3D Printing Your Own Multicolor Filament 3D Maker Noob 2026-09-26 | 3D Printing Your Own Multicolor Filament
I 3D Printed A Portal 😱 #Shorts 3D Maker Noob 2023-03-04 | Need a Rick and Morty portal? Maybe a stranger things upside down portal? This is the coolest model ever! It's part of a kickstarter campaign currently underway by Black Scrolls Games: geni.us/CallingPortals - The filament used was Prusament Marble Grey PLA geni.us/PrusamentMarble
The Happiest 3D Printer In The World #Shorts 3D Maker Noob 2023-02-27 | The very long journey into building my customer Voron 2.4 is finally complete (For now). The fact that this 3d printer puts a smile on my face and anyone else that sees it, makes it worth of being dubbed the happiest 3d printer in the world :) You can get your Voron kit here: geni.us/MHLDOVoronYou can get the filament here: geni.us/Fillamentum#Voron24 #3DPrinter #DIY
Its ALIVE! Voron 2.4 Kit Assembly Part 6 #Shorts 3D Maker Noob 2023-02-17 | Time to fire up this beast! one last part to go, and that will be extremely special and unique, I promise :) You can get your Voron kit here: geni.us/MHLDOVoronYou can get the filament here: geni.us/Fillamentum#Voron24 #3DPrinter #DIY
Voron 2.4 Kit Assembly “Skittles” - Part 5 #Shorts 3D Maker Noob 2023-02-16 | Cable management on the Voron 2.4 means that you do not see a cable in sight, just pure clean awesomeness. Cannot wait to fire this baby up! Next up will be the final body assembly with skirts, bells and whistles :) You can get your Voron kit here: geni.us/MHLDOVoronYou can get the filament here: geni.us/Fillamentum#Voron24 #3DPrinter #DIY
Voron 2.4 Kit Assembly “Skittles” - Part 4 #Shorts 3D Maker Noob 2023-02-15 | The wiring on the Voron 2.4 is quite intimidating, but the prepped looms form the LDO Motors kit make it an absolute joy to put together. Took a while, so expect the res of the wiring in the next installation of the videos :) You can get your Voron kit here: geni.us/MHLDOVoronYou can get the filament here: geni.us/Fillamentum#Voron24 #3DPrinter #DIY
Mechanical Heart Container #Shorts 3D Maker Noob 2023-02-13 | This is another awesome Print-in-place model by @Clockspring3D - The mechanical Heart Container prints in once piece and has a locking mechanism. This was printed on the @Prusa3D MK3S+ MMU and took around 16 hours to printSupport Clockspring here: geni.us/CSPatreonGet your MK3 Here: geni.us/PrusaMk3Get the MMU2 Here: geni.us/PrusaMMU#3dprinting #3dprinter #multimaterial #prusaslicer #valentinesday Should you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcasha
Voron 2.4 3D Printer Assembly - Part 3 #shorts 3D Maker Noob 2023-02-12 | Belt and Stealthburner time! I have to admit, I love the way the Stealthburner cover came out :DYou can get your Voron kit here: geni.us/MHLDOVoronYou can get the filament here: geni.us/Fillamentum#Voron
Skittles Voron 2.4 Assembly - Part 2 #Shorts 3D Maker Noob 2023-02-08 | Time to continue with part 2 of the LDO Motors Voron 2.4 kit assembly which I dubbed as "Skittles" due to its colourful nature :) next up will be the Stealthburner :DYou can get your Voron kit here: geni.us/MHLDOVoronYou can get the filament here: geni.us/Fillamentum
Skittles Voron 2.4 Assembly - Part 1 #Shorts 3D Maker Noob 2023-02-05 | Time to get this party started. Part 1 of the LDO Motors Voron 2.4 kit assembly which I dubbed as "Skittles" due to its colourful nature :) while the shorts is 50 seconds, this whole part took roughly 4 hours to put together.You can get your Voron kit here: geni.us/MHLDOVoronYou can get the filament here: geni.us/Fillamentum
World’s Smallest FDM 3D Printer? #Shorts 3D Maker Noob 2023-02-04 | A blast from the past, The Velleman Vertex Nano. A machine I reviewed 6 years ago and decided to keep, mainly because it was cute and doesn't take up space
Can You 3D Print A 3D Printer? 🤯 #shorts 3D Maker Noob 2023-01-31 | Many have asked me to 3d print a 3d printer, so here it is. All the while, most of the things I 3d printed were done on machines that have a lot of 3d printed parts :)Prusa MK3 Model by MajorOCD: geni.us/PrusaMK3Remix3D Printer (Prusa MK3): geni.us/PrusaMk3LDOMotors Voron kits: geni.us/MHLDOVoron
