Great Ball PitThe Throne - A Lego Great Ball Contraption Module.
The Throne is a flushing Lego Toilet GBC module that uses the older sports arena corner pieces to create the toilet bowl. It uses a modified version of the Brickworld 2018 ball pump as the lift mechanism.
This module has some great motion and sound as the balls are being flushed away. It can run in stand alone display mode, or be used in a collaborative layout.
Lego Flushing Toilet GBC ModuleGreat Ball Pit2018-11-26 | The Throne - A Lego Great Ball Contraption Module.
The Throne is a flushing Lego Toilet GBC module that uses the older sports arena corner pieces to create the toilet bowl. It uses a modified version of the Brickworld 2018 ball pump as the lift mechanism.
This module has some great motion and sound as the balls are being flushed away. It can run in stand alone display mode, or be used in a collaborative layout.
#LegoGBC #GreatBallContraptionNew Lego GBC module!Great Ball Pit2022-08-15 | A new Lego GBC module by Great Ball PitBack with a new Lego GBC compact ring lift!Great Ball Pit2022-07-24 | ...Lego GBC Module - Laminar FlowGreat Ball Pit2021-11-21 | Laminar Flow, a Lego Great Ball Contraption module built for the 2021 Great Ball Pit Challenge "Great Heights".
This module meets the 2021 challenge requirements of raising the ball to a height of 24 inches (64 Bricks). It uses a twinned conveyor which is powered by a Lego Power Functions M motor. This module is unique to my previous builds by featuring a Zamor sphere filter. 30 blue Zamor spheres are continuously recirculated within the module, while the smaller Lego GBC modules are passed to the output ramp.
#LegoGBC #GreatBallContraptionLego GBC Module - S13 (Great Ball Pit 2020 Challenge)Great Ball Pit2020-11-16 | S13, a Lego Great Ball Contraption module built for the 2020 Great Ball Pit Challenge. This module uses a serpentine lift that feeds a splitter that directs balls to a weighted tipping ramp. When 13 balls are collected, the ramp releases them into the next module.
The Serpentine lift is a modified version of Lawrie George's revisions to Brian Alano's Serpentine module.
#LegoGBC #GreatBallContraptionLego Kinetic Thing - Brain of BeastGreat Ball Pit2020-07-16 | I've always wanted to test how the axle pins with stoppers would work as a GBC mechanism. In this experiment I've set them up as an agitator. I've found it works better at lower speeds to actually move the balls around. The pins are not held in and will fall out if it's turned upside-down.
#LegoGBC #GreatBallContraptionLego GBC Module - RISE+RUN Version 2Great Ball Pit2020-07-02 | RISE+RUN Version 2, a Lego Great Ball Contraption module. This module is the second version of my original RISE+RUN module, and now uses 90% studless Technic to improve overall strength, and reliability. The original used brick built piston type steps that failed quite often, so I've replaced them with tipping ramps to load the larger tipping ramps.
It is powered by a Lego PF-L motor and uses worm gear gearboxes to drive both ends of the module. In order to adjust timing of the shared drive line I've installed a phase adjustment knob that is built using a worm gear and a differential.
#LegoGBC #GreatBallContraptionLego Powered Up GBC Module - PUP-01Great Ball Pit2020-06-25 | PUP-01 is a Lego Great Ball Contraption module that is powered by the City Train/Batmobile HUB. A medium motor and color sensor are attached to the two available ports. Thanks to RJ Bricks for the design of the gearbox that translates rotation in both directions to output in one direction. This was a crucial element of the module in order to get WM01 to run in the correct direction regardless of the motors rotation.
The WM01 small conveyor is the primary lift mechanism to load the tray that feeds the second conveyor, instructions for WM01 are available at my website linked below.
#LegoGBC #GreatBallContraptionLego Boost GBC - Star Wars ModuleGreat Ball Pit2020-06-18 | This is the second of two new game boards I've created for my Lego Boost Pachinko GBC module. This one is themed to look like the iconic "Trench Run" scene from Star Wars. The jackpot is triggered when a ball enters the thermal exhaust port of the death star. To see how it works, check out the original Boost Pachinko video here: youtu.be/koTcXQhK8jo To see my original Trench Run conveyor module, click here: youtu.be/4vI8gbj-KtM
#LegoGBC #GreatBallContraptionBuilding Lego GBC: Q&A, Chat, and Chill - June 2020Great Ball Pit2020-06-14 | 2 Hour Live Stream: Building the mini-golf putter designed by Lawrie George. Instructions can be found here: lawriege.com/resources/instructions
#LegoGBC #GreatBallContraptionLego GBC Module - Worm Mill 🐛Great Ball Pit2020-06-11 | Worm Mill, a Lego Great Ball Contraption module. This module is the second in my "workshop" series of modules that are small, easy to build and reletively inexpensive. Instructions for these modules can be found at my website linked below.
