Nintendo 64 Joystick Maintenance And Repair Tips everythingdigital1 2026-09-22 | Nintendo 64 Joystick Maintenance And Repair Tips
Assassins Creed -Hidden Blade V2 Instructional Video- everythingdigital1 2024-04-01 | An old instructional tape recovered and backed up to be archived.-----------------------------------------------------------------------------------------------------------FILES ARE NOW UP WITH MINOR IMPROVEMENTS!!!" drive.google.com/file/d/1yAMhRRJYcSW8nGLSVhxycqHm6ZDQ3va1/view?usp=sharing "-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=E9Df6Ojy5OA "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Steam Deck Ssd Upgrade Guide everythingdigital1 2024-03-23 | Just another Steam Deck Ssd upgrade video with some useful commands besides that hope you all enjoy or find the video helpful. I might cover the deck one more time in the future for a package manager tutorial for like nix which is now supported. Besides that useful commands and ssd type I used in the video down below.-----------------------------------------------------------------------------------------------------------Ssd Test Command I Suggest Using Before And After Swapsudo smartctl -a /dev/nvme0n1-----------------------------------------------------------------------------------------------------------Ssd Type I Used" WD SN530 256gb NVMe M.2 SSD SDBPTPZ-256G-1012 2230 WR90F "-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=_2dfMCsok00 "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Mech Warrior 4 On Linux And Steam Deck Lutris Video Guide everythingdigital1 2024-02-20 | So in today's video I will walk you though using lutris to set up Mech Warrior 4. If you get prompted for .mono and you don't install it or the game does not work reset the prefix and install .mono.Besides that commands to install lutris and link for the write up if you wanna follow it instead is bellow. All credit for the write up goes to the original creator.-----------------------------------------------------------------------------------------------------------For debian distros use this commandsudo apt-get install lutris-----------------------------------------------------------------------------------------------------------For Arch distros use this commandsudo pacman -S lutris-----------------------------------------------------------------------------------------------------------Source and original text tutorial link" https://rexxia.notion.site/rexxia/MW4-MekTek-on-Steam-Deck-875a42fe2777434ca45a9ec0032a1819 "-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=2tPMrvrgyg0 "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Solar Panel Kit Update Also Some Future Plans For It everythingdigital1 2024-01-17 | Just wanted to give a damage update about the solar panels as well as how well it held up over all. And it's really still in pretty good shape survived 2 hurricanes and a move I had them about 6 years now. -----------------------------------------------------------------------------------------------------------And really the only damages I would like to say were caused from sun damaging the plastic and cable strain. But overall every thing works I charge my switch cameras controllers and other handhelds all the time with it. -----------------------------------------------------------------------------------------------------------I do want more flexibility so i'm making a charging hub-station something I can easily fix and would allow faster charging and have all cables at the ready and not having to use the charge controller usb at all.Another idea I had was to add a door to bottom shelf maybe.....-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=tgZhi6YPbJY "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
GBA Flashing Reproduction Cards GUIDE everythingdigital1 2023-11-14 | I have not really found a guide for how they do the batteryless modded roms on repo-cards so I figured I would make my own. I hope it helps you all out.You only need to do this is your repo card has no battery or if it doesn't have rtc. Before I get asked what if I don't patch... Well the game would work but you won't be able to save. So you either need to do these patches or battery mod your repo-card.-----------------------------------------------------------------------------------------------------------" My Personal Archive Of The Programs " drive.google.com/file/d/1IGPj_08H_ZbCb-z0cQbWTKizjnjkHXS7/view?usp=sharing-----------------------------------------------------------------------------------------------------------" gbata " digiex.net/threads/gbata-gameboy-advance-tool-rom-patch-into-remover-header-info-sram-save-patch.15059-----------------------------------------------------------------------------------------------------------" gbabf 1.2 " gbatemp.net/download/gbabf.37005" gbabf github link OUTDATED as of right now " github.com/nflsilva/nds-gbabf-----------------------------------------------------------------------------------------------------------" gba_auto_batteryless " github.com/metroid-maniac/gba-auto-batteryless-patcher/releases-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=jrz6A-pvuI0 "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Electric Candle Coherer Effect Switch DIY everythingdigital1 2023-10-24 | So this DIY is simple enough you can probably assemble it with electrical tape and some wires although soldering is still recommended and this would be a great beginner soldering project/gift. If you want to know more about why this works down below is a wiki page explaining it and a video by electroboom. If you want another simple led project be sure to click the previous video link. Stl links will be up soon I will most likely pin them in the comments since google drive links have been a bit weird for me.-----------------------------------------------------------------------------------------------------------"Coherer Wiki Page"en.wikipedia.org/wiki/Coherer-----------------------------------------------------------------------------------------------------------"Electrobooms Video"youtube.com/watch?v=VMkdnj698-0-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=6MjwehOB9MI "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Real Time Corruptor On Linux Setup⁄Guide everythingdigital1 2023-10-02 | So "Real Time Corruptor" at first glance looks rather difficult to set up on Linux but it really isn't how ever it has its caveats. Just download the RTC Launcer program and install wine and winetricks the commands are below as well as a link to my wallpaper. -----------------------------------------------------------------------------------------------------------"Real Time Corruptor Download Link With Personal Back Up Link"Official Link" redscientist.com/rtc "My Personal Back Up Link" drive.google.com/file/d/1A3OA1XUD2wcl3JsTb3xR7UMa_YW5wWAY/view?usp=sharing "-----------------------------------------------------------------------------------------------------------"Arch Linux Wine Install Commands"sudo pacman -S wine winetricks-----------------------------------------------------------------------------------------------------------"Apt Based Distros Wine Install Command"sudo apt-get install winesudo apt-get install winetricks-----------------------------------------------------------------------------------------------------------Video I am using as my wallpaper" youtube.com/watch?v=Z38TPFC5Vt0 "-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=SK1gHM6Jdnk "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Sdr Set Up On Linux everythingdigital1 2023-08-24 | So today I am gonna be showing you how to set up a dvb-t/sdr dongle on Linux. Is it easier then on Windows? In my opinion yes!!! Installing most sdr packages auto come with the replacement driver and you won't need to manually swap it like on Windows. Any way commands are down below and my previous sdr playlist if you wish to know more. Perhaps we should revisit the tempest video someday????