Squadaloo
Boos Breakable Bastion - Super Mario Maker
updated
This episode was recorded in early April, hence why I'm replying to comments made a while ago. In fact, originally as I talk about in this episode I only wanted to release these episodes once I already have the footage ready for the next one, but I'm changing that now as I have zero footage done for the next episode and am not sure when I'll have the time or drive to start it. Plus, it's dumb for me to respond to comments that are several episodes old.
0:00 Introduction, Thoughts on Mario Kart 8, Mario Kart Stadium, and Water Park
5:45 Sweet Sweet Canyon by TheGamingBram
9:07 Thwomp Ruins by SquireTurnbolt
12:50 Mario Circuit by TheGamingBram
16:36 Twisted Mansion by TheGamingBram
20:30 Thoughts on Toad Harbor and Shy Guy Falls, and Mario Kart 8 in General
22:50 Sunshine Airport by Diego Vapy
26:33 Dolphin Shoals by MrFluffy
29:55 Electrodrome by SquireTurnbolt
32:50 Thoughts on Mount Wario
34:55 Cloudtop Cruise by Deigo Vapy
39:05 Bone-Dry Dunes by Luca
42:30 Thoughts on Bowser's Castle
43:15 Rainbow Road by Squadaloo
48:20 Wild Woods by TheGamingBram (And thoughts on Wii U nitros before Wild Woods)
52:16 Thoughts on Super Bell Subway
52:55 Animal Crossing by ZPL
56:30 Preview for next episode and Outro
Switch: gamebanana.com/mods/440750
This is a heavily modified port of 3DS Mario Circuit from Mario Kart Tour with some remodeling and retexture work done by me. The cliffs and other objects were remodeled to fit more in with the base game.
There are two versions of the track: one goes over N64 Royal Raceway and has falling cherry blossom petals but a green mushroom instead of a bouncy red one. This version is available for Wii U and Switch.
The 2nd Switch version of the track replaces 3DS Toad Circuit and has the proper bouncy red mushroom object (Booster Pass objects don't work outside of the Booster Pass as far as I can tell), but loses the falling cherry blossom petals since it's no longer in Royal Raceway's slot. This has the benefit of actually saying 3DS instead of N64 (I have no way to change prefixes on retro courses that already have one) but loses a bit of presentational flair as a result.
Before anybody asks (and I know nobody will read this and they will ask), no, I'm not porting or remaking any other retro Mario Kart tracks at this time. This was a calculated risk of a course that I was 99.99999% confident wasn't coming to the Booster Pass and being a Mario Circuit, I had plenty of textures to pull from making this a much easier job than say Wario Shipyard which would require more custom texturework.
This took a little less than two weeks from start to finish and I'm pretty happy with how it turned out.
Also, sorry, I didn't realize until editing this how many times I went on a long rant while just sitting on the menu screens.
0:00 Introduction and General Thoughts on Mario Kart 7
1:50 Toad Circuit by SKMaric
5:10 Daisy Hills by Atlas
7:50 Cheep Cheep Lagoon by Tock
8:25 Cheep Cheep Lagoon by Tock (for real this time)
10:54 Shy Guy Bazaar by Atlas
14:13 Wuhu Loop by FunkyDude15, Riidefi, and Zachruff
18:20 Mario Circuit by ZPL and Bri
22:09 Music Park by Atlas
26:20 Rock Rock Mountain by MrKoeiKoei and zilly
31:00 Piranha Plant Slide by Atlas
36:21 Wario Shipyard by Atlas
40:50 Neo Bowser City by Atlas
45:07 Maka Wuhu by FunkyDude15 and Wexos
49:22 DK Jungle by Skipper93653
54:55 Rosalina's Ice World by MysterE99 and Skipper93653
58:30 Bowser's Castle by Wexos and Atlas
1:02:17 Rainbow Road by Bladestorm227
0:00 Introduction
0:45 Wii Luigi Circuit
3:44 Wii Moo Moo Meadows
6:25 Wii Mushroom Gorge
9:55 Wii Toad's Factory
13:54 Wii Mario Circuit
16:45 Wii Coconut Mall
20:28 Wii DK Summit
23:50 Wii Wario's Gold Mine
27:38 Wii Daisy Circuit
30:25 Wii Koopa Cape
34:11 Wii Maple Treeway
38:30 Wii Grumble Volcano
41:55 PSAs
43:55 Wii Dry Dry Ruins
47:05 Wii Moonview Highway
50:50 Wii Bowser's Castle
55:00 Wii Rainbow Road
59:01 Outro
I thought about releasing this one on April Fools Day since I pretty well play the fool in this but I want to make sure I'm an episode ahead in progress (as in I finish recording Part 4 before releasing Part 3) and didn't complete the next part until late yesterday.
