Matt PilzThis is the first challenge for the April 2011 Gish competition. Three paths to complete Factory1, and I include a pretty funny blooper at the end (so close!)...
The developers of my favorite Indy game, Gish, are holding contests all this month as they unveil some challenging new levels for the game. If you can complete the level challenges and/or follow them on Facebook/YouTube, you have a chance of winning a GameCom 777 headset!
P.S., Chronic Logic has a special now where you can buy Gish for whatever you think it's worth!
Gish Challenge 2011: Level 1 - Break inMatt Pilz2011-04-06 | This is the first challenge for the April 2011 Gish competition. Three paths to complete Factory1, and I include a pretty funny blooper at the end (so close!)...
The developers of my favorite Indy game, Gish, are holding contests all this month as they unveil some challenging new levels for the game. If you can complete the level challenges and/or follow them on Facebook/YouTube, you have a chance of winning a GameCom 777 headset!
P.S., Chronic Logic has a special now where you can buy Gish for whatever you think it's worth!
Level 1 - "Break in"Youve Never Seen This Space Invaders Clone! 👾 📺Matt Pilz2022-11-24 | I'm a fan of the obscure and the short-lived Interact Home Computer of 1978 certainly fits that bill. The system was entirely cassette-based so you'd have to wait anywhere from 40 seconds to 4+ minutes for a game to load into memory. Even so, a handful of fun games were developed for it at the time including this surprisingly fun and playable clone of Space Invaders. My favorite part of the system is the way cassette data is audible and converts the screen to a title as it loads.GUIDE: Downgrade Google Suite to Free Edition for Personal Use (November 2022)Matt Pilz2022-11-12 | Quick tutorial on how you can continue enjoying Google Suite Free Edition for personal use, regardless of the deadlines that Google previously imposed to submit exceptions. This method is working as of November 2022 and very quick to complete.
00:00 - Introduction 01:47 - Downgrade Guide
If you are already signed in as an administrative user for the G Suite account in question, you may be able to directly visit the URL to confirm free eligibility. But for the sake of completeness I'd recommend you follow the steps in the video to ensure your account session data carries over to the support chat before requesting the free downgrade.
This is running on an unmodified Atari XEGS and a 1980s 5.5" Magnavox color CRT. AVGCart houses a custom encoded NTSC excerpt from the VHS copy of Thriller, played back using AVF Video Player, which creatively pushes the 8-bit to advanced capabilities.
If anyone's interested in the video clip itself for their own Atari playback I can upload it.
#ThrillerChallengeCRT Chronicles: 50 Year Old Zenith E1335 Restore then Super Mario World (SNES)Matt Pilz2022-10-07 | Someone had tossed this 1972 set to the curb. A little TLC (bad rectifier tube, dry solder joints at speaker, static in pots, filth) and it was back in order, and looks great for some monochrome SNES action!Resurrecting Moneta: Cracking and Patching Abandonware Software - A MethodologyMatt Pilz2022-09-18 | This is a condensed visual summary to my in-depth blog article on the topic, using an old and obscure program a friend asked me to patch so that it can work on modern operating systems and without requiring the now unobtainable licensing credentials. This is presented in the context of abandonware, but is general enough that it is applicable to a wide range of software products. Full article: mattpilz.com/moneta
00:00 - Introduction 00:48 - Phase 1: Imaging the Original Media 02:17 - Phase 2: Assessing the Installer 03:59 - Phase 3: Auditing System Changes 05:30 - Phase 4: Probing the Underlying Software Architecture 06:12 - Phase 5: Determining the License Validation Method 09:07 - Phase 6: Patching the Executable 14:57 - Phase 7: Resource Editing 19:36 - Phase 8: Creating an Installer 22:31 - Phase 9: Whitelisting the Installer ExecutablePre-Microprocessor: BASIC Programming on a 1972 Teletype (D-116)Matt Pilz2022-09-12 | This was a stand-out favorite to me at the 2022 Vintage Computer Festival in Chicago. A fully operational teletype computer from 1972, the D-116. Through a series of bootstrapping and punch tape loads, eventually a BASIC interpreter is saved to core memory. Then, using a teletype typewriter you can input BASIC commands and execute them. Saving and loading is achieved through similar punch tape.
