Uploaded October 2025 | Updated September 2026, 1 week ago
Get 40% off your first Hungryroot box PLUS get a free item of your choice in every box for life with code ROYALTYSOAPS at bit.ly/3QuvEFq
------------------------
This post contains affiliate links
------------------------
Fragrance & Colorants
• Fragrance Oil Calculator - bit.ly/4ocExD1
• Wildwood Retreat Fragrance Oil Collection - bit.ly/3LrVn1Y
• Copper Sparkle Mica - bit.ly/4qAGT07
• Hunter Green Mica - bit.ly/47uBDT3
• Sage Green Mica - bit.ly/3WUHUlM
• All Makesy Micas (including Gunmetal & Sky Blue) - bit.ly/48J4yVy
Goat Milk M&P base
• Bramble Berry SFIC Goat Milk Melt & Pour Base - bit.ly/3JgH2F8
• WSP Goat Milk M&P Soap Base - bit.ly/4oaguEM
• Amazon Stainless Steel Crinkle/Wavy Soap Cutter -
• Amazon 91% Isopropyl Alcohol (spritz to pop bubbles & “glue” layers/embeds as in your video, can also buy at grocery store!) -
Scale (Amazon, Makesy, Bramble Berry)
• Amazon - My Weigh KD-8000 - bit.ly/3J5RmzL
• Makesy Digital Scale - bit.ly/3J5RmzL
• Bramble Berry Perfect Scale - bit.ly/3JmUyae
Glass Beaker (Amazon)
• Amazon Karter Scientific 250 mL borosilicate beaker - amzn.to/3WonBx2
Silicone “viral soap” slab/tray mold
• Etsy (lots of options, here's one) - bit.ly/3WozPpy
• Nature’s Garden Large Silicone Tray Mold - bit.ly/3Lm01LN
Pitcher (Dollar Tree)
• Dollar Tree Pitchers - bit.ly/3JtqPwk
• Clear Smaller Dollar Tree Pitchers - bit.ly/43uh0VC
Misc Tools
• Amazon Stainless Steel Crinkle/Wavy Soap Cutter - amzn.to/4qu7H1O
• Amazon 91% Isopropyl Alcohol (spritz to pop bubbles & “glue” layers/embeds as in your video, can also buy at grocery store!) - amzn.to/49myO8V
------------------------
1) Hickory & Suede : Yield = 12 bars, each ≥4 oz.
1.65 oz (46.8 g) Hickory & Suede Fragrance Oil 1.65 oz
1 tsp copper sparkle mica
0.5 tsp coconut husk powder
55 oz total MP base = 27.5 oz Triple Butter + 27.5 oz Goat Milk
Instructions
1. Cut soap base into cubes, melt in a 60 oz pitcher in microwave in 30-sec bursts until fully melted (about 150–160°F).
2. Cool to ~120°F. Add 1.65 oz FO; stir 30–60 sec.
3. Stir in mica and coconut shell powder 60–120 sec to fully suspend.
4. Pour 90–95% of the batch into the slab mold. Spritz surface with alcohol. Let set until firm but still slightly pliable (45–60 min).
5. Re-warm the reserved 5–10% to 100–115°F. Spritz the slab heavily with alcohol and pour the thin glue layer.
6. Immediately place stone embeds; spritz again.
7. Let sit for 60 minutes.
8. Unmold, mark 3.3″ and cute the square into 3 long strips. Then wavy-cut the bars and short ends for the TikTok edge on all bars!
------------------------
Cypress & Cashmere : Yield = 12 bars, each ≥4 oz.
