Making BB-8 (v2) - Improving the Head - Part 7 RimstarOrg 2017-09-14 | In part 7 of how to make a BB-8 I work on the head being heavier than I'd like, so much that it affects performance. I change the way the head support structure attaches so that I can lighten it, and then I hack away at it to make it lighter. I swap the 2000mAh battery for a lighter 150mAh one. And I replace the deodorant ball casters with much better, but still fairly lightweight, Pololu casters.This video was made possible in part by these Patreon supporters:Jonathan RiekePrintable ScienceSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgThe Pololu casters used are these ones:pololu.com/product/2691See also:Making BB-8 (v2) - Adding HC-05 Bluetooth RC - Part 6youtube.com/watch?v=5EuI9lBtC3I&list=PLFsZmHTZL-zmztc_P7h2tqLxKJHu0vH1eBall Bearing Motor - How to Make/How it Worksyoutube.com/watch?v=DjKhggNJGls&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgSound effects: http://www.freesound.org licensed under the Creative Commons 0 License.
Izzys Two-Eyed Robot Object Recognition and Fixation RimstarOrg 2022-11-26 | Izzy not only has two eyes like a human but does object recognition with both eyes, picks an object and fixates on it, following it around the room. It uses the Yolo 3 neural network running on the darknet neural network engine. The brains are an NVIDIA Jetson TX1 with an arduino mega 2560 for motor control and two YoLuke webcams for the cameras. This video details how it's all done.Subscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:Making Servo Robot Eyes for YoLuke Webcam - Izzyyoutu.be/DY4as7Lc9KYRaspberry Pi to Arduino Serial USB Communication youtu.be/xc9rUI0F6IwConvert ATX Computer Power Supply for USByoutube.com/watch?v=RY65YVS4buQ&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVurimstar.org
Preview - Izzys Two-Eyed Robot Object Recognition RimstarOrg 2022-10-02 | Izzy not only has two eyes like a human but does object recognition with both eyes, picks an object and fixates on it, following it around the room. This is a preview of the more upcoming more detailed video about how it works.Subscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgIf you want 3D print these eyes then you can. They're available on Thingiverse here:thingiverse.com/thing:4128076See also:Making Servo Robot Eyes for YoLuke Webcam - Izzyyoutu.be/DY4as7Lc9KYRaspberry Pi to Arduino Serial USB Communication youtu.be/xc9rUI0F6IwConvert ATX Computer Power Supply for USByoutube.com/watch?v=RY65YVS4buQ&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuHere's where I bought my YoLuke Webcam from:amazon.ca/dp/B016MPIFWQ/ref=pe_3034960_236394800_TE_dp_1rimstar.org
How to Desolder with a Desoldering Pump/Solder Sucker RimstarOrg 2021-10-10 | How to desolder/remove solder using a desoldering pump or solder sucker. Not only shows how to desolder but also how it work and what's inside a desoldering pump. I do it mostly for salvaging electronic parts for circuit bords but it's also useful when fixing errors when soldering.Subscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:Make Crystal Earphone/Earpiece for Crystal Radio - Homemadeyoutube.com/watch?v=OVapqz4yBCY&list=PLFsZmHTZL-zlSltC6ELZW9PK4ks7wgPRzHow to Remove Chuck for Drill Motoryoutube.com/watch?v=Lz-HfDWjmRQ&list=PLFsZmHTZL-zm8-_Mu6xMMoYncvotNs5ss&t=1sHow to Make a TEA Laser - Homemade/DIY Laseryoutube.com/watch?v=v9sKqGC3t-0&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hrimstar.org
Raspberry Pi to Arduino Serial USB Communication RimstarOrg 2021-02-17 | Here's how to communicate between a Raspberry Pi and an Arduino using serial USB communication.Subscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgLink to hackaday.io project:hackaday.io/project/171456-diy-hobby-servos-quadruped-robotLink to the source code shown in this video:rimstar.org/science_electronics_projects/raspberry_pi_to_arduino_serial_usb_communication.htmSee also:Making Servo Robot Eyes for YoLuke Webcam - Izzyyoutube.com/watch?v=DY4as7Lc9KY&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuMaking BB-8 Droid (v2) - Part 1youtube.com/watch?v=BCXH4AN2aog&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuMake USB Power Cableyoutube.com/watch?v=5lnIviZ9Aqs&list=PLFsZmHTZL-znMsTduihhoYU21XL-d3p3Krimstar.org
Making Servo Robot Eyes for YoLuke Webcams - Izzy RimstarOrg 2020-01-19 | How to make a pair of servo motor controlled robot eyes for YoLuke webcams, resulting in a robot that sees! These are for my robot, Izzy.Subscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgIf you want 3D print these eyes then you can. They're available on Thingiverse here:thingiverse.com/thing:4128076See also:Convert ATX Computer Power Supply for USByoutube.com/watch?v=RY65YVS4buQ&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuMaking a Servo Controlled Eyeball for Pi Camera 2youtube.com/watch?v=K9PUCmdXlQc&t=0s&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuHere's where I bought my YoLuke Webcam from:amazon.ca/dp/B016MPIFWQ/ref=pe_3034960_236394800_TE_dp_1Follow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorgrimstar.org
Convert ATX Computer Power Supply for USB RimstarOrg 2018-09-28 | Here's how to convert a power supply from a computer to one you can use yourself, including with USB ports. These power supplies are called ATX power supplies because they follow the ATX standard.This video was made possible in part by these Patreon supporters:Mark PeltierPiotr Bomba youtube.com/user/przysuchainfoDimitrij Greco youtube.com/user/Taran72YojimboPrintable ScienceRobert BüchelSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:Making a Servo Controlled Eyeball for Pi Camera 2youtube.com/watch?v=K9PUCmdXlQc&t=0s&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuMake USB Power Cableyoutube.com/watch?v=5lnIviZ9Aqs&list=PLFsZmHTZL-znMsTduihhoYU21XL-d3p3KServo Motor With Raspberry Pi and Maestro boardyoutube.com/watch?v=mX6P9CwSm7I&list=PLFsZmHTZL-znMsTduihhoYU21XL-d3p3KFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorgrimstar.org
How to Make a Zoetrope RimstarOrg 2018-09-01 | Here's how to make a zoetrope, a simple to make, fun animation demonstration.The link to the webpage where you can download the zoetrope-horse.pdf, zoetrope-blank.pdf and zoetrope-disk.pdf is:rimstar.org/science_electronics_projects/how-to-make-a-zoetrope.htmThe online store where you can buy the animations, guide and which also includes the other zoetrope files is here:etsy.com/ca/listing/640725743/zoetrope-with-animations-and-guide
