Uploaded September 2024 | Updated September 2026, 6 days ago

---

In this video, we'll guide you through the steps to replace the belt on your SuperHandy Stump Grinder:

-Remove the belt cover by unscrewing 4 bolts.
-Release the clutch lever to relieve belt tension.
-Loosen (but do not remove) the 3 belt guide posts.
-Remove the old belt by turning the grinder wheel while guiding and pulling the belt off the pulley. You may need assistance.
-Install the new belt.
-Pull the clutch into the operating position to apply tension to the belt.
-Tighten the 3 belt guides, leaving about 1/2 inch space between the belt and the post.
-Release the clutch and check for proper belt tension.
-Reinstall the belt cover.

Follow these steps for a smooth belt replacement and keep your stump grinder running efficiently!

Purchase:
Amazon - amazon.com/dp/B0CGVW6XBD
SuperHandy Store - superhandyus.com/products/superhandy-stump-grinder-guo110-fba