Knotting Knots
Anchor Bend or Nilsson Knot How to Tie
updated
This video is just a very quick view of the machine being put through its paces to produce 6mm polished hemp. There are plans to produce future videos demonstrating the full setting up procedure and detail on how the rope is made.
Some of the technical stuff that you may be asking, regarding this Rope Making Machine and the production of Polished Hemp.
What wax is used for polished hemp? Often beeswax or tarred beeswax is used.
Technical Information:
After intensive use of my old rope machine, there was wear and tear, also because I had the need to make very long ropes (100 meters) with a thicker diameter. My old machine also can't handle the weight of both the length of the rope and of the sled. The machine could also only turn clockwise otherwise the screw thread would come loose
That is why I have something new and much more robust ...
So I asked a colleague at work in the mechanical department if he could help me with that because my background is very different, I also knew that working with gears is very precise work.
I told him what my needs were to have a good machine. The conditions are a:
- Can rotate both left and right
- Robust, so can move a lot of weight (over 250 kg)
- Larger hooks (to be able to use thicker yarn)
- Gears ( ratio 1:3 )
- Mobile
- a recoil protection for both left and right turning (ratchets)
- Operation must be both with a motor and drill and by hand
- A good table that can take a lot of weight and can't tip over....
He set to work with these conditions and the result is impressive, if I do say so myself.
For the weight I use tiles each 22 KG heavy that I can store under the table.
The hooks are M16 - 65 mm in size.
To prevent the table from tipping forward, I use two extra legs that are 45°, at the foot of those legs there are plates with a hole. the hole is for putting in an iron tent pole and the other plate is for when I am standing in grass, it can pull itself into the ground.
The machine itself weighs 26 kg and is about 30 cm high.
P.S. There are no drawings or plans of the machine.
The link above will take you to Edward's contact information.
#LetsGetKnotting
Thanks to @MonotonyTV for the Royalty Free Birdsong clip. Channel Handle: @KnottingKnots
The Painter Hitch or the Tumble Hitch is a good secure way of attaching a rope to an object, this hitch also has the benefit of being quick release. Some people shy away from knots that are slipped, but I find that if the knot is dress smartly and tightly, then there is little chance of the hitch being tripped accidentally. However, as I always say, you are the master of your own knots, so the choice of course is yours.
The Painter Hitch is also a useful hitch that can easily be used on dog leads and dog leashes.
#LetsGetKnotting
Johnny Debt
I would also like to thank @MonotonyTV for any sound files used in this video. Channel Handle: @KnottingKnots
What is the Pile Hitch Used For? The Pile Hitch is a very simple way of securing an object to a stanchion. This is not a permanent way of securing an object, as it may need adjusting on a regular basis. If say for example you have a line from a dingy and you want a quick tie and then quick release way of securing it, then the Pile Hitch will work well for that. Just remember that it does need checking on a regular basis. A good way of attaching a mooring line to a post.
How to Tie the Pike Hitch: The great thing about the Pile Hitch, is that it can be tied in the bight of a rope. Simply take a bight of rope or line and pass it round the object; take the bight and pass it under the standing part; then pass the bight up and over the stanchion,
#LetsGetKnotting Johnny Debt
I would like to thank @MonotonyTV for any background sounds within the video.
Finally, @WhyKnot please drop me a line. Channel Handle: @KnottingKnots
The Halter Hitch is basically a version of the Overhand Knot that is slipped This then makes it a very good general purpose slipped hitch. I think I personally prefer the Evenk Hitch as an easier method of tying something up. I guess it is just how you get used to using certain knots. How to Tie the Evenk Hitch: youtu.be/bF_DZ1uqX7U
According to Ashley's Book of Knots; The Halter Hitch is used on horses all over the world. It is basically a very quick and simple way of hitching an animal to a post. The down side, which is often told to me, is that some animals are rather clever and can easily undo this particular hitch.
#LetsGetKnotting
I would like to thank @MonotonyTV for any sound files used in this video. Channel Handle: @KnottingKnots
This particular version of the Ossel Hitch was take from Art of Knotting and Splicing, by Day; United States Naval Institute, page 112. It goes on to say:
What is the Ossel Hitch Used For? If a net is made with backing short lines, Ossels are used to connect the back and the headrope. This book then goes on to refer to the 1939 edition of Spencer's Knots. I am not even going to pretend I understand exactly what backing short lines are............. but I think I get an idea. Maybe a fisherman reading this can make a comment below about how the Ossel Hitch is used.
My initial observations from tying this knot was, it is not too dissimilar to the Camel Hitch or a variation of the rolling hitch.
I have not made a video on the simple version of the Ossel Hitch, but you can find it on the @WhyKnot channel.
#LetsGetKnotting
Johnny Debt Channel Handle: @KnottingKnots
This 6 Strand French Sennit would look good as part of a neck knife lanyard, gun dog lanyard, or could also be used as part of a project to decorate a rope picture frame.
The formula for tying this particular 6 Strand French Sennit is; Far right weaves under, over, under, over and under to the far left. Now take the next far right and repeat the process. Then keep doing this and you will end up with a very decorative 6 Strand French Sennit.