A full demonstration of this unit from VCF 2020 is here: youtube.com/watch?v=tbxW85Cj6y8Vectrex Console: Complete Screen Calibration and More (2022 Definitive Guide)Matt Pilz2022-08-15 | This is my definitive guide on calibrating the full gauntlet of adjustments to bring your 1982 Vectrex back to pristine condition. It covers more than 12 individual tests in a concise manner, with each being demonstrated in a minute or less. You can skip to any section using the chapter marks below:
00:00 - Disclaimer and Introduction
00:55 - Normal Vectrex Imperfections
01:51 - Servicing Prerequisites
02:52 - Disassembly and Inspection
03:52 - Fuse Inspection and Testing
04:52 - Baseline Voltage Checks
05:50 - DAC Offset (Scope & Multimeter)
06:45 - High Voltage CRT Calibration
07:38 - Flyback Timer Fine-Tuning
08:38 - Width and Height Adjustments
09:32 - Centering Using Neck Rings
10:33 - Integrator X/Y Rate Offsets
11:28 - Brightness (Intensity) Optimization
12:20 - Crackling Volume and Pot Cleaning
13:20 - Controller Repair (Drift/Response)
14:21 - De-Buzzing Considerations
15:20 - What’s Next? Ideas for Fun!
#Vectrex #adjustment / #repair #calibration #crtgaming #retrogaming #retrocomputingArduboy FX and a CRT: Audio Out Mod and Playing on CRT Magnifier (Atlas 600)Matt Pilz2022-07-20 | Thought it'd be convenient to add a simple audio out to the micro handheld Arduboy FX, since the internal speaker is so quiet. It was a super easy $0.70 mod using a 3.5mm splitter I picked up on clearance and a few minutes of time. From this I can now output to headphones, aux speakers or RCA to stereos/TVs. I test this on an Atlas 600 magnifier with S-Video CRT. This is a purely analog approach, there are emulators including for MiSTer FPGA, but I like messing with the actual hardware.Obscure Tech Dev 01: Panasonic HHC (1981) - Tapping Into Video Out (We Get Color!)Matt Pilz2022-05-16 | Thought it might be interesting to capture some of my meandering thoughts, brainstorming and discovery (and lots of 'umms...') in real-time as I revisit the 1981 Panasonic HHC handheld computer and test drive the official video out adapter that few have ever seen. Eventually it is my ambition to document enough of the system to develop a simple game for it, while also producing a website to gather all info and resources as I go along. Not much is out there about this system and virtually nothing about its video output adapter capabilities, which are actually quite versatile and powered by the same chip as the Color Computer, MC-10 and others.
0:00 - Introduction 19:37 - Video Out Experimenting 1:10:15 - Putting it All Together (Modes and Characters) 1:22:28 - ConclusionTyping of the Dead at Midwest Gaming Classic 2022 (Sega Dreamcast)Matt Pilz2022-05-03 | First time trying out the keyboard for Dreamcast and the spin-off "Typing of the Dead" - Kind of fun and enough modes and levels to keep it interesting for novices and experts. Well, except for the part where it transforms into a trivia game. Wasn't a fan of that. Also had a two player co-op/battle mode.The Power of Mattel Aquarius...Matt Pilz2022-03-11 | I just pushed out an update to Aquarius Draw, a free utility I developed last year for creating 8-bit art (and accompanying code) within the specs of the very underpowered Mattel Aquarius of 1983. A new feature is screen memory dumping, which allows dumping of the 2KB of screen byte data. This can then be input directly into memory location #3000 (12288). I fed 27 frames of an Internet GIF through Aquarius Draw, dumped the screen memory of each frame, wrote a USB BASIC loop to load each one into screen memory sequentially. It doesn't consume any Aquarius RAM since these are external dumps loaded in on the fly. Some day I'll do a more proper video about Aquarius Draw, because it is really quite powerful as the most comprehensive tool for creating Aquarius artwork.