This module uses a simple double windmill vertical sweeper to lift the balls up into the output area. This is achieved using a simple Worm gear to 24T transmission. It can move balls quite fast, and you can chain duplicates together using shared power.
Something interesting about this module is that the Power Functions M Motor is actually used as part of the output area, as it forms one of the walls of the channels leading out of the module.
#LegoGBC #GreatBallContraptionLego Boost GBC - Minecraft ModuleGreat Ball Pit2020-06-04 | I really enjoy Lego Minecraft, and in this video you will see a Minecraft themed game board for my Lego Boost powered Pachinko GBC module. If you want to see how it works, check out the original video from 2018 here: youtube.com/watch?v=koTcXQhK8jo
#LegoGBC #GreatBallContraptionLego GBC Module - Catamaran RemixGreat Ball Pit2020-05-21 | Will it float or sink? Catamaran Remix, a Lego Great Ball Contraption module. This module was built using pieces from the Lego Technic 42105 Catamaran set. It uses a vertical sweeper to lift the balls up and down the sails. It also has a recirculation feature for stand alone display.
Instructions for this module will be available soon on my website linked below.
#LegoGBC #GreatBallContraptionLego GBC Loop - Brickworld Virtual Con May 2020Great Ball Pit2020-05-18 | This is a video showing the layout I contributed to the Brickworld Virtual Con GBC that took place in May of 2020. 14 Lego GBC modules are in this loop, with 11 being original designs. There are approximately 80 balls in this loop, and it's being powered with 5 Lego train controllers.
#LegoGBC #GreatBallContraptionLego GBC @ Fan Expo Vancouver 2020 & New Module RevealGreat Ball Pit2020-02-27 | This is a video of the Lego GBC Layout that was at the VLC Booth at Fan Expo Vancouver 2020. 4 club members contributed to this Great Ball Contraption. Also shown in the video is my latest Lego GBC module which is a remix of set 42105 Catamaran. It is a sweeper style module that can recirculate onto itself.
#LegoGBC #GreatBallContraptionGBP Challenge 2019 - Winners AnnouncementGreat Ball Pit2019-11-29 | Announcing the winners of the Great Ball Pit Challenge 2019 - Wheels Up.
14 builders from 5 countries entered into this years Challenge that I host over on Discord. After collecting the votes from everyone the following 2 winners were revealed.
#LegoGBC #GreatBallContraptionGreat Ball Pit @ BrickCon 2019 - Setup and Fly OverGreat Ball Pit2019-10-25 | In this video I share the setup of my Lego GBC modules at BrickCon 2019. I also provide a top down "fly over" of the entire loop, along with some additional static shots.
Let me know in the comments which module was your favorite from BrickCon 2019!
#LegoGBC #GreatBallContraptionLego GBC Module - Shared Power CircusGreat Ball Pit2019-10-10 | Shared Power Circus - A Lego GBC Module featuring 4 small modules powered by 1 Lego Power Functions XL motor. I've recently upgraded my Shared Power Circus by adding a 4th module, and re-arranging the pre-existing modules. The new configuration is Wheel, Whirligig, DROP, and Jumbo.
The Stackable Wheel was designed by Lasse Deleuran, Whirligig and WM01 were designed by Matt Norman (Me), and Push Arm GBC was designed by Kevin Mitcham.
This ran with zero issues all weekend at BrickCon 2019 for over 15 total hours.
This video is also a test of my 4K recording and editing with different software.
#LegoGBC #GreatBallContraptionLego GBC Module - SplatiyukiGreat Ball Pit2019-09-05 | Splatiyuki a Lego Great Ball Contraption module. This module is based on Akiyuki's Splat gear loader for his "Cars with ACC" GBC module. I've modified it to have a second splat gear lift and it is powered by a Lego Power Functions M Motor instead of the Boost Hub that Akiyuki used.