-----------------------------------------------------------------------------------------------------------"Arch Linux Install Command"sudo pacman -S gqrx-----------------------------------------------------------------------------------------------------------"Apt Based Distros Install Command"sudo apt-get install gqrx-----------------------------------------------------------------------------------------------------------Last Video On SDR Dongles If You Wanna Learn More " youtube.com/watch?v=tthw3MtlZmQ&list=PLcR4xkmW_auhJst6gwT7OQiAjBPzdzFAV&index=42 "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Chat Gpt Local Set Up On Linux⁄Windows everythingdigital1 2023-07-16 | Not much of a setup needed for this on windows so I didn't really cover it in the video. But this video should get you up and running on Linux fairly quickly. Sorry for the video being a little long but wanted to make this simple enough anyone could follow and cover some basic's.-----------------------------------------------------------------------------------------------------------"Also I saw on the gpt4all site they are hosting non-ggml models now this program prefers the ggml models so if you come across a .bin that doesn't work... look for a .bin gmml converted version of it."-----------------------------------------------------------------------------------------------------------Get the software here " github.com/kuvaus/LlamaGPTJ-chat#gpt-j-llama-and-mpt-models "-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=6MjwehOB9MI "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Simple DIY Battery Lantern To 5v Usb everythingdigital1 2023-05-31 | Just a simple DIY for the time being thought it would be cool to have some simple projects I do that I normally don't build for a video made well into a video. There are many ways to do this and it even had plenty of room for a lipo battery but figured if I did it this way it would make for a great beginner project that wouldn't require any parts really since diodes can be sourced from anything and i'm sure you have a old cable you don't use.-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=h4n1B7CWx-c "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Battery Drain Emummc Bug Nintendo Switch IC Reset/Fix Software everythingdigital1 2023-04-25 | So this homebrew app is pretty much only suited for those who have a switch suffering from these special symptoms. Your battery drains incredibly fast but stays on for hours at 1 or 0 percent i'm talking with-in seconds... a 100% charge goes to 0% for other wise what seems like no reason. And when you turn the switch off it acts as if the battery is completely dead and won't turn on.------------------------------------------------------------------------------------------------------------Text Based Tutorial For Resetting IC-1.Copy the homebrew app to your affected sd cards I suggest putting it on all the sd cards you got with emummc set up on them.2.Boot into stock and charge battery in-till it is full don't worry if the percent drops while you turn it off.3.Boot into your emummc and then launch the homebrew app from the gallery. Again don't be worried if the batter is dropping or displaying wrong right now.4.The app will say push x to reset the IC. I suggest reading and making a note of the IC/Battery stats that will be displayed at first.5.After pushing x you should be done. You can exit the app and should be set. -----------------------------------------------------------------------------------------------------------I do recommend charging your switch to 100% before you power down. I forgot to mention that in video but it isn't 100% necessary. Just it will help keep the IC in sync with the stock HOS values.-----------------------------------------------------------------------------------------------------------Downloads" github.com/CTCaer/battery_desync_fix_nx "" personal backup will be available soon "-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=qkZD3-Zh5OA "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Opening Up And Rooting A 2nd Gen Fire TV Stick everythingdigital1 2023-02-13 | The second gen fire stick is a lot like the switch to get a custom payload pushed over we need to short some pins this task is a bit tricky so if your not able to keep the wire stable or see the points I recommend not proceeding with the rest of the guide. But once done you won't need to do it again!!!-----------------------------------------------------------------------------------------------------------After the process is done you can root or install any compatible os to the stick I will provide the Magisk zip and apk which sets up root.----------------------------------------------------------------------------------------------------------- As always my personal backup of the files I used at the time in the video will be down bellow but I recommend going to the xda forum and checking it out in case anything changes but most likely it won't.-----------------------------------------------------------------------------------------------------------XDA Forum Text Guide!!!forum.xda-developers.com/t/unlock-root-twrp-unbrick-fire-tv-stick-2nd-gen-tank.3907002Magisk Github!!!github.com/tsynik/Magisk/releases-----------------------------------------------------------------------------------------------------------Personal Back Up Of The Programs!!!" drive.google.com/file/d/1Uq1pE4tB-mu-RxsrEsRhKysqMSA87Mmh/view?usp=sharing "-----------------------------------------------------------------------------------------------------------Last Video On ADB If You Need Help With It " youtube.com/watch?v=Jis_mmaJRDI "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Adb Set Up On Linux And Simple Command Examples everythingdigital1 2023-02-11 | Forgive how disjointed this video was it was meant to tie into another video that got delayed. The commands used in the video are down below to copy and paste if you wish. Any way hope the video was able to help you out. The adb is really useful especially if your phone is broken or just want it docked.