0:00 - Introduction and Prerequisites 1:25 - Cassette Bootstrapper for DOS Boot Disks 3:35 - Creating New Custom Disk Images 5:22 - Testing IBM Disk Drives for Compatibility 6:23 - Copying Necessary Files to IBM PC 7:44 - Writing New Disk via DOS Emulator 9:25 - Testing the New Floppy 10:07 - Final Tips and ConclusionCan Cheap UV Phone Sanitizers Erase EPROMs?Matt Pilz2022-01-27 | There has been a surge of UV sanitizers and phone cleaners hitting the market, often for $5-10. But, are they enough to erase EPROMs? - Blog version at mattpilz.com/uv-phone-sanitizers-erase-epromsTektronix 475 - Analog Oscilloscope Music (C. Allen | Globetrotter)Matt Pilz2021-11-09 | Just fixed up my 1972 Tektronix 475 and figured the coolest way to test it out was via C. Allen's amazing Globetrotter oscilloscope song. The entire music video seen on the oscilloscope's CRT is generated in real-time, using the soundwaves you hear. No pre-rendered graphics.
youtube.com/c/ChrisAllenMusicVHS RIP: Dell Inspiron 5000 Laptop Official Setup Video (2000)Matt Pilz2021-10-17 | This is a digitization of the VHS tape that came boxed with the Dell Inspiron 5000, which debuted in February 2000. The instructions cover unboxing, peripherals and OS setup using Windows 98.Quake Remastered (2021) but Demastered Back to 1977 (3 Inch CRT)Matt Pilz2021-10-10 | Test driving a mini 3" CRT from 1977 and the remastered version of Quake.Holiday Music Week: 1983 Mattel Aquarius (Internal and Micro Expander)Matt Pilz2020-12-31 | For fun as part of /r/RetroBattlestations "Holiday Music Week" - Exploring the sound of Mattel's short-lived 1983 home computer system. This demonstration uses both the base one-voice beeper (Jingle Bells) and the more common AY-3-8910 sound chip that was included in the "Micro Expander" and added 3 additional voices and a lot more musical capabilities - but is also much more complex to implement and requires use of Assembly / Machine Code (no BASIC syntax was included for it).Thank You for Buying Packard Bell (1992) 🚩🚩Matt Pilz2020-08-23 | While investigating what was consuming so much space on an original 1992 Packard Bell Legend 610, I came across this oddball AVI introducing Intel's then new line of video codecs. In the days of 60-200MB hard drives, this video consumed a sizable chunk of space at 10MB.5 Budget Computer Microphone Tests (ATR2100-USB, Logitech G930 & C920, Walmart Onn, Sony WH-CH700N)Matt Pilz2020-08-07 | 0:00 - Audio-Technica ATR2100-USB 1:30 - Logitech G930 Wireless Headphones 2:30 - Logitech HD 920 Webcam 4:00 - Walmart Onn. USB Podcast Microphone 100009002 5:30 - Sony WH-C700N Bluetooth Headphones
Raw OBS audio tests using five old and budget microphones I had on hand. Most of these can be found in stores or on eBay for $20-$60 these days. I include complete settings used for each, as a solid baseline to reduce background noise. The ATR2100 is recorded using USB plug-n-play for simplicity, but can achieve higher quality if fed into an audio interface and gain (e.g., Scarlett 1i1 & Cloudlifter).
All audio was encoded direct from OBS at 320 Kbps, using a single -30 dB suppression filter. The $25 Walmart Onn. Condenser Microphone is respectable if you need to pick up a greater distance, while the Audio-Technica ATR2100-USB Dynamic Microphone shines at close range with minimal noise. Your results may vary depending on your environment. But essentially low budget microphones are still perfectly adequate for common everyday use.
