sAcutabove Woodworkings Websitewww.acutabovewoodworkings.comMaking Toys and Joys 1928 Ford Stake Bed Truckyoutube.com/watch?v=dQ6f_kCtSQY&t=131sMaking a Toy Flatbed Truckyoutube.com/watch?v=Emgbp9G-atI
Making Toys and Joys Road Grader Part 5 Acutabove Woodworking 2023-02-10 | On this week's show, I bring you part 5 of a multi part build on the making of Toys and Joys pattern #70, the Road Grader.I hope that you will get a set of the plans for yourself and follow along on Fridays for the build.If you are interested in getting a set of the plans, you can find them here. toysandjoys.com/70-the-road-grader.htmlIf you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Adding Lights to the xTool Portable Enclosure Acutabove Woodworking 2023-02-07 | After working with the xTool enclosure for a while, I found the interior to be lacking in lights, so on this week's show, I add my own after market lighting to the interior of the enclosure. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.If you are interested in my original soldering tutorial, you can find it here. youtube.com/watch?v=2n3gM_2OcmAIf you are interested in the LED lights that I used on this project, you can find them here. amazon.ca/gp/product/B07V46H7YL/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Making Toys and Joys Road Grader Part 4 Acutabove Woodworking 2023-02-03 | On this week's show, I bring you part 4 of a multi part build on the making of Toys and Joys pattern #70, the Road Grader.I hope that you will get a set of the plans for yourself and follow along on Fridays for the build.If you are interested in getting a set of the plans, you can find them here. toysandjoys.com/70-the-road-grader.htmlIf you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Bondic Liquid Plastic Acutabove Woodworking 2023-01-31 | I was given the opportunity to try out a different kind of "adhesive". The folks at Bondic contacted me and asked if I'd like to receive a sample of their liquid plastic welder and I thought "why not?". I've been so pleased with the results of this product over the past few months that I decided to bring it here to the show to bring it to the attention of my viewers. While it does have a few limitations, everything that I have repaired or used it for has been a complete success.If you would like more information on Bondic Liquid Plastic or would like to get some for your shop, visit notaglue.com.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Making Toys and Joys Road Grader Part 3 Acutabove Woodworking 2023-01-27 | On this week's show, I bring you part 3 of a multi part build on the making of Toys and Joys pattern #70, the Road Grader.I hope that you will get a set of the plans for yourself and follow along on Fridays for the build.If you are interested in getting a set of the plans, you can find them here. toysandjoys.com/70-the-road-grader.htmlIf you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Making a Vinyl Record Clock Acutabove Woodworking 2023-01-24 | On this week's show, I demonstrate how to make a pattern and cut yourself a wall clock, made from an old vinyl record. A little bit of laser engraving to duplicate the album label with the Wainlux L6 10watt engraver really finishes this project off. I hope you enjoy the show.If you are interested in the 4 set of clock movements, you can find them here. amazon.ca/gp/product/B09QCT6TVG/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1If you are interested in getting a Wainlux L6 engraver of your own, you can find it here. amazon.ca/WAINLUX-Engraver-Engraving-Compressed-LightBurn/dp/B0BFGTL83S/ref=sr_1_1_sspa?crid=TO0KCC0IC6IB&keywords=l6+engraver&qid=1669029707&qu=eyJxc2MiOiIxLjI2IiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sprefix=l6+engraver%2Caps%2C91&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1Be sure to use the discount code of 8KSLGI93 to receive an additional $100 (CAD) off the price of the engraver.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Making Toys and Joys Road Grader Part 2 Acutabove Woodworking 2023-01-20 | On this week's show, I bring you part 2 of a multi part build on the making of Toys and Joys pattern #70, the Road Grader.I hope that you will get a set of the plans for yourself and follow along on Fridays for the build.If you are interested in getting a set of the plans, you can find them here. toysandjoys.com/70-the-road-grader.htmlIf you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