Saving Money With 3D Printing #Shorts 3D Maker Noob 2023-01-26 | This is why I love 3d printing. Sometimes you want something that you don't need but could do with. so instead of buying a remote control caddy, i decided to design one and print it :)Cocoon Remote Stand: geni.us/CocoonRemote Simple Caddy: geni.us/SimpleCaddyPrusament Galaxy Green: geni.us/PrusamentGalaxyGrShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
3D Printed Fabric Chainmail #Shorts 3D Maker Noob 2023-01-20 | 3D Printed fabric is just awesome. This tetrahedron chainmail fabric design by Luke’s3D is just insane. I printed it in some Prusament Silver for the bottom half and then switched to Yousu tri-colored filament for the pyramids on the top. The result is just EPIC!Model available here: geni.us/TetraFabricPrusament filament: geni.us/PrusamentGalaxyGrYousun Filament: geni.us/YousutricolorPrusa MK3: geni.us/PrusaMk3Timelapse Nurdlapse: geni.us/NurdlapseShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Green Glitter Garden Spiral Planter #shorts 3D Maker Noob 2023-01-19 | Time to get that green thumb out and make use of this gorgeous Galaxy Green PLA by prusament, so I put my Prusa mk3s and my bambulab P1P to good use. The Modern Spiral Planter by SchulteGeileTechnik is truly gorgeous and I went ahead and did a holder for 3 of these plantersSpiral Planter: geni.us/SpiralPlanterTripot Holder: geni.us/TriPotHolderPrusament Galaxy Green: geni.us/PrusamentGalaxyGrPatrick Prints PLA: geni.us/PatrickPrintsPrusa MK3S: geni.us/PrusaMk3BambuLab P1P: bambulab.com/enShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Perfect Business Card Holder For 3D Printing Businesses #Short 3D Maker Noob 2023-01-15 | If you happen to have a 3D Printing business, this has got to be the business card holder to use. Shoutout to Filament Frenzy for pointing me to it. Designed by Logan Browne, it is available free to download on Printables. Printed in Eryone rainbow filament on the Bambulab P1PModel is available here: geni.us/BusinessCardHolderFilament used: eryone3d.comPrinter used: bambulab.com/enShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Making vs Buying #Shorts 3D Maker Noob 2023-01-13 | Why on earth would I go buy anything that I could make myself? Makers are always gonna make ;)Model is available on Printables: geni.us/CatdadLampShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Marble Maze Madness #Shorts 3D Maker Noob 2023-01-09 | Who doesn't love a marble maze? seriously! This brings back so many memories for me and it was such a fun print, and something that actually kept me entertained for a bit lolThe marble maze was designed by ericman314 and is available to download for free on printables: geni.us/MarbleMazeFilament by Patrick Prints: geni.us/PatrickPrintsPrinted on the Prusa MK3S+: geni.us/PrusaMk3Should you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Klipper And M600 Color Change Macro 3D Maker Noob 2023-01-08 | It's been a while since I did a tutorial, and since I am learning my way through Klipper, I figured I'd start that back to basics noob process of sharing everything I learn and hopefully help someone else in the process :)Github for Klipper Macros is available here: github.com/Klipper3d/klipper/blob/master/config/sample-macros.cfgBIQU Hurakan here: https://biqu.equipment/products/biqu-hurakan-diy-3d-printer?variant=40089640960098Prusa MK3S+ here: geni.us/PrusaMk3LDO Motors Voron Kit: geni.us/MHLDOVoronShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
3D Printing For The Last Drop! #Shorts 3D Maker Noob 2023-01-07 | Finally it's time to stop fighting with my toothpaste tube to get every last bit of toothpaste out. This 3D Printed ratchet tube holder makes easy work of it. also, satisfying clicks are included :)Model is available here: geni.us/RatchetTP3D Printer is available here: geni.us/PrusaMk3Should you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Best Lego Tool Ever! #Shorts 3D Maker Noob 2023-01-06 | This Lego tool would have saved me countless hours in counting the pins and holes on lego bricks :) thankfully 3d printing comes in to the rescue with a very quick and easy version thank to NIRACreationzModel available here: geni.us/LegoRulerShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Magnetic Planar Dish #Shorts 3D Maker Noob 2023-01-05 | This planar dish by Clockspring3D features a perfect surface finish due to it's print-in-place design. The magnetic version is even more epic as it is perfect to hold onto any loose screws you may have lying aroundModel is available here: geni.us/PlanarDishShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Must Have Workshop Tool #Shorts 3D Maker Noob 2023-01-03 | This very handy 3d printed tools allows me to very quickly sort out all the loose screws I keep gathering. by far my most useful 3d printed tools.Model available here: geni.us/ScrewMeasureShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