Spoiler alert: it's not...but that's a story for another episode.
I also briefly go over how I try to get two asymmetrical paths to be the same length.
I forgot I cut this from my original commentary, but I'm not really taking ideas or suggestions on this course as I'll be releasing these videos behind my actual schedule of making the track. In other words, the track is currently further along now than it is at the end of this video so any suggestions would already be out of date.
This also isn't a time lapse or anything mostly because I tend to rotate the camera a ton while working in blender which when sped up makes it pretty well unwatchable. This is more just showing a few of the steps and thought process along the way to get the track made.
As I mentioned in my Pikmin 1 VR Showcase, thanks to some file modding, AR Codes, and Dolphin VR, you can play Pikmin 2 in first person VR. It's definitely far from the recommended way to play the game and there's quite a few more issues with Pikmin 2 in VR in general than Pikmin 1, but it definitely makes for a unique experience.
This video covers Days 1 and 2 in the Valley of Repose as well as the first half of Day 3 in the Awakening Wood, ending with the Hole of Beasts. Technically I also have recorded the rest of Day 3 and Day 4 in the Perplexing Pool as well but I'm unsure if I'll bother with uploading those.
I've been playing a lot of Pikmin in VR recently so I thought I'd share a bit of it for people who aren't aware this is a thing you can do with a headset, Dolphin VR, and a Gamecube iso of the game.
This isn't a tutorial because the B-Roll for the tutorial would look terrible as it's hard to tell what's happening in the 2D Footage unless you're zoomed in, so I opted for a written guide instead and this video to sort of show off the end results.
Switch Download: gamebanana.com/mods/422871
This is a remake of Fossil Canyon from Diddy Kong Racing built to take advantage of Mario Kart 8 mechanics like tricks, antigrav, gliding, and underwater sections as well as a complete graphical overhaul. The look of the level was actually inspired more by Diddy Kong Racing DS which gave the track more of a desert theme.
There's still a number of issues with lighting and whatnot most notably in the tunnel section, but given my declining interest in this mod in particular and Mario Kart modding in general, I do not expect them to be fixed soon so don't ask. This was intended to be a quick project, but a number of issues and my interest in modding plummeting drug it out and I don't really want to work on this thing any more right now.
This may be the last tutorial for a while given I'd kind of like to work on other stuff and I'm quickly running out of subjects to talk about.
0:00 Intro
1:50 Method 1: Grabbing Edges and Moving Them
5:10 Method 2: Extrude Along Normals
8:42 Method 3: Subdivision Modifier
13:30 Method 3.5: Subdivision Modified Grass on top of pre-existing Cliff
In the video, I mention something about a different method for getting the track preview from in-game but I realized during editing I forgot to actually explain it. Basically, you'd make a backup of your current byaml, then edit the course intro camera to show whatever you want the preview to be an image of. Then just take a screenshot in-game during the course intro, and finally revert your byaml back to its original state to restore the intro camera.
Switch Toolbox: github.com/KillzXGaming/Switch-Toolbox
MSBT Editor Reloaded: github.com/IcySon55/3DLandMSBTeditor/releases/tag/v0.9.8
0:00 Intro
0:38 Copying UI files from game dump
1:30 Editing track names with track studio
4:19 Editing track names with Switch Toolbox/MSBT Editor
7:15 Creating the preview image (Skip this if you already did the Wii U version)
11:39 Replacing the course preview image in Switch Toolbox
12:26 Regarding distributing UI changes with mods
14:08 Testing In-Game
In the video, I mention something about a different method for getting the track preview from in-game but I realized during editing I forgot to actually explain it. Basically, I'd make a backup of your current byaml, then edit the course intro camera to show whatever you want the preview to be an image of. Then just take a screenshot in-game during the course intro, and finally revert your byaml back to its original state to restore the intro camera.