TCEK Folding Camp Chair Acutabove Woodworking 2023-01-17 | On this week's show, I check out and provide a first impression of TCEK's folding camp chair. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.If you are interested in more information about TCEK products, you can visit their website at tcek.comIf you are interested in purchasing a TCEK folding camp chair for yourself, you can find them at the following link. amazon.com/TCEK-Portable-Chair-Backpacking-Lightweight/dp/B0BHYC5PY6
Making Toys and Joys Road Grader Part 1 Acutabove Woodworking 2023-01-13 | On this week's show, as promised, I start a multi part build on the making of Toys and Joys pattern #70, the Road Grader.I hope that you will get a set of the plans for yourself and follow along on Fridays for the build.If you are interested in getting a set of the plans, you can find them here. toysandjoys.com/70-the-road-grader.htmlIf you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
XTool Laser Enclosure Acutabove Woodworking 2023-01-10 | On this week's show, I assemble and test my new xTool portable laser enclosure. I hope you enjoy the show.If you are interested in this enclosure, you can find it here: xtool.com/products/xtool-enclosureIf you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Making a Garden Swing Decoration Acutabove Woodworking 2023-01-06 | For many years, my father and grandfather would make these small garden swing decorations to display in the yard. Both men are no longer with us, but I have decided to keep their project alive by reproducing one on the show today. I hope you like it.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.If time permits, I will have a set of plans for this garden swing on my website, that are available for free download. Just visit acutabovewoodworkings.com and click on the free patterns section.
Blooper Reel #17 Acutabove Woodworking 2023-01-03 | On this week's show, sit back, grab a coffee and enjoy my mistakes in Blooper Reel 17. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell so that you don't miss the notifications of future episodes of the show.As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Kennys Top Ten Shows of 2022 Acutabove Woodworking 2022-12-30 | On this week's show, being only a day away from New Year's Eve, I thought I would reflect on the past year and provide my list of the top 10 shows of the 2022 season. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell so that you don't miss the notifications of future episodes of the program.As always I want to thank you for taking the time to stop by the channel and tune in to today's show. It is very much appreciated. From my family to yours, I want to wish you all a Happy New Year and all the best in 2023.If you are interested in watching any of the shows I mentioned on today's episode, you can find them at the links below.Making Santa's Footprints.youtube.com/watch?v=N_8aF02XcLQ&t=3sTesting the Husky HVLPyoutube.com/watch?v=R5sVMSzLIagHow About Some Dad Jokesyoutube.com/watch?v=wLeBPEDCV5IXTool D1 Pro 20watt Laser Engraveryoutube.com/watch?v=CADqqs1zEqEMaking a Halloween Door Skullyoutube.com/watch?v=8HvbFUG-xmo&t=331sWhat the Heck is in Kenny's Shop?youtube.com/watch?v=XwDbWhQsQ0kWhat the Heck is in Kenny's Shop 2?youtube.com/watch?v=1oVxrCQ-bAgWhat the Heck is in Kenny's Shop 3?youtube.com/watch?v=V-RRtMdhYyE&t=549sWhat the Heck is in Kenny's Shop 4?youtube.com/watch?v=jhCSPV0YrF4&t=1sMaking a Toy Bulldozeryoutube.com/watch?v=YkgavviFj5MMaking Toys and Joys New Excavator. Part 1youtube.com/watch?v=V_34vhPu-ME&t=80sThe Crafts of Kenny's Wifeyoutube.com/watch?v=PjkFqZ1cNQQHand Cut Inlaid Dovetailsyoutube.com/watch?v=YhkxT6XSrv8
Answering Your Wainlux L6 Questions Acutabove Woodworking 2022-12-27 | After receiving multiple questions regarding the Wainlux L6 10 watt laser engraver, I decided to do some testing on today's show and answer those questions for you. I hope you find the show to be informative.If you are interested in getting a Wainlux L6 engraver of your own, you can find it here. amazon.ca/WAINLUX-Engraver-Engraving-Compressed-LightBurn/dp/B0BFGTL83S/ref=sr_1_1_sspa?crid=TO0KCC0IC6IB&keywords=l6+engraver&qid=1669029707&qu=eyJxc2MiOiIxLjI2IiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sprefix=l6+engraver%2Caps%2C91&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1Be sure to use the discount code of 8KSLGI93 to receive an additional $100 (CAD) off the price of the engraver.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Making a Desktop Inbox Tray Acutabove Woodworking 2022-12-23 | On this week's show, I use some scrap stock to demonstrate how to make an inbox tray for your desk. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Money Making Projects You Can Make With the Longer Ray 5 Acutabove Woodworking 2022-12-20 | I was provided with an opportunity to work with the Longer Ray5, 10 watt laser engraver and on this week's show, I show some projects that you can make with the Longer Ray 5 to make some extra money. The majority of the projects that I made on this show were made from free downloadable patterns from librarylaser.com which is a site that has plenty of free content to download for your laser project needs. If you are interested in the Longer, Ray5 10 watt laser engraver, you can find it here. https://s.zbanx.com/r/NJNRdLKfZEAwThis is a very cost-effective 10W laser engraving machine, the current price is $449If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Making an F1 Racecar Toy Acutabove Woodworking 2022-12-16 | On this week's show, by viewer request, I get back into a little toy designing and demonstrate how to make a great little F1 racer. If you would like the pattern for this toy, it is free for the taking. Just visit my website at acutabovewoodworkings.com and click on the free patterns section. I hope you enjoy it.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
5 Last Minute Gifts to Make With the Longer Ray5 Acutabove Woodworking 2022-12-13 | I was provided with an opportunity to work with the Longer Ray5, 10 watt laser engraver and instead of doing an unboxing or an assembly video, I decided that I would demonstrate 5 last minute gift ideas that you can make with this machine. The majority of the projects that I made on this show were made from free downloadable patterns from librarylaser.com which is a site that has plenty of free content to download for your laser project needs. If you are interested in the Longer, Ray5 10 watt laser engraver, you can find it here. https://s.zbanx.com/r/NJNRdLKfZEAwThis is a very cost-effective 10W laser engraving machine, the current price is $449If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Making a North Pole Sign Acutabove Woodworking 2022-12-09 | On this week's show, I have a little fun with a scrap wood project to make an adorable North Pole Christmas decoration. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel. While you are at it, why not click the bell so that you don't miss the notifications of future episodes of the show.As always, I want to thank you for taking the time to drop by the channel and check out today's episode. It is truly appreciated.
Making Ceramic Tile Trivets Acutabove Woodworking 2022-12-06 | On this week's show, I play around with an old ceramic tile, a 20 watt laser engraver and some scrap cherry to make a trivet. This is a quick and easy project that makes a great gift and is also a great way to use up scrap wood. If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell so that you don't the notifications of future episodes of the show.As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Making a Folding Camp Stool Acutabove Woodworking 2022-12-02 | On this week's show, I demonstrate how to make some really great folding camp stools. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell so that you don't miss the notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is very much appreciated.
Engraving Canvas with the Wainlux L6 Engraver Acutabove Woodworking 2022-11-29 | On this week's show, I use the Wainlux L6, 10watt laser engraver to demonstrate how to engrave stretched canvas to create works of art for your home. I hope you enjoy the show.If you are interested in getting a Wainlux L6 engraver of your own, you can find it here. amazon.ca/WAINLUX-Engraver-Engraving-Compressed-LightBurn/dp/B0BFGTL83S/ref=sr_1_1_sspa?crid=TO0KCC0IC6IB&keywords=l6+engraver&qid=1669029707&qu=eyJxc2MiOiIxLjI2IiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sprefix=l6+engraver%2Caps%2C91&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1Be sure to use the discount code of 8KSLGI93 to receive an additional $100 (CAD) off the price of the engraver.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Making File Handles Acutabove Woodworking 2022-11-25 | On this week's show, I demonstrate how to make custom handles for your files. I hope you enjoy the content. If you haven't already, please consider liking and subscribing to the channel. While you are at it, why not click the bell so that you don't miss the future notification of the show.As always, I want to thank you for taking the time to stop by the channel and tune in to today's show. It is very much appreciated.