The original Sennit is shown in on of my favourite books, Creative Ropecraft, by Stuart E. Grainger. I have to say although this book does not have the most projects, etc. it always seems to fall open on just what I was looking for.......... if you understand what I mean.
Johnny Debt #LetsGetKnotting
I would like to thank @MonotonyTV for any sound files used in this video. Channel Handle: @KnottingKnots
In this video you will learn How to Tie the 4 Strand Round Sennit. This particular Four Strand Round sennit is often used when creating long knife lanyards, a decorative weave incorporated in say a neck lanyard or anywhere else that you want to use a very decorative four strand sennit.
The formula for this four strand sennit is relatively easy. I find it best to do the required amount all in one go, thereby keeping the everything constant. As you are creating this particular weave, it is best to try and keep the tension constant, so as to get a wonderful uniform finish.
#LetsGetKnotting Johnny Debt
I would like to thank @MonotonyTV for any sounds that have been included in this video.
Still calling @WhyKnot what are you up to these days?
Art of Manliness Channel Handle: @KnottingKnots
This particular knot is listed in Ashley's Book of Knots as knot number 526, it also goes onto mention how this knot was discovered in Chapter 1 Page 7.
How to Tie the Oysterman's Stopper Knot - AKA Ashley's Stopper Knot.
I would like to thank @MonotonyTV for any sound clips used in this video.
#LetsGetKnotting
Johnny Debt
@WhyKnot were are you mate? Channel Handle: @KnottingKnots
I did find with this particular 6 Strand Sennit, it was a little more difficult to achieve a good even finish. I wonder if, my cordage that I am using is starting to loose it's hard lay qualities, or I was a little to keen to get through this project?
The formula for this 6 strand sennit is as follows; Split the leads into two sets of three (left and right), far left lead over one, under one and then to the bottom right. The far right lead is then passed under one and over two and becomes the bottom left lead.
This particular 6 Strand French Sennit is often used when creating say, decorative knife lanyards, neck lanyards or even as part of a decorative surround on a picture frame.
#LetsGetKnotting Johnny Debt
I would like to thank @MonotonyTV for any sound files used in the making of this video.
I often wonder what Tom from @WhyKnot is doing these day?
I wonder if they video is classed as @artofmanliness ?
How to Tie a 6 Strand French Sennit Brion Toss Version Channel Handle: @KnottingKnots
What is the French Sennit used for? It can be used for a number of things, such as part of a decorative neck lanyard, or one of the weave used when making a decorative knotted picture frame, or even on its own as the main part of a decorative knife lanyard.
Four Strand French Sennit Formula: Right Hand Cord, Under, Over, Under to the left. Then repeat this with the next right hand lead.
#LetsGetKnotting
Johnny Debt
I would like to thank @MonotonyTV for any additional sound clips used in this video. Channel Handle: @KnottingKnots
In this video you will learn how to tie a 5 strand plait that is flat. The end result is a very pleasing chevron pattern running along the length of the braid or weave.
Five Strand Plait Formula: Outside right over two to centre, outside left over two to centre, and then repeat.
What is the flat Five Strand Braid used for? The pleasing pattern would make a lovely addition to a neck lanyard. This of course could be combined with other decorative knots to make a lanyard that stands out in a crowd. This would also make a good plait, braid or weave to add to the surrounds of a knotted picture frame.
Johnny Debt #LetsGetKnotting
I would like to thank @MonotonyTV for any additional sound effect in the video. Channel Handle: @KnottingKnots
Weave Formula: Outside Left Pair, Over Two to Centre, Outside Right Pair, Over Two to Centre and then repeat.
TOP TIP: I often find that when braiding any cordage, the first couple of weaves can be a little messy. So what I do is to do a couple of extra weaves, so that eventually the slightly scruffy bit can be avoided.
Also, it can often be difficult to calculate the correct amount of cordage to use. For a simpler braid or weave, I estimate for every inch of weave, I will require about 1 foot of cordage. A more accurate way of calculating the amount of cordage required, is to do a short section, to see how much line has been used. Then you can multiply that for the overall length that you want to achieve.
With any form of plait, braiding or Sennit, it is always best to go at a nice gentle pace and keep the tension in your lines at a constant. Always check to make sure that as your weave the line, there are no unwanted crossings of the line.
This has been taken from: Creative Rope Craft by Stuart E Grainger (Superb little book 😉 😉 😉 )
#LetsGetKnotting
Johnny Debt
With thanks to @MonotonyTV for any background sounds used in this video. Channel Handle: @KnottingKnots
The Figure of Eight Bend is a great way of securely joining two ropes together.
What is a Bend in Rope? Often when two ropes are joined together, it is known as a bend, therefore we have a Figure of 8 Bend, as both ropes are joined together using the Figure of Eight Knots.
What is the Figure of Eight Bend used for? It is a good secure way of joining two ropes together. However, if used for critical loads, the the two working ends should be longer than those shown in the video. Also, for additional security, the two working ends can be tied off to the standing part of the opposite rope. The Figure of Eight Bend is best suited when the two ropes are of equal size.