Making a Servo Controlled Eyeball for Pi Camera 2 RimstarOrg 2018-07-26 | Here's how I designed and made a servo controlled eyeball for a Pi Camera 2. I use a Raspberry Pi and a Pololu Micro Maestro motor controller to control it. This is for playing around with neural networks and robotics.This video was made possible in part by these Patreon supporters:Mark PeltierPiotr Bomba youtube.com/user/przysuchainfoDimitrij Greco youtube.com/user/Taran72YojimboPrintable ScienceRobert BüchelSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgThe source code for controlling the Maestro board and servos is at:rimstar.org/science_electronics_projects/servo_motor_with_raspberry_pi_and_pololu_maestro.htmThe STL, OBJ, and Blender files are all available here:thingiverse.com/thing:3023833Please share in the comments if you do anything with this.Further information about the code for emulating the human retina is not available yet.See also:Servo Motor With Raspberry Pi and Maestro boardyoutube.com/watch?v=mX6P9CwSm7I&list=PLFsZmHTZL-znMsTduihhoYU21XL-d3p3KMy CR-10 3D Printer - Ceality 3D Printeryoutube.com/watch?v=Mvt6udp5q8s&list=PLFsZmHTZL-zm8-_Mu6xMMoYncvotNs5ssFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorgrimstar.org
How to Make Hydrogen Generator Electrolyzer for Balloon RimstarOrg 2018-06-29 | How to make a Hydrogen generator electrolyzer for a balloon, including what is an electrolyzer and how an electrolyzer works. Note, using stacked plates as I did makes only a minimal contribution so you may as well go with one plate for each side. More on that analysis is on my webpage here:rimstar.org/science_electronics_projects/hydrogen-generator-electrolyzer-for-balloon-stacked-plates.htmThis video was made possible in part by these Patreon supporters:Mark PeltierPiotr Bomba youtube.com/user/przysuchainfoDimitrij Greco youtube.com/user/Taran72YojimboPrintable ScienceRobert BüchelSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:How Powering with Atmospheric Electricity Worksyoutube.com/watch?v=2rVdEhyMR6A&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hHow to Make Tesla Coil - Small Spark Gap Tesla Coilyoutube.com/watch?v=0SaEPW_iMF8&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorgrimstar.org
How to Make Pinhole Camera with Poster Board RimstarOrg 2018-05-31 | Here's a cheap and easy way to make a pinhole camera using a single sheet of poster board. This is great for if you need to make a few or lots of them cheaply, great for a kids activity.This video was made possible in part by these Patreon supporters:Mark PeltierPiotr Bomba youtube.com/user/przysuchainfoDimitrij Greco youtube.com/user/Taran72Jonathan RiekePrintable ScienceRobert BüchelSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgTo purchase the pinhole camera poster board template, go to:etsy.com/ca/listing/604178528See also:Pyramid Hologram - How to Make/How it Works with Princess Leia Hologramyoutube.com/watch?v=UFhhIOaGW7U&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hPinhole Camera - How to Make (using a shoebox this time!)youtube.com/watch?v=0Bx8P4EvYLA&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorgrimstar.orgA Darker Heart - music by audionautix.com
How to Make a Coil Gun using a Fly Swatter RimstarOrg 2018-04-17 | Here's how to make a coil gun, in this case using an electric fly swatter/bug zapper for the power supply.This video was made possible in part by these Patreon supporters:Mark PeltierPiotr Bomba youtube.com/user/przysuchainfoDimitrij Greco youtube.com/user/Taran72Jonathan RiekePrintable ScienceRobert BüchelFor this coil gun's schematic and other updates, go to:rimstar.org/science_electronics_projects/how-to-make-coil-gun-diy-w-fly-swatter.htmSee also:Electric Fly Swatter/Zapper Racket High Voltage Power Supplyyoutube.com/watch?v=niRCKUliQWs&list=PL36D7ABECE2AC9666How to Make CFL Powered by Electric Fly Swatter/Racket Zapperyoutube.com/watch?v=ONAVPnp9WcQ&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorgrimstar.org
3D Printed Helping Hands Magnetic Holder RimstarOrg 2018-03-31 | This is a 3D printed helping hands magnetic holder I designed for attaching to a vice for holding things while working on them (e.g. soldering wires to something).This video was made possible in part by these Patreon supporters:Mark PeltierPiotr Bomba youtube.com/user/przysuchainfoDimitrij Greco youtube.com/user/Taran72Jonathan RiekePrintable ScienceRobert BüchelSupport RimstarOrg on Patreon patreon.com/user?u=680159 or make a one-time donation at rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgIf you're buying a CR-10 then consider using one of the links below. One is for a US plug and the other is for an EU plug. It'll cost you nothing extra and you'll be helping support RimstarOrg, this YouTube channel.Creality3D CR - 10 3D Printer - US PLUG BLUEgearbest.com/3d-printers-3d-printer-kits/pp_627175.html?lkid=12824406Creality3D CR - 10 3D Desktop DIY Printer - EU PLUG COFFEE AND BLACKgearbest.com/3d-printers-3d-printer-kits/pp_441282.html?lkid=12824413Files for making this 3D printed magnetic helping hands holder:Magnetic holder with ball:thingiverse.com/thing:2770722 stevendpe, alexrich82:thingiverse.com/thing:824711giufini:thingiverse.com/thing:801279Magnets:ebay.com/itm/173018345313The webpage about this magnetic holder is here:rimstar.org/science_electronics_projects/3d-printed-helping-hands-magnetic-holder.htmSee also:3D Printing a Bicycle Chain Sprocketyoutube.com/watch?v=V4ohWg4GfYc&list=PLFsZmHTZL-zm8-_Mu6xMMoYncvotNs5ssMy CR-10 3D Printer - Ceality 3D Printeryoutube.com/watch?v=Mvt6udp5q8s&list=PLFsZmHTZL-zm8-_Mu6xMMoYncvotNs5ssFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorgrimstar.org
