Uploaded January 2020 | Updated September 2026, 1 hour ago

---

Solve Windows Can't be installed on drive 0 partition 1 error while install Windows 10. You can fix this error without any file loss if you do correctly otherwise it could happen. How to Fix Windows Can't be installed on drive 0 partition 2 error while install Windows 10. Can't select windows installation drive : error : Windows Can't be installed on drive partition.
Still learning English, please try to understand.
What is Windows Can't Be Installed on Drive and Partition?
This error can occur when selecting an install drive after the first stage of Windows 10 installation.
Process.
If the partition you selected here is a local disk of a drive, the solution to this need to be done very careful. Other than that, if you are using a hard drive or SSD completely for Windows 10, then the solution can be done very fast, and simple.
Let me make it more clear.
Here you can see all the partition of the drive connected to the computer. If Operating system is installed on a Partition, commonly known as C drive of a Hard disk. Then the fix is only need to apply on that particular partition. And its essential to install windows 10 without damaging other partitions. For that, you need to do this procedure more carefully.

Let start procedure. use your computer keyboard and enter the Command prompt option. For that , hold the Shift key and press F10 key.
Type : Diskpart command and hit the enter key.
Type : List disk
It will shows the connected disks.
Type: Select Disk 0.
Disk 0 is now selected disk.
If you want to use the entire hard drive space for the Windows 10 operating system. From this point you can type the "clean" command and press the enter key. Then close the cmd (command prompt ) and proceed to install windows 10.
( following commands will helps you to save other partitions)
Type : List volume
it will show all system partitions.
Type: select volume ?.
Once the volume partition is selected .
Type : Clean
Type: Create Part pri
Type: Active,.
Type: format fs=NTFS label=DEE Z quick p
it takes some times to get formatted.
Type :Assign Letter=C.
Type: exit
and close the CMD.
------------------------------------------------
Now try to refresh the drive section it will allows you to select and install without any problem.
Best Free Data recovery tool : bit.ly/362xY03
There is two way to recover your important data if loss.
1, you need to have one more working desktop PC. If then, disconnect the hard drive from the loss computer and connect it to the working computer, and install a recovery tool like getdataback , Power data recovery, Recuva, Disk Drill, Pandora Recovery etc., on the computer. Then, Run the recovery tool and locate the "drive" and start recover.
2, Use another "hard drive" or any USB storage that support up to 32 GB file. And, choose that drive to install the windows operating system. After the installation log in to windows desktop. Then, install the same recovery tool on the computer, and try to recover ( no need another PC ).
you can contact me, If you can't choose the drive for windows OS installation.

How to Fix Windows Can't be installed on drive 0 partition 1 error while install Windows 10. Solve Windows Can't be installed on drive 0 partition 2 error while install Windows 10.


Deepu Prabhakar
Trivandrum, Kerala, India.
Contact : +916238290039.