The Figure of 8 Bend if dressed correctly is not too difficult to undo, even if the ropes have been heavily loaded.
#LetsGetKnotting
Johnny Debt
@MonotonyTV Channel Handle: @KnottingKnots
In this particular video you will learn how to tie the Marlin Spike Hitch using a Marlin Spike or a Fid. The wonderful thing about the Marlin Spike Hitch is that when tied with a marlin spike, it makes a great way of being able to pull a rope with the assistance of the Marlin Spike.
Ashley's Book of Knots says: "2030. The Marlingspike Hitch is always used for heavy heaving on splices, seizings and service. To tie the knot: With the marlingspike in the right hand, lay the point across the marline and with the left hand add a turn of marline around the tip. Lift the spike and place the tip to the right of the standing part and slip it under the bight." So if you want a quick and effective way of heaving on a line, then the Marlin Spike Hitch will do the job!
When making a temporary rope ladder, the marlin spike hitch can be used to create a rope ladder: youtu.be/Wa4uyMp1B6E?t=219
#LetsGetKnotting
Johnny Debt Channel Handle: @KnottingKnots
Maybe we could start a revolution and spread the word about the qualities of the Lobster-Buoy Hitch?
#LetsGetKnotting Johnny Debt Channel Handle: @KnottingKnots
Having played around a little with this hitch, I do love the security that this hitch offers. As the working end is first of all tucked under the three turns, then again under the final turn, tension on the line makes this hitch grip exceptionally fast. I would say that perhaps this knot could be a little difficult to undo if heavily loaded. There is the option to slip this hitch, but I am not sure that it would help a great deal. If you have had experience of using this particular version of the Halyard Hitch, then please do leave a comment below.
#LetsGetKnotting Johnny Debt Channel Handle: @KnottingKnots
What is the Triple Loop Bowline used for? The Triple Loop Bowline is used in emergency rescue situation, where there is a need for three loops to act as anchor points. Also all three loops can be adjusted, prior to use. The Triple Loop Bowline can also be used as an improvised sling chair.
#LetsGetKnotting
Johnny Debt Channel Handle: @KnottingKnots
There may be times when you want to tie a simple knot around the throat of a sack, in order to lift it or hang it out of the way.
@Timothy Smallwood Suggested: "Not having a sack I tried this successfully on a tea towel! I reckon it would also be useful for grabbing the corner of a tarpaulin when making a shelter."
The Sack Lift Knot is so quick and easy to tie. Also by using the this sack lift knot, the throat of the sack is folded, thereby sealing the sack better.
How to Lift Sacks
How to hang and store sacks
#LetsGetKnotting
Johnny Debt Channel Handle: @KnottingKnots
The Ashley's Book of Knots shows two Spanish Bowlines being used at either end of a ladder to suspend the ladder (202). The Spanish Bowline is also shown as an emergency sling to lift an unconscious person (265). Each leg of the person is passed through each loop. Then a hitch is made under the persons arm pit, against their chest. Then the injured person can be raised or lowered to safety.
The advantage of a Spanish Bowline over say a Bowline in the Bight, is that the two loops formed are splayed or forked apart. How to Tie the Spanish Bowline Quick Tie Method
#LetsGetKnotting
Johnny Debt Channel Handle: @KnottingKnots
Thanks to Michael Daniels The timber hitch is the knot used to tie classical guitar strings onto the bridge of the guitar. It can also be used to attach nylon or gut banjo strings to antique style tailpieces.
The Timber Hitch is just a delight to work with, as it is easy to tie, grips fast an object and does not jam and therefore easy to untie.
The Timber Hitch is also known as the Bowyer's Knot, as it is used to attach the end of the string to a longbow.
Often when used for moving long poles of logs, the Timber Hitch is tied first and then followed by one or more half hitches (Killick Hitch). This allows the operator more control over the object being pulled.
#LetsGetKnotting
Johnny Debt Channel Handle: @KnottingKnots
The other great thing about tying the Zeppelin Bend is that it is very easy to recognise and spot if it has been tied wrong. The Zeppelin Bend is also resistant to loading and unloading and also from shacking.
The Zeppelin Bend is also known as Rosendahl Bend or Knot.
Johnny Debt
#LetsGetKnotting Channel Handle: @KnottingKnots
The Kalmyk Loop is often used by bushcrafters as this loop knot is very easy to tie and as it is slipped, it is extremely easy to untie. It is possibly an alternative to the Bowline?
#LetsGetKnotting
JohnnyDebt Channel Handle: @KnottingKnots
As shown in the video, the Weaver's Knot is the same structure as the Sheet Bend. However, they are tied differently. When tying the Sheet Bend in yarn, it can be rather difficult to tie, using the Weaver's Knot method, just makes it a little easier to create the knot.
I have found that when making a fishing net, some of the netting twine can be a bit slippery. So as mentioned above, give the knot some tensioning and then slacking to see if it works loose. If you find that no matter what knot you use, just put a little dab of finishing solution on the knot and let it dry. Here is a video to the finishing solution that I use, not just for protecting rope work, but also for locking up knots nice and tight.
#LetsGetKnotting
Johnny Debt
Net Making Knots
Weaver's Knot Intro 00:00
Tying the Weaver's Knot 00:50
I wonder if my favourite sewing channel @Studio7t7 uses this knot? Channel Handle: @KnottingKnots
The Highwayman's Hitch is easy to tie and fairly secure. However, some people have said that a clever horse knows how to untie this hitch. When the Bank Robber's Knot needs to be untied, just one tug on the working end and the knot falls free from the spar or ring.
This hitch can also be used when mooring, it can be tied in the bight and the working end can be lead to the stern of the boat, thereby creating a remote release for this hitch.
According to Art of Knotting and Splicing, by Day; United States Naval Institute "Hal McKail says that Dick Turpin is supposed to have invented this hitch"
Some people say that the Painter Hitch is the Highwayman's Hitch, and vice versa, however, there is a slight difference between the two hitches.
The Highwayman's Hitch is very easy to tie, you just need to remember; a bight, then another bight passed through the bight, then a third bight passed through the last bight.
*Remote Release Lift Hitch* have you seen or tried this one yet? youtube.com/watch?v=4q-WPaCQAZs&list=PL7nysDkNnZHc0Tba3EGCagrhA44Mu-MjO&index=4
Johnny Debt
##LetsGetKnotting Channel Handle: @KnottingKnots
The Double Dragon Loop is considered by many to be a superior loop knot compare to many other loop knots. One great advantage of the Double Dragon Loop is that it works extremely well in slippery rope such as Dyneema. Although I have not tested this, it is said that the Double Dragon Loop is relatively easy to untie, even if the knot has been heavily loaded.
I wonder if the is a good Bowline alternative.
Johnny Debt
#LetsGetKnotting Channel Handle: @KnottingKnots
in Art of Knotting and Splicing, by Day; United States Naval Institute , the single not version is known as the Fisherman's Knot, the Lover's knot, the Waterman's Knot and the Water Knot. However, when tied with a double turn as shown in the video (or an additional third turn), then this is also known as the Grapevine Knot.
The Double Fisherman's Bend is a great way of joining two lines together. However, it is said that this bend can be prone to jamming if heavily loaded.
Another great use for the Double Fisherman's Knot is when you want to make a lanyard or bracelet that can easily be adjusted by adding or releasing tension on the Double Fisherman's Bend. Channel Handle: @KnottingKnots
The Celtic Button Knot can also be used to make Ranger Beads on a lanyard. There is a video here on how to make a Ranger Bead Lanyard: youtu.be/gOhzWK9CSIs So if you want a knot that moves up and down a lanyard, this one will do the trick.
Single Strand Diamond Knot for a knife lanyard.
Celtic Button Knot for a knife lanyard.
Johnny Debt
#LetsGetKnotting Channel Handle: @KnottingKnots
What is the Ground-line Hitch used for? According to Geoffrey Budworth; this makes a great alternative to the Clove Hitch; this particular hitch has also been used on nets to trawl the seas for cod.; it has also been adopted by the US Cavalry as a Picket Line Hitch. This is a very versatile hitch that can be attached to a good anchorage point and will hold up well on a right-angled load.
One downside to the Ground-line Hitch is that is does not behave well when the rope is swinging. So for a static load this is a great little hitch to use. Some people may also know this as a Spar Hitch
#LetsGetKnotting
Johnny Debt Channel Handle: @KnottingKnots
What is the Honda Knot for? The Honda Knot is often also referred to as the Lasso Knot. In order to make a Lasso, then it is suggested that a hard lay or above average stiffer rope is used to make the Honda Knot. The long end is then passed through the loop in order to create a lasso.
In a previous video I did on the Honda Knot, some commenters have also suggest that as this knot is easily adjustable, they use it as a bowstring knot. I am sure that some archery people will leave a comment and tell me if this is correct or not?
#LetsGetKnotting
Johnny Debt
The Lasso Knot or Lariat Knot Channel Handle: @KnottingKnots
Now that I have said that, the Imitation Slipped Bowline suits my needs as an alternative to the Bowline or any other fixed loop knot. I am sure that there are others that are concerned about the slipped element of the knot. You are the master of your own knots, so you decide what knot suits you and your situation best!
If every you need a fast tie and quick release knot, the the Imitation Slipped Bowline makes a good knot.
Johnny Debt
#LetsGetKnotting Channel Handle: @KnottingKnots
Art of Knotting and Splicing, by Day; United States Naval Institute , was my guide when I first learnt about this knot.
How to Tie the Jury Mast Knot - How to Tie the Jury Masthead Knot was used to create this video.
Ashley's Book of Knots 1167 says the following; 1167. The Masthead Knot or Jury Mast Knot is often found within “fancy knots.” Mainly because it is decorative, also this knot is not often used for practical purposes. The original use for this knot was to form strap around a temporary masthead to which stays could be held tightly. The knot has good binging properties and offers several loops to which the stays are secured with Becket Hitches.
I personally think that the Jury Mast Knot is a useful one to know, as there are often times when a heavy awkward load does need shifting.