How a Wimshurst Machine Works RimstarOrg 2018-02-28 | How a Wimshurst machine works, a complete explanation of how this very popular electrostatic generator works. Includes electrostatic, inductive charging, the neutralizer bars, collectors, Leyden jars and the spark gap.This video was made possible in part by these Patreon supporters:Dimitrij Greco youtube.com/user/Taran72Jonathan RiekePrintable ScienceRobert BüchelSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgHere are the videos that use Wimshurst machines:How to Make Corona Motor (v2) aka Electrostatic Motor/Atmospheric Motoryoutube.com/watch?v=9uEjXsX1F14&list=PL36D7ABECE2AC9666Franklin's Bells - How to Make and Demonstrationsyoutube.com/watch?v=cjlMrSlIIIQ&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hHand-Cranked Laser - TEA Laser Powered by Wimshurst Machineyoutube.com/watch?v=9huUsYDJZrM&list=PLFsZmHTZL-zmVo7Csiex_9co1uzWg9LTIBall Cyclotron/Electrostatic Accelerator How it Works/Makingyoutube.com/watch?v=3t7npMCxiVoSmoke Precipitator - Measuring Voltage & Demosyoutube.com/watch?v=ARSQWTzWago&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hHandheld Wimshurst Machineyoutube.com/watch?v=ORGXnIB3gyMWimshurst Machine on Sparking Bikeyoutube.com/watch?v=dQYCHMPH2uE&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuSee also:How a Crystal Radio Workshttp://www.youtube.com/watch?v=0-PParSmwtE&list=PLFsZmHTZL-zlSltC6ELZW9PK4ks7wgPRzWimshurst machine - How to make using CDsyoutube.com/watch?v=puC6-UaT9Fk&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVu3D modeling and animation done using Blender 2.71.Follow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorgrimstar.org
My CR-10 3D Printer - Creality 3D Printer RimstarOrg 2018-01-31 | Here's a detailed look at my Creality CR-10 3D printer that I use for making thing's, including how it works, how to set up a print, and some of the things I've printed.The Tiny Machines 3D's video for assembling it is at:youtube.com/watch?v=Cdkb_ILCptwThe Filament Guide and Wire Clip is at:thingiverse.com/thing:2186253This video was made possible in part by these Patreon supporters:Jonathan RiekePrintable ScienceRobert BüchelSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgIf you're buying a CR-10 then consider using one of the links below. One is for a US plug and the other is for an EU plug. It'll cost you nothing extra and you'll be helping support RimstarOrg, this YouTube channel.Creality3D CR - 10 3D Printer - US PLUG BLUEgearbest.com/3d-printers-3d-printer-kits/pp_627175.html?lkid=12824406Creality3D CR - 10 3D Desktop DIY Printer - EU PLUG COFFEE AND BLACKgearbest.com/3d-printers-3d-printer-kits/pp_441282.html?lkid=12824413See also:3D Printing a Bicycle Chain Sprocketyoutube.com/watch?v=V4ohWg4GfYc&list=PLFsZmHTZL-zm8-_Mu6xMMoYncvotNs5ssMaking BB-8 (v2) - Painting/Details/LEDs - Part 5youtube.com/watch?v=PxG8bDkTSUI&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuThe CR-10 webpage on rimstar.org:rimstar.org/science_electronics_projects/cr-10-3d-printer-creality.htmFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorgrimstar.orgThe Anet A8 modifications shown at 0:35 are used under Fair Use from:Anet A8 3D printer upgrades part 1youtube.com/watch?v=5MAc2GZp70M
Servo Motor With Raspberry Pi and Maestro board RimstarOrg 2017-12-22 | How to use the Pololu Maestro servo controller board with the Raspberry Pi 3 to control servo motors. The Maestro is the Micro Maestro 6-Channel USB Servo Controller board. A python module for controlling the board is also available.This video was made possible in part by these Patreon supporters:Jonathan RiekePrintable ScienceRobert BüchelSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgHere's the webpage with the Maestro python source code and more details, including a lot about power issues:rimstar.org/science_electronics_projects/servo_motor_with_raspberry_pi_and_pololu_maestro.htmSee also:Make USB Power Cableyoutube.com/watch?v=5lnIviZ9Aqs&list=PLFsZmHTZL-znMsTduihhoYU21XL-d3p3KPin Headers - soldering, cutting, male, female, etc.youtube.com/watch?v=qz9Ryos1_GY&list=PLFsZmHTZL-znMsTduihhoYU21XL-d3p3KFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.org
Make USB Power Cable RimstarOrg 2017-11-20 | How to make a USB power cable, useful for DIY electronics projects where you're powering something from a phone battery bank (e.g. robotics).This video was made possible in part by these Patreon supporters:Jonathan RiekePrintable ScienceRobert BüchelSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:Pin Headers - soldering, cutting, male, female, etc.youtube.com/watch?v=qz9Ryos1_GY&list=PLFsZmHTZL-znMsTduihhoYU21XL-d3p3KHow to Read a Schematicyoutube.com/watch?v=_HZ-EQ8Hc8E&list=PLFsZmHTZL-znMsTduihhoYU21XL-d3p3KFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.org
Pin Headers - soldering, cutting, male, female, etc. RimstarOrg 2017-10-24 | Working with pin headers: how to solder headers, cutting headers, breakaway headers, both male and female headers are covered.This video was made possible in part by these Patreon supporters:Jonathan RiekePrintable ScienceSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgWebpage about pin headers:http://rimstar.org/science_electronics_projects/pin_headers_soldering_cutting_male_female.htmSee also:Making BB-8 (v2) - Adding HC-05 Bluetooth RC - Part 6youtube.com/watch?v=GGy-W-iSv4I&list=PLFsZmHTZL-zmztc_P7h2tqLxKJHu0vH1eFun with Arduino that Talks with Speech Synthesizeryoutube.com/watch?v=RFCJdBVkpE8&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.org
What is Electricity: AC v DC, Electrostatic, Lightning, Arcs, Sparks RimstarOrg 2017-08-28 | What is electricity? How does electricity work? There are many forms of electricity:AC, DC, electrostatic, sparks, arcs, gas discharge and corona discharge, but all are variations of the same principle. This video goes through them all.This is an improved version of the previous video. The battery chemistry example was improved, the generator and solar power explanations were added, and some minor tweaks were done. Thanks for the feedback in the comments to the previous version!This video was made possible in part by these Patreon supporters:Jonathan RiekePrintable ScienceSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:How Fast is an Electron and Electricityyoutube.com/watch?v=jbi7gJTPSXkHow to Make High Voltage Capacitors - Homemade/DIY Capacitorsyoutube.com/watch?v=MPD7skZ8OSoWhat is Ground? Earth Ground/Earthingyoutu.be/zLW_7TPf310How to add Ion Propulsion to Star Wars TIE Fighter Modelyoutube.com/watch?v=oD_8_NZJF48How a Van de Graaff Generator Worksyoutube.com/watch?v=EsZQS2GOMQETriboelectric effect/series or triboelectricityyoutube.com/watch?v=ey88EdZo9hUThe Cube - How to Make High Voltage Power Supply w Flyback/Builtin Diodesyoutube.com/watch?v=-KFhBVfpfDwFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgThanks to Ottawa Solar Power (http://ottawasolarpower.com) for the images of solar panels and the off-grid solar system with batteries.
