Uploaded April 2025 | Updated September 2026, 2 weeks ago
In this video, I share the latest update on building my Sovol SV08 tool changer using the Spartacus Toolhead. Brought to you by Sovol. Check them out at jle.vi/sovol
You asked (again and again)... and now it’s finally here:
A real update on my Ultimate Sovol SV08 Tool changer project—with actual progress to show for it!
In this video, I’m diving into all the highs, lows, facepalms, and hard-earned lessons from this insane build. From hardware hiccups to design disasters, I’ve hit just about every bump in the road so you don’t have to.
If you’ve ever thought about tackling your own multi-tool 3D printer setup or just want to see what it really takes to push the Sovol SV08 to its limits, this one’s for you. Oh, and PLEASE... don't ask me in the comments "Why not wait for the Bondtech INDX?" - it's a sore subject.
🤫 Get my custom filament and printer profiles, buyers guides, and much, much more on Patreon: patreon.com/thenextlayer
💬 JOIN MY DISCORD: jle.vi/tnl-discord
🎥 IN THIS VIDEO: 🎥
00:00 Introduction
00:45 Where We Left Off
03:17 Firmware Hassles
05:08 Missing Hardware & Endless Delays
07:38 Starting From Scratch
08:19 Rail & Carriage Catastrophe
12:53 A New Hope
15:36 Next Steps
🔗 LINKS MENTIONED IN THE VIDEO: 🔗
👉 Support Nadir of CN3D on YouTube (Spartacus Toolhead Creator): youtube.com/channel/UC5lzueDDE7wtiaKgIaUr_Iw and on Printables: printables.com/@Nadir
👉 My previous video on the SV08 Toolchanger: youtu.be/cJW3B18tEUM
👉 Playlist of my SV08 Toolchanger Build Series: youtube.com/playlist?list=PLNAIMkOXd_V9jdPlKDvLn1b1i14LN-vcy
👉 Playlist of my ERCF V2 Build Series: youtube.com/playlist?list=PLNAIMkOXd_V8UITY13F497-lr_v0yXx3x
👉 My previous video on the Box Turtle AMS Build: youtu.be/priaWY5iQJE
👉 Draft Shift Design (StealthChanger Team): github.com/DraftShift
👉 BondTech INDX: youtube.com/watch?v=BCmGoP0uNlM
THANK YOU TO THIS PROJECT's SPONSORS 🙏🏼
🙏🏼 Sovol SV08: jle.vi/sovol
🙏🏼 CN3D, Creators of the Spartacus Toolhead: printables.com/@Nadir
🙏🏼 LDO Motors: Available @ jle.vi/kb3d & jle.vi/west3d
🙏🏼 Polymaker: jle.vi/polymaker
🙏🏼 Slice Engineering: jle.vi/slice
🙏🏼 Wham Bam: jle.vi/whambam
🙏🏼 E3D: jle.vi/e3d
🙏🏼 FYSETC: jle.vi/fysetc
🙏🏼 Phaetus: phaetus3d.com
🙏🏼 BondTech: https://bondtech.se
🙏🏼 Ember Prototypes: emberprototypes.com
🙏🏼 DropEffect: dropeffect.com
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printing "accessory": jle.vi/magigoo | jle.vi/whambam
📍 Check out the official TNL merch: shop.thenextlayer.com
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: jle.vi/links
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter
In this video, I share the latest update on building my Sovol SV08 tool changer using the Spartacus Toolhead. Brought to you by Sovol. Check them out at jle.vi/sovol
You asked (again and again)... and now it’s finally here:
A real update on my Ultimate Sovol SV08 Tool changer project—with actual progress to show for it!
In this video, I’m diving into all the highs, lows, facepalms, and hard-earned lessons from this insane build. From hardware hiccups to design disasters, I’ve hit just about every bump in the road so you don’t have to.
If you’ve ever thought about tackling your own multi-tool 3D printer setup or just want to see what it really takes to push the Sovol SV08 to its limits, this one’s for you. Oh, and PLEASE... don't ask me in the comments "Why not wait for the Bondtech INDX?" - it's a sore subject.
🤫 Get my custom filament and printer profiles, buyers guides, and much, much more on Patreon: patreon.com/thenextlayer
💬 JOIN MY DISCORD: jle.vi/tnl-discord
🎥 IN THIS VIDEO: 🎥
00:00 Introduction
00:45 Where We Left Off
03:17 Firmware Hassles
05:08 Missing Hardware & Endless Delays
07:38 Starting From Scratch
08:19 Rail & Carriage Catastrophe
12:53 A New Hope
15:36 Next Steps
🔗 LINKS MENTIONED IN THE VIDEO: 🔗
👉 Support Nadir of CN3D on YouTube (Spartacus Toolhead Creator): youtube.com/channel/UC5lzueDDE7wtiaKgIaUr_Iw and on Printables: printables.com/@Nadir
👉 My previous video on the SV08 Toolchanger: youtu.be/cJW3B18tEUM
👉 Playlist of my SV08 Toolchanger Build Series: youtube.com/playlist?list=PLNAIMkOXd_V9jdPlKDvLn1b1i14LN-vcy
👉 Playlist of my ERCF V2 Build Series: youtube.com/playlist?list=PLNAIMkOXd_V8UITY13F497-lr_v0yXx3x
👉 My previous video on the Box Turtle AMS Build: youtu.be/priaWY5iQJE
👉 Draft Shift Design (StealthChanger Team): github.com/DraftShift
👉 BondTech INDX: youtube.com/watch?v=BCmGoP0uNlM
THANK YOU TO THIS PROJECT's SPONSORS 🙏🏼
🙏🏼 Sovol SV08: jle.vi/sovol
🙏🏼 CN3D, Creators of the Spartacus Toolhead: printables.com/@Nadir
🙏🏼 LDO Motors: Available @ jle.vi/kb3d & jle.vi/west3d
🙏🏼 Polymaker: jle.vi/polymaker
🙏🏼 Slice Engineering: jle.vi/slice
🙏🏼 Wham Bam: jle.vi/whambam
🙏🏼 E3D: jle.vi/e3d
🙏🏼 FYSETC: jle.vi/fysetc
🙏🏼 Phaetus: phaetus3d.com
🙏🏼 BondTech: https://bondtech.se
🙏🏼 Ember Prototypes: emberprototypes.com
🙏🏼 DropEffect: dropeffect.com
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printing "accessory": jle.vi/magigoo | jle.vi/whambam
📍 Check out the official TNL merch: shop.thenextlayer.com
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: jle.vi/links
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter
