David Wood (dwuk3d)
SV08 H2D X1C full speed
updated
With two PTFE placement options show.
Also for an illustration of a fully enclosed SV08 INDX - see this video
youtu.be/7MPa1tk-rNc
Animations created in Blender
CAD created in Fusion 360 - as rough approximations from the Bondtech Promo Video's
Thabto - Three Heads are Better Than One..
Thanks to @digital0785 for the name inspiration.
More work required on alignment and speeds - but basic 3 headed printer working.
00:00 Intro
00:13 Alignment 10x Speed
00:40 Print 10x Speed
01:26 Alignment real time
06:23 Print - real time
06:43 First tool change.
07:47 Second Tool change
10:11 Third Tool Change
11:01 Forth Tool change
Rear print heads single colour IDEX
Front print head will be Bondtech INDX at least 9 colours
See here for background info
forum.duet3d.com/post/349140
Required RRF firmware for parallel movements.
Tool changes possible in less than one second - vs at least 10 seconds for other tool changers.
See here for comparison and further background info
forum.duet3d.com/post/353978
See Duet3d forum for background info
forum.duet3d.com/post/349140
Using Duet3d RRF - Multiple Motion System on 2 gantries.
Aim is to synchronise colour changes down to sub second.
For background info see
forum.duet3d.com/post/353818
https://www.bondtech.se/indx-by-bondtech/
Might be a solution for taking my SV08 upgrade beyond 4 colours - would remove the need for having both and tool changer and AMS type multiplexer.
See here for background info on my SV08 parallel printer
forum.duet3d.com/topic/37250/sovol-sv08-multiple-motion-system-upgrade
Update - projected prices now out - and I think if I only upgrade one print head per gantry to INDX then it could fit within my target budget.
INDX tool change is about 17 seconds in total including reheat and priming - impressive.
XL based on PrusaSlicer about 14 seconds (3 secs quicker).
Doing the same thing with Bambu Studio and an H2D - Intra Nozzle total change times seem to be estimated at 11.7 seconds (about 5.3 secs quicker). IDEX times likely to be similar
If you move all swaps to the same Nozzle then Bambu Studio estimates 76secs for a normal Multiplexing filament change.
Doing the same thing for an X1C comes out as 95 seconds per change -
An MK4 with MMU3 using the same method is estimating at 67 seconds per change.
Dual Gantry parallel INDX or Stealtchanger tool changes could be as quick as sub-second - and faster than Ratrig toolshift..
Parallel printing could then reduce single colour printing by appx 40% on dual gantry for some larger models, and by over 70% for symmetrical models on quad head printer.
See here for background info
forum.duet3d.com/post/349140
The plan is to add two further IDEX print heads, and also a tool changer capability.
See other videos in this series or this forum thread for background info.
forum.duet3d.com/post/349140
Music by Cavallo Pazzo
The plan is to add two further IDEX print heads, and also a tool changer capability.
See other videos in this series or this forum thread for background info.
forum.duet3d.com/post/349140
00:00 Intro
00:48 Demo Video
02:30 Results
Music by Cavallo Pazzo
Looks promising though.
Priming and parking etc needs work
Update - found the issue - needed to add an M606 S1 command to the Gcode file - see next video for demo
Not quite ready to print yet due to an issue with layer synchronisation.
But still nice to see both heads in motion at the same time.
Need to resolve this before I do some proper print tests
With 2nd gantry having servo based Z height adjustment
Running quite slow for some reason - single extruder tests a lot faster
See Duet3d forum or other videos for background
forum.duet3d.com/post/349140
Final aim is for a Dual Gantry, Dual IDEX parallel printing machine
See here for more details forum.duet3d.com/topic/37250/sovol-sv08-multiple-motion-system-upgrade
Just tested that the first gantry still works - despite belt re-routing - and adding a 2nd CoreXY set of belts inside the original setup.
See here for background info.
forum.duet3d.com/post/349140
Similar to the @NathanBuildsRobots Quad Printer
00:00 Into
00:10 Test print1 - with outer wall not segmented
14:10 Test print2 - with segments offset each layer and outer wall segmented
Using a Sovol SV08 for illustration purposes.
See other videos in this series or this forum thread for background info.
forum.duet3d.com/post/348851
00:00 Intro
00:05 Double Gantry
00:20 IDEX
00:47 Advanced IDEX
01:21 Tool Changer
02:12 AMS/MMU
03:12 Larger moving build plate
04:01 Revolutionary Mode
Refer here for original Properprinting video.
youtu.be/XBJMz457pEo?si=U01BzZccgLWEEuii
See the rest of this series, plus this thread on the Duet3d forum for more info.
forum.duet3d.com/post/348374
on a Dual Gantry IDEX system - to get print speeds 3-4 times as
fast as a single headed printer.