Potato chip circuit/macrochip with 555 timer circuit RimstarOrg 2017-07-20 | A fun circuit on a potato chip, sort of a DIY microchip or macrochip, using a 555 timer circuit.This video was made possible in part by these Patreon supporters:Jonathan RiekePrintable ScienceSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgThe webpage about this same potato chip macrochip, along with the circuit diagram:http://rimstar.org/science_electronics_projects/potato_chip_macrochip_w_555_timer_circuit.htmSee also:555 Timer Chip Music Player for Maker Faireyoutube.com/watch?v=WM1bZgBqDl4&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuHow to Make a Laser Communicator (to Solar Cell)youtube.com/watch?v=yZ7PrWUVWP8&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hMake Crystal Earphone/Earpiece for Crystal Radio - Homemadeyoutube.com/watch?v=OVapqz4yBCY&list=PLFsZmHTZL-zlSltC6ELZW9PK4ks7wgPRzFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgA Darker Heart - music by audionautix.com
Making BB-8 (v2) - Adding HC-05 Bluetooth RC - Part 6 RimstarOrg 2017-05-31 | Here's how I add an HC-05 Bluetooth board for talking to the Arduino in my BB-8 (v2), and how to use MIT's App Inventor to create a remote control Android app for the phone to control the BB-8 droid. This is Part 6 of the series on how to make a BB-8 droid.This video was made possible in part by these Patreon supporters:Jonathan RiekePrintable ScienceSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgWebpage with the App Inventor project, BB-8 app icon, and the Arduino code:http://rimstar.org/science_electronics_projects/bb-8_v2_hc_05_bluetooth_rc_for_arduino.htmSee also:Making BB-8 (v2) - Painting/Details/LEDs - Part 5youtube.com/watch?v=PxG8bDkTSUI&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuStar Trek Enterprise Model with Ion Propulsion addedyoutube.com/watch?v=x5dyIIpnE0Y&list=PLFsZmHTZL-znXMyhU5jQvKsJB4zgrq3JoFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.org
LC Circuit: Selecting Coil and Capacitor RimstarOrg 2017-04-27 | ERROR!!!! The correction is that whenever the capacitor is discharged, the current it at maximum. At 1:45, 2:37 and 2:49, I remove the arrows to indicate that the current is zero while the capacitor is discharged. I shouldn't have removed them. In fact the arrows are moving in the same direction before and after those points and the arrows are thickest, meaning maximum current! How can it possibly be maximum, then zero, then maximum?! My bad. It's shown better in the animations starting at 3:16.How to select a coil and capacitor for an LC circuit, using a crystal radio as an example. This also shows about the resonance of the parallel LC circuit.This video was made possible in part by these Patreon supporters:Jonathan RiekePrintable ScienceSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:How to Design a Coil for Specific Inductanceyoutube.com/watch?v=awyLYgu6ODM&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuHow to Make Capacitors - Low Voltage Homemade/DIY Capacitorsyoutube.com/watch?v=GveI9gXIsHw&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuHow to Make/Build a Crystal Radioyoutube.com/watch?v=VqdcU9ULAlA&list=PLFsZmHTZL-zlSltC6ELZW9PK4ks7wgPRzWebpage with inductance capacitor for designing coils:http://rimstar.org/science_electronics_projects/coil_design_inductance.htmWebpage with LC resonance calculators:http://rimstar.org/science_electronics_projects/lc_circuit_aka_tank_or_resonant_circuit.htmWhere to buy a variable capacitor:http://www.midnightscience.comhttp://www.scitoyscatalog.com/category/R.html (their variable capacitor is 0 to 160pF and is for if your coil has a ferrite core and is smaller than the one in this video)Follow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgA Darker Heart - music by audionautix.com
Peppers Ghost on Smartphone RimstarOrg 2017-02-28 | Pepper's ghost on a smartphone/mobile, including how to make it and demonstrations with Star Wars AT-AT Imperial Walkers and ghosts.This video was made possible in part by these Patreon supporters:Jonathan RiekeJames PaddenPrintable ScienceSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgPepper's Ghost Ghost video:youtu.be/itvQV4XOQbEPepper's Ghost At-AT video:youtu.be/FpU2ygl2ahwThe Star Wars AT-AT Blender 3D model and animation is here:http://rimstar.org/science_electronics_projects/peppers_ghost_on_a_phone.htmSee also:Pyramid Hologram - How to Make/How it Works with Princess Leia Hologramyoutube.com/watch?v=UFhhIOaGW7U&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hTransmitting Sound using Sunlight - The Photophoneyoutube.com/watch?v=Kc9Mjzfowcs&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hThanks for Darcy (http://inventorartist.com) for help with filming.Follow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.org
Peppers Ghost Ghosts RimstarOrg 2017-02-27 | Ghosts for use with the Pepper's ghost effect. For an example of it in use, see "Pepper's Ghost on Smartphone" -youtu.be/shZUI6B5bZw.Made by filming someone in front of a green screen and then editing the result in a video editor.If you use this yourself and upload a video then I'd love to see it! Post a link to the video in the comments to my Pepper's ghost video where I first use it youtu.be/shZUI6B5bZw.
Peppers Ghost AT-AT RimstarOrg 2017-02-27 | Animated Star Wars AT-ATs for use with the Pepper's ghost effect. For an example of it in use, see "Pepper's Ghost on Smartphone" -youtu.be/shZUI6B5bZw.Done using Blender 2.71 from blender.org/.If you use this yourself and upload a video then I'd love to see it! Post a link to the video in the comments to my Pepper's ghost video where I first use it youtu.be/shZUI6B5bZw.