I'm really happy to have been able to use up all of the coral 1x12 corner tiles that I received in a convention trade bag as well as some of the engine intakes I found at the Lego Store Retail PAB wall.
Akiyuki's original Boost HUB Splat Lift instructions can be found on his website @ Akiyuki.jp
#LegoGBC #GreatBallContraptionLego GBC Module - Tiny StepperGreat Ball Pit2019-07-18 | Tiny Stepper, a tiny Lego Great Ball Contraption module.
This module is 10x10x10 in size, it is the smallest size a GBC module can be if you are following the standard. The lift mechanism is a simple stepper, and it is powered by a Lego Power Functions M motor.
The input bin can take around 20 balls without issue, which is 10 short of the 30 ball standard.
You can see this module in a GBC layout in my recent 9 module layout video here: youtu.be/cXphIG5Qyew
#LegoGBC #GreatBallContraption9 Lego GBC Modules - July 2019Great Ball Pit2019-07-11 | This video shows 9 of my Lego Great Ball Contraption modules setup in a continuous loop. Some of them are my newer builds from 2019 like "Money Bin", "Rise & Run", and "Multipath". Everything is powered from 3 9v train controllers. There is over 100 balls in this loop but a large number of them are sitting inside the Money Bin as decoration.
#LegoGBC #GreatBallContraptionLego GBC Module - MultipathGreat Ball Pit2019-07-04 | Multipath, a Lego Great Ball Contraption module. This module was built as a utility module to split the flow of balls into two separate paths. This module uses a stepper and a vertical sweeper to move the balls to the output ramps. It is powered by a Lego Power Functions M motor. You can also set either output to recirculate if necessary.
#LegoGBC #GreatBallContraptionBrickWorld 2019 GBC Sawtooth - Lego Great Ball Contraption ModuleGreat Ball Pit2019-06-13 | Sawtooth a Lego Great Ball Contraption Module. This module was designed by John Brost for the Lego GBC Workshop at BrickWorld 2019 in Chicago. I'm calling this variant "Grainbow" because of the grey + rainbow colouring.
I built this using just a parts list, the cover image, and a video clip from Beyond the Brick, as the instructions have not been publicly released at the time this was built. It uses a "Jigsaw" style stepper to move the balls from the input bin to the output.
It is powered by a Lego Power Functions M motor, and is built in such a way that the entire powertrain is suspended by the two drive axles. This is quite unusual, and I'm curious if there will be any significant wear on the axles or pin holes because of this.
#LegoGBC #GreatBallContraptionLego GBC Module - Build and Chat w/ MattGreat Ball Pit2019-06-09 | Chatting and Building some Lego Great Ball Contraptions.
#LegoGBC #GreatBallContraptionLego Old Town Road GBC Module 🐴Great Ball Pit2019-06-06 | Lego Old Town Road Great Ball Contraption Module. This Lego GBC module is themed after the song by Lil Nas X (feat Billy Ray Cyrus) which was produced by Young Kio.
This module uses 2 different mechanisms to move the balls onto the next module, a Lego conveyor lift and a sweeper. The conveyor is pretty basic, but I've decorated it to look like an old grain elevator. The sweeper rotates pushing both the horse and the sports car which make contact with the Lego GBC balls and push them to the output ramp. The sweeper mechanism is hidden inside a mountain top.
To finish off the decoration I used some additional Lego cowboy themed minifig's as well as some Lego plants and animals.
This module can output balls in almost any direction making it very useful for large collaborative layouts where you may need a corner or u-turn.
#LegoGBC #GreatBallContraptionLego GBC Module - Rise and RunGreat Ball Pit2019-05-30 | Rise and Run, a Lego Great Ball Contraption module. This module uses a pair of steps and tiered ramps to move the balls along. I was happy to use up a bunch of Dark Azur coloured parts in this module.
It is powered with a Power Functions L motor, and is not clutched. I realized that a clutch was useless when used in a drivetrain with worm gears. I used the L motor because I needed the speed of the M, but the torque of the XL (which was too slow).
👍 Thanks for watching! 😍Lego GBC Module - The Money Bin 💰Great Ball Pit2019-05-23 | 👁 GIVEAWAY DETAILS BELOW 👁 The Money Bin - A Lego Great Ball Contraption Module. The Money Bin is a Lego GBC Module created to celebrate reaching the 1000 Subscriber milestone here on YouTube. It is based on Scrooge McDucks money bin seen in the classic Disney comics and also the Ducktales cartoon.