The Jury Mast Knot can also be made into a decorative mat: youtu.be/3nVUiEW7JZM
Johnny Debt
#LetsGetKnotting Channel Handle: @KnottingKnots
The Double Dragon Loop Knot, is not as well known as other loop knots. However, it is often considered by those in the know, to be a superior loop knot compared to some others. When the Double Dragon Loop is tied just as a loop knot, it is relatively easy to tie. It does become slightly more complex when tied around and object. Perhaps this is why this particular Loop Knot is not as well known.
What is the Double Dragon Loop Used For? When tied the Double Dragon Loop is an extremely secure loop knot, it also has the advantage of being a secure loop in slippery ropes, such as Dyneema. It is also said that the knot can be loosened relatively easily if the knot has been loaded.
#LetsGetKnotting
Johnny Debt Channel Handle: @KnottingKnots
How to Tie a Reef Knot: youtu.be/xsXv_fR7ecU
Why Mouse a Hook? One of the main reasons for mousing a hook, is so that if you are using a lifting strop, it will not part from the hook when there is no load on the hook.
According to Ashley's Book of Knots; When a hook is used to lift a considerable load, the hook should be moused. This is done by using a length of Marline, which is doubled and then a Bale Sling Hitch (Cow Hitch) is put onto the hook.A number of turns are then passed around the back and the bill of the hook in opposite ways. The two end then meet in the middle of the hook and then Frapping Turns are added in both directions, from the centre outwards. The Riding Turns are added, till the Marlin meets back in the middle. Finally this is tied off using the Reef Knot.
Mousing a Hook then serves two purposes, one, strengthening the hook, two, preventing the hook from spilling. Perhaps in these modern times, Mousing a Hook will not help strengthen the hook?
Mousing a Hook 00:00
Tying the Bale Sling Hitch 00:43
Adding Turns to the Hook 01:50
Adding Frapping Turns 04:36
Adding Riding Turns 09:01
Tying the Reef Knot 10:44
#LetsGetKnotting
Johnny Debt Channel Handle: @KnottingKnots
In testing the Remote Release Lift Hitch I have found that both Versions of this knot do work well, but the following things need to be considered prior to using this hitch:
1. Do not use, if there is somebody underneath the load or there is a possibility that somebody could accidentally walk under the load.
2. Do not use this hitch if your load can easily be damaged.
3. Test whether or not Version 1 or Version 2 of this knot suits your type of rope best. I have found that in some ropes, both Versions of this knot work well. However there are other ropes where Version 2 is more suitable.
4. Dress and tighten smartly, then make sure that there is tension on the line at all times. When the tension is taken off the knot/rope this hitch can then fail.
What is the Remote Release Lift Hitch used for? There are often times where you may be aloft and you need to lower say, a buckets with your tools, or coiled cables to the ground below. By using the Remote Release Hitch you can lower your object, then when it touches the ground, you can shake the rope and the knot releases, lift the rope ready to lower another object to the ground. This certainly saves you a lot of climbing up and down a ladder, or for a second person to untie this knot.
The advantage of Version 1 is that it is easier to shake the hitch free once there is slack in the rope. With Version 2 it is less prone to come loose, but does need an extra couple of shakes to release.
Remote Release Hitch Intro 00:00
Remote Release Hitch Version 1 00:21
Remote Release Hitch Version 2 02:24
Johnny Debt
#LetsGetKnotting Channel Handle: @KnottingKnots
The Transom Knot is similar in construction to the Constrictor Knot, like the constrictor knot, it will hold an object extremely tightly at right angle.
If you happen to be a bushcrafter and wanting to build a shelter, then this knot could be just for you. There will be times that you need to lash poles together at right angles and this knot will hold them firm.
Maybe if you want to lash your torch to a tent pole, then the Transom Knot can help with this task. These are just a few examples of what the Transom Knot is for.
Johnny Debt
#LetsGetKnotting Channel Handle: @KnottingKnots
The Falconer's Knot is not really the name of the resulting knot, but the way in which it is tied. The problem is that when a bird is sat on one hand, you really need a knot that can be tied just with the other hand. So this rather ingenious solution came about, when a noose knot that is slipped can be tied with one hand.
Just because it is called the Falconer's Knot, does not mean that it should only be used to tether a Falcon. There may be a time where you do need to tie a knot with one hand, so maybe it is worth taking a look at the Falconer's Knot.
Slipped Noose Knot that is quick tie and quick release. If you are worried about the knot being tripped accidentally, you can pass the working end back down the final bight, to prevent it from tripping.
Johnny Debt
#LetsGetKnotting Channel Handle: @KnottingKnots
I personally love the Evenk Hitch also known as the Siberian Hitch of the Siberian Evenk Hitch. I personally know this as the Evenk Hitch. The reason that I love this noose knot is that it is so easy to tie. The Evenk Hitch also has the advantage of, that it can be tied whilst wearing gloves. So if you are out in the cold wearing thick gloves, then give this noose knot a go!
What is the Evenk Hitch Used For? From what I understand the Evenk Hitch was originally used as a noose knot on reindeer. However, the Evenk Hitch is such a useful noose knot that it can be used almost anywhere where a quick tie and release knot serves the purpose. If you are worried about the slip knot being tripped, then just pass the working end through the last bit rather than the bight of the rope.
