Uploaded January 2016 | Updated September 2026, 2 weeks ago
#drywall #ownerbuilder #diyforknuckleheads
diyforknuckleheads.com G'day Knuckleheads. In this Plastering / Drywalling Episode we look at taping and setting the wall and ceiling joins along with installing the Cornice / Crown Molding. To tape and set my joins, the boys used Gyprock Basecoat to bed in the paper tape and then topped the join with Gyprocks top of the line Ultra AP all purpose compound. For the cornice l used a profile called 'Alto' which is also available from CSR Gyprock. Here's the link to their website where you can download the installation booklets if you want to have a go yourself.
Link to CSR Gyprock:
http://www.gyprock.com.au/Pages/For-Homeowners.aspx?pref=1
The setting of the joins and the cornice finished off the job nicely! It was a major milestone in the build.
Check it out and let me know what you think!
Before l go on...
DIY For Knuckleheads Website: diyforknuckleheads.com
-------------
SUBSCRIBE to DIY For Knuckleheads and never miss a video again!
youtube.com/user/shaneconlan1
-------------
Tools l Use: diyforknuckleheads.com/tools-resources
-------------
Mailing Address:
DIY For Knuckleheads
P.O. Box 152
Sawtell,
NSW, 2452
Australia.
-------------
Check out the Latest Swag from our New DIY For Knuckleheads Clothing and Accessorie Store!
https://shop.spreadshirt.com.au/DIYForKnuckleheads/
------------
Check us out on Facebook;
facebook.com/DiyForKnuckleheads
------------
ATTENTION!!
Don’t Miss Out on ALL the other Good Stuff!
Click on the Link below for the Playlist containing all the HELPFUL, INFORMATION PACKED Videos in My Owner Builder Series.
youtube.com/watch?v=vI13AjH6gQw&list=PLt-izwHO5Muk_unwubBySa7TTxImdAL-T
Music supplied by Jason Shaw at audionautix.com
Released under Creative Commons License 3.0.
Music Title: Banjo Short.
Kevin Mcleod:
Released under Creative Commons License 3.0.
Music Title: Feeling Good.
Have a great day and l’ll see you again real soon. ☺
Cheers,
Uncle Knackers
Please Note:
All Videos produced by shaneconlan1's YouTube Channel are provided for informational purposes only.
All the content provided is for general guidance only. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, shaneconlan1 ( Shane Conlan) cannot, and does not assume any responsibility or liability for the accuracy of the information contained therein. Further, shaneconlan1 (Shane Conlan) will not accept any claim for liability related to, but not limited to, omissions, errors, injury, damage or the outcome of any project. It is the responsibility of the viewer to ensure compliance with all applicable laws, rules, codes and regulations for a project. The viewer must always take proper safety precautions and exercise caution when taking on any project. If there are any questions or doubt in regards to the element of a project, please consult with a licensed professional.
#drywall #ownerbuilder #diyforknuckleheads
diyforknuckleheads.com G'day Knuckleheads. In this Plastering / Drywalling Episode we look at taping and setting the wall and ceiling joins along with installing the Cornice / Crown Molding. To tape and set my joins, the boys used Gyprock Basecoat to bed in the paper tape and then topped the join with Gyprocks top of the line Ultra AP all purpose compound. For the cornice l used a profile called 'Alto' which is also available from CSR Gyprock. Here's the link to their website where you can download the installation booklets if you want to have a go yourself.
Link to CSR Gyprock:
http://www.gyprock.com.au/Pages/For-Homeowners.aspx?pref=1
The setting of the joins and the cornice finished off the job nicely! It was a major milestone in the build.
Check it out and let me know what you think!
Before l go on...
DIY For Knuckleheads Website: diyforknuckleheads.com
-------------
SUBSCRIBE to DIY For Knuckleheads and never miss a video again!
youtube.com/user/shaneconlan1
-------------
Tools l Use: diyforknuckleheads.com/tools-resources
-------------
Mailing Address:
DIY For Knuckleheads
P.O. Box 152
Sawtell,
NSW, 2452
Australia.
-------------
Check out the Latest Swag from our New DIY For Knuckleheads Clothing and Accessorie Store!
https://shop.spreadshirt.com.au/DIYForKnuckleheads/
------------
Check us out on Facebook;
facebook.com/DiyForKnuckleheads
------------
ATTENTION!!
Don’t Miss Out on ALL the other Good Stuff!
Click on the Link below for the Playlist containing all the HELPFUL, INFORMATION PACKED Videos in My Owner Builder Series.
youtube.com/watch?v=vI13AjH6gQw&list=PLt-izwHO5Muk_unwubBySa7TTxImdAL-T
Music supplied by Jason Shaw at audionautix.com
Released under Creative Commons License 3.0.
Music Title: Banjo Short.
Kevin Mcleod:
Released under Creative Commons License 3.0.
Music Title: Feeling Good.
Have a great day and l’ll see you again real soon. ☺
Cheers,
Uncle Knackers
Please Note:
All Videos produced by shaneconlan1's YouTube Channel are provided for informational purposes only.
All the content provided is for general guidance only. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, shaneconlan1 ( Shane Conlan) cannot, and does not assume any responsibility or liability for the accuracy of the information contained therein. Further, shaneconlan1 (Shane Conlan) will not accept any claim for liability related to, but not limited to, omissions, errors, injury, damage or the outcome of any project. It is the responsibility of the viewer to ensure compliance with all applicable laws, rules, codes and regulations for a project. The viewer must always take proper safety precautions and exercise caution when taking on any project. If there are any questions or doubt in regards to the element of a project, please consult with a licensed professional.
