What is Autoclaved Aerated Concrete (AAC or Aircrete)? Aircrete Europe 2017-09-07 | Autoclaved Aerated Concrete, also known as AAC or aircrete, is a green precast building material present in the global market for over 70 years. AAC blocks and AAC panels are produced in hundreds of plants around the world, AAC is extensively used in residential, commercial and industrial construction.AAC is an eco-friendly building material, made from natural raw materials such as: sand (or fly-ash), cement, lime, gypsum, aluminium powder and water. This mix creates an aerated concrete providing insulation, structure and fire protection in one lightweight product.For more information about AAC, visit our website: aircrete.com/about-aac/#advantages#AAC #AACProduction #AACPlant
Aircrete Europe at Bauma 2022 Aircrete Europe 2022-11-14 | Aircrete Europe was present at Bauma 2022. We were very happy to welcome an enormous amount of people from all over the world on our stand, meet in person after covid years, and discuss how the Aircrete technology can contribute to the global challenges of energy savings, housing shortages and the need for a sustainable, prefab, building solution. In case you missed out on the opportunity to visit us at Bauma last week, reach out to us at www.aircrete.com.See you at the next Bauma fair in 2025!#Bauma #AAC #Aircrete
Automatic mixer cleaning unit Aircrete Europe 2022-09-29 | Aircrete Automatic Mixer Cleaning Unit consists of high-pressured nozzles spraying the water inside the mixer. It is desirable for high-capacity AAC factory to reduce the amount of manual cleaning and save overall cleaning time (i.e. increase the overall capacity of the plant). Periodically, directly after the mix has been released into a mould, the high-pressure nozzle heads wash down the residue off the mixer body using water. The water goes down the mixer outlet and charge either into the slurry tank or partially substitute the process water. This system is an addition to the batch-by-batch cleaning which uses the process water.Advantages:• High-pressure spraying nozzles• Faster mixer cleaning• Increased operator safety • Improved operation efficiencyInterested in Aircrete's innovations and solutions for your AAC plant? Contact us! aircrete.com/contact-us#AACproduction #AACplant #Aircrete
Automatic hardness and temperature measurement unit Aircrete Europe 2022-09-01 | Stand-alone Automatic Green Cake Hardness and Temperature Measurement unit allows for very quick and extremely reliable measurement of green cake hardness and its temperature, resulting in improved safety and reduction of time for personnel and reliable data on cake rising process. In addition, incorporation of data in plant control system results in better control of production process.Advantages of Automatic hardness and temperature measurement unit: • Quick and reliable measurement • Increased level of safety • Time efficiency of operators • Continuous quality controlInterested in Aircrete's innovations and solutions for your AAC plant? Contact us! aircrete.com/contact-us#AACproduction #AACplant #Aircrete
Building Information Modeling (BIM) Aircrete Europe 2022-06-20 | Aircrete integrates Building Information Modeling (BIM) in the projects. BIM is a process used for managing information throughout a project’s lifecycle via an intelligent cloud-based model, that integrates into multidisciplinary data. From design through construction to installation and operation, Building Information Modeling coordination allows for cost reduction, faster construction and installation, and better quality overall. Advantages of BIM project implementation: • Efficient project execution• Faster installation• Error elimination• Cost reductionInterested in Aircrete's innovations and solutions for your AAC plant? Contact us! aircrete.com/contact-usRead more about BIM solution for AAC factory: aircrete.com/aircrete-news/integration-of-building-information-modeling-bim-in-aircrete-europes-projects#AACproduction #BIM #Aircrete #AACplant
High speed cutting frame Aircrete Europe 2022-05-19 | The Aircrete High Speed Cutting Frame (HSCF) is a unique part of the Aircrete Flat-Cake Cutting Line and is designed for high-quality AAC blocks and panels production. The double-wired cutting system results in an ultra-precision thickness cut at the green stage in combination with a Super Smooth surface of the final product (minimizing plastering works on site). Advantages of the high speed cutting frame:• High speed oscillating wires• Double wires• Super smooth surfaces• Superior accuracy• No separation requiredInterested in Aircrete's innovations and solutions for the cutting line in your AAC plant? Contact us: aircrete.com/contact-us#AACproduction #CuttingLine #Aircrete #AACplant