The Siberian Evenk hitch is basically a figure of eight knot tied around the standing part of a line. Even thought the Evenk Hitch is slipped, if well dress and tightened correctly this knot has proved to be very reliable for me.
Quick Tie and Release Noose Knot, slipped noose knot.
Johnny Debt
#LetsGetKnotting Channel Handle: @KnottingKnots
This knot is more commonly known as the Reever Knot, but I would say as it is you to join two ropes together, it should be called the Reever Bend.
The secure aspect of this knot is that each line going in and out of this knot are clamped at two points. Therefore, the Reever Knot has excellent security properties and it less prone to shake loose when subjected to intermittent loads. The Reever Knot can be consider as one of the best knots for joining two ropes.
The Reever Bend is very similar to the Vice Versa Bend.
Another advantage of the Reever Knot is that it is a very streamlined knot and also decorative to look at.
#LetsGetKnotting
Johnny Debt Channel Handle: @KnottingKnots
What is the Surgeon's Knot used for? The Surgeon's Knot or Ligature Knot can be used for binding things together. It is similar to the Reef Knot, but tied with an extra turn on the first part. This gives additional resistance (preventing slippage) when pulling up tight, before the second part of the knot is tied.
Surgeons Knot for Net Making: I personally find this a useful knot to use when net making. When I start to run out of cordage, I tie on a new length using the Ligature Knot or Surgeon's Knot. There are times when a simple Weaver's Knot or Sheet Bend can come undone too easily. So the Surgeon's Knot is good for joining two ends of netting twine. The other reason that I like the Ligature Knot is that it is very easy to tie when you have two rather floppy and fiddly ends of line to join together.
Stop your laces coming undone - If your laces keep coming undone, then try the using the first part of Surgeon's Knot, then finish with a bow as usual.
Ashley's Book of Knots goes on to say the following about the Surgeon's Knot: 1209. The Ligature Knot is commonly called by laymen the Surgeon’s Knot. But surgeons do not speak of the “Surgeon’s Knot” any more than a sailor would speak of a “Sailor’s Knot.”
I personally use the Ligature Knot a great deal, I just like the additional security that the knot offers over the Reef Knot.
For More Less Chat Knotting Videos: youtube.com/playlist?list=PL7nysDkNnZHc0Tba3EGCagrhA44Mu-MjO
#LetsGetKnotting
Johnny Debt Channel Handle: @KnottingKnots
If your rope has been damaged, you can not tell how much strength has been lost from the rope. However, if you bypass the damaged section of rope with the Alpine Butterfly Bend or Alpine Butterfly Loop, you can still calculate how strong your rope is.
The reason that I think using the Alpine Butterfly Loop is best knot for bypassing a damaged section of rope, is because it is a very strong and secure knot. If you do an internet search on Strength of Knot Chart, you will see that the Alpine Butterfly Bend rates very highly. When you tie any knot in a line, that knot will reduce the overall strength of the line by a certain percentage. The Alpine Butterfly Knot will only reduce the strength of a line by 25%. Often people would say you can use a Sheepshank, but one major problem with the Sheepshank Knot is that it can easily shake loose if not under a constant load.
I would like to add that a damaged rope should only be repaired in this way in an emergency. Never use damage rope if there is a critical load or if the rope breaking can cause injury to yourself or others. A DAMAGED rope is DANGEROUS!
Bypass Damaged Rope Intro: 00:00
Tying the Alpine Butterfly Loop: 01:14
Johnny Debt #LetsGetKnotting Channel Handle: @KnottingKnots
How to Tie the Sack Knot or How to Tie the Bag Knot
Sack Knot or Bag Knot Fast Tie Sack Knot Miller's Knot Alternative.
In this video tutorial you will learn a really fast way of tying a bag shut. Not only that, this particular sack knot is also quick release.
In previous videos I have shown how to tie the Sack Knot or Miller's Knot, but this one is slightly different and I think a little quicker to tie and untie. You can find here the How to Tie the Miller's Knot: youtu.be/n-DtbFTd-7M
There are often times when you need to tie up a bag, so you will find this particular bag knot very useful.
How to Tie the Bag Knot: 00:00
How to Tie the Bag Knot Slow Motion: 01:47
Johnny Debt
#LetsGetKnotting
You will find these Knots for everyday use
Practical useful knots for daily use
Knots worth knowing Channel Handle: @KnottingKnots
Another good tip is, if you are constantly removing the Pin, then why not attach a lanyard between the Shackle and the Pin, there is an example photo here: youtube.com/channel/UCxfS18VYnZgg2rrJgzuX98w/community?lb=UgzaMfip9fjjS9LSWzZ4AaABCQ
Often when people think of Mousing a Shackle, you often think of mousing the Shackle Pin to the body of the shackle, this will then prevent the shackle pin from coming loose. The Pin can also be moused using the same knots as described in the video.