0:00 Introduction
0:30 Copying UI files to set up Track Studio
1:40 Setting up UI Editor in Track Studio
2:22 Exporting source image
3:14 Creating our preview image (skip this if you watched the Switch version first)
7:45 Wrapping up in the UI Editor
9:55 Testing in Cemu
10:44 PSA on distributing UI files
0:00 Introduction
3:00 Choosing what not to bake
7:09 Splitting the map into multiple bake maps
9:55 Supersampling Bake Maps
15:50 The Walrus Cove problem: When Smart UV Project Fails
22:05 Lightmap Pack
26:40 Subdivision Modifier
28:55 Reducing bake noise in Gimp
30:23 Image Depth in Gimp
35:20 Before edits
37:06 Final result and outtro
For the record, I'm dropping the numbers on these because these titles are already long enough and I may be jumping around to different points in the process in the future. If you need to view a previous part, they should be in order in the playlist.
If you watch this whole thing, first I'm sorry and second, congratulations on surviving that long.
0:00 Introduction
1:24 What is baking?
2:10 Why does the track look different than last time?
3:15 Blender Render View and Cycles Rendering
6:50 Adding Emissions to Gravity/Glide Panels
8:30 Making Water Semi-Transparent in Blender
9:30 Here Comes the Sun
12:30 Adding a second UV Map for all objects
16:30 Setting up shaders for baking in the Shader Editor
21:55 A vital PSA regarding baking and the Shader Editor
25:15 UV unwrapping the Bake Map and Smart UV Project
29:15 Distributing space in the Bake UV Map appropriately
32:55 Showing and hiding in render view
34:10 Setting up render settings
35:15 Enabling Ambient Occlusion in the scene (which may or may not be necessary)
36:25 Render settings continued
38:30 Shadow Baking
40:00 Fixing surfaces that are too small/narrow to bake
43:45 Saving the Shadow Bake
44:15 How to rebake only part of the Bake Map
46:35 Ambient Occlusion Bake
47:50 Light Map Setup
49:44 Fixing a Circular Dependency Error (Squadaloo forgets his own vital PSA)
51:40 Light Map Test Bake
53:15 Changing Emission Strength
54:20 Light Map Bake for Real this Time
55:35 Combining the Shadow and AO Maps in Gimp
1:03:10 Finishing the Light Map in Gimp
1:05:25 Just open Track Studio and skip ahead a minute, I forgot to cut this
1:06:30 Importing the maps into Track Studio
1:08:00 Reexporting track from Blender
1:09:00 Attributes Shader Mapper and applying maps
1:17:05 Testing in Cemu
1:18:58 Outtro
Switch Link: gamebanana.com/mods/414643
This is a completely original custom track themed around ancient ruins in the sea and everyone's favorite puffy-lipped fish, Cheep Cheeps. The goal of this track was to heavily utilize anti-gravity and water with falling off of ledges up out of water and dodging Cheep Cheeps that aren't at the same gravity as you.
I'm moderately pleased with how this turned out. However, I'm definitely frustrated with custom track making at the moment given I still have issues modding lighting and environment stuff among other things, but I'm too burnt out at the moment to keep going on this. I actually got about 50% of the way through making an entirely different track before making this one but got too overwhelmed with what it would take to finish it, so I'm probably taking a break from working on custom tracks.
I apologize if my desktop is distractingly dark, I think I had HDR enabled on my left monitor which for some reason affected the recording even though the right monitor is not HDR and shouldn't be affected.
0:00 Introduction
0:30 Start Grid "Modeling" and Texturing
6:40 Mirroring the Start Grid in Track Studio
9:25 Moving the Start Grid in Track Studio
10:20 Two Sided Faces for Wii U
12:45 Two Sided Faces for Switch (and how to avoid Track Studio crashes)
16:55 Testing our changes and outro
Sorry there hasn't been many updates, honestly I've just been burned out on working on this stuff and I've also just wanted to play video games in my free time instead of work on any of this stuff.
0:00 Introduction
1:00 Creating the gravity panel
15:10 Creating the road emissive material in Blender
19:45 Creating the gravity panel KCL
22:00 Replacing the model in track studio and texture import
25:00 Exporting materials from vanilla tracks
27:35 Gravity panel materials
31:35 KCL replacement
32:35 Gravity path adjustment (or lack thereof)
33:40 Testing changes
A couple notes I probably should have clarified. By default, Kart Fixed Search Camera with no roll, yaw, pitch, x, or y values set is placed behind the kart. By setting y=180, we rotate it around the driver 180 degrees to face head on at them.