Inclined cross cutter Aircrete Europe 2022-03-25 | The inclined cross cutter increases optimization of raw materials and energy consumption, allows for easier top layer removal and higher quality of the product by inclined positioning of the cutting frame. In addition, through the programmable speed of the frame, the Aircrete Cross Cutter fits seamlessly within the factory cycle time.Advantages of inclined cross cutter:• Improved top layer removal• Flexible programming• Increased product quality• Thinner top layerInterested in Aircrete's innovations and solutions for your AAC plant? Contact us! aircrete.com/contact-usRead more about the factory upgrade with this solution: aircrete.com/aircrete-news/xella-engages-aircrete-europe-to-improve-a-cutting-line#AACplant #CuttingLine #Aircrete
Automatic pin stacking unit Aircrete Europe 2022-03-10 | Automatic pin stacking manipulator improves the production process by increasing the level of automation and creating a safe working conditions. The automatic pin stacking unit allows for reduced risk of a human error, improving the process consistency and, ultimately, saving on operational costs of the plant.Advantages of automatic pin stacking manipulator:• Fully automatic operation• Accurate positioning• Fully in line with factory cycle timeInterested in Aircrete's innovations and solutions for your AAC plant? Contact us! aircrete.com/contact-us#AACproduction #AACplant #Aircrete
Plant overview - AAC panel plant for Luoyang Evergreen in China Aircrete Europe 2022-01-27 | Find out about the AAC plant design, construction, maintenance, production process and more at aircrete.com#AACProduction #AACPlant #Aircrete
Plant overview - AAC panel plant for Yuanzhu Housing in China Aircrete Europe 2022-01-17 | Aircrete Europe and Aircrete China have proudly completed their first AAC plant project for Zhejiang Yuanzhu Housing Industrialization Co. Ltd. (Yuanzhu), which is a subsidiary of Dingyuan Group and a leading building material producer in China. The AAC plant is aiming for a production capacity of 500,000 cubic meters per year, of which predominantly AAC panels. It is Aircrete´s most advanced AAC production line in China, with the highest level of automation, new AAC panel production features and an intelligent AAC plant control system.aircrete.com#AACProduction #AACPlant #Aircrete
Bottom profiling Aircrete Europe 2022-01-05 | Bottom profiling with dynamic double profiling knives occurs right under the grabbing crane, when the product is lifted from the mould.Profiling in the green stage is a fast and efficient way to profile AAC products that easily meet the highest European accuracy standards. It also ensures zero waste production towards a "green" plant.Features and benefits of Aircrete bottom profiling solution: • Excellent tolerance on final product• Easy green waste collection for recycling• Double knife for quick profile changeoverInterested in Aircrete's innovations and solutions for your AAC plant? Contact us! aircrete.com/contact-us#AACproduction #AACProfiling #Aircrete #AACplant
Surface pattern milling on AAC cladding panels Aircrete Europe 2021-11-16 | Our pattern milling system is designed to create patterns and designs on the surface of the AAC (thin) panels. The most common usage observed in the market is for the cladding panels in the form of façade and surfacing applications. This fully programable CNC milling system can mill two panels at once in one cycle. The infeed and outfeed can be performed either manually or automatically, while the surface milling is done fully automatically as per the preprogrammed design. As a standalone unit, it can be placed in any AAC panel making factory.Benefits of cladding panel pattern milling: • Premium product addition to portfolio• Diversity of patterns & designs• In-line & off-line solutions available• Various panel dimensions possibleInterested in Aircrete's innovations and solutions for your AAC plant? Contact us! aircrete.com/contact-us#AACproduction #AACpanels #Aircrete #AACplant
Aircrete cuts the first cake at Zhejiang Yuanzhu Aircrete Europe 2021-09-28 | August 20, 2021, a major milestone for our customer Zhejiang Yuanzhu Housing Industrialization Co. Ltd. and Aircrete, when the first cake is produced.aircrete.com#AACProduction #AACPlant #Aircrete
Together we build your success Aircrete Europe 2021-09-02 | Aircrete Europe is the only technology partner that has experience with running its own factories. Therefore understands better than anyone else what it takes to make your AAC business successful. From initial concept on the drawing table, throughout the entire installation process, to an operating plant with life-time aftercare and support.Contact us for more information: aircrete.com/contact-us#AACProduction #AACPlant #Aircrete