-----------------------------------------------------------------------------------------------------------TO INSTALL ADBsudo apt-get install android-toolssudo pacman -S android-toolsTO INSTALL SCRCPYsudo apt-get install scrcpysudo pacman -S scrcpy-----------------------------------------------------------------------------------------------------------Just useful commands I use!!!VIEW SCREEN WITH PHONE SCREEN OFFscrcpy -STEST THE BATTERY AND LOOK AT THE STATSadb shell dumpsys battery-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=lNhfmfQZgW8 "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Sddm Editing Adding A Video Wallpaper To Lockscreen everythingdigital1 2023-01-16 | Do all this at your own discretion!!! I do recommend backing up your themes and testing them first. Over all this isn't to difficult to do but I am sure this video will become dated so if things break i'll try my best to help. But over all I do hope you gus enjoy the video I mostly made it since I get questions about it all the time from friends.wiki.archlinux.org/title/SDDMsddm-greeter --test-mode --theme "YOURTHEMEHERE"-----------------------------------------------------------------------------------------------------------Tags To Use " drive.google.com/file/d/1d2lOI2DrCGxwkm0gWz_bLZQjb2GLY6Xv/view?usp=share_link "-----------------------------------------------------------------------------------------------------------Last Arch Linux Video " youtube.com/watch?v=6k-TfQD7KPk "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Bonelabs Simple Level Setting Up Unity And The Marrow Sdk everythingdigital1 2022-12-08 | So this video is a bit involved I haven't been on windows in a while and apparently obs got miss configured so some encoding corruption happened. I had to cut and trim around it so it isn't perfect but I wanted to show the steps from beginning to end and I think it worked out. You do need some programs but links too them will be in the bonelabs sdk documentation.-----------------------------------------------------------------------------------------------------Get Started Here " github.com/StressLevelZero/MarrowSDK/wiki "-----------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=uZeJpTQTE5w "-----------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
My Voxlab Proxima 6 Resin Printer My Setup And Tips everythingdigital1 2022-11-19 | So today I thought I would tell you guys how I have my voxlab proxima 6 set up in hopes it helps someone else get started with resin printing. Take note i'm still a novice when it comes to this but I still thought it be helpful for someone to see what all is needed to get started and what software changes you have to make to use this specific budget printer.If any one wants links to the specific models shown in the video let me know and i'll link them. Ps also replace the usb stick mine got corrupted two times...-----------------------------------------------------------------------------------------------------Chitubox Fix Instructions For Svgx Format For Newer Motherboards....1. Goto program directory locate resources2. click into resources then click into machine folder3. Find voxlab proxima 6 .cfg open it in any text editor4. Change this line "defaultSlicerExport:FDG file(*.fdg) " to defaultSlicerExport:FlashDLPrint file(*.svgx), FDG file(*.fdg)5. Go into chitubox select the printer preset which we edited.. Profit!!!This fix also lets you export as .fdg as well so you can pick between the formats.-----------------------------------------------------------------------------------------------------Get The Software Chitubox " chitubox.com/en/download/chitubox-free "-----------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=E9Df6Ojy5OA "-----------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
My Simple Yet Effective Assassins Creed Hidden Blade Gravity Knife Design everythingdigital1 2022-10-21 | I never seen anyone do a hidden blade using a gravity knife as the inspiration. Its simple yet effective compared to a otf knife it would be more reasonable to be made back in mid-evil times. I wanted them to be not to complicated for now the hinge requires enough force to break friction and gravity is enough for the blade to come out but if you wanna add magnets to increase tension I show where in the video you should put them I did test both ways the magnet is more guaranteed to catch right but I like both ways although future design will use super weak spring.-------------------------------------------------------------------------------------------------------3D Stl Download This Is Still A Work In Progress!!!DOWNLOAD " STL WILL BE UP SOON!!! "-------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=Z9EyWWi-iOk "-------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Ebsynth My Workflow On Linux everythingdigital1 2022-10-17 | The hardest thing to learn here is just ffmpeg but ebsynth it's self isn't too hard to get the hang of. But for today I cover the gui version and show some scripts I have they are not yet done but i'll update the description with them for when they are. But for now down below are the commands you need to split a 30fps video into keyframes as well as recombine the keyframes into a video.---------------------------------------------------------------------------------------------------------DOWNLOAD EBSYNTH OFFICIAL SITEebsynth.comMY EBSYNTH BACKUP" drive.google.com/file/d/18qmgApvN24bbXw3-hSx_MgIOjSl8qeEv/view?usp=sharing "MY SCRIPTSwill be uploaded here when completed!!!!---------------------------------------------------------------------------------------------------------Step 1. Split videoffmpeg -i yourvideohere.mp4 -r 30/1 %03d.jpg---------------------------------------------------------------------------------------------------------Step 2. Make folder called key edit a keyframe from split videoUse image editor of your choosing---------------------------------------------------------------------------------------------------------Step 3. Put video frames and edited key frame in ebsynth---------------------------------------------------------------------------------------------------------Step 4. Recombine edited ebsynth keyframes ffmpeg -framerate 30 -pattern_type glob -i '*.png' -c:v libx264 -pix_fmt yuv420p out.mp4---------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=6k-TfQD7KPk "---------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Mounting A Folder With Terminal On Linux everythingdigital1 2022-10-12 | So this is actually super simple to do but if you don't got the time to watch the video all you need to know are these 3 steps....