John Heisz - I Build It | High End IKEA? Making a Modern Solid Wood Equipment Stand @JohnHeisz | Uploaded 2 years ago | Updated 4 days ago
I say "TV stand", but my TV is mounted on the wall and I'm using this for my audio equipment only. In any case, it would make a very capable TV stand - the top is solid 1" thick ash along with sides of the cabinet. I used three 8" wide boards to make the top and sides and the grain is continuous across the mitered corner joints.
The centre section is made from two 6" ash boards and a hunk of thick walnut. The shelves are actually arms that cantilever out from the middle and being open promotes better ventilation.
I say 5 boards in the title because the walnut was an optional upgrade. I could have used the offcut ends from the ash boards to make those parts by gluing two thicknesses together.
The top / sides is one piece and it lifts off of the centre section so that I can hook everything up.
The dimensions: 21" high x 21" deep x 43" long.
▶️ Project plans for sale: ibuildit.ca/plans
▶️Support the work I do on Locals:
ibuildit.locals.com
▶️ Patreon:
patreon.com/user?u=865843&ty=h
▶️ Join my Makers Mob for detailed build tutorials:
go.themakersmob.com/john-heisz-i-build-it/?via=ibuildit
My "Scrap bin" channel:
youtube.com/c/IBuildItScrapBin
#ibuildit
#woodworking
Website: ibuildit.ca
Facebook: facebook.com/I-Build-It-258048014240900
Instagram: instagram.com/i_build_it.ca
I say "TV stand", but my TV is mounted on the wall and I'm using this for my audio equipment only. In any case, it would make a very capable TV stand - the top is solid 1" thick ash along with sides of the cabinet. I used three 8" wide boards to make the top and sides and the grain is continuous across the mitered corner joints.
The centre section is made from two 6" ash boards and a hunk of thick walnut. The shelves are actually arms that cantilever out from the middle and being open promotes better ventilation.
I say 5 boards in the title because the walnut was an optional upgrade. I could have used the offcut ends from the ash boards to make those parts by gluing two thicknesses together.
The top / sides is one piece and it lifts off of the centre section so that I can hook everything up.
The dimensions: 21" high x 21" deep x 43" long.
▶️ Project plans for sale: ibuildit.ca/plans
▶️Support the work I do on Locals:
ibuildit.locals.com
▶️ Patreon:
patreon.com/user?u=865843&ty=h
▶️ Join my Makers Mob for detailed build tutorials:
go.themakersmob.com/john-heisz-i-build-it/?via=ibuildit
My "Scrap bin" channel:
youtube.com/c/IBuildItScrapBin
#ibuildit
#woodworking
Website: ibuildit.ca
Facebook: facebook.com/I-Build-It-258048014240900
Instagram: instagram.com/i_build_it.ca