Slightly less capable than the full dual IDEX approach suggested in other videos, but also less complex.
See this post in the Duet3d forum for background info.
forum.duet3d.com/post/348374
For background info see this thread on the Duet3d Forum
forum.duet3d.com/post/348521
00:00 Intro
00:20 GCode Post Processor
01:15 Single Colour Simulation
02:13 Multi Colour Simulation
03:23 Next Steps
Version 2 - with cycles render of all simulations
00:00 Intro
00:10 Sea Cloud Cycles Render on Dual Extruder
00:52 Full Chess Set on Dual Extruder
01:25 Chess Set on Quad Extruder
Many of the same multi colour and multi material benefits still possible.
Especially if a limited duplicate mode is possible.
00:00 Intro
00:11 2 Colour Benchy
00:32 4 colour prints
01:24 7 Colour prints
01:55 Duplicate Mode
02:07 Auto Switching
V2 of video - includes 7 colour demo print in addition to 4 colour
00:00 Intro
00:41 4 Colour
01:15 7 Colour
02:02 Duplicate & MIrror Modes
02:31 Auto switching
02:56 Chess Board
03:20 Sphere
With some ideas on how IDEX parallel printing could also further speed things up.
Animations created in Blender.
00:00 Intro
00:17 4 Colour Print
01:17 7 Colour Print
01:53 Duplicate and Mirror Mode
02:19 Auto Switch
02:35 Globe
Some example animations using a Ratrig VCore4 IDEX as an example.
00:00 Intro
00:28 Dual Material
00:40 Duplicate Mode
00:47 Mirror Mode
00:53 Automatic Mode
01:26 Chess Board
02:05 Air Ball
02:28 Christmas Tree
03:02 Next Steps
Refer here for background info
forum.bambulab.com/t/cruise-ship-print/5122/205?u=ukdavewood
Music by Water Willow
by Origami Repetika
from freemusicarchive.org
Refer here for background details
forum.bambulab.com/t/blender-multicolour-bambustudio-gcode-importer/97948?u=ukdavewood
Using x1c model from MaxG on Printables
printables.com/model/284587-detailed-model-of-the-bambu-lab-x1-combo
The add-on is available here github.com/ukdavewood/Blender-Multicolour-GCode-Importer
It is based on an earlier plugin by Kevin Nunley.
The model shown in the demo is a derivation of this shoehorn model by Dave Wood
makerworld.com/en/models/122098#profileId-131553
Sail printed using BambuLab Marble PLA
Music Ordinary Day by Cavallo Pazzo
For more info about this print see
forum.bambulab.com/t/cruise-ship-print/5122/200?u=ukdavewood
Available on Makerworld
makerworld.com/en/models/516744#profileId-432996
For background info see
forum.bambulab.com/t/cruise-ship-print/5122/134?u=ukdavewood
makerworld.com/en/models/486881#profileId-399722
For more details of the Fusion 360 design process see
youtu.be/8nn6alL9OaQ
For STLs of some of the models see - makerworld.com/en/@Ukdavewood
For more background info see
forum.bambulab.com/t/cruise-ship-print
For STLs of some of the models see - makerworld.com/en/@Ukdavewood
For more background info see
forum.bambulab.com/t/cruise-ship-print
This video contains background info, and some details on how to join the parts together to form a small table, that can as more parts become available be extended.
Parts of video may need to be slowed down.
See Makerworld for STLs makerworld.com/en/models/135517#profileId-147293
See this forum post for background info and other ideas.
forum.bambulab.com/t/making-better-use-of-flush-into-object-in-bambu-studio/29422?u=ukdavewood
Flush-into waste approach originally inspired by videos from @3dpprofessor
Background music from Cavallo Pazzo. Ordinary Day, from FreeMusicArchive.org
proposals - but might be more practical - if X1C/P1P/P1S can be persuaded to print on top of the add-on moving bed component.
Using this Blender addon
github.com/ukdavewood/Blender-Multicolour-GCode-Importer
Created in Blender using this addon
github.com/ukdavewood/Blender-Multicolour-GCode-Importer
Created as part of a fully independent multi headed printer proposal.
See other videos on this channel for further details.