-----------------------------------------------------------------------------------------------------------Step 1. List driveslsblk -----------------------------------------------------------------------------------------------------------Step 2. Command to mount drivessudo "/dev/partitonlabelandnumberhere" "where you want to mount empty folder"-----------------------------------------------------------------------------------------------------------Step 3. Command to unmount drivessudo umount /dev/partitonlabelandnumberhere-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=Au86GpXuxbM "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Ultra Sonic Privacy Sensor Simple DIY everythingdigital1 2022-09-10 | Just using 4 wires some protoboard a digispark and a ultrasonic distance sensor and a little bit of code makes this simple project work. Right now its configured like a trip wire but can easily be changed to work when you sit at your desk. The idea is you get up your light and monitor will turn off. I use linux but it can be set up with nircmd on windows. Any way I use a custom shortcut on kde "gui+shift+y" to trigger "xset dpms force off" which turns my screen off and its super effective. Also feel free to change my code fix it if need be, I'm no coder so sure my code could be vastly improved feel free to link me any improvements to my discord and i'll update also leave your name commented in the code for credit.-----------------------------------------------------------------------------------------------------------Digispark " ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=digispark&_sacat=0&LH_TitleDesc=0&_odkw=protoboard&_osacat=0 "-----------------------------------------------------------------------------------------------------------The Sensor I Used " ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313&_nkw=2pcs+Ultrasonic+Module+HC-SR04&_sacat=0 "-----------------------------------------------------------------------------------------------------------Protoboard " ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=protoboard&_sacat=0&LH_TitleDesc=0&_odkw=2pcs+Ultrasonic+Module+HC-SR04&_osacat=0 "-----------------------------------------------------------------------------------------------------------My Code " drive.google.com/file/d/1m0ByJnCrs1rf2b1tm_lPxGen5D08HD9-/view?usp=sharing "-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=F6Q-iJoh8tM "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
2 Casio Watch Mods everythingdigital1 2022-08-15 | I wish I could have done something that didn't require a 3d printer but I really do enjoy the watch mods so I wanted to make a video and get my models out there for those who have a printer... Some notes be sure to use support blockers on the sd card slot when printing.I did design something for my mvmt watch too which I showed in the video but its still a WIP so i'll list the models for that watch later. But down bellow are all the parts and models I used except for the nfc chip I wanna play with it a bit and link what I think the best one is.-----------------------------------------------------------------------------------------------------------Get smd sd card slots here " ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=spring+loaded+smd+sd+card&_sacat=0 "-----------------------------------------------------------------------------------------------------------Get the models for the casio here includes mirrored version and the backplate if you wish to try and make that work with the stock screws...." drive.google.com/file/d/18fsV9YxqEItBHfRqp81F7KnTbyHPyWPx/view?usp=sharing "-----------------------------------------------------------------------------------------------------------Work in progress model from mvmt watch band here " link will be updated soon!!! "-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=sy-f64-zZj4 "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Magic Bytes Simple Hexediting everythingdigital1 2022-08-02 | So magic bytes they are not to hard to understand but once you get it there are a load of use cases and capture the flags you can do just by modifyingthe file signature in a hex editor.Useful Pages"en.wikipedia.org/wiki/List_of_file_signatures""en.wikipedia.org/wiki/Magic_number_(programming)#In_files"-------------------------------------------------------------------------------------------------------------commands--sudo pacman -S hexedit "if on arch"sudo apt install hexedit "if your on debian kali etc'--how to edit a file--hexedit "filename/location"Last Video " youtube.com/watch?v=sy-f64-zZj4 "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Kwin Burn My Windows Arch Linux Window Effects everythingdigital1 2022-08-02 | So this is a cool window manager mod that allow a few new effects to be played when you close and open your windows. Just saw it made its way to kwin meaning it will work on arch now.-------------------------------------------------------------------------------------------------------------commands to install--git clone aur.archlinux.org/kwin-effects-burn-my-windows-git.git--now cd into it--makepkg -r -csudo pacman -U "tarfile"--Navigate to desktop effects in settings on arch----Apply the effect you want--Last Video " youtube.com/watch?v=WG6ir32vZqk "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Shock Potato DIY Party Game v1 everythingdigital1 2022-06-29 | Just a micro controller a mosfet and a high voltage module these often get labeled as "stun gun modules' but I assure you the voltages they claim are never correct but still be safe if you replicate this project. The parts I used are down below i'll consider uploading a 3d model if you guys want it but it is kinda useless unless you pick up the same metal containers at the dollar store. I used a 10k pull down resistor I had a 1k resistor as well but detached it and moved the connection I wanna use that one for a peizo buzzer and the 1k resistor was pointless to drive the gate of the mosfet the digispark pins don't output much....-----------------------------------------------------------------------------------------------------------Get the mosfet I used here " ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=irlz44n&_sacat=0&LH_TitleDesc=0&_odkw=digispark&_osacat=0 "-----------------------------------------------------------------------------------------------------------Get the high voltage module here " ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=higih+voltage+module&_sacat=0 "-----------------------------------------------------------------------------------------------------------Get the digispark I used here feel free to use any attiny or pico " ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=digispark&_sacat=0 "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