The Wainlux L6 10 Watt Laser Engraver Acutabove Woodworking 2022-11-22 | The good folks at Wainlux have sent me another laser to test. This time, it is the big brother to the K6 unit that was showcased on the channel not too long ago. On this week's show, we assemble and do some quick testing of the Wainlux L6, 10 watt laser engraver. I hope you enjoy the show.If you are interested in getting a Wainlux L6 engraver of your own, you can find it here. amazon.ca/WAINLUX-Engraver-Engraving-Compressed-LightBurn/dp/B0BFGTL83S/ref=sr_1_1_sspa?crid=TO0KCC0IC6IB&keywords=l6+engraver&qid=1669029707&qu=eyJxc2MiOiIxLjI2IiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sprefix=l6+engraver%2Caps%2C91&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1Be sure to use the discount code of 8KSLGI93 to receive an additional $100 (CAD) off the price of the engraver.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell to get notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Making a Pet Brush Acutabove Woodworking 2022-11-18 | On this week's show, I demonstrate how to make a great, hair removing pet brush. An easy project for all skill levels and a great brush that can easily be made from scrap stock. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell so that you won't miss the notifications of future episodes of the show.As always, I want to thank you for taking the time to drop by the channel and tune in to today's episode. It is very much appreciated.
Making Santas Footprints Acutabove Woodworking 2022-11-15 | On this week's show, I demonstrate how to make templates in order to create the magic of Christmas in your house on Christmas morning. These templates allow you to make "snowy" Santa footprints for your children to be excited about on Christmas morning. I hope you enjoy the project.As always I want to thank you so much for taking the time to stop by the channel. I hope you will consider liking and subscribing to the channel and while you are at it, why not click the bell so that you won't miss future notifications of the show. Thanks a ton for tuning in to the show.As with most of my designs, this pattern is free for the asking. All you need to do is send me an email at kennye@acutabovewoodworkings.com and I would be more than happy to send a copy your way. You can also visit the website's free pattern section to download a copy if you wish. acutabovewoodworkings.com/free-patterns
Making a Childrens Artwork Frame Acutabove Woodworking 2022-11-11 | On this week's show, I demonstrate how to make a stylish children's artwork frame to tidy up all those drawings that are on the side of your refrigerator. I hope you enjoy today's show.If you haven't already, please consider liking and subscribing to the channel. As always, I want to thank you for taking the time to stop by the channel and check out today's show. It's truly appreciated.If you are interested in the ball latch that I used on this project, you can find them here. leevalley.com/en-ca/shop/hardware/box-hardware/clasps/46514-ball-clasps?item=00D8201
Wainlux K6 Laser Engraver Acutabove Woodworking 2022-11-08 | The good folks at Wainlux were kind enough to provide me with their K6 Laser Engraver to try out. I thought it would be a great and economical option for those of you who wanted a smaller laser engraver for adding accents to your crafting projects. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell so that you don't miss the notifications of future episodes of the show.As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.If you are interested in purchasing the Wainlux K6 Laser Engraver, you can find it here. https://l.facebook.com/l.php?u=https%3A%2F%2Fwww.amazon.ca%2Fgp%2Fproduct%2FB09YTVJLZM%3Ffbclid%3DIwAR1DYSkRBeTRE2yqN_wh7_O8aYIQEBIKAYy7I7oTUC9z4JIIdo6-ZxPJQus&h=AT3nNfOBl-DxyPwrwjP1NmiojJtpj7FajtjOPYj8U-cPxJFcwwB4nB3Msze3sH-yQEf3NTJLJpqNuRIBvBroG_BTFIHlKjFnDNoXbUg8K4DieVwtl04P5iE_uFG57Nb7TYF_fOA
Making the Hungry Hippo Acutabove Woodworking 2022-11-04 | On this week's show, with Christmas fast approaching, I revisit David Wakefield's book, Animated Animal Toys in Wood to make his Hungry Hippo project. I hope you enjoy the showIf you are interested in purchasing this book, you can find it here. amazon.ca/Animated-Animal-Toys-Wood-Projects/dp/1565238443/ref=sr_1_1?crid=229BT92WJASOL&keywords=David+wakefield&qid=1659063441&s=books&sprefix=david+wakefield%2Cstripbooks%2C393&sr=1-1If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell so that you don't miss the notifications of future episodes of the show.As always, I want that thank you for taking the time to stop by the channel and tune in to today's show. It is very much appreciated.