Innovative AAC production technology Aircrete Europe 2021-09-02 | Aircrete Europe delivers the best-in-class innovation and technology. Our efficient plant design requires minimum foundation work and results in quick installation on site. Our high-capacity and large-volume panel plants have an efficient production process, zero waste, low energy consumption and a high level of automation to produce a large variety of products in high volumes.In the after treatment, our solutions allow for high-precision cutting and profiling.Our unique flat-cake cutting technology is specifically designed for panel production and therefore only on an Aircrete cutting line thinner panels of less than 100mm can be sustainably produced. With distinctive characteristics like customized patternsSuper smooth surfaces to minimize finishing requirementsUltra-thing panels for cladding applicationsAnd extra long elements for efficient installationaircrete.com#AACProduction #AACPlant #Aircrete
Global leader in AAC production technology Aircrete Europe 2021-09-02 | Aircrete Europe is the global leader in AAC panel technology, with over 100 reference projects and sales on all 6 continents globally. With decades of experience originated in the seventies, we have grown to become your integrated partner for the complete range of AAC solutions. From full turn-key projects in developed and emerging markets to complex upgrades and modernizations in existing factories; from lab analysis, consulting and engineering services to ongoing maintenance and support services for our long term customers.Find out more: aircrete.com#AACProduction #AACPlant #Aircrete
Aircrete Building System for a greener future Aircrete Europe 2021-09-02 | With new, innovative solutions Aircrete Europe contributes to a more sustainable and greener world. The world of tomorrow demands a faster, modular and more efficient solution based on prefabricated, high-quality elements for a wide range of applications. Such as residential units, industrial warehouses and shopping malls. Aesthetic enhancements with pre-milled patterns, internal partitioning walls for hotels and apartments.Exterior cladding applications to combine with wood and steel structures,load bearing roof and floor slabs, walls in high-rise construction projectsand a full load-bearing AAC building solutionFind out more: aircrete.com/aircrete-building-system/#construction_methodology#AAC #AACProduction #AACPlant
White panel pack milling unit Aircrete Europe 2021-08-17 | Aircrete Europe created a solution that allows for the profiling of a complete pack of panels at once, with a complete range of profiling options such as tongue and groove, chamfers, or any other specific shape. The panel pack milling unit profiles the AAC panels over the full length with high accuracy and fast cycle times.Features and benefits of white panel pack milling system: • Highest quality profiles • Exact tolerances• Deep and special profiles possible• Full dust recyclingInterested in Aircrete's innovations and solutions for your AAC plant? Contact us! aircrete.com/contact-us#AACProduction #AACpanels #AACplant
Automatic end crust removal system Aircrete Europe 2021-07-20 | This video shows an upgrade performed in an old Hebel plant with the automatic end crust removal system from Aircrete Europe.Features and benefits of an automatic end-crust removal system: • Reliable mechanical system• Flexible end-crust dimension• Energy efficiency• Suitable for any AAC plant typeInterested in Aircrete's innovations and solutions for your AAC plant? Contact us! aircrete.com/contact-us#AACproduction #Aircrete #AAC
Reinforcement frame preparation Aircrete Europe 2021-06-22 | The automated reinforcement configuration allows for full automation of the reinforcement production, preparation and assembly without the need for a single operator. Any desired reinforcement design, whether it is a bar, single mesh or cage, can be used in the process at the moment it is needed.Integrating this unique Aircrete reinforcement solutions into an AAC factory brings the operations to the next level: versatile, large-volume and fully- automated AAC panel production.Advantages of reinforcement frame preparation:• Just-in-time production • No operators required • Full product traceability • Higher flexibilityInterested in Aircrete's innovations and solutions for your AAC plant? Contact us! aircrete.com/contact-us#AACproduction #AACreinforcement #AACplant
Automatic autoclave traverser TT3 Aircrete Europe 2021-05-20 | Aircrete autoclave traverser loads and unloads the autoclaves in fully automated mode with no need of operators, autoclave cars or bridge, resulting in optimized operational efficiency.Advantages of automatic TT3:• High autoclave utilization due to fast unloading/loading• No operators required• No need of autoclave cars • No autoclave bridge requiredInterested in Aircrete's innovations and solutions for your AAC plant? Contact us! aircrete.com/contact-us#AACproduction #AACplant #Aircrete