CM 123 AEP Mosfet Guide everythingdigital1 2022-05-08 | So to do all this is super simple just takes some time all your gonna need is the parts down below but feel free to try other parts connectors mosfets etc... Use what you think is the best just be sure to use right gauge of wire when needed. Also feel free to use a higher c-rated battery I used the lowest of the tenergy 7.4v lipo batterys available as long as they are the nano techs they should all fit I believe.. Some notes be sure to store your battery's at resting voltage I leave mine at 7.65 when im not gonna use it for awhile. last note during the b-roll I fired indoors at battery resting voltage so it wasn't fully charged but I can promise its as fast if not faster then before i'll chrono it sometime and post the numbers.-----------------------------------------------------------------------------------------------------------Get the charger I used here " amazon.com/Crazepony-Balance-Charger-Connector-Quadcopter/dp/B09NNLZBPD/ref=sr_1_5?keywords=lipo%2Busb%2Bcharger&qid=1649816489&sprefix=lipo%2Busb%2B%2Caps%2C166&sr=8-5&th=1 "-----------------------------------------------------------------------------------------------------------Get the battery I used here if not available order on ebay still cheaper then the nimh ones. " hobbyking.com/en_us/turnigy-nano-tech-300mah-2s-35-70c-lipo-pack.html "-----------------------------------------------------------------------------------------------------------Get the mosfet I used here JEFTRON MICRO MOSFET IIYou can use the pre-wired one or the unwired one which is what I used " jefftron.net/mosfet/micro-mosfet-ii "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Halo 2 Mcc Clipping Through Floors And Walls Easy everythingdigital1 2022-04-27 | This is way more simple and easier to get done then old bump skipping methods however I felt I needed to do a voice over for this since its kinda hard to explain just with title cards. Any way let me know what you guys find and how you use this glitch. Also sorry for not having more clips in the video I had many many more but after so many I felt like I got the point across... but yea this can get you to projection rooms out of the map alive and as well as trap ai in the ground which is something that might be interesting.Last Halo 2 Video " youtube.com/watch?v=0EzR6E8mKzQ "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
AEP Cm 123 Review Non-Mosfet Edition everythingdigital1 2022-04-13 | I got this aep for around 85$ which honestly isn't that bad but I had a good then bad experience with the nimh battery's they lasted all day but with-in half a week even following the math of charging for 3 hours has failed..so I suggest paying 5$ more or so for the pre-wired mosfet lipo ready variants since it may be chance whether your nimh battery or charger is good with the stock system. -----------------------------------------------------------------------------------------------------------Can't post links for the aep but later when we mod this to use lipo batterys using a mosfet i'll be sure to leave links in the description since the parts are rather hard to find at the moment and they are out of stock everywhere and I had to use knock off versions of parts...-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=FC-g9tKZrPc "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Wemos D1 Mini WiFi 12v Switch everythingdigital1 2022-03-16 | Ill be back with more videos soon sorry for the long delay... Any way this was gonna be apart of another project but I failed to get the parts. I still built what I could cause I thought it could help someone out. This is a very simple project that can be built for pretty cheap!!! Also I don't recommend the dc female jacks you need to twist them right as you insert or remove plugs or you risk unscrewing them also gluing the nuts in or melting them in the case is needed.Get the mosfets here " ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=irlz44n&_sacat=0&LH_TitleDesc=0&_odkw=wemos+d1+mini&_osacat=0 "-----------------------------------------------------------------------------------------------------------Get the wemos here " ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=wemos+d1+mini&_sacat=0 "-----------------------------------------------------------------------------------------------------------Get the models here " link will be up soon "-----------------------------------------------------------------------------------------------------------Get the code here " drive.google.com/file/d/1dpFKG5oAY25odgJzxrUifN7FcKkFkUpZ/view?usp=sharing "-----------------------------------------------------------------------------------------------------------Get the diagram here " drive.google.com/file/d/117oVt7MwSQe1nd7tOO3o3GFQi-YyI-2W/view?usp=sharing "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Winget WINDOWS PACKAGE MANAGER Guide everythingdigital1 2022-02-14 | Winget is super useful can be used to install all kinds of programs everything from discord to obs all in one go no hopping through hoops. It is also useful for uninstalling common bloatware on a new windows pc in one go. Today I cover how to search and install apps as well as update them and uninstall them. As always if you wish to just use the commands they are down below just copy paste into powershell.-----------------------------------------------------------------------------------------------------------COMMANDS USED IN VIDEOwinget install "program name no quotes"winget uninstall "program name no quotes"winget search "program name of what you want to find"winget listwinget upgrade "program name that you want to upgrade"-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=dWVpCrsALns "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Arch Linux Installing From The AUR Simple Guide everythingdigital1 2022-01-27 | So installing from the AUR it may seem daunting but it isn't that difficult this guide is assuming you are a beginner and have installed the required files following the arch Linux wiki about setting up the aur. Ill link the guide to that down below. Once you got the base devil installed feel free to follow the video with what ever pkg you wanna install. I'll also be covering something like this on windows but don't worry I can come back to this and go more in depth if any one wants more info or a video on yay or any other automatic AUR pkg managers.-----------------------------------------------------------------------------------------------------------Arch Wiki Page Covering Requirements To Use The AUR CHECK THIS OUT FIRST " wiki.archlinux.org/title/Arch_User_Repository "-----------------------------------------------------------------------------------------------------------AUR Search Programs " aur.archlinux.org/packages "-----------------------------------------------------------------------------------------------------------Last Arch Video " youtube.com/watch?v=DA2s5CRJq8g "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Softmodding A Ps1 With A Ps2 TonyHax everythingdigital1 2022-01-01 | So TonyHax as implied by the name is a hack first found via the game tony hawk , but has since been applied to many games and can be set up a few different ways. For this tutorial we are using the game exploit method and a ps2 to edit our ps1 memory card saves. If you have other means of adding these files to the memory card you can go about this the same way just without a ps2.