Wood Turning (Wood Turners Now)Check out Jim Duxbury's homemade dead offset chuck. If you are like me, you're going to make one for yourself. It's going to be great to add this to my collection of chucks.
2023-01-18 Homemade Dead Offset Chuck by Jim DuxburyWood Turning (Wood Turners Now)2023-01-22 | Check out Jim Duxbury's homemade dead offset chuck. If you are like me, you're going to make one for yourself. It's going to be great to add this to my collection of chucks.2024-10-09 World Wide Wood Turners MeetingWood Turning (Wood Turners Now)2024-10-16 | Welcome to the World Wide Wood Turners Meeting for 2024-10-09. Find out how you can deep hollow without special hollowing tools, see some great projects done by other members, and just enjoy the meeting as a whole.2024-10-09 Double Turned Vase with Tim HatchWood Turning (Wood Turners Now)2024-10-16 | During this meeting, on 2024-10-09, Tim showed us how we can create deep vases and other deep hollow projects in the event we do not have a hollowing systerm. This is the perfect way to get the job done well with minimal tools.2024-10-09 Homemade Drill Sharpening Gauge with Glenn DornakWood Turning (Wood Turners Now)2024-10-16 | During the Meeting, Glenn Dornak showed us a homemade gauge he made to help him sharpen his drill bits.
See the video and consider making your own gauge.2024-10-09 Drill Sharpening Jig with Dane ChandlerWood Turning (Wood Turners Now)2024-10-16 | During the meeting, Dane reminded us that he provided a demonstration for sharpening drill bits, and showed how he made a drill sharpening jig on 2024-03-13. During this video, he gave us a quick, yet useful summary of his previous demo. Actually, this is a good tip video. The previous tips and tricks video was not broken out of the full Meeting Video for 2024-03-13 because this was a full 3 hours of tips and tricks day.
Watch this video and see if this is enough of a video to help you learn to sharpen bits and make the jig. If this is inadequate, check out the original detailed demo.2024-10-02 World Wide Wood Turners MeetingWood Turning (Wood Turners Now)2024-10-08 | Welcome to the World Wide Wood Turners Meeting for 2024-10-02. Enjoy the demonstration, the gallery and chat found in this week's meeting. You will enjoy yourself.2024-10-02 Demo: End-Matching with Joaquin JuataiWood Turning (Wood Turners Now)2024-10-08 | This is a demo with that Joaquin referres to as End Matching for sphalting, though it there may be another name for this process. It was an interesting idea for creating a very interesting pattern and effect in your turning. Check out the video.
If you have anothr name for this process, let us know.2024-10-02 Safety Moment with Sue JilekWood Turning (Wood Turners Now)2024-10-08 | Welcome to the Safety Moment with Sue Jilek. Sue references heavy weather in the video. She references hurricane, Helene, in September 2024. This hurricane did quite a lot of damage and passed close to her in Florida.2024-09-25 World Wide Wood Turners MeetingWood Turning (Wood Turners Now)2024-09-30 | Welcome to the World Wide Wood Turners Meeting for 2024-09-25. Enjoy the gallery, talk and demo for 2024-09-25. Excuse the short interlude after the demo. We fell short of gallery, and Dane was really hoping to stimulate folks into joining in with the display of their work and volunteering for demo. If you are interested in showing your work, join use and show your work. We will be very happy to have you show your talent too.2024-09-25 Demo: Turning a Napkin Stand with Martin ClarksonWood Turning (Wood Turners Now)2024-09-30 | Check out Martin Clarkson's demo on turning a napkin stand. This isn't your typical turning. It's a great idea for a napkin holder that would be made using components.2024-09-25 Homemade Sleeve for Pin Jaws by Matt HarberWood Turning (Wood Turners Now)2024-09-30 | In the 2024-09-25 meeting, Matt points out how you can make sleeves for different jaws, including pin jaws, to make it possible to hold items that are just too small to fit in jaws you may have ...2024-09-25 Tool Handle Collets with Martin ClarksonWood Turning (Wood Turners Now)2024-09-30 | See Martin Clarkson's answer talk about the collets he uses in his homemade handles. They're custom made, and you might like to hear about them. They might be great for you too.2024-09-25 Skew Talk with Martin ClarksonWood Turning (Wood Turners Now)2024-09-30 | Have you ever noticed Martin Clarkson's round skew? It's not the usual skew. Check out his skew. You