What is Ground? Earth Ground/Earthing RimstarOrg 2017-01-31 | What is ground and what does it mean to do Earthing? Here I answer what ground is, how it relates to your wall socket and the wiring in your appliances, how to get grounds for your high voltage and other experiments, and about the ground symbol in electrical schematics.This video was made possible in part by these Patreon supporters:Printable ScienceJonathan RiekeJames PaddenSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgFor a detailed video on grounding according to the NEC (US National Electrical Code) see Mike Holt's excellent Grounding - Safety Fundamentals (1 hour long) youtube.com/watch?v=mpgAVE4UwFw.See also:Does Volts or Amps Kill You? Voltage, Current and Resistanceyoutube.com/watch?v=9iKD7vuq-rY&list=PLFsZmHTZL-znMsTduihhoYU21XL-d3p3KPortable Crystal Radio using Loop Antenna and Pizza Boxyoutube.com/watch?v=iunAvz9PbN0&list=PLFsZmHTZL-zlSltC6ELZW9PK4ks7wgPRzHow to Read a Schematicyoutube.com/watch?v=_HZ-EQ8Hc8E&list=PLFsZmHTZL-znMsTduihhoYU21XL-d3p3KThe previous version of this video had an error in it that was too big to fix with an annotation, and so it was removed, fixed, enhanced and reuploaded. The error was a silly one on my part where I had the fault go to ground, silly because I should have realized that wasn't what happens since I knew about the ground being connected to the neutral bar in the breaker panel. A big thanks to all who brought it up in the comments to the previous version.Thanks to Matthias Wandel (youtube.com/user/Matthiaswandel) for allowing me to photograph his breaker panel and thanks to Todd Harrison (youtube.com/user/toddrharrison) for checking over this new version of the video before I released it.Follow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgA Darker Heart - music by audionautix.com
Making BB-8 (v2) - Painting/Details/LEDs - Part 5 RimstarOrg 2016-11-22 | Painting, adding details and LEDs to BB-8 (v2)'s head. This is part 5 of my Making BB-8 (v2) series.For the STL files mentioned, go to:http://rimstar.org/science_electronics_projects/bb-8_v2_painting_leds_and_detailing.htmThis video was made possible in part by these Patreon supporters:Jonathan RiekeJames PaddenSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:BB-8 Star Wars Droid - Homemade (latest version)youtube.com/watch?v=5EuI9lBtC3I&list=PLFsZmHTZL-zmztc_P7h2tqLxKJHu0vH1eHow to Move Things with Sound/Acoustic Propulsionyoutube.com/watch?v=L5fVFA2sWt4&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hHow to Make PC/Computer Monitor into High Voltage Power Supplyyoutube.com/watch?v=r32e0QGdm8U&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgmusic by audionautix.com
How to Design a Coil for Specific Inductance RimstarOrg 2016-10-31 | How to design a coil for a specific inductance that you need, including how to calculate the inductance and where to find an online inductance calculator. This goes through all the parameters: number of turns, area, length and relative permeability as well as mentioning some other factors like capacitance, frequency and coupling.The webpage with the inductance calculator is here:http://rimstar.org/science_electronics_projects/coil_design_inductance.htmThis video was made possible in part by these Patreon supporters:Jonathan RiekeJames PaddenJuliusz WojtygaSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:How to Make Capacitors - Low Voltage Homemade/DIY Capacitorsyoutube.com/watch?v=GveI9gXIsHw&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuHow to Make Tesla Coil - Small Spark Gap Tesla Coilyoutube.com/watch?v=0SaEPW_iMF8&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuHow to Make/Build a Crystal Radioyoutube.com/watch?v=VqdcU9ULAlA&list=PLFsZmHTZL-zlSltC6ELZW9PK4ks7wgPRzFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.org
Smoke Precipitator - Measuring Voltage & Demos RimstarOrg 2016-09-20 | By request, measuring the voltage needed for my electrostatic smoke precipitator and showing what's needed to power it as well as what doesn't work.This video was made possible in part by these Patreon supporters:Jonathan RiekeJames PaddenJuliusz WojtygaSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:Electrostatic Precipitator/Smoke Precipitator - How it Works/How to Makeyoutube.com/watch?v=x5YFK8mmeRQ&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hHow to Make a Van de Graaff Generator Part 2youtube.com/watch?v=QrCgtjZwnB0&list=PLFsZmHTZL-zka0LhlvO6DsH3Jd3eR816HWimshurst machine - How to make using CDsyoutube.com/watch?v=puC6-UaT9Fk&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgEssence - music by audionautix.com
How to Remove Chuck and Drill Motor RimstarOrg 2016-08-30 | How to get a motor from a cordless drill, involving mainly how to remove a chuck from a cordless drill.This video was made possible in part by these Patreon supporters:Jonathan RiekeJames PaddenSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgMy webpage about removing drill motors and chucks is here:http://rimstar.org/science_electronics_projects/how_to_remove_a_chuck_for_drill_motor.htmSee also:Directing Light with Water and Plastic - Science Shortyoutube.com/watch?v=geLnu5mJ7O8&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hMaking BB-8 Droid (v2) - Part 1youtube.com/watch?v=BCXH4AN2aog&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuHow to Make Corona Motor (v2) or Electrostatic Motor/Atmospheric Motoryoutube.com/watch?v=9uEjXsX1F14&list=PL36D7ABECE2AC9666Follow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgA Darker Heart - music by audionautix.com
Making BB-8 (v2) - Adding Gyro/BNO055 IMU - Part 4 RimstarOrg 2016-08-12 | My BB-8 wobbled whenever it stopped after going fast, so I added an IMU/gyro, the Adafruit BNO055 inertial measurement unit board and modified my Arduino program.This video was made possible in part by these Patreon supporters:Jonathan RiekeJames PaddenJuliusz WojtygaSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgThe webpage with the code is at:http://rimstar.org/science_electronics_projects/bb-8_v2_adding_adafruit_bno055_imu_gyro_board.htmSee also:BB-8 Star Wars Droid - Homemade (latest version)youtube.com/watch?v=5EuI9lBtC3I&list=PLFsZmHTZL-zmztc_P7h2tqLxKJHu0vH1eHow to Make Wireless Transmission of Electricity/Joule Thiefyoutube.com/watch?v=31Rxi8JMIys&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuFun with Arduino that Talks with Speech Synthesizeryoutube.com/watch?v=RFCJdBVkpE8&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgSound effects: http://www.freesound.org licensed under the Creative Commons 0 License.
Lightning in a Bottle & 100,000 Subscribers! RimstarOrg 2016-07-24 | How to make lightning in a bottle, using a bottle of water and a Van de Graaff generator (or any high voltage power supply.) Also, thanks for the 100,000 subscribers!Support RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:Transmitting Sound using Sunlight - The Photophoneyoutube.com/watch?v=Kc9Mjzfowcs&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8h555 Timer Chip Music Player for Maker Faireyoutube.com/watch?v=WM1bZgBqDl4&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuStirling Engine Powered by Fresnel Lens/Concentrated Solar Poweryoutube.com/watch?v=U5axWtCqgCA&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgMusic:Decisions Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0ISRC: USUAN1100756
Making BB-8 (v2) - Reattaching the Head - Part 3 RimstarOrg 2016-07-07 | Now that BB-8 has its new rigid fiberglass ball, I use new magnets and a new support structure to make the head work with it, and as you can see, it works great!This video was made possible in part by these Patreon supporters:Jonathan RiekeJames PaddenJuliusz WojtygaSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:BB-8 Star Wars Droid - Homemade (latest version)youtube.com/watch?v=5EuI9lBtC3I&list=PLFsZmHTZL-zmztc_P7h2tqLxKJHu0vH1eHow to Make High Voltage Capacitors - Homemade/DIY Capacitorsyoutube.com/watch?v=MPD7skZ8OSo&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuHow to Make a TEA Laser - Homemade/DIY Laseryoutube.com/watch?v=v9sKqGC3t-0&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgThanks to the Darcy (http://inventorartist.com) of Make613 for filming at Makerspace North.
