DIY camping showerThe Furrminator (Jeff Furr)2026-09-22 | DIY camping showerSmokemont Campground in the Great Smoky Mountains National ParkThe Furrminator2024-01-12 | In 1976 my parents purchased a 17' travel trailer after being invited to go camping with several families from our church. The first campground we visited was Smokemont Campground in the Great Smoky Mountains National Park and from that point we were hooked on camping. After growing up camping at Smokemont for all those years, it is still my favorite place to camp.
Smokemont campground is located five miles north of Cherokee on US 441, just inside the Great Smoky Mountains National Park. Smokemont Campground is situated along side the Oconaluftee River. Smokemont offers group camping and 138 campsites for primitive camping with no water, power, or sewer hookups.
Smokemont Riding Stable is adjacent to the campground. They offer trail rides for ages five years and up and they welcome groups. They have a one hour, two and a half hour, and a four hour ride. Also available for any age are wagon rides. Call 828-497-2373 for rates and availability.
Things you should know:
All food, drinks, and equipment used to prepare and store food must be kept sealed in a vehicle or in a camping unit constructed of solid, non-pliable material or as otherwise directed at all times when not in use.
Only heat treated firewood which is in its original packaging and bears a certification from the USDA or a state agency may be brought into the park.
Campfires are permitted only in fire grates.
Pets are allowed in the campground but must be confined or on a six foot leash. Pets are not allowed on trails and should not be left unattended.
RV sewage must be drained at a dump station. Showers and utility hook ups are not available in the park.
Quiet hours are in effect from 10 PM to 6 AM and generator use is prohibited from 8 PM to 8 AM.
Generator use and battery charging by engine idling is prohibited in generator free areas. Generator use is prohibited in loops A, B, and C from May 15 through October 31.
Tents must be pitched on the tent pads where provided.
Bicycles are allowed and bicycle riders must comply with all traffic regulations including helmet laws and are restricted to public roads, parking areas and designated routes. The use of in-line skates, skateboards or scooters is prohibited.
------------------- Email thefurrminator@gmail.com -------------------- Facebook facebook.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator -------------------- Pinterest pinterest.com/thefurrminator --------------------Nilight RV Interior Light Installed in a 360 Hunting BlindThe Furrminator2023-11-13 | I received a two pack of the RV Interior Lights from Nilight for a review. I was happy to install and review these lights because I have used this brand previously on my hunting buggy project and I know and have experienced this to be a quality brand name. In this review, the install could not have gone smoother. I already had the power source that was easily accessible. The hardest thing about the install was deciding which way to run the wire to the light. After running the wire to inside the box stand, it was as simple as attaching the positive and negative with the included wire nuts and attaching the light to the ceiling with the provided screws. Side note, I normally would not want a light that bright inside my box stand, but as a grandpa with four, very young grandkids, I thought this would be a great addition to the box stand as I introduce them to hunting. This light is powered by a small 12 volt Mighty Max battery and it is extremely bright. I plan to install the second light from the two pack that I received in the storage compartment of our 2022 Forest River travel trailer. That should also be a very simple install with the exception of locating the power source. Nilight also sent me a 50 Amp RV Surge Protector which I am using now for a later review. You can find these items and more at the links below.
Nilight 50Amp RV Surge Protector https://a.co/d/8OoNUrNDIY Septic Tank Riser InstallThe Furrminator2023-10-20 | After shoveling the dirt away to uncover our septic tank lids in order to have the tank pumped out, I decided I did not want to do that again. After a lot of research, I decided to go with the Polylok Tank Riser kit. I purchased mine from www.septicsolutions.com but I am including the Amazon link to a similar Polylok tank riser kit below Polylok 24" Septic Tank Riser Kit (14" Tall) https://a.co/d/3hrkfLR The one main suggestion I have would be to locate the designated area in the base for the anchor and drill through the base into the concrete and install the anchor through the base. This method worked great for me and was much easier than installing the anchors and then trying to fit each hole in the base over an anchor.
Other tools used for this project
Ryobi ONE+ 18V Cordless 1/4 in. Impact Driver Kit with 1.5 Ah Battery and Charger (P235AK1) https://a.co/d/2bLrID2
RYOBI ONE+ 18V Cordless 1/2 in. Drill/Driver (Tool Only) PCL206B Black Green https://a.co/d/81O0r0M
Stanley 33-281 Leverlock Fractional Tape Rule with Magnetic Tip, 1-Inch X 25-Feet https://a.co/d/giclJr8
CRAFTSMAN Socket Set, 1/4-Inch & 3/8-Inch Drive, Standard and Metric, 105 Pieces (CMMT12023) https://a.co/d/1dmNaI9
LEXIVON Impact Grade Socket Adapter Set, 3" Extension Bit With Holder | 3-Piece 1/4", 3/8", and 1/2" Drive, Adapt Your Power Drill To High Torque Impact Wrench (LX-101) https://a.co/d/f1klGkASetting up our RV at home after vacationThe Furrminator2023-07-04 | Setting up our RV at home or on vacation is pretty much the same routine. I have a list memorized and I follow it the same way every time. I just thought I would make a short video that may be of help to someone or give someone some ideas.