Also, with regards to where I'm getting speed and distance from driver settings, it's basically just me spitballing based on past experience. There isn't really any scientific method to why I'm picking the values I am.
0:00 Introduction
0:58 Placing Areas
4:34 Online Spectator Fixed Search Camera
9:15 Kart Fixed Search Camera
11:35 Online Spectator Path Search Camera
12:45 Rail Paths
20:03 Kart Path Search Camera
23:40 Testing Replay Cameras
26:10 Fixing the Cameras
28:40 Updates on Future Parts and Outro
0:00 Introduction
1:19 Setting up the Intro Camera
6:20 Testing in Game
7:45 Redoing the third Intro Camera
9:15 Adjusting Camera Speed
Switch Toolbox: github.com/KillzXGaming/Switch-Toolbox
Map Textures: drive.google.com/file/d/1G4UaSuoLftrzmdHuM_a6D7ziVRx5THiv/view?usp=sharing
0:00 Introduction
0:25 Adding a Starting Line to the Visual Model
6:00 Making the Map Model
12:50 UV Unwrap Project From View and Finishing Model
14:50 Importing Map Model to Track Studio
17:00 Adjust Map Camera
23:00 Creating the Actual Minimap Image
30:40 Wii U Minimap Texture Creation
31:54 Switch Minimap Texture Creation Part 1
33:29 Add Drop Shadow to Minimap Image
34:55 Switch Minimap Texture Creation Part 2
36:30 Verifying Work in Track Studio...Or Not
38:20 Testing In-Game
39:45 Fixing the Finish Line
0:00 Introduction
1:07 Placing the main Enemy Path
9:14 Glider Enemy Paths and the Safety Fallback priority
13:51 Mushroom Shortcuts on Enemy Paths
16:47 Creating the Item Path
18:18 Changing what Alt Click does with Objects Mode
18:45 Item Path Curve Problem
20:45 Item Path Priority and HasHover Property
23:30 Placing Item Boxes
28:30 Testing with Shells
30:57 The Wii U Item Path Issue
33:45 Testing with Mushrooms
34:50 Observing AI for Enemy Path Irregularities
38:38 Adjusting Enemy Path Size and Outro
Wii U: gamebanana.com/mods/395724
Switch: gamebanana.com/mods/395725
Wii Bowser's Castle is a ground up remake of Bowser's Castle from Mario Kart Wii in the style of other Mario Kart 8 remakes. The model was originally created by SquireTurnbolt and ported into Mario Kart 8 (Deluxe) by Squadaloo.
There are some items that weren't able to be recreated perfectly in Mario Kart 8's engine (at least, not without custom objects that would interfere with other tracks like Twisted Mansion's wavy hall) as well as gameplay elements that don't exist in 8 (the half-pipes) and so work arounds or new gameplay elements were added instead. I hope you enjoy.
0:00 Introduction
0:37 Figure-8 Circuit (Quajeek99 & Sniki)
3:10 Yoshi Falls (Nintendo)
5:29 Cheep Cheep Beach (Jasper, ZPL, & GoldenRS)
9:27 Luigi's Mansion (Tock)
12:32 Desert Hills (Nintendo)
15:30 Delfino Square (Nintendo)
19:07 Waluigi Pinball (Sniki)
23:17 Shroom Ridge (Sniki)
27:12 DK Pass (ZPL)
30:50 Tick Tock Clock (ZPL)
34:04 Mario Circuit (ZPL)
37:08 Airship Fortress (Sniki)
40:30 Wario Stadium (ZPL)
44:00 Peach Gardens (Nintendo)
47:15 Bowser Castle (Sniki)
52:05 Rainbow Road (maczkopeti)
Download the pack here: wiki.tockdom.com/wiki/Squadaloo%27s_Mario_Kart_WiiMix (Although I technically haven't released the version I'm using here, these tracks haven't changed)
I don't know why I keep making these either, but we're back once again with the Mario Kart Double Dash tracks in VR.