It uses a simple conveyor to fill up the vault with GBC balls, when enough balls enter they are dumped inside the bin (or out to the next module).
GIVEAWAY DETAILS ‣ I am giving away a sealed copy of Lego Technic set 42071 Dozer Compactor. ‣ I will be picking one random person who has commented on this video at 12:00PST May 31st, 2019. ‣ I will post the name of the winner in a pinned comment here. ‣ They will have 72 hours to email their contact information to contact@greatballpit.com If that doesn't happen I will pick another person.
👍 Thanks for watching! 😍Lego GBC Module - Duplo SlideGreat Ball Pit2019-05-13 | Is this the worlds longest Duplo GBC Slide? It's built using 20 of the newer Duplo slides and then supported with Technic bricks and beams. The lift mechanism is my reliable TTC (Tall Technic Conveyor).
#LegoGBC #GreatBallContraptionBrickCan 2019 - 8 minutes inside the Lego Great Ball ContraptionGreat Ball Pit2019-05-10 | Explore the sights and sounds of what it's like to be up close to these Lego machines that we build. This video features 8 minutes of the Lego GBC that was at BrickCan 2019.
#LegoGBC #GreatBallContraptionGoing to BrickCan 2019Great Ball Pit2019-05-08 | A small video of my trip to the BrickCan 2019 Lego Convention @ the River Rock Casino in Richmond BC. I was displaying my Lego GBC modules alongside 7 other builders at this event.
#LegoGBC #GreatBallContraptionLego GBC Layout - BrickCan 2019Great Ball Pit2019-05-06 | Follow the blue ball through the 57 Lego Great Ball Contraption Modules at BrickCan 2019. 7 different builders were in the loop at one point. A few failed and had to be pulled out, some like chicken pump failed catastrophically.
#LegoGBC #GreatBallContraptionLego GBC Utility - The Better Ball BinGreat Ball Pit2019-04-29 | The Better Ball Bin, a multi-function utility item for Lego GBC builders. I wasn't satisfied with the smaller 30 ball bin I created last year, so I created this larger, more functional ball bin.
Features: - Holds 95 Balls Securely. - Double Hinged Lid stays out of the way when opened. - Easy Pour Slot provides a controlled flow of balls when emptying the bin. - Flip up 10 brick tall measure for GBC Standard I/O compliance testing. - Extra Parts and Tool Storage (25L Unjammer included).
This is a rebuilt version of my original GBB-8C module (which can be seen here). The original was quite clever as I was able to hide the motor and lift mechanism inside BB-8. While it looked good, in reality it was horribly unreliable and needed constant attention at BrickCan 2018.
I've decided to giver BB-8 one last hurrah and built it on top of the rock solid BrickWorld 2018 Ball Pump for display at BrickCan 2019. It doesn't look as good as before, but it will be much more reliable now.
This Lego GBC Module uses a Lego Mindstorms EV3 Hub and the Touch Sensor to count how many balls go through the module. I've added the ability to save and load the count which will be useful for multi-day events.
#LegoGBC #GreatBallContraption4 Lego Minecraft GBC Module LayoutGreat Ball Pit2019-02-25 | Just a short video of my 4 Minecraft themed Lego GBC modules. The modules in this layout are Morgan's Mine, Matt's Mine, Chicken Pump, and Winter River.
#LegoGBC #GreatBallContraptionLego GBC Module - Winter RiverGreat Ball Pit2019-02-18 | Winter River - A Lego GBC Module.
This Lego Minecraft themed module uses a small conveyor to lift balls up to a tipping table where they roll back and forth for a little while before being dropped off to the right. It uses pieces from the Lego Minecraft Polar Igloo 21142 set. It is the 4th Minecraft themed module I have built.
#LegoGBC #GreatBallContraption3 Small Lego GBC modules with free instructions.Great Ball Pit2019-01-11 | A short video of 3 modules running in a small GBC layout. Free instructions for these 3 modules can be found below.
#LegoGBC #GreatBallContraptionGreat Ball Pit Channel Trailer 2019Great Ball Pit2019-01-11 | Hey guys I'm Matt, also known as the Great Ball Pit. Welcome to my channel where I focus on Lego Great Ball Contraptions. I upload 2-4 videos per month, usually on Thursdays. Check out the links below to discover more.