-----------------------------------------------------------------------------------------------------------TonyHax Download Link " github.com/socram8888/tonyhax/releases "TonyHax Official Page And Tutorial " https://orca.pet/tonyhax/ "TonyHax Back Up Link " "-----------------------------------------------------------------------------------------------------------Last Console Video " youtube.com/watch?v=ThIvB1trP0U "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Oculus Quest 2 Making A Basic Home Environment everythingdigital1 2021-12-13 | This is just basic tutorial covering key-framing , meshes , and the do's and do not's when making a quest home world. I also talk about materials and textures but I cut the texture segment since I goofed it up i'll do it more in part 2. The home I show at the end is only a sparse map hints why the detail was low and why photogrammetry works good for a quest home. As always down below are the links you need to get started and the files you need to download.-----------------------------------------------------------------------------------------------------------Things are always subject to change so be sure to visit the discords that hold the start up files and stay up too date." discord.com/channels/667571798031859713/667763372946751519 "-----------------------------------------------------------------------------------------------------------Get blender here " blender.org "-----------------------------------------------------------------------------------------------------------Get the blender start up file here " discord.com/channels/667571798031859713/667763372946751519 "If Needed I Can Self Host Any Files IF NEEDED!!!-----------------------------------------------------------------------------------------------------------Get the home converter here " github.com/VinceCrusty/Quest-Homes-Environment-Converter/releases/tag/v1.9.7 "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Halo 2 Glitches Non Textured Walls And Phantom Glitch everythingdigital1 2021-12-09 | I forgot a clip for the crashed phantom... I will have to re-record it for another video but still wanted to get this up. These 2 things are pretty un-common and the phantom flying in from down up I thought was odd since on original it is only displaced but still fly's in from the right also it works better on two player... It also takes you to a great spot for a dead alive launch perhaps. :D I am aware large moving objects do effect other places in the game but never expected to see it effect the phantom so drastically.. Anyway more videos on the way soon for 3d modeling and hopefully Linux stuff sorry for the long delay from making videos.Last Halo 2 Video " youtube.com/watch?v=nTYKuK5xmzc "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Nickle Metal Hydride AA Solar Charger DIY everythingdigital1 2021-11-21 | So to make things short 2 diodes low voltage drop out kind are needed and resisters are optional from my experience. I used zener diodes its all I had at the time. Any way the diagram I used is linked down below and the 3d print files i'll upload sometime soon. I hope this video helps someone out and sorry for lack of soldering in video next time I will. This project is simple so didn't think it is needed for this video.-----------------------------------------------------------------------------------------------------------Parts Needed2X AA Battery Holder " ebay.com/itm/234270795757 "Rectifier Diode " ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=rectifier+diode&_sacat=0&LH_TitleDesc=0&_odkw=diode+l&_osacat=0 "Zener Diode I Used In Video I Believe... " ebay.com/itm/161175215509?hash=item2586ca9d95:g:GVQAAOSw7I5Tuzh4 "-----------------------------------------------------------------------------------------------------------Diagram I Used " instructables.com/A-Simple-Solar-Charger-for-NickelMetal-Hydride-and "-----------------------------------------------------------------------------------------------------------3D Printable PartsLink Will Be Up Soon!-----------------------------------------------------------------------------------------------------------Last Project Video " youtube.com/watch?v=6Nd-OexKLRg "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Franklins Bell Test 1 3d Printed Preview everythingdigital1 2021-11-09 | Will be setting this to private when the real video is done but just thought i'd show off what I got right now in terms of this project. If I had to guess the one sheet is around 2,000 volts using the high voltage stun gun I made before to charge it for about 4 seconds. The capacitor would get stronger if rolled up but right now I don't got proper materials to make the capacitor out of so it would short if rolled up. I'll probably get stuff to make more and smaller ones then dip them in mineral oil or wax so the charge stays in the capacitors longer i'm kinda interest in seeing how long I can get something like this too run. I'll also be making it look nicer when I got the time.But for now while this clip is up hope you enjoy.
Halo 2 Glitches Becoming The Spectator Cam everythingdigital1 2021-11-04 | Well it's more like a spectator cam but this can be done on a few levels most of which I show in the video there may be a few other maps this can happen on. Also another thing I forgot to mention it in the video some gondolas and elevators need the death cam on or around them too move but the actual death cam won't move so keep that in mind the spectator cam is technically a biped now since we merged with it. Also sorry for the typos in video...------------------------------------------------------------------------------------------------------------Quick Glitch How To-Find a place to pinch then kill player 2 now swing till the next load zone and delay the spawn make sure to jump into the loadzone. If you want to make it easier block the default spot pinch then you can just walk to a load zone even if it is far away with little effort just be sure to jump and keep swinging through it when you do get to the loadzone.-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=znb2IuIciLs "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Budget Hdmi Capture Card everythingdigital1 2021-10-24 | This capture card I primarily got due to the fact it had loop back. Essentially a pass through mode. Not to say you couldn't game from the capture software or without a external display you can configure it too do so and the latency isn't that bad but still I want near perfect zero latency while I play and the loop back accomplishes this. I did most tests using cpu encoding your mileage will vary with cpu encoding but if you got a gpu hardware encoding is great for recording.-----------------------------------------------------------------------------------------------------------Hdmi Capture Ebay " ebay.com/sch/i.html?_from=R40&_nkw=60fps+1080p+HDMI+Video+Digtal+Capture+Card+Recorder+for+Streaming+Meeting+Game&_sacat=0&_sop=15 "-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=znb2IuIciLs "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Halo 2 Dead Alive On Legendary? And Pinched Spawns everythingdigital1 2021-10-12 | This is kinda experimental I don't know it's use cases I just knows it is a one of a kind trick on legendary that hasn't been pulled off before from my knowledge. Also I know people get questions about pinching the default spots on legendary and well it end's up counting as a death sadly but there is a brief moment where you can kill the default spot player from impact at another load zone. Another thing to note some levels and load zones if you pinch in them long enough will tp you back to the original spawn point.