Automatic mould door manipulator Aircrete Europe 2021-04-20 | Automatic mould door manipulator allows for automatic adjustment of the mould length without using separate damming walls. Through the pin positions on the sides of the mould, the automated door manipulator picks the movable door out of the door carrier and places it on the desired position. Advantages of automatic mould door manipulator:• Absolute flexibility• Zero waste• Easy cleaning & oiling• No leakage• Fully automated positioningInterested in Aircrete's innovations and solutions for your AAC plant? Contact us! aircrete.com/contact-us#AACproduction #AACplant #Aircrete
Aircrete mould brushing & oiling Aircrete Europe 2021-03-09 | Aircrete moulds open fully for fast, thorough brushing and cleaning, while micro nozzles ensure accurate and minimal oil usage for optimal results.Advantages of automatic mould brushing and oiling:• Fully open moulds• Minimal waste• Easy and accurate cleaningInterested in Aircrete's innovations and solutions for your AAC plant? Contact us! aircrete.com/contact-us#AACproduction #AACinnovations #AACplant
About Aircrete China Aircrete Europe 2020-09-03 | Aircrete China, a subsidiary of Aircrete Europe, started its operations in December 2019 in Shanghai. This local office is aimed to capture China`s growth potential for AAC panels production and applications. Andre Antonow, the General Manager of Aircrete China explains the environment-friendly and green building material initiatives in China and the role Aircrete China plays in this world`s largest AAC market.aircrete.com/zh-hans#AACProduction #Aircrete #AACPlant
Aircrete Mexico Commercial Video Aircrete Europe 2019-11-27 | Aircrete Mexico creates an eco-system that focuses on innovation, quality and operation performance among its staff, customers and investors chain.aircrete.com#AACProduction #AACPlant #Aircrete
Aircrete Europe | Leading AAC Production Technology Aircrete Europe 2019-04-05 | Aircrete Europe is the recognized global leading developer and manufacturer of Autoclaved Aerated Concrete (AAC) machinery and technology for the production of AAC panels and blocks.aircrete.com0:00 Intro0:46 Building solutions for a greener future1:27 Best-in-class innovative technology2:26 Together we build your success2:51 We create solutions#AAC #AACPlant #Aircrete
Mark Rutte mentions Aircrete Europe Aircrete Europe 2019-01-08 | Dutch Prime Minister Mark Rutte mentions Aircrete Europe among big names like KLM in his speech at the "Dutch Business Event". The event was oriented to the Dutch business circle in Argentina and organized by the Embassy of The Netherlands in Buenos Aires within the framework of the G20 Summit 2018.Find out more about our company: aircrete.com#AACPlant #AAC #Aircrete
Aircrete Europe wins WTC Twente Export Award 2018 Aircrete Europe 2018-07-04 | The global leader in AAC panel technology, Aircrete Europe is awarded WTC Export Award 2018. WTC Export Award a yearly award that is given to the company or organization that has demonstrated to have the most successful international strategy with demonstrated global success.aircrete.com/aircrete-news#TwenteExport #AAC #Aircrete
Services for optimizing AAC production process and product quality Aircrete Europe 2018-06-18 | Our organization constantly invests in innovation and process technology to optimize the production process and product quality. A dedicated team of production managers, mechanics, operators, chemists, mechanical, electrical & software engineers as well as business developers is ready to share their in-depth expertise covering the entire AAC value chain.Find out more about our plant solutions: aircrete.com/our-solutions/#plant-solutions#AACProduction #AACPlant #Aircrete
Unique Flat Cake Cutting Technology Aircrete Europe 2018-06-18 | Our innovative cutting process involves a horizontally positioned cake, which is the only technology to make SUPER SMOOTH and 8 meter long panels. Double oscillating wires in the High Speed Cutting Frame provides a SUPER SMOOTH product surface.Find out more: aircrete.com/unique-technology/#flat-cake-technology#AACProduction #AACpanels #Aircrete
About Aircrete Europe Aircrete Europe 2018-06-18 | Aircrete Europe is the technology and solution partner for AAC panels and blocks production. We design and deliver the most innovative turn-key AAC plants and cutting-edge plant technology around the world.aircrete.com#AACProduction #Aircrete #AACPlant