A similar technique is used when Mousing a Hook
The knots and techniques that you will learn in this video is, Bale Sling Hitch, Turns Around Shackle, Frapping Turns, Riding Riding Turns and the Reef Knot
How to Tie a Reef Knot: youtube.com/watch?v=xsXv_fR7ecU&list=PL7nysDkNnZHc0Tba3EGCagrhA44Mu-MjO&index=10
Mousing a Shackle Intro 00:00
How to Tie the Bale Sling Hitch 01:37
Making the Turns Around the Shackle 03:03
Frapping Turns 05:16
Riding Turns 10:20
Reef Knot 12:28
#LetsGetKnotting Channel Handle: @KnottingKnots
In this video you will learn how to just tie the Eskimo Bowline. This will be just on Just the Knot Less Chat, as some people want to learn a knot and then off into the world and use that knot in real life applications.
The Eskimo Bowline is also known as the Reverse Bowline or the Anti-Bowline.
The Eskimo Bowline is useful for when the loop will be stretch wide when loaded.
What is the Eskimo Bowline Used For?
The Eskimo Bowline when tied creates a fixed loop at the end of a line. When compared to the standard Bowline, it is less prone to shake loose.
Eskimo Bowline Alternative, other knots worth considering are; the Imitation Slipped Bowline, Hanson Loop Knot or the Double Dragon would be good alternative loop knots.
Johnny Debt
#LetsGetKnotting
How to Tie the Eskimo Bowline 00:00
Eskimo Bowline Slow Motion 01:17 Channel Handle: @KnottingKnots
What is the Capstan Knot Used For? There are times where you want to tie a noose knot, then just prior to using this knot, you want to have a fixed size loop knot.
In this Capstan Knot Video Tutorial you will learn step by step on how to tie the Capstan Knot.
Capstan Knot Advantages and Disadvantages - If you have used the Capstan Knot in real life situations, then please do let me know in the comments how you got on with using the Capstan Knot, also if you prefer it over the Crabber's Knot?
How to Tie the Capstan Knot a Noose Knot or Fixed Loop Knot
Part of Just the Knot No Chat series.
Tying the Capstan Knot 00:00
Tying the Capstan Knot Slow Motion 02:27
#LetsGetKnotting
Johnny Debt
This knot came from; Art of Knotting and Splicing, by Day; United States Naval Institute is is also listed in Ashley's Book of Knots Number 1831 Channel Handle: @KnottingKnots
Check out more Less Chat Knotting Tutorials: youtube.com/playlist?list=PL7nysDkNnZHc0Tba3EGCagrhA44Mu-MjO
What is a Running Bowline?
Basically the Running Bowline is a normal bowline where the standing part has been passed through the loop, to form an easily adjustable noose type knot.
You can if you want tie a normal Bowline and then once tied, the standing part can be passed through the loop of the Bowline to create the Running Bowline. However, by tying the Running Bowline in this method, you can avoid passing a lot of rope through the loop of the Bowline.
What is the Running Bowline Used For?
The Running Bowline forms a good noose knot that will not jam, the rope can easily slide through the loop, and can easily be undone after use. Ashley's Book of Knots goes on to say that it is recommended for the retrieval of lumber or rigging that has fallen overboard. When climbing, the Running Bowline can be used to retrieve objects from crevasses. The Running Bowline can also be used to secure a child's swing to the overhead branches of a tree.
How to Tie the Running Bowline 00:00
Running Bowline Slow Motion 02:29
#LetsGetKnotting
Johnny Debt
Another great channel for knotting videos: @WhyKnot with lots of practical and decorative knots.
ABoK 1117, p 204
The Running Bowline Knot is referred to by name, in A Four Years' Voyage by G. Roberts (1726), Channel Handle: @KnottingKnots
In this video on the Hanson Knot Tutorial, you will learn how to tie the knot, just the knot and no extra chat.
The Hanson Knot also known as the Hanson Loop Knot, is a really good loop knot to learn. The Hanson Loop Knot may also be a good alternative to the the Bowline.
The Hanson Knot or the Hanson Loop Knot was a very common knot that the Boy Scouts used to learn. It would seem the the Hanson Knot became unpopular, only because the Bowline was mentioned more in knotting books etc.
Some people who still use the Hanson Knot, say it is preferable to the Bowline.
To tie the Hanson Loop Knot is very simple, it starts off as an overhand knot, then the working end is passed back through to create a slip knot. The working end is then passed over the standing part and then up through the centre of the knot, finally it is woven over then under to end up running parallel to the standing part. The Hanson Knot is relatively easy to learn, and easy to untie.
Johnny Debt
#LetsGetKnotting
How to Tie the Hanson Knot 00:00
How to Tie the Hanson Knot Slow Motion: 02:56 Channel Handle: @KnottingKnots
This could be an alternative to the Sheet Bend, as there is an extra turn when creating the Double Sheet Bend with a Single Tuck.
You may want to consider the following as alternatives to the Sheet Bend:-
How to Tie the Sheet Bend: youtu.be/KDJGSyXZOww
How to Tie the Double Sheet Bend 2 Tucks: youtu.be/gMaNUJC56Z4
How to Tie the Sheet Bend One Way: youtu.be/T_q5iRdswlg
How to Tie the Simple Simon Bend: youtu.be/pNj3cx93_uA
The if you like the qualities of the Sheet Bend but you are slightly concerned about security, then some of the above may offer a better solution.