-----------------------------------------------------------------------------------------------------------I plan to do more videos soon on halo and other stuff. I got some capture cards I wanna review and a diy aa rechargeable battery charger I made from old broken solar lamps that I put together just got to run some tests and make it look pretty yet but more content soon. :D-----------------------------------------------------------------------------------------------------------Last Halo 2 Video " youtube.com/watch?v=Ys8v7USJ83Q "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Halo 2 Mcc Graphical Glitches And Decal Glitches Some Bonus Glitches Mixed In... everythingdigital1 2021-10-04 | Warning some flashing happens if your prone to seizures feel free to skip if it gets too intense....-----------------------------------------------------------------------------------------------------------So Halo 2 on mcc is interesting if you restart too much you can load debug text and crash the whole map bsp by corrupting the next sections of the map. But if you play your cards right wait till your shields only start getting effected you can get wild cutseen corruptions. Also the texture decal swapping glitch works on vista as well but might work on the original I haven't tried it yet.... And the Halo Ce glitch should also apply to the original pc version not too sure about the original Xbox version.-----------------------------------------------------------------------------------------------------------This series is to document mcc and original halo 2 glitches as well as to potentially discover new ones with your help.-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=biBySMMxjfc "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Halo 2 Sentinel AUP And Dead Alive Possibly 2 Preloaded Characters On Quarantine Zone At Once!!! everythingdigital1 2021-09-20 | Forgive the lack of a clip I'll need to redo it and post it separately but both characters load in a pre-loaded state you can see the glow of 2 plasma rifles till you swing then they swap around. I am tempted to lure a flood back or piss the teammates off to see if they can push both pre-loaded characters down at once. Any way some AUP tips make sure you don't pick up a grenade by mistake this includes the player you kill or it won't work it can happen quick so pay attention besides that have fun the AUP works till the gondola cut-seen I am working on how to get it to explore the gondola.-----------------------------------------------------------------------------------------------------------Previous Video " youtube.com/watch?v=J4l7kBMzfzg "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
PS/2 IDE To Sd Cards IBM 433DX Restored everythingdigital1 2021-09-16 | I got this machine and 2 other IBM pc's not too long ago and so far out of the 3 I got 2 of them up and running and internally they both look brand new it's pretty impressive. Just makes me wonder why the one machine was never set up and formatted and the other 2 had the ram and hard drives pulled. The last machine how ever has no clock battery and takes a more harder to find and expensive hard drive and needs ram it did also have re-work done so it may be a harder machine to get running so it may be a bit before I can cover it in a video.-----------------------------------------------------------------------------------------------------------Any way adapter I used in video is down bellow also I used a 4gb sd card with about 512mb partition if I remember correctly set up in fat 16 format.-----------------------------------------------------------------------------------------------------------Get the IDE TO Sd Card Adapter here " ebay.com/itm/274774084221?_trkparms=amclksrc%3DITM%26aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D592813c4f7d047ce88f1a0468cbb3ffa%26pid%3D100675%26rk%3D3%26rkt%3D15%26sd%3D371826850938%26itm%3D274774084221%26pmt%3D0%26noa%3D1%26pg%3D2380057%26brand%3DUnbranded&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3Acaddf8b7-168c-11ec-8dc8-0eb1eada0404%7Cparentrq%3Aec3434ea17b0a0f2cc915ec8fffe6310%7Ciid%3A1 "-----------------------------------------------------------------------------------------------------------Get the isa bracket here 3d print file all credit goes to original creator but I may end up making my own bracket some time soon...." thingiverse.com/thing:3543297 "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Halo 2 Glitch Montage Title Error Aups Scarab Guns ETC.... everythingdigital1 2021-09-11 | Today we explore some halo 2 cutseens and the breaks that can happen by aup glitching or overloading them. We also break some title cards on some levels and get the second scarab gun. Also one glitch happened naturally I had skulls on but a random texture phased in on cairo station a giant X. Any ideas.... And if you wanna crash a few cutseens a lot of the time enemy react sounds are cut from the ai so getting a enemie or aup glitching as one and getting it into the cutseen can cause random screams from keys too cortana freezing up and crashing the level. In some cases level cutseens don't crash just end.-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=VW9jBmraus4 "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Halo 2 Odd Cutseen Sound And Some Cool Rare Glitches everythingdigital1 2021-09-04 | So this video shows some cool area's a possible AUP glitch method and what I think was the strangest sound I ever heard although I figured it out if you wanna see what it is in another clip....-----------------------------------------------------------------------------------------------------------I finally answered the question the sound came from the following cutseens Miranda keys in this clip the sound is different but on a replay with same set-up she screamed two times clearly it was keys although can't quite say what the sound was and screen shaking during this clip... Also she talks again once you exit the hanger on Mcc this results in game skipping to next level before cutseen finishes my guess is she has a enemy react sound but as level unloads for next cutseen she loses the sound effect which results in a skip.-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=sD9Yovgll5U "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Linux My Daily Driver KDE Plasma everythingdigital1 2021-09-03 | Configured this from terminal too completion I really like it so far and been customizing this distro too the point it been my main OS and has features that just work better then my main windows OS. Just for kicks i'll be editing the next few videos with kdenlive and doing the normal stuff I do on windows on this just to get out of my comfort zone to make more videos. I do use wine and have Black Arch installed which has Kali Linux package's but for Arch Linux if any one want's videos covering that stuff...