Uploaded February 2016 | Updated September 2026, 1 week ago
FXT795-2 Raceband 5.8GHz FPV Transmitter SMA Female - superlight and small with push button channel and band selector.
It also comes with a built in microphone and a jumper wire which can be cut which will increase the power output to 200mw min . To revert back to 25mw simply bridge the cut with a tiny dab of solder or if your technically minded you can fit a micro switch.
Technical Specifications
Transmitter 5.8 Ghz 25-200mW (may vary depending on channel selection will be 200mw min)
40 channels
Compatible RaceBand
Power: 7-20 Volts with 5V output to power cameras etc
SMA Female antenna connector
Microphone
Size: 31x22x10mm
Weight: 7.5 grams
Product Contents
1 x mini video transmitter 5.8 Ghz 25/40-compatible 200mW channels RaceBand
1 x antenna
1 x connection cable
Link: quadcopters.co.uk/58ghz-25mw-200mw-40ch-raceband-micro-vtx-2341-p.asp
Landing pads by: http://www.uav.graphics/
My Instagram: instagram.com/that_hpi_guy
My Facebook: facebook.com/ThatHpiGuy
Donate to keep the channel going: goo.gl/pFQDBj
Thanks for watching.
FXT795-2 Raceband 5.8GHz FPV Transmitter SMA Female - superlight and small with push button channel and band selector.
It also comes with a built in microphone and a jumper wire which can be cut which will increase the power output to 200mw min . To revert back to 25mw simply bridge the cut with a tiny dab of solder or if your technically minded you can fit a micro switch.
Technical Specifications
Transmitter 5.8 Ghz 25-200mW (may vary depending on channel selection will be 200mw min)
40 channels
Compatible RaceBand
Power: 7-20 Volts with 5V output to power cameras etc
SMA Female antenna connector
Microphone
Size: 31x22x10mm
Weight: 7.5 grams
Product Contents
1 x mini video transmitter 5.8 Ghz 25/40-compatible 200mW channels RaceBand
1 x antenna
1 x connection cable
Link: quadcopters.co.uk/58ghz-25mw-200mw-40ch-raceband-micro-vtx-2341-p.asp
Landing pads by: http://www.uav.graphics/
My Instagram: instagram.com/that_hpi_guy
My Facebook: facebook.com/ThatHpiGuy
Donate to keep the channel going: goo.gl/pFQDBj
Thanks for watching.