Audio-Technica ATR2100-USB [via USB plug-n-play] (MSRP: $60-80) - Recording Sound Level: 100% - OBS Mic Level: 0.0 dB - OBS Filter: Suppression -30 dB - Distance: 2” In Front-Right of Speaker (With Windscreen) - Format: 2 Channel 16-Bit 48000 Hz (DVD Quality)
Logitech G930 Wireless Headphones [via USB Dongle] (MSRP: $100) - Recording Sound Level: 85% - OBS Mic Level: -3.5 dB - OBS Filter: Suppression -30 dB - Distance: Attached Headphones - Format: 1 Channel 16-Bit 16000 Hz (Tape Recorder Quality)
Logitech HD 920 Webcam [via USB] (MSRP: $100) - Recording Sound Level: 90% - OBS Mic Level: -2.5 dB - OBS Filter: Suppression -30 dB - Distance: 36” In Front of Speaker - Format: 2 Channel 16-Bit 32000 Hz (FM Radio Quality)
Walmart Onn. USB Podcast Microphone 100009002 (MSRP: $24.88) - Recording Sound Level: 75% - OBS Mic Level: -3.5 dB - OBS Filter: Suppression -30 dB - Distance: 28” (Arm’s Length) Directly In Front of Speaker - Format: 2 Channel 24-Bit 48000 Hz (Studio Quality)
Sony WH-CH700N Hands-Free Bluetooth Headphones [via Bluetooth] (MSRP: $90) - Recording Sound Level: 75% - OBS Mic Level: -4.5 dB - OBS Filter: Suppression -30 dB - Distance: Attached Headphones - Format: 1 Channel 16-Bit 16000 Hz (Tape Recorder Quality)In humble B&W... Playing Cuphead on a 1950s Television (Level 1 Excerpts)Matt Pilz2020-07-31 | Probably one of the most faithful era-specific experiences of a modern game.Crash Test Dummies - What If God Was One Of Us (Joan Osborne Cover)Matt Pilz2020-03-10 | A "lost" cover by Brad Roberts of Joan Osborne's popular "One of Us" song. Eric Bazilian noted that he was channeling Brad Roberts when he initially recorded the song's demo, lyrically and vocally. The song is reminiscent of many tracks by Brad Roberts especially on the "God Shuffled His Feet" album. Shared per request by CTD...Mid-Century Gaming Noir: Playing Red Dead Redemption 2 (PC) on 1956 Admiral TVMatt Pilz2019-11-17 | Playing the new RDR2 (PC) opening travel gameplay on a restored 1956 Admiral television set. This TV is an original black-and-white 21" set and gives off a heavy noir vibe, which fits in excellently in this Western story.Tran-Siberian Orchestra 2019 Amazing TV Finale (Christmas / Sarajevo 12/24)Matt Pilz2019-11-15 | TSO has really upped the production value since I saw them 13 years ago! Bonus for including retro TVs into their songs.Easily Remove Adhesive & Thermal Labels from CardboardMatt Pilz2019-05-25 | This is the best way I've found to easily remove stuck adhesive from cardboard packaging without destroying the original material. Take a 750° heat gun and heat the entire surface evenly. Begin to peel a corner and then apply a little more heat. The labels should peel right off without affecting the original packaging! CAUTION - EXTREME HEAT. USE SPARINGLY. BE CAREFUL PULLING THE HOT LABEL OFF, OR USE GLOVES.How To Fix OBS Studio and ZoomIt for Screencasts (Double Cursor Bug)Matt Pilz2018-11-27 | Text Tuorial: http://mattpilz.com/how-to-fix-obs-studio-and-zoomit-for-screencasts-double-cursor-bug
If you've ever tried using OBS for screencasting along with a magnifying app like ZoomIt, you will have encountered the double cursor issue. Here's one way to fix it.The RF Ghost of Curtis Mathes (Prima Game Player Fake PSX)Matt Pilz2018-10-01 | Sometimes when connecting cheap game system knock-offs to older television sets, I have found that the signal can come in clear even without actually connecting the cables to anything. RF magic, or something of that sort.Decoding TV Source Code: IBM CloudMatt Pilz2018-09-29 | A lighthearted analysis and review of the sometimes not-so-legit source code seen on TV. This one comes from a popular IBM Cloud commercial.
A casual drawing app for iOS, Android and Amazon recently released as a test run. Free app includes 24 unique brushes, 24 shapes and 5 dynamically generated themes. It compliments my older Scribblify drawing app but in scratch art style.Guide: Fix Epson Scan Not Responding Windows 10 (2018) - V300 V600 V700Matt Pilz2018-06-15 | Intro: 0:00 to 0:46 Steps: 0:47 to 2:08 Addendum 1: 2:09 to 2:42 Addendum 2: 2:43 to 3:50
3/28 UPDATE: The second attempted campaign has now been canceled as well.
3/22 UPDATE: After canceling this campaign, the creator has now created a nearly identical campaign with the same flaws and copied content as before. He also claims Nintendo is on board with this project, but the only screenshot posted is the same canned "rejection" notice they send to other failed proposal requests.
Note: On some 440+ series and 640+ you can try an alternate combo: STOP + LEFT + DOWN + POWER. On 830 and other touch screen models you can try holding the TOP-RIGHT corner of touch screen and POWER button for 15-30 seconds until power light comes on.
A quick guide demonstrating how to downgrade your printer's firmware to fix "ink cartridge is not recognized" errors caused by printer companies attempting to block third party ink.
This video is for the Epson XP series of printers (300-630) but the same general approach can be applied to most printers. You just have to find out how to enter recovery mode and then find a copy of the older firmware to transfer.