0.8 oz (22.7 g) Cypress & Cashmere Fragrance Oil — bottom layer
0.8 oz (22.7 g) Cypress & Cashmere Fragrance Oil — top layer
¼ tsp Hunter Green mica (pre-disperse in FO) — bottom
(optional) light sage-green mica dusting — top
27.5 oz clear MP base — bottom layer
27.5 oz white MP base — top layer
Instructions
1. Melt 27.5 oz clear MP in a 60 oz pitcher (30-sec bursts) until fully melted (150–160°F).
2. Cool to 140°F. Stir in 0.8 oz FO pre-mixed with ¼ tsp Hunter Green mica; blend 30–60 sec.
3. Pour into the slab mold; spritz surface with alcohol. Let set until firm/springy (60min).
4. Heavily spritz the set surface with alcohol (it should look glossy).
5. Melt 27.5 oz white MP; cool to 130°F. Stir in 0.8 oz FO; pour gently over the bottom layer. Spritz the surface.
6. Lightly dust the warm top with sage-green mica (optional).
7. Quickly place evergreen tree embeds; spritz again.
8. Let sit 60 minutes.
9. Unmold, mark 3.3″ and cut the slab into 3 long strips. Then wavy-cut the bars and short ends for the TikTok edge.
-----------------------
River Birch & Stone : Yield = 12 bars, each ≥4 oz.
1.2 oz (34.0 g) River Birch & Stone Fragrance Oil — blue base
0.45 oz (12.8 g) River Birch & Stone Fragrance Oil — stripe layer
1 tsp Sky Blue mica — base
¼ tsp Gunmetal mica — stripe cup A (cup B stays white)
Total MP base = 55 oz → 40 oz base layer + 15 oz stripe layer
Instructions
1. Base layer: Melt 40 oz MP; cool to 120–125°F. Stir in 1.2 oz FO and 1 tsp Sky Blue mica (pre-disperse if desired). Spritz bubbles, pour into slab, spritz top, and let set 30–60 min until firm.
2. Stripe layer prep: Melt 15 oz MP; cool to ~120°F. Stir in 0.45 oz FO. Split evenly into two cups (~7.5 oz each). Tint Cup A with ¼ tsp Gunmetal mica; leave Cup B white.
3. Heavily spritz the blue base with alcohol until glossy.
4. Pour loose alternating stripes of gray and white across the surface to mimic birch; top off gaps as needed. Spritz to pop bubbles.
5. Let sit 30 min.
6. Unmold, mark 3.3″ and cut the slab into 3 long strips. Then wavy-cut the bars and short ends for the TikTok edge.
Get 40% off your first Hungryroot box PLUS get a free item of your choice in every box for life with code ROYALTYSOAPS at bit.ly/3QuvEFq
------------------------
This post contains affiliate links
------------------------
Fragrance & Colorants
• Fragrance Oil Calculator - bit.ly/4ocExD1
• Wildwood Retreat Fragrance Oil Collection - bit.ly/3LrVn1Y
• Copper Sparkle Mica - bit.ly/4qAGT07
• Hunter Green Mica - bit.ly/47uBDT3
• Sage Green Mica - bit.ly/3WUHUlM
• All Makesy Micas (including Gunmetal & Sky Blue) - bit.ly/48J4yVy
Goat Milk M&P base
• Bramble Berry SFIC Goat Milk Melt & Pour Base - bit.ly/3JgH2F8
• WSP Goat Milk M&P Soap Base - bit.ly/4oaguEM
• Amazon Stainless Steel Crinkle/Wavy Soap Cutter -
• Amazon 91% Isopropyl Alcohol (spritz to pop bubbles & “glue” layers/embeds as in your video, can also buy at grocery store!) -
Scale (Amazon, Makesy, Bramble Berry)
• Amazon - My Weigh KD-8000 - bit.ly/3J5RmzL
• Makesy Digital Scale - bit.ly/3J5RmzL
• Bramble Berry Perfect Scale - bit.ly/3JmUyae
Glass Beaker (Amazon)
• Amazon Karter Scientific 250 mL borosilicate beaker - amzn.to/3WonBx2
Silicone “viral soap” slab/tray mold
• Etsy (lots of options, here's one) - bit.ly/3WozPpy
• Nature’s Garden Large Silicone Tray Mold - bit.ly/3Lm01LN
Pitcher (Dollar Tree)
• Dollar Tree Pitchers - bit.ly/3JtqPwk
• Clear Smaller Dollar Tree Pitchers - bit.ly/43uh0VC
Misc Tools
• Amazon Stainless Steel Crinkle/Wavy Soap Cutter - amzn.to/4qu7H1O
• Amazon 91% Isopropyl Alcohol (spritz to pop bubbles & “glue” layers/embeds as in your video, can also buy at grocery store!) - amzn.to/49myO8V
------------------------
1) Hickory & Suede : Yield = 12 bars, each ≥4 oz.