0:00 Introduction
1:10 Luigi Circuit (Tock)
3:50 Peach Beach (Nintendo)
6:23 Baby Park (Bruh de la Boi)
8:53 Dry Dry Desert (ZPL)
12:28 Mushroom Bridge (Tock)
15:15 Mario Circuit (Nintendo)
18:11 Daisy Cruiser (FunkyDude15, Riidefi, & Cotni)
20:58 Waluigi Stadium (Nintendo)
24:47 Sherbet Land (Tock)
27:25 Yoshi Circuit (Tock)
30:32 Mushroom City (Riidefi & Tock)
33:45 DK Mountain (Nintendo)
37:30 Wario Colosseum (MKDasher)
41:36 Dino Dino Jungle (Tock)
45:12 Bowser's Castle (Tock)
49:49 Rainbow Road (Riidefi & Tock)
0:00 Introduction
0:35 Reviewing Mario Kart Stadium
2:07 Modeling Using Paths
16:00 Knife Tool
23:50 Sculpting Smooth Tool
29:55 Modeling Using "Extrude Face From Normals"
36:35 Joining and UV Mapping
38:36 Collision Introduction
42:44 Collision Modeling
48:30 Updating the Track in Track Studio
52:30 Testing in Cemu
0:00 Introduction
3:11 KCL Materials
8:20 Smooth Road (Again)
9:07 Resizing Water UVs
10:31 Fixing the Glide Ramp
18:15 Optimizing the Glide Ramp
23:50 The Series Going Forward
With the advent of Mario Kart 8's track studio, I plan on spending a vast majority of my modding time going forward on creating new tracks for that game rather than Mario Kart Wii. However, before I left Wii behind, I wanted to clean up a few things on Super Bell Hill since I felt I've gotten a bit better since then at making custom tracks.
Most notably, the course has been reduced in size and length in its mid-section. The original course layout was definitely larger than I intended and the new version has much better pacing. It's still not the most exciting track, but it's at least a bit faster paced than it was before. The road is also much smoother than before. Cat Goombas are the other big gameplay change. I really wanted to have them jump in the air and come down like in 3D World, but the only real object I could think of to replace was the small penguin which rotates to face path direction and has a duplicate for reflections so it ended up not working out. Still, I kept their leap animation so they'll dash across the road in one direction and walk in the other.
I also gave the map a full shadow map. It kind of makes the track a bit darker than I'd like and I may still play with it a bit, but I still think overall it looks better than the flat look of the original.
Switch: gamebanana.com/mods/382728 (thank you to Diam on the Track Studio Discord for quickly testing this on console)
This is a custom course based on Green Hill Zone from Sonic the Hedgehog (or more specifically its Sonic Generations incarnation). It was an absolute battle getting this thing done and there's still a couple minor issues I'm aware of, but I'm still absolutely thrilled with the end result. I'll likely be taking a break from any custom track making for Mario Kart for a while to recover from this one, but I hope you enjoy the end product.
Yes, I really should have double checked the ascent flag was going to work prior to using it but oh well.
Chapters
---
0:00 Introduction
0:45 Opening an existing track in Track Studio
1:10 Replacing the course_model.szs (Visual Model)
3:40 Opening Material Presets
5:38 Glider ramp and water material presets
7:23 Updating our course.kcl
9:55 Renaming our KCL objects in blender for automatic material import
14:00 Fixing lap and gravity paths
18:40 Making one lap path into multiple gravity paths
21:00 Adding underwater to the track
23:20 Advice on learning by opening other tracks
24:15 Setting up glider path
27:00 Adding coins
30:40 Testing in game and debugging glide paths
39:50 Wrapup
The next time we return to Blender, I'll fix our glide ramp as I realized I was going about it the wrong way with inset faces.
Chapters
---
0:00 Introduction
0:50 Face Normals
7:30 X-Ray View
10:00 Editing and splitting the road path
17:55 Snapping tool and finishing the road
23:00 Modifier order matters
25:30 Splitting Tab Views in Blender
28:30 Resizing our road UV, Brief discussion about what UV mapping is
31:10 Adding the water line plane
32:20 Getting more textures from Track Studio
34:25 Navigating the course folder in Mario Kart 8: which course is which
37:40 Adding textures to the water
39:50 Introduction to modeling from a base mesh
41:10 Modeling the glide ramp
46:10 UV mapping the glide ramp
1:06:05 Splitting objects by material for exporting visual model
1:07:25 Creating the KCL model
1:10:00 Optimizing and simplifying our KCL model
1:13:15 Splitting the glide ramp into multiple KCL objects
1:16:00 Exporting the KCL and wrap up
LINKS
Blender (Make sure to get 3.0 or under, NOT latest): blender.org
Track Studio: mapstudioproject.github.io/TrackStudioDocs/index.html
UV Squares - Free Github version: github.com/Radivarig/UvSquares
UV Squares - Paid version: blendermarket.com/products/uv-squares
Start Grid (link mentioned in video was removed): drive.google.com/file/d/1GeOmKnKia2-BjL-VcjMFLF6c0lSOjuoa/view?usp=sharing
Switch Mod page: gamebanana.com/mods/377488
This is a complete remake of Walrus Cove from Diddy Kong Racing with an attempt to recreate Nintendo's other track remakes in Mario Kart 8. There's some definite issues like the camera not being great during the loop and there *might* be some very slight frame drops on console at times (although it's hard to tell if it's the course or Mario Kart 8's infamous 59 FPS issue), but overall I'm very pleased with how it's turned out.