One thing to remember with all Sheet Bends, when tying, make sure that the working ends of both ropes are on the same side. Sheet Bends can also be slipped, if you require a quick release sheet bend.
What is a Bend? In practical knotting terms, when you join two ropes together, this is referred to as a bend.
How to Tie the Double Sheet Bend 1 Tuck Method 00:00
How to Tie the Double Sheet Bend 1 Tuck Method Slow Motion 01:34
Johnny Debt
#LetsGetKnotting Channel Handle: @KnottingKnots
In this video, you will learn how to tie a double sheet bend with two tucks.
Here are some alternative Sheet Bends that you may find useful.
You may want to consider the following as alternatives to the Sheet Bend:-
How to Tie the Sheet Bend: youtu.be/KDJGSyXZOww
How to Tie the Double Sheet Bend 2 Tucks: youtu.be/gMaNUJC56Z4
How to Tie the Sheet Bend One Way: youtu.be/T_q5iRdswlg
How to Tie the Simple Simon Bend: youtu.be/pNj3cx93_uA
How to Tie the Double Sheet Bend 2 Tuck Method Just the Knot Less Chat
What is a sheet bend used for? A sheet bend is a very simple way of joining two ropes together. The two ropes that are joined can be of different sizes. The larger rope is formed into a bight, then the smaller rope wraps around the larger rope to create the sheet bend. Often a sheet bend is used to drag cables through narrow pathways. The advantage of the Sheet Bend is that it has a low profile knot.
The thing to remember with the sheet bend, once the sheet bend has been tied, both working ends of each rope should be on the same side. If the ropes come out on different sides, then the sheet bend has been found to be less secure.
One problem with a sheet bend is that there needs to be a constant tension on the line, otherwise the sheet bend could fall apart. With the Double Sheet Bend, you do get a little extra security.
Double Sheet Bend Twin Tuck Method
Johnny Debt #LetsGetKnotting
Bushcraft Knot
Sailing Knot
Double Sheet Bend Start: 00:00
Double Sheet Bend Slow Motion: 02:04 Channel Handle: @KnottingKnots
What is the Sheet Bend Used For? The Sheet Bend is a good way of joining two ropes of equal or different sizes together. When creating a Sheet Bend, the larger rope is formed into a bight and the smaller rope is then tied around the larger rope to form the bend. For additional security, there is also the
You may want to consider the following as alternatives to the Sheet Bend:-
How to Tie the Sheet Bend: youtu.be/KDJGSyXZOww
How to Tie the Double Sheet Bend 2 Tucks: youtu.be/gMaNUJC56Z4
How to Tie the Sheet Bend One Way: youtu.be/T_q5iRdswlg
How to Tie the Simple Simon Bend: youtu.be/pNj3cx93_uA
Double Sheet Bend 1 Tuck:
The Sheet Bend works extremely well when there is a constant load, however when the Sheet Bend is not loaded, it is possible that it could easily come undone.Also when creating a Sheet Bend, it should be remembered that, the working ends of both ropes should be on the same side. This is more secure than if the ends are on opposite sides.
The Sheet Bend is also known as the Weavers Knot, as it has a low profile and is secure in many types of yarn. I also use this in certain lines when creating a fishing net.
If you think that the sheet bend may be too insecure, then maybe you would be interested in an alternative to the Sheet Bend. Here is a link to the Simple Simon Bend, that may just be the extra security you are looking for in a simple bend. youtu.be/pNj3cx93_uA If you are a sailor, bushcrafter or just a general knotter, then the Sheet Bend will be a useful bend to know. The Sheet Bend is also a knot that all Sea Cadets Learn.
Johnny Debt
#LetsGetKnotting
How to Tie the Sheet Bend 00:00
How to Tie the Sheet Bend Slow Motion: 01:33 Channel Handle: @KnottingKnots
In this Tutorial on how to tie the Carrick Bend you will learn how to tie just the knot and less chat. As stated above there is a more detailed Carrick Bend Instructions.
In Ashley's Book of Knots it mentions the Carrick Bend 1429 the carrick bend may be plaited a further length, one or more times. When the Carrick Bend it tied like this, it is often seen in trumpet cords and also in military braid on uniforms.
In Ashley's Book of Knots 1439, The Carrick Bend is also called the Sailor's Knot.
The Carrick Bend is easy to tie, it does not easily slip when the rope is wet, it is classed as one of the strongest knots, does not jam and can be relatively easy to untie. The Carrick Bend is often tied in cables and hawsers.
The thing to remember with the Carrick Bend is that it is the most secure, when the the working ends come out at opposite sides of the knot when tied.
What is a Bend? Generally it is called a bend when two rope end are tied to each other. So Carrick Bend comes under this category, as it is used to join two ends of a rope.
Carrick Bend Instructions 00:00
Carrick Bend Tutorial Slow Motion 02:01
Johnny Debt
#LetsGetKnotting
I am wondering if @SpydercoKnivesOfficial still does the Spyderco Tusk, would love to feature this in future videos? Channel Handle: @KnottingKnots