Interview with Corniels Tavenier on World Trade Day Aircrete Europe 2017-12-06 | Interview with Corniels Tavenier (Commercial Director of Aircrete Europe) on World Trade Day 2017. We discovered international trading opportunities in one-on-one discussions with representatives from various countries during the event. On that day, Corniels Tavenier had also an interview with RTV Oost.aircrete.com/about-us/#board-of-directors#AAC #Aircrete #AACPlant
Aircrete Europe - Introduction to AAC and AAC technology Aircrete Europe 2017-08-31 | 00:00 About Aircrete Europe01:30 Aircrete Cutting Technology02:48 AAC Plant Services and Solutions04:38 Autoclaved Aerated ConcreteLet’s talk about AAC. We look forward to discussing your new AAC project or operations improvements of your AAC plant. As AAC technology partner we design, deliver, and operate the most innovative AAC plants for blocks and panels production worldwide. Our expertise and turn-key service is based on more than 40 years of AAC industry experience and uses our own flat-cake horizontal cutting technology enabling the production of a wide portfolio of reinforced AAC products.Visit our website for more information: aircrete.com#AACPlant #AAC #Aircrete
Autoclaved Aerated Concrete (AAC) Production Process - Mexico Aircrete Europe 2016-06-07 | The production process of Autoclaved Aerated Concrete (AAC) products in the Aircrete Mexico plant, the biggest AAC plant in Latin America. Aircrete Europe delivered the project as a turn-key supplier, supporting the Mexican partner on every step of the project, from plant engineering and machine design to equipment delivery, installation and commissioning.#AACProduction #AACPlant #Aircrete
The Aircrete Building System Aircrete Europe 2016-05-23 | A building crew of four people is building a single-family house in two days with Autoclaved Aerated Concrete (AAC) panels. This building, being constructed in the Netherlands, is in full compliance with the latest EU regulations. The AAC panels used are reinforced with steel and that gives the necessary strength and load-bearing capacities. Please note that AAC can be produced in different densities and corresponding compressive strengths for each country. Besides, the method of designing and building AAC structures varies from country to country. To find more about this great building material please visit: aircrete.com/about-aac/#advantages#AAC #AACProduction #AACPlant
Aircrete Europe at Bauma 2016 Aircrete Europe 2016-05-02 | Aircrete Europe was present at Bauma 2016. Thank you for visiting our booth, see you at the next Bauma fair in 2019!Find out more about our upcoming events: aircrete.com/aircrete-news#Bauma #AAC #Aircrete
Производство Автоклавного Ячеистого Бетона - Aircrete Aircrete Europe 2015-04-09 | Как производится АГБ? Производства Автоклавного Газобетона, завод с технологией Aircrete Europe (Голландия). Читайте и смотрите больше на нашем вебсайте www.aircrete-europe.ru#AACProduction #AACPlant #Aircrete
Autoclaved Aerated Concrete (AAC) Production Process - Kakhovka Aircrete Europe 2013-10-17 | Autoclaved Aerated Concrete Plant - Aircrete - AAC Production. Advanced Technology by European technology expert Aircrete Europe. Read more on: http://www.aircrete-europe.comOn video: The biggest AAC plant in Eastern Europe, owned and run by a leading AAC producer "Energy Product" (Ukraine). A unique flat-cake cutting line for an AAC plant. Our Dutch technology is the heart of a modern Aircrete AAC Plant. Blocks, panels and boards as thin as 3,5cm can be produced with the highest accuracies (below 1mm) and without any waste. Reinforced elements (floor, wall, roof panels, lintels) can also be produced. Aircrete Cutting Line makes the surface of AAC products SUPER SMOOTH minimizing finishing costs of construction on-site.Aircrete Europe offers turn-key plant solutions as well as upgrades of existing AAC factories from different technologies (HEBEL, SIPOREX, YTONG, DUROX, STEMA, TILT CAKE and more).#AACProduction #AACPlant #Aircrete
Aircrete (AAC) Production - 3/3 Autoclaving and Packing Aircrete Europe 2013-10-17 | Technology by Aircrete Europe - http://www.aircrete-europe.comOn video: The biggest AAC plant in Eastern Europe, owned and run by a leading AAC producer "Energy Product" (Ukraine). Read more on: http://gazobeton.ks.ua/ru/about/1/ A unique flat-cake cutting line for an Autoclaved Aerated Concrete Plant. This Dutch technology is a heart of a modern AAC Plant. Blocks, panels and boards as thin as 3,5cm can be produced with highest accuracies (below 1mm) and without any waste. Reinforced elements (floor, wall, roof panels, lintels) can also be produced. Aircrete Cutting Line makes the surface of AAC products SUPER SMOOTH minimizing finishing costs of construction on-site.Aircrete Europe offers turn-key plant solutions as well as upgrades of existing AAC factories from different technologies (HEBEL, SIPOREX, YTONG, DUROX, STEMA, TILT CAKE and more).#AACProduction #AACPlant #Aircrete