It’s Alive! Snapmaker Artisan Assembly #Shorts 3D Maker Noob 2023-01-01 | The snapmaker Artisan is finally fully assembled and it looks amazing!Find out more here: geni.us/SnapmakerArtisanShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
3D Printed Fries! #Shorts 3D Maker Noob 2022-12-31 | So many have asked for them, and thankfully Clockspring delivered. An epic Fries container to go along with the cheeseburger and shakeModel available here: geni.us/CSFriesShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
3D Printed Rattan #Shorts 3D Maker Noob 2022-12-30 | Time for some gorgeous looking 3D Printed rattan inspired coasters. so easy to print, and they look awesome!Model available here: geni.us/RattanCoastersShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Stuff Your Nautilus #Shorts 3D Maker Noob 2022-12-29 | A fun print-in-place container inspired by the epic Nautilus designed by Clockspring3DModel available here: geni.us/NautilusBoxShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
8-Bit 3D Printed Graphics #Shorts 3D Maker Noob 2022-12-27 | Time for some retro graphic-style vases Thanks to this epic Pixel vase designed by Tony MaHoney which is available on Printables. Get ready to prints LOTS of pixels heheModel available here: geni.us/PixelVaseFilaments available here: geni.us/PatrickPrintsShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Merry Noobmas! #Shorts 3D Maker Noob 2022-12-25 | Just wanted to wish all of you a Merry Christmas and a Merry NoobmasModern Christmas tree model by IRBlinx available here: geni.us/EeerblinksFilament Used: geni.us/MHQuantumShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
THE Dice-O-Matic 3D Printed Dice Roller #Shorts 3D Maker Noob 2022-12-24 | Take your dice shaking game to the next level with Clockspring's Dice-O-Matic! An awesome print-in-place model that puts any dice tower to shame.Model Available here: geni.us/DiceRollerMatterhackers Quantum Blue/Raspberry: geni.us/PGQuantumShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Hypnotic Fidget 3D Print #Shorts 3D Maker Noob 2022-12-23 | This is one of the most hypnotic and fascinating fidgets I have ever come across. A simple yet very effective fidget toy to completely mesmerize you.MAGNETIC HEXAGON FIDGET TOY by FBMinis: geni.us/FidgetHex YOUSU Tri-Coloured Filament: geni.us/YousutricolorShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
3D Printing Wood Infused Filament #Shorts 3D Maker Noob 2022-12-22 | I just recieved the latest colours from Fillamentum's Timberfill range, and they look AMAZING! I printed these pots by Catdad Workshop in 0.5mm layers with an E3D Revo 0.8mm nozzle on my Prusa MK3S+ in vase mode and they turned out gorgeous! Catdad Worksop's pots are available here: geni.us/TerracottaPotsFilament available here: geni.us/FillamentumRevo Nozzles are available here: geni.us/E3DOnlinePrinter available here: geni.us/PrusaMk3Should you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Giant 3D Printed Burger #shorts 3D Maker Noob 2022-12-21 | You asked me to go bigger, so I did. The burger bun model by Clockspring was printed at 370% on the New Elegoo Neptune 3 Plus in Patrick Prints PLA. Then i jumped onto fusion 360 and modified the Gridfinity system by Zack Freedman to accomodate all the stationery that my daughter had lying around in one of her drawers. Bun model by Clockspring available through -Myminifactory: geni.us/CSBurgerClocksprin3D Patreon: geni.us/CSPatreonPatrick Prints PLA: geni.us/PatrickPrintsShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Headphones Desk Clamp Hook #Shorts 3D Maker Noob 2022-12-18 | This is another epic model from Clockspring3D. It's a print-in-place Clamp hook with an integrated tightening screw. Comes in many orientations and sizes depending on what the intended use is, in my case, it was headphones and the ridiculously long cable that comes with it.Check out Clockspring's Patreon: geni.us/CSPatreonPrinted on the Bambulab X1C: bambulab.com/enPrinted in Patrick Prints PLA: geni.us/PatrickPrintsShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Useful Doughnuts? #Shorts 3D Maker Noob 2022-12-17 | This is a 3d printed doughnut container designed by Clockspring. Prints without supports and just needs magnets and some glue. Model available through:Clockspring's Patreon: geni.us/CSPatreonMyminifactory: geni.us/DoughnutMMFFilaments by Patrick Prints: geni.us/PatrickPrintsShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Switch Games Organizer #Shorts 3D Maker Noob 2022-12-16 | Following a ton of requests, here's an update on the SD Card Rolodex model by Tetralite. This time with the much requested Switch Games holder and MicroSD card holder, thanks to remixes designed by Davidconger and michaeldallenOriginal Rolodex by Tetralite: geni.us/SDRolodexPrintablesSwitch Games Holder By Davidconger: geni.us/SwitchHolderMicroSD Card Holder By MichaelDallen: geni.us/MSDHolderShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Multicolor 3D Printing A Yeti #Shorts 3D Maker Noob 2022-12-15 | I did it for the Lolz ok? lol (see, I lolled)Model available through FlexiFactory Patreon: patreon.com/FlexiFactory/postsShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Snapmaker Artisan 3-in-1 Assembly Part 1 #Shorts 3D Maker Noob 2022-12-13 | Part 1 of the Snapmaker Artisan 3-in-1 3D Printer. This thing is huge. Gonna need a bigger table. Part 2 will see the massive enclosure, and then the final assembly, test print, cnc and laser.More info can be found here: geni.us/SnapmakerArtisanShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Packaging Perfection Snapmaker Artisan #shorts 3D Maker Noob 2022-12-12 | Unboxing the @snapmakerinc Artisan is an experience all in itself. Just pure packaging perfection. Can’t wait to put it together 😍More info here: geni.us/SnapmakerArtisanShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Axolotl Cuteness Overload #Shorts 3D Maker Noob 2022-12-11 | This has got to be one of the cutest articulated print-in-place models i have ever 3d printed. This is an Axolotl, and my daughter hasn't stopped going on about it, so i decided to print one myselfModel by Matt Meyers: geni.us/AxolotlMMFFilament used: geni.us/PGQuantumShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
From Strength To Strength - Visting Trilab HQ 3D Maker Noob 2022-12-11 | Over the summer I visited Prague and decided to head over to the new Trilab HQ in Hradec. Trilab has recently been partly acquired by Prusa Research. This is a short story about their growth and their plans for the future.You can find out more about Trilab here:Trilab: trilab3d.comVia Prusa3D website (Affiliate): geni.us/TrilabPrusa3DShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Best SD Card Holder Rolodex EVER! #Shorts 3D Maker Noob 2022-12-10 | This has got to be the best SD card holder and organizer I have ever come across. Having a ton of 3D Printers and Cameras also means a ton of SD cards, and this is just perfect.Model designed by Tetralite available from Printables: geni.us/SDRolodexPrintablesFilaments used:Prusament PETg Chalky Blue: geni.us/PrusamentPatrick Prints Surf Green and Wine PLA: geni.us/PatrickPrintsShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Steam Explosions Up Close #Shorts 3D Maker Noob 2022-12-09 | This is part of a short series of videos related to Drywise, and how a machine can solve some industrial headaches with an in-line filament drying solution. Hygroscopic filaments such as nylon, among many other, absorb moisture from the air very quickly, making it unusable after a few hours of printing. This will result in all the popping sounds you hear along with a milky white print (for transparent filament) and reduced mechanical properties and strengthFind out more about drywise here: drywise.coShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Game Changer Organic Supports #Shorts 3D Maker Noob 2022-12-08 | Prusa will release the new organic supports feature in an upcoming PrusaSlicer version. The difference between tree supports and organic supports is that rather than a linear pattern with branches, the organic supports take a more organic shape around the model so they reduce time and filament. Filament: geni.us/Yousutricolor - Use code BREAKSNMAKES15 for 