👍 Thanks for watching! 😍Lego GBC Module - Separation AnxietyGreat Ball Pit2019-01-07 | Separation Anxiety - a Lego Great Ball Contraption Module.
This all new MOC for 2019 uses 25 brick separators attached to a sideways conveyor belt to lift the balls up to the output. Some people have said it looks like an angry caterpillar or insect when it's not moving. What do you think?
This tall conveyor is built primarily with studless technic. I don't usually build in this style but I wanted to use up a bunch of Technic parts that I had. This tall conveyor will be useful for long bypass runs, and whatever other clever widgets I can come up with in the future.
I have built 2 of these and plan on keeping them in my module collection.
#LegoGBC #GreatBallContraptionLego GBC Work in Progress - Train Module TurntableGreat Ball Pit2018-12-21 | A quick video showing the turntable I've built for my upcoming train module. Thanks to Doug72 @ the Eurobricks Technics forum for helping me get this moving faster than the original.
👍 Thanks for watching! 😍Lego GBC Module - Chicken PumpGreat Ball Pit2018-11-05 | Chicken Pump - A Lego Great Ball Contraption Module. Chicken Pump is a minecraft themed Lego GBC module using the lift mechanism from the Brickworld 2018 Ball Pump.
I built this module as my friendly entry into the 2018 GBP Challenge. The challenge was to build a module within a 16x16 base and be able to run in a collaborative layout meaning the input height and output speed needed to meet the GBC standards.
This is my 3rd Lego Minecraft themed module, and the chicken was based on the one found in 21140 The Chicken Coop.
#LegoGBC #GreatBallContraptionLego Boost Pachinko GBC ModuleGreat Ball Pit2018-10-22 | Boost Pachinko a Lego Great Ball Contraption Module. This Lego Boost GBC module plays like a Pachinko game, with a jackpot paid out when the ball goes into the jackpot opening. The aiming guide is automated but can also be controlled from within the app.
I've modified my Boost hub to be powered from an AC wall adapter. This module was surprisingly reliable and ran for many hours throughout BrickCon 2018 that took place in Seattle earlier this year.
#LegoGBC #GreatBallContraptionBrickCon 2018 - Lego GBC Additional FootageGreat Ball Pit2018-10-11 | Some additional footage of the Great Ball Contraption at BrickCon 2018 that took place in Seattle, Washington. You can hear how loud it gets in the convention hall during public hours.
#LegoGBC #GreatBallContraptionBrickCon 2018 - Kevin Mitcham GBC LoopGreat Ball Pit2018-10-10 | Following the blue ball through Kevin Mitcham's GBC Loop on day 4 of BrickCon 2018 in Seattle. Kevins "Great Bat Contraption" Won the Contraptionist Trophy at this event. Also seen in this loop is Dave De Gobbi's Waterwheel which won the "Rookie of the Gear" award.
#LegoGBC #GreatBallContraptionBrickCon 2018 - John Sherman GBC LoopGreat Ball Pit2018-10-09 | A video following the blue ball through John Sherman's GBC Loop on day 4 of BrickCon 2018 in Seattle. John's Up and Over module won the "Iron Baller" trophy at this event.
#LegoGBC #GreatBallContraptionBrickCon 2018 - Great Ball Pit GBC LoopGreat Ball Pit2018-10-09 | Here is a video of the closed loop I had running on Sunday morning at BrickCon 2018 in Seattle, Washington. 8 Modules are running in this loop including my new Lego Boost Pachinko module. Also shown is the GBC Trophy that was awarded to my Greylime XL module.
#LegoGBC #GreatBallContraptionLego GBC Module - WhirligigGreat Ball Pit2018-09-07 | Whirligig, a Lego #GreatBallContraption Module. This small #LegoGBC module moves balls along quickly with it's rotating axles. It could easily integrate with a shared power system. I've added some 40 year old Technic Gears onto the side for decoration.
#LegoGBC #GreatBallContraptionLego GBC Module - Tri-Sep V2Great Ball Pit2018-08-21 | Tri-Sep V2 a Lego Great Ball Contraption Module. Tri-Sep V2 is the second iteration of the Tri-Sep module. I have improved the input bin and conveyor, as well the module can now recirculate. This module now uses 1 motor instead of 2.