NOTE: For XP-640 Epson has changed or removed the firmware upgrade method that worked on the XP-630. Instead try STOP + LEFT + DOWN + POWER to enter firmware update mode (white text).
You may also find WIC Utility of interest; the free version can query many printers to detect older firmware versions and list them for review, but to actually downgrade using this software instead of manually as described in this video costs $20 per reset.
Please like and subscribe if you enjoy this video or wish to support future tech-related videos on my channel. YouTube is restricting small YouTube creators with less than 1,000 subscribers so every sub is important. Thank you.Friday the 13th Beta Kill Switch (Chokehold Purgatory)Matt Pilz2016-12-26 | This is what happened when I (as Jason) grabbed a counselor by the neck at the same moment the Friday the 13th Beta servers officially shut-down. The counselor was locked in chokehold position and I could do nothing to release or terminate them. "This is my life now." -Counselor.From a Little SeedMatt Pilz2015-08-08 | An experimental sandbox simulation game I created on a whim. Grow procedurally generated trees.
Background Music: "The Snow Queen" (CC) by Kevin Macleod - http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100872Clip MontageMatt Pilz2015-02-15 | Some random excerpts of older videos uploaded here.Typing 110+ Words Per Minute the Wrong WayMatt Pilz2015-02-11 | Typing Site: http://typera.net - I don't type using the traditionally taught method on QWERTY keyboards. I do not use the standard home row, and I let my index and middle fingers do most of the work. I type much faster this way even if I've always been told it is the wrong way to type. :)Psychedelic Painter Tech Demo (October 2014)Matt Pilz2014-10-30 | This is a showcase of an app / tech demo I recently conceived and developed as part of a small challenge to showcase new and uncharted features of AGK V2. The app is cross-platform and works the same on Windows, Mac, Android and iOS including multitouch. "Become the next Pollock-inspired artist with this fun and messy drip art app!"
Music by TeknoAXE (Eight Bit Robot Dance) - http://teknoaxe.com/Link_Code_3.php?q=309Ballastic - Free Ultrabook Game for Windows 8 on AppUp (Ball and Elastic)Matt Pilz2012-12-04 | It starts simple enough. A small ball is attached to a thin elastic string. The objective is to carefully swing the ball around the screen while destroying and collecting a variety of items. If you aren't especially careful, the ball will stretch too far and the string will snap! The more items you destroy, the heavier the ball becomes. Rack up killer combos by collecting multiple items instantaneously. Local and online high score system included.
This game was developed for the Ultrabook™ as part of a short competition. The game features touch and mouse controls, light sensor adaption (day/night mode) and accelerometer for subtle background control. It is currently only for Windows 8 on Ultrabook™, but technically should work on Windows 7 desktop computers as well--an update will be released at a later time for greater compatibility.
Kevin MacLeod (incompetech.com) - "Aces High" Music ScoreGame Dev: Jetman Survival 01 - 2D Destructible Terrain Gone Wild (Millions of Pixels)Matt Pilz2012-06-14 | Watch in 1080p fullscreen for best image quality. Inspired by Jetmen Revival, Gravity Force and related titles, I began developing this new game. The video showcases the engine's current features, although bullet fire is difficult to see due to the way the video was captured and existing implementation of bullets.
Major features include: 100% destructible real-time terrain, fluid pixel particle system for thrust, destructible ships upon impact with hazards, classic Thrust-inspired movement, secondary fire capabilities, customized thrust and fire positions and amounts based on ship, easy to create maps and ships, background, middle, collision and foreground layers, 1920x1080 resolution with consistent 60+ FPS, even when the entire screen is filled with interactive pixels (see end of video).
This demo is based on DirectX, but I have also been working to port it to HTML5 and Objective C / OpenGL to create a more universally accessible end product. The idea is to ultimately develop local and Internet multiplayer support, many upgradeable weapons, achievements, and more.Little Eggy Game for iPhone and iPod Touch (App)Matt Pilz2012-03-26 | iTunes: http://itunes.apple.com/us/app/little-eggy/id486116783?ls=1&mt=8
Some raw gameplay footage of Little Eggy for iPhone and iPod Touch. This game stars the same characters as the PC 3D platformer but is a new casual action game. Apologies for the poor sound quality and stuttering video.Gish Challenge 2011: Level 8 - Race to the Finish - Objective #4 Custom Map!Matt Pilz2011-04-30 | This is the eighth and final challenge for the April 2011 Gish competition! Like last time, entrants could complete the objectives using either the original factory7 level or the easier meltdown version with no hot pipes. New to this level is the challenge of creating a custom version with new obstacles to play through. In attempts of ending strong, I decided to have a go at objective #4 ("Use the level editor to modify and create your own obstacles for this level and play through it"). I learned an awful lot from this experience, as detailed below!