How to Make an Ornithopter (Rubber band type) RimstarOrg 2016-06-10 | How to make an ornithopter, a rubber band type flying machine that flies by flapping its wings.This video was made possible in part by these Patreon supporters:Jonathan RiekeJames PaddenJuliusz WojtygaSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1For the super sport rubber, I bought it on ebay.com but don't see it there anymore. I think that ultimately it came from here faimodelsupply.com/product-category/tan-super-sport-rubber . Alternatively, search on google.com for "fai tan super sport rubber".Go to the main channel page here youtube.com/rimstarorgStep 0. Introduction 0:00Step 1. Making the fuselage 0:22Step 2. The two tubes for the wings to pivot on 0:47Step 3. Making the tube for the crank and front rubberband hook 1:04Step 4. Strengthening the front of the fuselage with cotton thread and glue 1:35Step 5. Making the tail frame 1:43Step 6. Making the rear motor hook 2:37Step 7. Attaching the tail and rear motor hook 2:53Step 8. Making the wing spars 3:03Step 9. Making the crank and front motor hook 3:41Step 10. Smoothing the ends of the hooks 4:36Step 11. Making the connecting rods 4:42Step 12. Making stoppers 4:55Step 13. Attaching the wing spars and connecting rods 5:04Step 14. Different types of tail and wing coverings 5:37Step 15. Removing the folds in the tissue 5:51Step 16. Marking and cutting the wing covering 5:59Step 17. Marking and cutting the tail covering 6:28Step 18. Attaching the tail and wing coverings 6:30Step 19. Adding grease/lubrication 6:58Step 20. Adjusting the tail angle 7:08Step 21. Using office/household rubberbands 7:14Step 22. Using special rubber (1/8" tan super sport rubber) 7:26Step 23. Lubricating the rubber 7:34Step 24. Winding and attaching the rubber 7:39Step 25. How to fly it and adjust the tail 8:08Step 26. Have fun! 8:22On http://www.ornithopter.org/software.shtml you can find a software tool called FlapDesign for designing the crank, connecting rods and wing spars that helps a lot if you're going to design your own.See also:Ornithopter - Rubber Band Wing Flapping Flying Machineyoutube.com/watch?v=ZvzpsRWl12s&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hHow Ion Propulsion, Lifters and Ionocrafts Workyoutube.com/watch?v=01F8V5IhB5k&list=PLFsZmHTZL-znXMyhU5jQvKsJB4zgrq3JoHand-Cranked Laser - TEA Laser Powered by Wimshurst Machineyoutube.com/watch?v=9huUsYDJZrM&list=PLFsZmHTZL-zmVo7Csiex_9co1uzWg9LTIFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgThanks to the Make613 gang at Makerspace North for all their support and in particular to Darcy (http://inventorartist.com) for his help with the rubber bands.A Darker Heart - music by audionautix.com
Ornithopter - Rubber Band Wing Flapping Flying Machine RimstarOrg 2016-05-20 | My ornithopter, a rubber band flying machine that flaps its wings like a bird.Support RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:How to Make an Ornithopter(coming soon)How to add Ion Propulsion to Star Wars TIE Fighter Model youtube.com/watch?v=oD_8_NZJF48&list=PLFsZmHTZL-znXMyhU5jQvKsJB4zgrq3JoBottle Rocket - How it Works/How to Makeyoutube.com/watch?v=gtAbs8y5xkY&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hSee here for the ornithopter webpage:http://rimstar.org/science_electronics_projects/ornithopter_rubber_band_type.htmFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgThanks to the Hack613 gang at Makerspace North for all their support and in particular to Darcy (http://inventorartist.com) for his help with the rubber bands.music by audionautix.com
Making BB-8 (v2) - How to Fiberglass - Part 2 RimstarOrg 2016-04-30 | How to do fiberglassing to make a more rigid ball for my BB-8 (v2) droid. The ball is just a cardboard globe, and with the weight of BB-8's drive system inside, the globe deforms a lot. After showing step-by-step how I put 3 layers of fiberglass on the globe, it's now so rigid that I don't notice any deforming.This video was made possible in part by these Patreon supporters:Jonathan RiekeJames PaddenSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:Making BB-8 Droid (v2) - Part 1youtube.com/watch?v=BCXH4AN2aog&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuBB-8 Star Wars Droid - Homemade (latest version)youtube.com/watch?v=5EuI9lBtC3I&list=PLFsZmHTZL-zmztc_P7h2tqLxKJHu0vH1ePeltier Module Cooling - The Peltier Effectyoutube.com/watch?v=9Cuh2msd2lo&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hFor my BB-8 (v2) webpages go to:http://rimstar.org/science_electronics_projects/bb-8_star_wars_droid_v2.htmFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.org
Backpropagation Neural Network - How it Works e.g. Counting RimstarOrg 2016-04-15 | Here's a small backpropagation neural network that counts and an example and an explanation for how it works, how it learns. A neural network is a tool in artificial intelligence that learns how to do things instead of be hand-coded. Recently it's been popularized with Google's deep dreaming neural network and Deepmind's AlphaGo beating world champion Lee Sedol at the game of go.My webpage with all the demo, neural network source code, and so on that I talked about is at:http://rimstar.org/science_electronics_projects/backpropagation_neural_network_software_3_layer.htmThis video was made possible in part by support from:Jonathan RiekeJames PaddenSupport RimstarOrg on Patreon patreon.com/user?u=680159or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htmSubscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:Does Volts or Amps Kill You? Voltage, Current and Resistanceyoutube.com/watch?v=9iKD7vuq-rY&list=PLFsZmHTZL-znMsTduihhoYU21XL-d3p3KHow a Rocket Works/Earth to Space Eg SpaceX Falcon 9 and Dragonyoutube.com/watch?v=L0AMQ6kRNMA&list=PL36D7ABECE2AC9666How a Crystal Radio Workshttp://www.youtube.com/watch?v=0-PParSmwtE&list=PLFsZmHTZL-zlSltC6ELZW9PK4ks7wgPRzFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgThe Deep dream images were made using the Deep Dream Generator at:http://deepdreamgenerator.comThe brain image was extracted from an animated GIF by Doctor Jana http://docjana.com/#/alzheimerscreativecommons.org/licenses/by/4.0/deed.en
Update - Holograms, Ornithopter, BB-8 RimstarOrg 2016-03-12 | Quick update on various projects - Hologram/Pepper's ghost using a projector, an ornithopter, and my BB-8 (v2) droid.Support RimstarOrg on Patreon patreon.com/user?u=680159Subscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgThe projector is the GM50-80lm-LED projector on banggood.com's website here:http://goo.gl/CdXlKhSee also:Pyramid Hologram - How to Make/How it Works with Princess Leia Hologramyoutube.com/watch?v=UFhhIOaGW7U&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hMaking BB-8 Droid (v2) - Part 1youtube.com/watch?v=BCXH4AN2aog&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuBottle Rocket - How it Works/How to Makeyoutube.com/watch?v=gtAbs8y5xkY&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgCrimson Fly - music from YouTube's Audio Library