Amazon link ANDERSEN HITCHES Trailer Jack Blocks https://a.co/d/8CVTq9iMaking good use of my misting fan when there’s no wind on the beach #mistingfan #northmyrtlebeachThe Furrminator2023-06-25 | ...When you say you don’t have a little OCD but the evidence says otherwise.The Furrminator2023-06-25 | ...RV Sewer Cap Removal ToolThe Furrminator2023-06-07 | After dealing with really tight sewer caps on our new travel trailer, I decided to make a tool to make removing the caps very easy. I made this tool out of a piece of scrap oak flooring.DIY RV Storage DrawerThe Furrminator2023-05-29 | After building my first RV storage drawer in our first RV, I knew that I would want one of these in our next RV as well. These drawers make it so simple to be able to reach everything in a compartment that is four feet deep and sometimes a pass through compartment. If you have a travel trailer with minimal storage, you are certainly familiar with having items in the storage compartment that you can’t reach or that you haven’t seen in a few years due to it being lost behind something in the deep, dark corners of the compartment. After purchasing our new travel trailer, I planned to build this drawer and fortunately, Vadania reached out to me offering a set of heavy duty drawer slides. You don’t have to add drawer slides to have a working drawer in your storage area. Drawer slides do make it very nice, easily operational and much more professional looking. vadania.com
Here are a few Amazon links to some of the tools and items similar to what I used during this build.
Stainless T-Nuts, (25 Pack), Pronged Tee Nut. (1/4"-20 x 7/16") https://a.co/d/hsTxSvK
Prime-Line 9001750 Machine Screws, Flat Head, Phillips Drive, 1/4 in-20 X 1/2 in, Grade 18-8 Stainless Steel, (25-pack) https://a.co/d/4UNmhjm
1/4-20 x 1/2" Flat Head Socket Cap Screws Countersunk Bolts, Allen Socket Drive, Stainless Steel 18-8 (304), Full Thread, Bright Finish, 20 PCS https://a.co/d/gKHrVkn
VADANIA 48" Industrial Grade Heavy Duty Drawer Slide with Lock #VD2576, 3" Widening Up to 343lb Load Capacity, 3-Fold Full Extension, Ball Bearing Lock-in & Lock-Out, Side Mount, 1-Pair https://a.co/d/3GAb1h6
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- TikTok www.tiktok.com/@thefurrminator -------------------- Facebook facebook.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator --------------------RV Propane Tank Cover Modification / Keep Your Hard Shell CoverThe Furrminator2023-05-28 | Before installing the Trailer Tray, I knew that accessing the propane tanks would be more difficult if I kept the hard shell propane tank cover. I decided to try a simple modification of making access doors on the plastic cover and this worked great. I am now able to keep the plastic propane tank cover and easily access the propane tanks at any time. This was a simple and easy modification that worked great. The cover also looks great, you can’t event tell there are doors on it until you are right at the camper.
Amazon link
2 Pack 40mmx31mm 4 Countersunk Holes Plastic 180 Degree Hinge Black Door Hinges https://a.co/d/eUe7dyj
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- TikTok www.tiktok.com/@thefurrminator -------------------- Facebook facebook.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator --------------------RV Water Hose HackThe Furrminator2023-04-11 | ...I Made a Jig to cut Pinewood Derby CarsThe Furrminator2023-02-20 | I like to make the Pinewood Derby cars into a wedge shape. To speed up the process and make them all the same, I made a jig for the table saw.How I prepare for a trip / PrepperThe Furrminator2023-02-09 | ...Stromberg’s Trailer Tray / Modified InstallThe Furrminator2023-02-05 | While trying to find a way to haul and store our generator without having to take up room in the bed of my truck, I decided to go with the Stromberg Carlson Trailer Tray. With the Trailer Tray I’m able to carry the generator or our Orca cooler on the travel trailer. As I was installing the Trailer Tray, I realized that with a short trailer tongue combined with the front of the trailer coming out over the tongue, I was left with very limited space. The answer to his problem was to leave the tray forward, so that the generator wouldn’t be too close to the front of the trailer, yet I moved the brackets back so that they wouldn’t interfere with the sway bars. I really thought that I was about to have to disassemble the Trailer Tray and return it but fortunately, my plan worked and it has been a fantastic addition to the Flagstaff travel trailer. I highly recommend the Stromberg Carlson Trailer Tray.