I never used the Gish level editor until this competition, but after hours and hours of trial and failure I'd consider myself quite proficient by now! Sadly, this is the third completely redone custom version of this map. The first one got lost when I opened up the default map to test a feature without saving my modified map first; the backup level file would then only load the default editor map. The second version got lost when I hit F9 instead of F7 to load it back into the editor. Of course with each redo I learned a lot more about the awesomeness and the limitations of the editor.
So, the custom version of factory8 that I created is absolutely the most difficult Gish level I've ever played and likely the most difficult level I've ever played on any game. I took an already difficult level and increased its difficulty by an epic amount. Many more hot pipes, enemies, obstacles and traps, and most importantly spikes! The spikes will result in pretty much instant death in my map! I'm surprised that I was able to beat this map myself after much practice, and I only did it once.
If you can survive the first couple seconds of the map let alone get to the end you are a true Gish/Brea hero! EllipticGeometry has posted a run-through of the original if you'd like to see how that version compares to my own.
After spending such a long time trying to get different features to work right in my custom level, I have amazing respect for the map designer(s) as maps certainly aren't easy to develop especially to the complexity that the official Gish levels are.
---
The developers of my favorite Indy game, Gish, are holding contests all this month as they unveil some challenging new levels for the game. If you can complete the level challenges and/or follow them on Facebook/YouTube, you have a chance of winning a GameCom 777 headset!
P.S., Chronic Logic has a special now where you can buy Gish for whatever you think it's worth!
Level 8 - "Race to the Finish"Gish Challenge 2011: Level 7 - Im sure shell understand... - Objective #6 Factory7Matt Pilz2011-04-27 | This is the seventh challenge for the April 2011 Gish competition. This time, the developer offered a list of seven possible challenges we could complete in either the original factory7 level or the easier meltdown version with no hot pipes (credit to EllipticGeometry for unlocking the Meltdown bonus levels). I decided to have a go at the original Factory7 level and primarily took on objectives #5 and #6 ("Claim the Plantronics' Secret Prize Box" and "Complete this level using the alternative route"). Make no mistake about it, this level was arguably the hardest of any game I've ever played! I messed up towards the end a little in this capture but it was the first video of me successfully completing the level via the alternate path.
The developers of my favorite Indy game, Gish, are holding contests all this month as they unveil some challenging new levels for the game. If you can complete the level challenges and/or follow them on Facebook/YouTube, you have a chance of winning a GameCom 777 headset!
P.S., Chronic Logic has a special now where you can buy Gish for whatever you think it's worth!
Level 7 - "I'm sure she'll understand..."Gish Challenge 2011: Level 6 - Gish Launcher - Objective #5Matt Pilz2011-04-25 | This is the sixth challenge for the April 2011 Gish competition. This time, the developer offered a list of six possible challenges we could complete. I completed objective #5 ("Find the hidden Plantronics Prize Box"). I'm very late into this challenge.
The developers of my favorite Indy game, Gish, are holding contests all this month as they unveil some challenging new levels for the game. If you can complete the level challenges and/or follow them on Facebook/YouTube, you have a chance of winning a GameCom 777 headset!
P.S., Chronic Logic has a special now where you can buy Gish for whatever you think it's worth!
Level 6 - "Gish Launcher"Gish Challenge 2011: Level 5 - Not exactly a Lamborghini Gallardo... - Objective #7-8Matt Pilz2011-04-20 | This is the fifth challenge for the April 2011 Gish competition. This time, the developer offered a list of eight possible challenges we could complete ranging from easy to difficult. I completed objective #7 ("Find the hidden Plantronics Prize Box...") and at the same time also completed objective #8 ("Complete this level in less than 55 game seconds.") My final time was 0:28 (or 0:36 in-game time), though it was tough! Since each video counts as a single completed challenge, this one will be for #8.