-----------------------------------------------------------------------------------------------------------Arch Linux Download " archlinux.org/download "-----------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=CfZCv8_3BII "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Sentinel AUP & Inside Cut-seen Room Halo 2 everythingdigital1 2021-08-24 | Some context I was just goofing around and saw these are old clips on my Xbox and I thought this AUP was interesting I broke a rule when it came to doing a AUP glitch so i'm surprised this worked??? Normally you would rag doll I killed the second player 2 times but in the end after the pinch I did it 3 times which should cause dead or alive to occur but on this map it doesn't under certain conditions I think it has to do with the vehicle and door triggering... Any ideas on why this seems to happen I never seen any AUP sentinel glitches on this map online so I assume i'm first to document it.Also sometimes on this map you can get stuck floating in the air doing the same thing as the arbitor as if your standing on a box you can walk off.I also think this variant of glitch might work on another map.-----------------------------------------------------------------------------------------------------------Sorry for the random not so together video i'll be back soon with either better halo content or some videos on kde plasma Arch Linux type stuff. I am also repairing the other 2 IBM machines so hope you are ready to see that.Last Halo 2 Video " youtube.com/watch?v=uNae2N1yqsg "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
IBM Making A Reference Diskette On Windows 10 IBM Model 56 Type 8556 everythingdigital1 2021-08-15 | To tell you the truth this was much easier then I anticipated... But hopefully this guide helps someone out since I know there isn't a lot of tutorials covering how to do this on newer hardware. Also there will be a part two once I recover and find my old ps/2 keyboard or when I buy a new one.-----------------------------------------------------------------------------------------------------------Get the Reference Disk Images here " ardent-tool.com/disks/disks.html "-----------------------------------------------------------------------------------------------------------Get the WinImage Program here " http://www.winimage.com/download.htm "-----------------------------------------------------------------------------------------------------------Get the Floppy Disk Reader Writer here " link will be updated soon "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Halo 2 Glitches Easter Eggs And Hidden Rooms. everythingdigital1 2021-08-04 | Just a few clips from Halo 2 I had on my pc. Mostly me just messing with player merging and dead alive glitches and aup glitches. If you all want a tutorial for player merging let me know it's not to difficult and I feel like I can make it maybe more understandable then other videos on here. Also I am aware the iohboy Easter egg can be found easier then what I did I wanted to recreate a clip I saw and find the Easter egg by glitching so fast out of map that the lost camera auto homed to the Easter egg on it's own.Last Video " youtube.com/watch?v=dMbgfP6JTXA&pp=sAQA "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
Simple 555 Timer Touch Switch For My Solar Set Up everythingdigital1 2021-07-20 | I needed a switch so I made one well make that 2. I always prototype then I do a finished build the first circuit was busy and over engineered so I slim lined it did some small tweaks to the case since the first case wasn't too bad and I added actual dc ports. Some dc ports may be better then others these ones are a tight fit for the male connectors I have... Any way diagrams and models down below as well as the parts needed.-----------------------------------------------------------------------------------------------------------Part Links555 timer " ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=555+timer&_sacat=0 "dc jack " ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313&_nkw=DC+Power+Supply+Jack+Socket+Female+Panel+Mount+Connector+5.5+x+2.1mm+H4Mdn&_sacat=0 "Resistors " ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1311&_nkw=resistor+kit&_sacat=0&LH_TitleDesc=0&_odkw=DC+Power+Supply+Jack+Socket+Female+Panel+Mount+Connector+5.5+x+2.1mm+H4Mdn&_osacat=0 "Power Mosfet " ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=IRLZ44N+IRLZ44&_sacat=0 "Perf Board " ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313&_nkw=5cm+x+7cm+%282x3in%29+PCB+Prototyping+Perf+Boards&_sacat=0 "-----------------------------------------------------------------------------------------------------------3D Printable Files-Links will be updated and up soon!!!------------------------------------------------------------------------------------------------------------Diagrams-Links will be updated and up soon!!!------------------------------------------------------------------------------------------------------------Last Video " youtube.com/watch?v=PxY24ef8o-Y "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
2m 8 seconds on Halo 2 Uprising MCC with bonus clips at end... everythingdigital1 2021-07-14 | Not my best speed run on the level uprising in halo 2 but for not trying and using a sub par controller thought it was pretty worth while showing the clip. Also at the end are some glitches crashes goofs from other moment's I just wanted to get off my pc. I'll eventually post some more glitches and things to the channel..... I actually have some cool clips of things I don't think ever happened before to some extent..---------------------------------------------------------------------------------------------------------------------------I will also be back with more videos soon I finished my touch sensor project unfortunately the video got messed up so it's mostly gonna be explaining the circuit and how I made the case but I still hope it helps someone out even with the lack of a soldering perspective.
Local Host A Website To The Tor Network On Linux everythingdigital1 2021-07-06 | Sorry for the delay in videos I did rush this one to get it up but if you ever wondered how to set up a basic site on the tor network this video should help you out. If you need any thing downloaded on your Linux distro the commands to install tor and python 3 are down below. Also I use 3 terminals in the video but you can do everything in just 1 or 2 terminals if you use the screen command and a simple bash scripts I didn't cover it in the video. But perhaps in future video we can cover automating the process and having the site host it's self at certain times of the day.-----------------------------------------------------------------------------------------------------------Commands To Install Required Programs If You Don't Have Them Already!!!sudo apt-get install python3sudo apt-get install tor-----------------------------------------------------------------------------------------------------------Previous Linux video here " youtube.com/watch?v=6R2DhruMt9g "-----------------------------------------------------------------------------------------------------------Please Visit: " http://everythingdigital1.com "