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- TikTok www.tiktok.com/@thefurrminator -------------------- Facebook facebook.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator --------------------RV Propane Tank Cover ModificationsThe Furrminator2023-02-04 | ...Repurposing an old refrigerator / chicken food binThe Furrminator2023-02-04 | Our old, small refrigerator stopped working so I decided to repurpose it as a storage bin for the chicken feed.DIY Blackstone Griddle RV Adjustable Bumper Mount UpdateThe Furrminator2023-01-26 | I had a couple questions in the comments on the original Blackstone Griddle mount video. This video addresses those questions and will hopefully help anyone that is going to make their own Blackstone Griddle mount.
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- TikTok www.tiktok.com/@thefurrminator -------------------- Facebook facebook.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator --------------------2022 Flagstaff Classic 832BWS Bunkhouse TourThe Furrminator2023-01-25 | While shopping for a new travel trailer in 2022, I watched a lot of video tours of older travel trailers to get an idea of what we wanted to purchase. After owning this travel trailer for almost a year, I felt I could provide a tour and give details that may be helpful to someone else that is shopping for a new or similar travel trailer. I hope this video is helpful. I have already made a few upgrades and there are more to come. Check my channel for the videos of any upgrades.
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- TikTok www.tiktok.com/@thefurrminator -------------------- Facebook facebook.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator --------------------Spypoint Trail Cam Powered by Harbor Freight Solar PanelThe Furrminator2023-01-17 | After the price of lithium batteries have gone up so drastically, I decided to spend a little extra money now in an attempt to save a lot of money later. I purchased this Harbor Freight solar panel and Harbor Freight solar charge regulator and then connected it to an old Mighty Max 12 volt battery that I had on hand. I had to order a 12 volt plug for the SPYPOINT camera and it is operating as it should.
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- TikTok www.tiktok.com/@thefurrminator -------------------- Facebook facebook.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator --------------------DIY Locking Drawer Slide InstallThe Furrminator2022-10-05 | I have been contemplating building a storage drawer for our RV for several months. One day I received an email from Vadania and they were offering me a set of drawer slides for a product review, if I had a project that called for drawer slides. This was my opportunity to put my thoughts into actions and get busy building the storage drawer. As I researched the Vadania website and I read up on their locking drawer slides, I could tell that these were quality slides and the slides that would fit my needs. Since I’m a creature of habit and always want the biggest and best, that’s exactly what I ordered…the biggest, most heavy duty drawer slide that was available on the website. These slides are definitely an overkill for the amount of weight / items that I will place on the drawer. I actually ordered the drawer slides and built the drawer to fit the slides. After completing the project, I am completely satisfied and impressed with the quality, durability and ease of installation. Vadania offers a quality product, the shipping was fast and though they were working with me for a product review, the customer service was top notch. Follow this link to check out all of the different drawer slides that Vadania has to offer, vadania.com
Amazon Links
Stainless T-Nuts, 1/4"-20 Inch, (25 Pack), Threaded Insert, Choose Size/Quantity, by Bolt Dropper, Pronged Tee Nut. (1/4"-20 x 7/16") https://a.co/d/hsTxSvK
Prime-Line 9001750 Machine Screws, Flat Head, Phillips Drive, 1/4 in-20 X 1/2 in, Grade 18-8 Stainless Steel, (25-pack) https://a.co/d/4UNmhjm
1/4-20 x 1/2" Flat Head Socket Cap Screws Countersunk Bolts, Allen Socket Drive, Stainless Steel 18-8 (304), Full Thread, Bright Finish, 20 PCS https://a.co/d/gKHrVkn
VADANIA 48" Industrial Grade Heavy Duty Drawer Slide with Lock #VD2576, 3" Widening Up to 343lb Load Capacity, 3-Fold Full Extension, Ball Bearing Lock-in & Lock-Out, Side Mount, 1-Pair https://a.co/d/3GAb1h6
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- TikTok www.tiktok.com/@thefurrminator -------------------- Facebook facebook.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator --------------------DIY Blackstone Adjustable RV Bumper MountThe Furrminator2022-08-23 | After purchasing our new travel trailer, I really wanted to attach the griddle to the bumper but I knew it would have to have some sort of height adjustments. The RV bumper receiver along with the drop hitch was the perfect solution and it works great. This project does need minimal welding and as long as you make sure that the parts being welded are square and straight, it should be level with the camper.
Below is a list of the items used in this project.