Making BB-8 (v2) Droid - Part 1 RimstarOrg 2016-02-26 | Making BB-8 (v2) part 1, how to make a homemade/DIY BB-8 droid step-by-step. This uses an Arduino for the brains, and a homemade/DIY dual H-bridge motor driver for the hamster (aka tank/differential drive). More videos to come as making progresses.This video was made possible in part by support from:Jonathan RiekeJames PaddenSupport RimstarOrg on Patreon patreon.com/user?u=680159Subscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:BB-8 Star Wars Droid - Homemade (latest version)youtube.com/watch?v=5EuI9lBtC3I&list=PLFsZmHTZL-zmztc_P7h2tqLxKJHu0vH1eAdding Lasers to Star Wars TIE Fighter and Star Trek Enterprise Modelsyoutube.com/watch?v=VxIEV27AjWQ&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuHow to Make Tesla Coil - Small Spark Gap Tesla Coilyoutube.com/watch?v=0SaEPW_iMF8&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuFor my BB-8 (v2) webpages with Arduino code, STL files, schematics, and more:http://rimstar.org/science_electronics_projects/bb-8_star_wars_droid_v2.htmOff-the-shelf dual H bridge boards:http://www.robotshop.com/en/10a-5-25v-dual-channel-dc-motor-driver.htmlhttp://ledsee.com/index.php/en/new-products/bts7960-h-bridge-motor-driver-max-43a-detailpololu.com/product/2507Lewis Loflin's circuit page about controlling an H bridge from an Arduinohttp://www.bristolwatch.com/ele/h_bridge.htmFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.org
Making BB-8 Droid (v2) Quick Update RimstarOrg 2015-12-23 | A quick update on the drive system for my BB-8 version 2.Support RimstarOrg on Patreon patreon.com/user?u=680159Subscribe for new videos every week http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgThe schematic and more details for this BB-8 version 2 are at:http://rimstar.org/science_electronics_projects/bb-8_star_wars_droid_v2.htmSee also:Making a BB-8 Droid Build (v1) from Star Warsyoutube.com/watch?v=tugoaguh0aY&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuPyramid Hologram - How to Make/How it Works with Princess Leia Hologramyoutube.com/watch?v=UFhhIOaGW7U&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hStar Trek Enterprise Model with Ion Propulsion addedyoutube.com/watch?v=x5dyIIpnE0Y&list=PLFsZmHTZL-znXMyhU5jQvKsJB4zgrq3JoFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgCrimson Fly - music from YouTube's Audio Library
How to support RimstarOrg on Patreon RimstarOrg 2015-11-21 | To support RimstarOrg on Patreon go to:patreon.com/user?u=680159Subscribe for new videos every week http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgA Darker Heart - music by audionautix.com
How Powering with Atmospheric Electricity Works RimstarOrg 2015-11-14 | How atmospheric electricity works to generate electricity to power things, like a corona motor, an electrostatic motor.Support RimstarOrg on Patreon patreon.com/user?u=680159Subscribe for new videos every week http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:Atmospheric Electricity Powering a Corona Motor/Electrostatic Motoryoutube.com/watch?v=qhXxSAv6rMg&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hHow to Make Corona Motor (v2) aka Electrostatic Motor/Atmospheric Motoryoutube.com/watch?v=9uEjXsX1F14&list=PL36D7ABECE2AC9666Generate Electricity with Peltier Module - The Seebeck Effectyoutube.com/watch?v=RC16MwzFq8A&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hMore about powering using atmospheric electricity can be see on my webpage here:http://rimstar.org/science_electronics_projects/atmospheric_electricity_powering_corona_electrostatic_motor.htmSource for explanation about atmospheric electricity:The Feynman Lectures on Physics, Richard Feynman, vol. 2, section 9Caltech, Richard Feynman's old stomping ground, has been nice enough to put the lectures online for free! Here's a link to section 9 http://www.feynmanlectures.caltech.edu/II_09.html3D modelling and animation done using Blender 2.71.Follow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgA Darker Heart - music by audionautix.com
Atmospheric Electricity Powering a Corona Motor/Electrostatic Motor RimstarOrg 2015-10-31 | Using atmospheric electricity to power a corona motor, a type of electrostatic motor. To do this a wire is lifted high into the air by a hexacopter.Support RimstarOrg on Patreon patreon.com/user?u=680159Subscribe for new videos every week http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:How Power with Atmospheric Electricity Worksyoutube.com/watch?v=2rVdEhyMR6A&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hCorona Motor (v2) or Electrostatic Motor/Atmospheric Motoryoutube.com/watch?v=hpvHRHs7o7I&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hGravity Light (v2) Making and Enhancementsyoutube.com/watch?v=GisQYoYw05k&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hMore about powering using atmospheric electricity can be seen on my webpage here:http://rimstar.org/science_electronics_projects/atmospheric_electricity_powering_corona_electrostatic_motor.htmThanks to my friend for the use and flying of his hexacopter and other help on the day without whom this video would not have been possible.The hexacopter instead of balloons or kites idea came from user lasersaber youtube.com/watch?v=v5ddj6s_0ok.Follow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgEssence - music by audionautix.com
ScareDuino & Adafruit Audio FX Sound Board for Halloween RimstarOrg 2015-10-23 | Improved ScareDuino, my Arduino controlled skull, using the Adafruit Audio FX Sound Board. Includes demos and details on how to use the Audio FX Sound Board.Support RimstarOrg on Patreon patreon.com/user?u=680159Subscribe for new videos every week http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgFor the code/Arduino sketch I showed in the video, as well as a full circuit diagram, go to:http://rimstar.org/science_electronics_projects/arduino_adafruit_audiofx_soundboard_skull_scareduino.htmAdafruit Audio FX Sound Board + 2x2W Amp - WAV/OGG Trigger -16MB:http://www.adafruit.com/products/2217Adafruit's learning section all about the board:learn.adafruit.com/adafruit-audio-fx-sound-boardSee also:How to Make ScareDuino - Arduino controlled Skull with Servo, LEDs, Speakeryoutube.com/watch?v=K2fAc0P1aJc&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuFun with Arduino that Talks with Speech Synthesizeryoutube.com/watch?v=RFCJdBVkpE8&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuWhy Blowing in Bottles Makes Sound and Helmholtz Resonanceyoutube.com/watch?v=PZVeJ2rh6ts&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgMusic used throughout:Bicycle Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0ISRC: USUAN1100870
The Photoelectric Effect and How it Works RimstarOrg 2015-10-10 | The photoelectric effect including what is the photoelectric effect and how it works. I use a fluorescent lamp black light for the ultraviolet light, a zinc metal plate and an electroscope for doing a demonstration of the experiment.Support RimstarOrg on Patreon patreon.com/user?u=680159Subscribe for new videos every week http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgFor more in-depth detail about how the photoelectric effect works, see my webpage here:http://rimstar.org/science_electronics_projects/photoelectric_effect.htmSee also:How to make an electroscope (DIY)youtube.com/watch?v=2PmWlPjV6n0&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hTriboelectric effect/series or triboelectricityyoutube.com/watch?v=ey88EdZo9hU&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hCurie Temperature/Point Rotor - How it's Made/How it Worksyoutube.com/watch?v=9QLiy0Po-tM&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8h3D modelling and animation done using Blender 2.71.Follow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgEssence - music by audionautix.comSound effects: http://www.freesound.org licensed under the Creative Commons 0 License.