This time I included gameplay from 200cc. The track was designed with 150cc in mind, however, but it isn't half bad on 200cc.
Thank you to the Track Studio discord for helping me troubleshoot issues and to KillzXGaming for developing Track Studio. You can check out Track Studio here: mapstudioproject.github.io/TrackStudioDocs/index.html
Music by GaMetal (youtube.com/watch?v=6SHnSx0HAnc)
Note that the mod doesn't include the menu changes or music. I didn't want to interfere with other mods on the menu changes, but I did include the image I used in case you want to use it. I also didn't want to redistribute GaMetal's music without permission,
Here's a preview of what will be my first custom track for Mario Kart 8, a remake of Walrus Cove from Diddy Kong Racing! I picked Walrus Cove because I wanted to make a track that incorporated gliders, underwater, and anti-gravity for my first MK8 course, and I had the week off from work so I didn't want to take the time to plan out my own layout. I settled on Walrus Cove because I felt I could easily update the ending section to incorporate gliding and underwater sections.
This isn't yet complete as there's a number of mostly minor issues. Some are obvious like object placement, but here's a few notes on some of the biggest ones.
- The camera isn't great during the loop: honestly, this is the most glaring flaw of the track right now IMO, and unfortunately, it's probably the one I'm least likely to fix. I liked how the loop played when I was testing the layout and figured I'd use other means to adjust the camera, but it became clear too late that the only real solution the issue would be to reprofile the loop entirely. Maybe someday off in the future I'll reprofile it, but not for the first release.
- Water and pad animations don't play correctly. I used the presets in Track Studio, but they didn't seem to work properly or resized the water texture and I'm not yet familiar with its animation tools.
- The track is too dark: I intend for the track to be at night and it probably won't get too much brighter, but I really want the lights along the way to be brighter so I'll need to remap the shadow and light maps to fix that and some other issues.
- Item paths aren't great: as I demonstrate accidentally when my finger slipped in lap 3 and threw the shell I was dragging as a red shell was coming only for it to explode on its own, right now item paths don't work super great and red shells can easily slam into walls.
- It's untested on console: I've yet to test this out in a Wii U (yes, sadly no Deluxe port. I know, I prefer Deluxe too, but I don't want to risk doing anything to my Switch that might get it banned even with reassurances that some ripping tools won't cause issues)
- Need to fix the map/music/UI. I know how to fix a couple of these. The map actually should be updated already and I honestly don't know why it's still loading Mario Kart Stadium's map.
Anyways, I hope to have this done sometime this week, but it could easily slip into the week after. Overall, I'm not sure how many MK8 tracks I'll make due to how much more work it takes for a relatively simple course such as this to make it even close to the vanilla game's tracks, but I'm glad to be working in a game I love, and the new track studio makes it in many ways easier than even Mario Kart Wii tracks to get up and running with enemies, objects, and cameras.
I ran into a few hiccups while making the track, but overall this proof of concept went well. I was originally going to completely rebuild Super Bell Circuit as my first track (hence why I roughly recreated its layout here while making the clear pipe vertical for anti-grav testing. Clearly I still got the scaling wrong though as it's once again too drawn out) but I feel given how much more effort it will take to make a good looking HD track I will likely not go forward with it and instead sit down and really think about which first project I will pursue. I have little interest in doing ports of my Wii tracks as I feel any direct Wii ports will look ugly and out of place in Mario Kart 8 and I want something that looks reasonable well in HD.
As for my Mario Kart Wii plans, yeah, this will probably impact some of those plans going forward as I've always said I like 8 more. I doubt I'll drop it altogether as I can play it in VR while I can't play 8 (yet) but I don't expect to make too many more Wii tracks soon.