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- TikTok www.tiktok.com/@thefurrminator -------------------- Facebook facebook.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator --------------------2005 FORD F-250 KING Ranch Armrest UpholsteryThe Furrminator2022-08-13 | The leather in my 2005 King Ranch Ford F-250 still looks pretty good except for the two armrest. The drivers side armrest was the worst and it was so worn that it was uncomfortable to place your arm on it. I found these replacement armrest covers on Amazon, sold by Richmond Auto Upholstery, and I was surprised at how easy they were to replace. If this is an upgrade you want to attempt, make sure to place them in the sun for a couple hours or heat them with a hair dryer to make them a little more flexible. You definitely want to use a dry plastic grocery bag to make the cover slip on much easier.
Though they are listed as drivers side and passenger side, the armrest covers are the same and can fit on either side.
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- TikTok www.tiktok.com/@thefurrminator -------------------- Facebook facebook.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator --------------------DIY Bike Rack / Gooseneck Hitch Bike RackThe Furrminator2022-08-08 | We recently purchased a new travel trailer with less storage and I needed a little extra room to carry camping gear and the bikes the bed of my pickup. This truck had a gooseneck hitch in it when I purchased it but I’ve never had a need to use it. After making some measurements, I really thought I’d get the bikes up high enough to give me about 20” or so underneath the largest bike but I was pleasantly surprised when the bikes were completely above the side rails of the bed.
The bike rack is made from one 54” piece of 2.5” square tubing, two 12” pieces of 2.5” square tubing, and two 47” pieces of 1” square tubing. (The 2.5” tubing is about 1/4” thick metal and the 1” square tubing is 1/8” thick) The total cost of metal was $130.00.
I used my side grinder with a 24 grit grinding disc to grind the base of the rack ( bottom 4.5 inches ) so that it would fit inside the gooseneck hitch. I drilled the hole for the hitch pin with a step drill bit which worked great. After welding it all like I wanted it, I painted the rack with a can of black primer / paint combo. After it was all dry I used zip ties to attach pipe insulation to the 1” square tubing.
Paint / primer combo amzn.to/3bFHKLgFord F-250 Stuck in Defrost, Vacuum Leak, Check This FirstThe Furrminator2022-08-08 | This is an issue that has happened a few times on my 2005 Ford F-250 Super Duty 6.0. If you’re truck is stuck on defrost, check this hose first, it’s a simple fix. I’m not a mechanic so I can’t really offer any further solutions for a vacuum leak but hopefully this will solve the issue for you like it did for me.
Here are a few other upgrades or modifications that I have done to my truck with the Amazon link
Replaced the Driver and Passenger side arm rest (King Ranch leather) Passenger side amzn.to/3p4HKHP Drivers side amzn.to/3BKN8HC
New floor mats amzn.to/3d2vnsUBeachBUB Beach Umbrella ReviewThe Furrminator2022-05-11 | BeachBUB beach umbrella is a quality made umbrella, designed to stand up to the some of the windiest days on the beach. I started looking for a quality beach umbrella in May of 2021 when our umbrellas would not take the beating from the wind during a weekend at the beach. I found beacBUB online while doing an extensive search and, by the reviews, it looked to be the best umbrella for the beach. Now, after multiple trips to the beach, I am extremely satisfied with the quality and durability of this umbrella, so much that I will be replacing our other two umbrellas, seen in the video, with a beachBUB.
BeachBUB Umbrella Amazon Link amzn.to/3N60gJIA Fall Ride Through The Smoky Mountains. #greatsmokymountains #autumn #northcarolina #tennesseeThe Furrminator2021-10-27 | A Fall Ride Through The Smoky Mountains.DIY Concrete Pumpkin ProjectThe Furrminator2021-10-03 | A fun and easy project you can include the kids in on. We used plastic pales shaped like pumpkins or Jack-o’-lanterns and filled them with concrete. After 24 hour drying time the pumpkins were ready to be removed from the plastic pale. Quick Tip on How to Utilize The Outdoor Shower on Your RVThe Furrminator2021-08-04 | The outdoor shower that comes on many travel trailers is very handy but you’re limited on using them due to a very short hose. In order to utilize the shower inside a shower tent, I simply cut the original hose and added a 10 ft length of hose, allowing the shower to be used at a distance away from the RV.
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- Mailing Address Jeff Furr PO Box 624 Monroe, NC 28110 --------------------
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- Mailing Address Jeff Furr PO Box 624 Monroe, NC 28110 --------------------
TikTok www.tiktok.com/@thefurrminator -------------------- Facebook facebook.com/thefurrminator -------------------- Twitter twitter.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator --------------------Dry Camping, