PVT collectors provide both electrical and thermal energy. Electrical power is around 20% more than standard PV panel plus 3 to 4 times more thermal power compare with electrical power from PV standard module. The greater part of the absorbed solar radiation by photovoltaic is converted into heat (at about 70% ‐ 80%), small part reflected and the rest into electricity. As result of that cell temperature of PV is increasing. This effect reduces PV electrical efficiency. In façade or inclined roof installations on buildings, the thermal losses are reduced due to the thermal protection of PV rear surface and PV modules operate at higher temperatures. This undesirable effect can be partially avoided by PVT hybrid collector by applying a suitable heat extraction with a fluid circulation, keeping the electrical efficiency at a satisfactory level.
PVT collectors are divided in two groups:
a) Glazed: PV panel with additional glass above PVT panel which produce more thermal power and b) Unglazed: PV panel without additional glass which produce more electrical power.
PVT collectors provide both electrical and thermal energy. Electrical power is around 20% more than standard PV panel plus 3 to 4 times more thermal power compare with electrical power from PV standard module. The greater part of the absorbed solar radiation by photovoltaic is converted into heat (at about 70% ‐ 80%), small part reflected and the rest into electricity. As result of that cell temperature of PV is increasing. This effect reduces PV electrical efficiency. In façade or inclined roof installations on buildings, the thermal losses are reduced due to the thermal protection of PV rear surface and PV modules operate at higher temperatures. This undesirable effect can be partially avoided by PVT hybrid collector by applying a suitable heat extraction with a fluid circulation, keeping the electrical efficiency at a satisfactory level.
PVT collectors are divided in two groups:
a) Glazed: PV panel with additional glass above PVT panel which produce more thermal power and b) Unglazed: PV panel without additional glass which produce more electrical power.Гостување во емисијата Здраво Македонијо на проф.др. Илија Насов.Camel Solar2022-07-28 | Гостување во емисијата Здраво Македонијо на проф.др. Илија Насов, претседател на борд на директори во Камел Солар и претседател на Солар Македонија, каде што се разговараше за сончевата енергија и нејзиното искористување како начин на намалување на енергетската криза и решавање на проблемите од климатските промени.Хибриден колектор за комбинирано производство на електрична и топлинска енергија - скратена верзијаCamel Solar2020-01-14 | ПВТ хибриден колектор Центар за Плазма Технологии, Плазма доо Скопје
Соларен термален абсорбер: Камел Солар ФотоВолтаичен модул: ПиКСел Гроуп Истражување и развој извршено во: Центар за Плазма технологии, Плазма доо Скопје
ПВТ колекторите произведуваат електрична и термална енергија. Произведената електричната енергија од ПВТ колекторите е за околу 15% до 20 % повеќе во однос на стандардниот ФотоВолтаичен модул а термалната енергија е за околу 3 пати поголема во споредба со електричната енергија од стандарниот ФотоВолтаичен модул. Поголемиот дел од абсорбираната соларна радијација во фотоволтаикот се претвара во топлинска енергија (околу 70-80%), мал дел се рефлектира, и остатокот се претвара во електрична енергија. Како резултат на ова, температурата на ќелиите на фотоволтаикот се зголемува. Овој ефект ја намалува ефикасноста на фотоволтаикот. Во инсталациите во фасади или на кос кров на објектите, термалните загуби се редуцирани поради намаленото ладење од задната страна на фотоволтаикот и модулот работи на повисоки температури. Овој непосакуван ефект може да се избегне со ПВТ хибридниот колектор, каде се одзема топлината од ПВ модулите со циркулација на флуид, притоа одржувајќи ја електричната ефикасност на задоволително ниво. ПВТ колекторите се делат на две групи: a) Застаклени: ФотоВолтаични панели со дополнително стакло над Фотоволтаичниот модул, кои произведуваат повеќе термална енергија, и b) Незастаклени: ФотоВолтаични панели без дополнително стакло, кои произведуваат повеќе електрична енергија.PVT Hybrid Collector for combined production of electrical and thermal energy - Short versionCamel Solar2020-01-14 | Center for Plasma Technlogy Plasma doo Skopje
Solar thermal absorber: Camel Solar PV module: PiKCell Group
Assembled at: Camel Solar Researched and developed by:
Center for Plasma Technologies Supported by: Fund for Innovation and Technology Development
PVT collectors provide both electrical and thermal energy. Electrical power is around 20% more than standard PV panel plus 3 to 4 times more thermal power compare with electrical power from PV standard module. The greater part of the absorbed solar radiation by photovoltaic is converted into heat (at about 70% ‐ 80%), small part reflected and the rest into electricity. As result of that cell temperature of PV is increasing. This effect reduces PV electrical efficiency. In façade or inclined roof installations on buildings, the thermal losses are reduced due to the thermal protection of PV rear surface and PV modules operate at higher temperatures. This undesirable effect can be partially avoided by PVT hybrid collector by applying a suitable heat extraction with a fluid circulation, keeping the electrical efficiency at a satisfactory level.
PVT collectors are divided in two groups:
a) Glazed: PV panel with additional glass above PVT panel which produce more thermal power and b) Unglazed: PV panel without additional glass which produce more electrical power.Хибриден колектор за комбинирано производство на електрична и топлинска енергијаCamel Solar2019-12-11 | ПВТ хибриден колектор Центар за Плазма Технологии, Плазма доо Скопје
Соларен термален абсорбер: Камел Солар ФотоВолтаичен модул: ПиКСел Гроуп Истражување и развој извршено во: Центар за Плазма технологии, Плазма доо Скопје
ПВТ колекторите произведуваат електрична и термална енергија. Произведената електричната енергија од ПВТ колекторите е за околу 15% до 20 % повеќе во однос на стандардниот ФотоВолтаичен модул а термалната енергија е за околу 3 пати поголема во споредба со електричната енергија од стандарниот ФотоВолтаичен модул. Поголемиот дел од абсорбираната соларна радијација во фотоволтаикот се претвара во топлинска енергија (околу 70-80%), мал дел се рефлектира, и остатокот се претвара во електрична енергија. Како резултат на ова, температурата на ќелиите на фотоволтаикот се зголемува. Овој ефект ја намалува ефикасноста на фотоволтаикот. Во инсталациите во фасади или на кос кров на објектите, термалните загуби се редуцирани поради намаленото ладење од задната страна на фотоволтаикот и модулот работи на повисоки температури. Овој непосакуван ефект може да се избегне со ПВТ хибридниот колектор, каде се одзема топлината од ПВ модулите со циркулација на флуид, притоа одржувајќи ја електричната ефикасност на задоволително ниво. ПВТ колекторите се делат на две групи: a) Застаклени: ФотоВолтаични панели со дополнително стакло над Фотоволтаичниот модул, кои произведуваат повеќе термална енергија, и b) Незастаклени: ФотоВолтаични панели без дополнително стакло, кои произведуваат повеќе електрична енергија.Integrated Facade Solar Thermal CollectorsCamel Solar2018-06-07 | ...R&D activities and projects in Plasma and Camel SolarCamel Solar2018-06-07 | ...TV Emisija Patenti - Prof.dr. Ilija Nasov - tret delCamel Solar2018-06-07 | ...TV Emisija Patenti - Prof.dr. Ilija Nasov - vtor delCamel Solar2018-06-07 | ...TV Emisija Patenti - Prof.dr. Ilija Nasov - prv delCamel Solar2018-06-07 | ...