XTool RA2 Pro Rotary Attachment Acutabove Woodworking 2022-11-01 | As promised, on this week's show, I unbox and demonstrate Xtool's RA2 Pro rotary attachment. I also make my first attempt at engraving a drinking glass and take you along for the ride. Did I manage to get a glass engraved successfully? Watch the show to find out.If you are interested in the RA2 Pro rotary attachment, you can find it here. xtool.com/products/xtool-ra2-pro-the-worlds-first-4-in-1-rotary-for-laser-engraverIf you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell so that you won't miss the notifications of future episodes of the show.As always, I want to thank you for taking the time to drop by the channel and check out today's episode. It is truly appreciated.
Making a Box Frame Acutabove Woodworking 2022-10-28 | On this week's show, I demonstrate how to make a fun box frame to display your most prized possessions. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell so that you don't miss the notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
Xtool D1 Pro 20 Watt Laser Acutabove Woodworking 2022-10-25 | On this week's show, I unbox, assemble and do some quick testing with the XTool, D1 Pro 20 watt laser engraver. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell so that you don't miss the notifications of future episodes of the program.As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. I truly appreciate it.If you are interested in the xTool D1 Pro 20 watt laser, you can find it here. xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-bAmazon also sells it.
Making a Pop Can Tab Pull Acutabove Woodworking 2022-10-21 | By viewer request, on this week's show I do a "fly by the seat of my pants" build and attempt to make a pop can tab pull to make opening pop cans easier. I think the project was a success and I hope you enjoy it.If you are interested in the Bottle Opener episode, you can find it here.youtube.com/watch?v=68bup-z9BGU&t=21sIf you haven't already, please consider liking and subscribing to the channel. While you are at it, why not click the bell so that you won't miss notifications of future episodes of the show.As always, I'd like to thank you for taking the time to stop by the channel and tune in to today's episode. It is very much appreciated.
Scroll Saw Blade Removal Tool Acutabove Woodworking 2022-10-18 | For those who have problems with smaller thumb screws that hold your scroll saw blades in place, this show is for you. On this week's show, I demonstrate how to make a simple tool that will make this task much easier for you. I hope it helps.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell so that you don't miss the notifications of future episodes of the program.As always, I want to thank you for taking the time to stop by the channel and tuning in to today's show. I truly appreciate it.
Making a Scroll Saw Chain Saw Acutabove Woodworking 2022-10-14 | On this week's show, I demonstrate how to make a "chain saw" using compound cutting on your scroll saw. It's a challenging and time consuming project that is a great skill builder. I hope you enjoy it.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell so that you don't miss the notifications of future episodes of the show.As always I want to thank you for taking the time to stop by the channel and check out today's show.If you are interested in my video on squaring up your scroll saw blade, you can find it here. youtube.com/watch?v=t8QPAEXiC5cIf you are interested in obtaining the pattern for the chain and the handle, they are both available for free download on my website. Visit acutabovewoodworkings.com and click on the free patterns section.
Im Sorry But I Dont Work Here Acutabove Woodworking 2022-10-11 | On this week's show, a little rant and my opinion on what is going on at the Home Depot. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell so that you don't miss the notifications of future episodes of the program.As always, I want to thank you for taking the time to stop by the channel and tune in to today's show. It is very much appreciated.
Making an HVLP Paint Gun Stand Acutabove Woodworking 2022-10-07 | After struggling to fill my HVLP gun's paint reservoir I decided to check online to see about commercially available paint gun stands. The price of them made me make my own and on today's show, I take you along for the "fly by the seat of my pants" build. I hope you enjoy the show.If you haven't already, please consider liking and subscribing to the channel and while you are at it, why not click the bell so that you won't miss the notifications of future episodes of the show. As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode.