Remote Control Drill Motor & How a MOSFET Works RimstarOrg 2015-10-03 | WARNING - The drill battery in the circuit diagram is drawn backwards by accident. The plus sign beside the drill battery should be a minus and the minus sign beside the drill battery should be a plus sign. That means some of the red and black lines should reverse colors too. The black lines going to and from the drill motor should especially be red for clarity, just as the red line going to the source should be black for clarity. Everything else in the video, including how the circuit is ACTUALLY wired up and the MOSFET explanation is correct. Unfortunately (or fortunately) there have been so many useful comments that I'm reluctant to remove this video.---Making a remote controlled drill motor circuit and a bit on how a MOSFET works.Support RimstarOrg on Patreon patreon.com/user?u=680159Subscribe for new videos every week http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:BB-8 Droid Build (v1) from Star Wars - Homemadeyoutube.com/watch?v=On8v4UMQogA&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuHow to Make 30kV High Voltage DC Power Supply with Flyback & Cockcroft-Walton Multiplier Tripleryoutube.com/watch?v=GEuK1OdYxHk&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuHow a Van de Graaff Generator Worksyoutube.com/watch?v=EsZQS2GOMQE&list=PLFsZmHTZL-zka0LhlvO6DsH3Jd3eR816HFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgA Darker Heart - music by audionautix.com
Directing Light with Water and Plastic - Science Short RimstarOrg 2015-09-25 | Directing light using a water fountain and plastic, the same way fiber optics works. Includes fun demos and the science behind it.Support RimstarOrg on Patreon patreon.com/user?u=680159Subscribe for new videos every week http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:How a Prism Works to Make Rainbow Colorsyoutube.com/watch?v=JGqsi_LDUn0&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hPinhole Camera - How to Makeyoutube.com/watch?v=0Bx8P4EvYLA&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hHow to Make a Laser Communicator (to Solar Cell)youtube.com/watch?v=yZ7PrWUVWP8&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hInspiration came from the "light fountain" in this wikipedia articleen.wikipedia.org/wiki/Optical_fiber#History.Follow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgSound effects: http://www.freesound.org licensed under the Creative Commons 0 License.Music used throughout:"The Whip (Extended Version)"Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Making a BB-8 Droid Build (v1) from Star Wars RimstarOrg 2015-09-18 | BB-8 droid build (v1) or how I made version 1 of a BB-8 droid from the new Star Wars movies.Support RimstarOrg on Patreon patreon.com/user?u=680159Subscribe for new videos every week http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:BB-8 Star Wars Droid - Homemade (latest version)youtube.com/watch?v=BCXH4AN2aog&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuAdding Lasers to Star Wars TIE Fighter and Star Trek Enterprise Modelsyoutube.com/watch?v=VxIEV27AjWQ&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuHow to Make Music Instruments with Straws - Trombone and Trumpetyoutube.com/watch?v=8zrsx8V8XwQ&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hFor my main BB-8 webpage, see...http://rimstar.org/science_electronics_projects/bb-8_star_wars_droid_homemade.htm... and for my BB-8 page specifically about this verison 1, see:http://rimstar.org/science_electronics_projects/bb-8_star_wars_droid_v1.htmFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgA Darker Heart - music by audionautix.com
BB-8 Droid Build (v1) from Star Wars - Homemade RimstarOrg 2015-09-11 | DIY BB-8 droid build from the new Star Wars movies (v1). This one is a prototype that has a head that stays on as it moves.Support RimstarOrg on Patreon patreon.com/user?u=680159Subscribe for new videos every week http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:How to Make BB-8 Droid Build (v1) from Star Warsyoutube.com/watch?v=tugoaguh0aY&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuBB-8 Star Wars Droid - Homemade (latest version - v2, part 1)youtube.com/watch?v=BCXH4AN2aog&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuNitinol Wire/Shape Memory Alloy Inchworm - How it Worksyoutube.com/watch?v=wKoc7-APFsk&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hFor my main BB-8 webpage, see...http://rimstar.org/science_electronics_projects/bb-8_star_wars_droid_homemade.htm... and for my BB-8 page specifically about this verison 1, see:http://rimstar.org/science_electronics_projects/bb-8_star_wars_droid_v1.htmFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgCrimson Fly - music from YouTube's Audio Library
Maker Hand Tools - Favorites RimstarOrg 2015-09-05 | Hand tools for makers - my favorites and how I've used them in many different projects.Support RimstarOrg on Patreon patreon.com/user?u=680159Subscribe for new videos every week http://www.youtube.com/user/rimstarorg?sub_confirmation=1Go to the main channel page here youtube.com/rimstarorgSee also:Wimshurst machine - How to make using CDsyoutube.com/watch?v=puC6-UaT9Fk&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuGravity Light (v2) Making and Enhancementsyoutube.com/watch?v=GisQYoYw05k&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8hHow to Make CFL Powered by Electric Fly Swatter/Racket Zapperyoutube.com/watch?v=ONAVPnp9WcQ&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVuFollow behind-the-scenes on:Twitter twitter.com/#!/RimStarzGoogle+ plus.google.com/116395125136223897621Facebook facebook.com/rimstarorghttp://rimstar.orgSound effects: http://www.freesound.org licensed under the Creative Commons 0 License.A Darker Heart - music by audionautix.com