Aircrete (AAC) Production - 2/3 Cutting Line System Aircrete Europe 2013-10-17 | Technology by Aircrete Europe - http://www.aircrete-europe.comOn video: The biggest AAC plant in Eastern Europe, owned and run by a leading AAC producer "Energy Product" (Ukraine). Read more on: http://gazobeton.ks.ua/ru/about/1/ A unique flat-cake cutting line for an Autoclaved Aerated Concrete Plant. This Dutch technology is a heart of a modern AAC Plant. Blocks, panels and boards as thin as 3,5cm can be produced with highest accuracies (below 1mm) and without any waste. Reinforced elements (floor, wall, roof panels, lintels) can also be produced. Aircrete Cutting Line makes the surface of AAC products SUPER SMOOTH minimizing finishing costs of construction on-site.Aircrete Europe offers turn-key plant solutions as well as upgrades of existing AAC factories from different technologies (HEBEL, SIPOREX, YTONG, DUROX, STEMA, TILT CAKE and more).#AACProduction #AACPlant #Aircrete
Aircrete (AAC) Production - 1/3 Raw Materials and Casting Aircrete Europe 2013-10-17 | Technology by Aircrete Europe - http://www.aircrete-europe.comOn video: The biggest AAC plant in Eastern Europe, owned and run by a leading AAC producer "Energy Product" (Ukraine). Read more on: http://gazobeton.ks.ua/ru/about/1/ A unique flat-cake cutting line for an Autoclaved Aerated Concrete Plant. This Dutch technology is a heart of a modern AAC Plant. Blocks, panels and boards as thin as 3,5cm can be produced with highest accuracies (below 1mm) and without any waste. Reinforced elements (floor, wall, roof panels, lintels) can also be produced. Aircrete Cutting Line makes the surface of AAC products SUPER SMOOTH minimizing finishing costs of construction on-site.Aircrete Europe offers turn-key plant solutions as well as upgrades of existing AAC factories from different technologies (HEBEL, SIPOREX, YTONG, DUROX, STEMA, TILT CAKE and more).#AACProduction #AACPlant #Aircrete
AAC Industrial Wall Panel - 3/3 Fast Installation Aircrete Europe 2013-10-17 | The Installation of Aircrete (AAC) wall panels is fast and easy. Find more information about the product application and characteristics on http://www.aircrete-europe.comAutoclaved Aerated Concrete wall panels made using Aircrete Europe technology in an European AAC Plant. AAC Reinforced Panels have versatile applications, ideal for industrial and commercial buildings, shopping malls, warehouses.#AACPanels #AAC #Aircrete
AAC Industrial Wall Panel - 2/3 Lifting and Positioning Aircrete Europe 2013-10-17 | The Installation of Aircrete (AAC) wall panels is fast and easy. Find more information about the product application and characteristics on http://www.aircrete-europe.comAutoclaved Aerated Concrete wall panels made using Aircrete Europe technology in an European AAC Plant. AAC Reinforced Panels have versatile applications, ideal for industrial and commercial buildings, shopping malls, warehouses.#AACPanels #AAC #Aircrete
AAC Industrial Wall Panel - 1/3 Transport and Handling Aircrete Europe 2013-10-17 | The Installation of Aircrete (AAC) wall panels is fast and easy. Find more information about the product application and characteristics on http://www.aircrete-europe.comAutoclaved Aerated Concrete wall panels made using Aircrete Europe technology in an European AAC Plant. AAC Reinforced Panels have versatile applications, ideal for industrial and commercial buildings, shopping malls, warehouses.#AACPanels #AAC #Aircrete
Aircrete Flat Cake Cutting Line Aircrete Europe 2013-10-04 | The Flat-cake Cutting Technology by Aircrete Europe, learn more about this technology on http://www.aircrete-europe.comA unique flat-cake cutting line for an Autoclaved Aerated Concrete Plant. This Dutch technology is a heart of a modern AAC Plant. Blocks, panels and boards as thin as 3,5cm can be produced with highest accuracies (below 1mm) and without any waste. Reinforced elements (floor, wall, roof panels, lintels) can also be produced. Aircrete Cutting Line makes the surface of AAC products SUPER SMOOTH minimizing finishing costs of construction on-site.Aircrete Europe offers turn-key plant solutions as well as upgrades of existing AAC factories from different technologies (HEBEL, SIPOREX, YTONG, DUROX, STEMA, TILT CAKE and more).#AACProduction #AACPlant #Aircrete
Aircrete AAC Partition Panel Installation Aircrete Europe 2013-10-04 | Autoclaved Aerated Concrete (AAC) Partition Panel installation is fast and easy. Read more at: aircrete.com/en/aircrete-building-system/#product_specificationsAircrete Partition Panels are a superior building solution for all internal applications. Paint or wallpaper can be directly applied on panels.#AACPanels #AAC #Aircrete