15% OFF3D Printer used: geni.us/PrusaMk3You can download the pre-sliced gcodes for MK3 here:Alien Xenomorph by Printed Obsession: geni.us/XenomorphOrganicDragon Slayer by Valdo Turek : geni.us/DragonSlayerOrganicFleur Delacour's Wand by Printer42: geni.us/FleurWandOrganic3D Benchy Kraken : geni.us/3DBenchyOrganicShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Sensory Stimulation ASMR 3D Print #Shorts 3D Maker Noob 2022-12-05 | The ASMR on this shorts was just too good, so I decided not to include any music and just let the sensory overload do it's thing. Jellyfish Model: geni.us/JellyFishFilament: geni.us/Yousutricolor - Use code BREAKSNMAKES15 for 15% OFF3D Printer used: geni.us/PrusaMk3Should you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
$100 3D Printed DSLR Micro Jib #Shorts 3D Maker Noob 2022-12-04 | Check out the full video here: youtu.be/1jGpy_TEI2AYou can find the model on MyMiniFactory: geni.us/MicroJibUSE CODE "3DMN20" to get 20% off the Micro Jib ModelFilaments by Patrick Prints: geni.us/PatrickPrintsShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
One Hell Of A Functional 3D Print! 3D Maker Noob 2022-12-04 | You can find the model on MyMiniFactory: geni.us/MicroJibUSE CODE "3DMN20" to get 20% off the Micro Jib ModelFilaments by Patrick Prints: geni.us/PatrickPrintsShould you wish to support me, you can do so via:Patreon: patreon.com/3Dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
ASMR 3D Printed Pixels #Shorts 3D Maker Noob 2022-12-03 | This is part of a 3d printed model I will be showing soon, but I was so mesmerized by the sound while editing that I figured I'd share just a short clip of it for those keen on some ASMR goodnessThis is the model I will be showcasing: geni.us/PixelVaseShould you wish to support me, you can do so via:Patreon: patreon.com/3dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
Cheap And Quick 3D Prints #Shorts 3D Maker Noob 2022-12-02 | It's time for some proper functional 3d printing. Instead of going online or out to the store and spend €4 euro on a hook, I simply spent a few minutes designing a door hanging hook, used some recycled PETg and 47c later, I have what I needed. This is why 3D printing is awesome!Model available here: geni.us/SimpleDoorHookPrinted on the Prusa MK3s : geni.us/PrusaMk3Filament Used: geni.us/RecycledPETgShould you wish to support me, you can do so via:Patreon: patreon.com/3dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
3D Printed Christmas Tree #Shorts 3D Maker Noob 2022-11-29 | It's that time of the year again. With christmas less than a month away, it's time to start printing some christmas stuff, starting off with this awesome model by Spencer3DPrints which is available from Printables. Printed on the Prusa MK3S+ using Patrick prints filaments.Model available here: geni.us/LEDTreeFilament available here: geni.us/PatrickPrintsShould you wish to support me, you can do so via:Patreon: patreon.com/3dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
250% Keyboard Warrior Defences #Shorts 3D Maker Noob 2022-11-28 | To all creators out there, do what you love. Your channel, your rules. Keyboard warriors will always be around, so thank them for increasing your video interactions ;) This is "Working cannon" by Makkuro. A fun print-in-place model. I also went ahead and printed a 250% scale version of course :)Model: geni.us/workingcannonShould you wish to support me, you can do so via:Patreon: patreon.com/3dmakernoobpaypal: http://www.paypal.me/jcashaWant to send me something? go ahead (Normal mail as courier packages get returned):Attn: Joseph Casha P.O. Box 12Constitution Street,Mosta, MST 9059MaltaEurope-----------✌✌Affiliate Links ✌✌Matterhackers: http://geni.us/MH3DMNAmazon International: http://geni.us/3DMNoobGearbest: http://geni.us/3DMNGBBanggood: http://geni.us/3DMNBGAliexpress: http://geni.us/3DMNAERecording Equipment:Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7(B-Roll) Canon EOS760D: http://geni.us/CanonEOSCanon EF 10-18mm: http://geni.us/CanonEF1018Canon Lens: http://geni.us/Canon2470ElGato Stream Deck: http://geni.us/StreamdeckElgato HD60S Capture Card: http://geni.us/elgatohd60Timelapse - GoPro Hero 5: http://geni.us/GoProH5Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkitLight Boxes: http://geni.us/StudioLightsHigh Speed SD Card: http://geni.us/SandiskSD