Time for more aimless rambling as I play through my custom track distribution for Mario Kart Wii in Dolphin VR. This time we're playing the Mario Kart Super Circuit tracks.
Some after-the-fact notes:
- Sorry if I sound a bit echo-y at times in this video. Normally I record with a separate audio track for me and the game, but I guess at some point I screwed up and the game audio track ended up combining both my voice and game audio. I still had a separate audio file for my voice so I ended up just really quieting the game/voice mix to bring the voice out, but it's technically playing twice on top of each other.
0:00 Intro
1:28 Peach Circuit
4:11 Shy Guy Beach
6:55 Riverside Park
9:55 Bowser Castle 1
12:40 Mario Circuit
15:22 Boo Lake
18:03 Cheese Land
21:26 Bowser Castle 2
25:10 Luigi Circuit
28:55 Sky Garden
32:26 Cheep-Cheep Island
36:00 Sunset Wilds
39:52 Snow Land
43:00 Ribbon Road
46:54 Yoshi Desert
50:35 Bowser Castle 3
55:09 Lakeside Park
58:35 Broken Pier
1:02:30 Bowser Castle 4
1:06:55 Rainbow Road
Ancient Lake is a ground up remake of the course of the same name from Diddy Kong Racing. Originally I was thinking about adapting Mario Kart Super Circuit tracks like I did for Sky Garden but the Mario Kart 8 DLC took the wind out of my sails on that project so I decided to instead look at going through something like Diddy Kong Racing track by track and remake them from the ground up like I did for Frosty Village.
Diddy Kong Racing isn't admittedly my favorite kart racer or even my favorite non-Mario Kart kart racer, but I had a fun time readapting Frosty Village and I thought it'd be a fun side project. I have no idea if I'll even come close to finishing every track in the game (probably not by a long shot) but it'll be something to pick away at over time I figure.
The track features a mix of textures from Mario Kart Wii, Mario Kart 7, and AI Upscaled textures from Diddy Kong Racing on the N64 and DS. The layout is based on the N64 original but with some of the visual changes from the DS port such as gray stone monoliths and grass topped cliffs.
There are some minor gameplay changes to accommodate Mario Kart Wii. I had no idea how to mod any object into the dinosaur that crosses the
path during the lake and retain the behavior of the original, so it's been reduced to a background element. The first booster was moved to avoid
using it to cut grass and a few trickable spots were added such as the footprints at the end of the track.
Overall not the most exciting custom track but it was a fun modeling practice working on remodeling the dinosaur from the original.
Yes, I realize now it should be "Dream Land Drive" but eh, too late now.
After starting and abandoning a couple projects, I decided to make a pretty simple Kirby themed course to honor the release of Kirby and the Forgotten Land. This ended up getting delayed about a week because...well, I was busy playing Kirby and the Forgotten Land. Of course, it'd have made more sense to actually make a Forgotten Land track, but I'd want official materials to go off of and as far as I'm aware the models and textures haven't been ripped yet.
I finally figured out how to properly export rigged figures from blender to Brawlcrate so I was able to add custom enemies in the form of Waddle Dees. In the future I may circle back and add some more animated crowds and things to spice up the level further. I also noticed a couple minor errors where Brawlcrate moved some vertices around in importing so there's a couple visual gaps in the road along the edge at places which I didn't notice until after I uploaded it. I hope to fix this in the next version.
Time for more aimless rambling as I play through my custom track distribution for Mario Kart Wii in Dolphin VR. This time we're playing the Mario Kart 64 tracks.
Some after-the-fact notes:
- Koopa Troopa Beach was made by Rex. I wasn't able to shout it out because I relied on the author names popping up during the course previews and that course preview ends before it begins really.
- The respawn bug I talk about during Yoshi's Valley was actually fixed while this video was rendering so ignore me complaining about it. It's still not been updated in my pack, but the version of the track itself on the custom track wiki shouldn't have that issue any more.
0:00 Intro
0:40 Luigi Raceway
3:49 Moo Moo Farm
6:25 Koopa Troopa Beach
9:44 Kalimari Desert
13:54 Toad's Turnpike
16:43 Frappe Snowland
20:26 Choco Mountain
24:00 Mario Raceway
27:33 Wario Stadium
30:53 Sherbet Land
34:27 Royal Raceway
37:53 Bowser's Castle
42:43 DK's Jungle Parkway
46:25 Yoshi Valley
49:50 Banshee Boardwalk
53:53 Rainbow Road