The developers of my favorite Indy game, Gish, are holding contests all this month as they unveil some challenging new levels for the game. If you can complete the level challenges and/or follow them on Facebook/YouTube, you have a chance of winning a GameCom 777 headset!
P.S., Chronic Logic has a special now where you can buy Gish for whatever you think it's worth!
Level 5 - "Not exactly a Lamborghini Gallardo..."Gish Challenge 2011: Level 4 - Follow that Train - Objective #1Matt Pilz2011-04-16 | This is the fourth challenge for the April 2011 Gish competition. As was the case in the third challenge, the developer gave a list of possible challenges we could complete. I had previously recorded objective #3 ("Find the room with the giant ball") but then saw it had already been done so I recorded objective #1 ("Complete this level keeping the cart on the main path") instead. Much of the time spent on this challenge was waiting for the cart to catch up.
The developers of my favorite Indy game, Gish, are holding contests all this month as they unveil some challenging new levels for the game. If you can complete the level challenges and/or follow them on Facebook/YouTube, you have a chance of winning a GameCom 777 headset!
P.S., Chronic Logic has a special now where you can buy Gish for whatever you think it's worth!
Level 4 - "Follow that 'Train'"Gish Challenge 2011: Level 4 - Follow that Train - Objective #3Matt Pilz2011-04-16 | This is the fourth challenge for the April 2011 Gish competition. As was the case in the third challenge, the developer gave a list of possible challenges we could complete. I decided to record objective #3 which was "Find the room with the giant ball." This is another very short competition video.
The developers of my favorite Indy game, Gish, are holding contests all this month as they unveil some challenging new levels for the game. If you can complete the level challenges and/or follow them on Facebook/YouTube, you have a chance of winning a GameCom 777 headset!
P.S., Chronic Logic has a special now where you can buy Gish for whatever you think it's worth!
Level 4 - "Follow that 'Train'"Gish Challenge 2011: Level 3 - Brea?? - Objective #2Matt Pilz2011-04-13 | This is the third challenge for the April 2011 Gish competition. This time, the developer gave a list of possible challenges we could complete. I decided to record objective #2 which was "Throw something to the bottom of the well and record what happens." Evil, evil monster! This is a short and sweet competition video. I also discovered the secret switch but wasn't sure what it triggered. The level is very fun when played all the way through, too. Sorry for the harsh video contrast in this one.
The developers of my favorite Indy game, Gish, are holding contests all this month as they unveil some challenging new levels for the game. If you can complete the level challenges and/or follow them on Facebook/YouTube, you have a chance of winning a GameCom 777 headset!
P.S., Chronic Logic has a special now where you can buy Gish for whatever you think it's worth!
Level 3 - "Brea??"Gish Challenge 2011: Level 2 - Gears, Gears, and Really Hot Pipes!Matt Pilz2011-04-09 | This is the second challenge for the April 2011 Gish competition. The objective was to beat the level in under seven minutes with a score of 20,000 or higher. I beat the map in just under three minutes (or 3:54 if going by the in-game timer which counts faster). My final score was 20,890 and I reached the end with 3 health to spare! Figuring out all of the paths for points was difficult by itself; trying to actually complete the map without dying in any number of ways was terribly stressful. But I feel this was a pretty good run.
The developers of my favorite Indy game, Gish, are holding contests all this month as they unveil some challenging new levels for the game. If you can complete the level challenges and/or follow them on Facebook/YouTube, you have a chance of winning a GameCom 777 headset!
P.S., Chronic Logic has a special now where you can buy Gish for whatever you think it's worth!
Developed for Caiman's 2006 "Total Packaging Supplier" competition, the objective was to create a game involving packaging machines. I decided to bsae my game on the classic, Klax.
In the game, you have to create packages of matching colors (3 or more per package) as they move down the conveyor belt. This version features power-ups and hazards, a multitude of different colored blocks (depending on how far you get) and more.
Packin' Plax placed 2nd in the competition (0.1 points away from 1st) and was named the "Freeware Game of the Month" in January 2007's PC Zone magazine!Bombzuka Bombuzal Remake Action Puzzle Game Raw FootageMatt Pilz2007-05-26 | As part of the 2006 Retro-Remakes gaming competition, I remade the very challenging action puzzle game Bombuzal, which was originally released about 30 years ago on a variety of platforms.
My remake is very faithful to the original, but has been completely redone in rich 3D with a multitude of new options and accessibility modes available. All 130 levels are included!