might find it especially interesting. Most people that notice this skew want to know more and want to find out more.2024-09-25 Safety Moment with Sue JilekWood Turning (Wood Turners Now)2024-09-30 | Enjoy the 2024-09-25 Safety Moment with Sue Jilek. As always, it will make you feel much better.2024-09-18 Post Meeting ChatWood Turning (Wood Turners Now)2024-09-30 | Check out the Post Meeting Chat for 2024-09-18. There was lots of great content on topics you are going to find great.2024-09-18 World Wide Wood Turners MeetingWood Turning (Wood Turners Now)2024-09-25 | Welcome to the World Wide Wood Turners Meeting for 2024-09-18. Enjoy the full meeting, even the pre-meeting content. During this week, we had some interesting content during the pre-meeting , so, I left that in too.2028-09-18 Setup to use Patterns with Dewey JohnsonWood Turning (Wood Turners Now)2024-09-24 | During this weeks demo, Dewey Johnson explained how to use patterns to create duplicates. In the process, you need to create an environment to use the patterns. This video shows how to set up the environment.2028-09-18 Demo: Duplicating and Patterns with Dewey JohnsonWood Turning (Wood Turners Now)2024-09-24 | Today, Dewey talks about the use of patterns, and making patterns in woodturning. Dewey includes an explanation for setting up lighting to allow the use of patterns in the process.2024-09-18 Vacuum Chuck DiscussionWood Turning (Wood Turners Now)2024-09-24 | Following the use of a vacuum chuck in today's demo, a conversation on vacuum chucks happened. Check out the discussion on vacuum chucks, suction, and sealing.2024-09-18 Safety Moment with Sue JilekWood Turning (Wood Turners Now)2024-09-24 | Enjjoy a reminder about safety by Sue Jilek. Sue reminds us how dangerous it can be to forget to use your mask or respirator.2024-09-18 Drying ultra-thin, wet, once turned projects with KadeWood Turning (Wood Turners Now)2024-09-24 | Kade does thin, once turned, ultra-thin work. Kade offers an explanation on how he dries his work to minimize warping and moving of the projects as they dry and can remain once turned projects.2024-09-11 Post-Meeting ChatWood Turning (Wood Turners Now)2024-09-24 | Check out the Post Meeting Chat for 2024-09-11. This post-meeting chat had some realllllllly interesting content on finishing and enhancing your finished projects. Actually, some of the content in this post-meeting chat should have ended up in our normal meeting time and be caught by everyone, not just the after-meeting folks.2024-09-11 World Wide Wood Turners MeetingWood Turning (Wood Turners Now)2024-09-18 | Welcome to the World Wide Wood Turners Meeting for 2024-09-11. It was a great meeting, and you will enjoy the time you spend check out the video.2024-09-11 Demo: Turning Talc Stone (soapstone) with Paul HannabyWood Turning (Wood Turners Now)2024-09-18 | You should check out Paul's turning. This turning of soapstone turned out great. You may want to try turing Talc stoone too.2024-09-11 Carving Jig with Dewey JohnsonWood Turning (Wood Turners Now)2024-09-18 | Dewey shows us his homemade jig intended to help do better carving of his goblets and other projects.
This might be something you'd like to see. Dewey tells us he will give us more information and picture in the near future. I hope so, I like this jig.2024-09-11 Safety Moment with Sue JilekWood Turning (Wood Turners Now)2024-09-18 | Nice choice of a safety reminder Sue. We need to be reminded about this from time to time.2024-09-04 Post-Meeting ChatWood Turning (Wood Turners Now)2024-09-18 | Oh my Gosh, it you missed the post-meeting chat for 2024-09-04, you missed an incredible discussion. Really, you should check this video out.2024-09-04 World WIde Wood Turners MeetingWood Turning (Wood Turners Now)2024-09-10 | I think you just might like the 2024-09-04 weeks meeting of the World Wide Wood Turners. Let us know what you think. Do you have meeting suggestions?2024-09-04 Demo: Creating a Knucklebone with Doug MillerWood Turning (Wood Turners Now)2024-09-10 | Take the time to see Doug Miller explain how to turn a Knucklebone.2024-09-04 Discussion on Drill bitsWood Turning (Wood Turners Now)2024-09-10 | During the World Wide Wood Turners meeting of 2024-09-04, there was a interesting discussion on using drill bit care and maintenance.2024-09-04 Safety Moment with Sue JilekWood Turning (Wood Turners Now)2024-09-10 | Enjoy the safety moment on bandsaws, and blade safety.2024-09-04 Discusion on Walnut OilWood Turning (Wood Turners Now)2024-09-10 | During the World Wide Wood Turning Meeting for 2024-09-04, There was a enjoyable and informative discussion on the use of walnut oil.2024-09-04 Homemade: Steady Rest by Ruby ClerWood Turning (Wood Turners Now)2024-09-10 | Check out the Homemade steady rest shown by Ruby Cler in the 2023-09-04 meeting of the World Wide Wood Turners.2024-08-28 Post-Meeting ChatWood Turning (Wood Turners Now)2024-09-10 | Sit in on the World Wide Wood Turners Post-Meeting Chat for 2023-08-28. Hear about the SWAT meeting, and just general chat between the folks.2024-08-28 World Wide Wood Turners MeetingWood Turning (Wood Turners Now)2024-09-04 | Welcome to the World Wide Wood Turners Meeting for 2024-08028. Enjoy the meeting, front to back. See what wee see every Wednesday.2024-08-28 Demo: Turning a Deep Hollow Bowl/Vase with Kirk KappWood Turning (Wood Turners Now)2024-09-04 | Kirk Kapp gives us his suggestions on how to turn a deep hollow vase. If you have a question how to turn a hollow through a small neck vase, this may give you some really interesting ideas in this video.2024-08-28 Question by Dean GrimesWood Turning (Wood Turners Now)2024-09-04 | Dean Grimes has a question. Maybe you can help with an answer to the question. We had a bit of a discussion, but, there is always room for comments on this topic from everyone. The question:
What do I need t think about in designing my new shop ...???2024-08-28 Homemade Tool: Captured Ring Tool with Matt HarberWood Turning (Wood Turners Now)2024-09-04 | Chek out the Captured Ring tool that Matt Harber made. Do you need one?2024-08-28 Safety Moment with ue JilekWood Turning (Wood Turners Now)2024-09-04 | Remember to check out Sue Jilek's Safety Moment for 2023-08-28.2024-08-21 Post-Meeting ChatWood Turning (Wood Turners Now)2024-09-04 | Welcome to the Post Meeting Chat for 2024-08-21. See what happens when the meeting end, but, the talk goes on.2024-08-21 World Wide Wood Turners MeetingWood Turning (Wood Turners Now)2024-08-28 | Welcome to the World Wide Wood Turners Meeting for 2024-08-21. Get your does of Safety Moments, Two demonstrations, finishing ideas, lots of great gallery and discussions.2024-08-21 Demo: Turning an Acorn Box with Dane ChandlerWood Turning (Wood Turners Now)2024-08-28 | Check out the turning of an acorn box with Dane Chandler. Something you can turn with quality wood, or remains of a previous project. You'll like it.2024-08-21 Emerging Bowl with Waukeene VinsonWood Turning (Wood Turners Now)2024-08-28 | Have you ever heard of turning an emerging bowl? Wild!! Let Waukeene explain to you how to turn an emerging bowl.2024-08-21 Safety Moment with Sue JilekWood Turning (Wood Turners Now)2024-08-28 | Check out this weeks discussion on Carpel-Tunnel Syndrome.2024-08-21 Recovery and FInish by Billy BurtWood Turning (Wood Turners Now)2024-08-28 | Check out Billy Burt's recovery project, and listen to his method for creating the incredible shine he got on the project. The shine was so intense, you could see reflections in the finish.2024-08-21 Discussion on cleaning spray can nozzlesWood Turning (Wood Turners Now)2024-08-28 | Have you every had a spray can nozzle gum up? We had an interesting discussion on how to deal with the problem.2024-08-14 Post-Meeting ChatWood Turning (Wood Turners Now)2024-08-28 | If you missed the Post-Meetig Chat for 2024-08-14, you missed Mark offering a wealth of knowledge. Really, you won't lose by listening this Post-meeting Chat. It is nothing like the usual post-meeting content.2024-08-14 World Wide Wood Turners MeetingWood Turning (Wood Turners Now)2024-08-21 | Welcome to the World Wide Wood Turners meeting for 2024-08-14. Enjoy the gallery, discussions, hints and demo.2024-08-014 Demo: Sanding for Woodturners by Joaquin JuataiWood Turning (Wood Turners Now)2024-08-21 | This week, Joaquin does something different. No touching classic turning tools in this video. This week, Joaquin reminds us about the techniques of sanding to make your final project much better during the finish phase. Get rid of those swirls, scratches, uneven areas, and complete the sanding phase in the best time.2024-08-14 Parting Tool by Joaquin JuataiWood Turning (Wood Turners Now)2024-08-21 | Joaquin shows us the first parting tool he ever made. Interesting.2024 08 14 Hollowing tool by JJWood Turning (Wood Turners Now)2024-08-21 | Joaquin gave us a look at this Hollowing tool, and his handle. His handle design make it very stable when hollowing.