1.65 oz (46.8 g) Hickory & Suede Fragrance Oil 1.65 oz
1 tsp copper sparkle mica
0.5 tsp coconut husk powder
55 oz total MP base = 27.5 oz Triple Butter + 27.5 oz Goat Milk
Instructions
1. Cut soap base into cubes, melt in a 60 oz pitcher in microwave in 30-sec bursts until fully melted (about 150–160°F).
2. Cool to ~120°F. Add 1.65 oz FO; stir 30–60 sec.
3. Stir in mica and coconut shell powder 60–120 sec to fully suspend.
4. Pour 90–95% of the batch into the slab mold. Spritz surface with alcohol. Let set until firm but still slightly pliable (45–60 min).
5. Re-warm the reserved 5–10% to 100–115°F. Spritz the slab heavily with alcohol and pour the thin glue layer.
6. Immediately place stone embeds; spritz again.
7. Let sit for 60 minutes.
8. Unmold, mark 3.3″ and cute the square into 3 long strips. Then wavy-cut the bars and short ends for the TikTok edge on all bars!
------------------------
Cypress & Cashmere : Yield = 12 bars, each ≥4 oz.
0.8 oz (22.7 g) Cypress & Cashmere Fragrance Oil — bottom layer
0.8 oz (22.7 g) Cypress & Cashmere Fragrance Oil — top layer
¼ tsp Hunter Green mica (pre-disperse in FO) — bottom
(optional) light sage-green mica dusting — top
27.5 oz clear MP base — bottom layer
27.5 oz white MP base — top layer
Instructions
1. Melt 27.5 oz clear MP in a 60 oz pitcher (30-sec bursts) until fully melted (150–160°F).
2. Cool to 140°F. Stir in 0.8 oz FO pre-mixed with ¼ tsp Hunter Green mica; blend 30–60 sec.
3. Pour into the slab mold; spritz surface with alcohol. Let set until firm/springy (60min).
4. Heavily spritz the set surface with alcohol (it should look glossy).
5. Melt 27.5 oz white MP; cool to 130°F. Stir in 0.8 oz FO; pour gently over the bottom layer. Spritz the surface.
6. Lightly dust the warm top with sage-green mica (optional).
7. Quickly place evergreen tree embeds; spritz again.
8. Let sit 60 minutes.
9. Unmold, mark 3.3″ and cut the slab into 3 long strips. Then wavy-cut the bars and short ends for the TikTok edge.
-----------------------
River Birch & Stone : Yield = 12 bars, each ≥4 oz.
1.2 oz (34.0 g) River Birch & Stone Fragrance Oil — blue base
0.45 oz (12.8 g) River Birch & Stone Fragrance Oil — stripe layer
1 tsp Sky Blue mica — base
¼ tsp Gunmetal mica — stripe cup A (cup B stays white)
Total MP base = 55 oz → 40 oz base layer + 15 oz stripe layer
Instructions
1. Base layer: Melt 40 oz MP; cool to 120–125°F. Stir in 1.2 oz FO and 1 tsp Sky Blue mica (pre-disperse if desired). Spritz bubbles, pour into slab, spritz top, and let set 30–60 min until firm.
2. Stripe layer prep: Melt 15 oz MP; cool to ~120°F. Stir in 0.45 oz FO. Split evenly into two cups (~7.5 oz each). Tint Cup A with ¼ tsp Gunmetal mica; leave Cup B white.
3. Heavily spritz the blue base with alcohol until glossy.
4. Pour loose alternating stripes of gray and white across the surface to mimic birch; top off gaps as needed. Spritz to pop bubbles.
5. Let sit 30 min.
6. Unmold, mark 3.3″ and cut the slab into 3 long strips. Then wavy-cut the bars and short ends for the TikTok edge.
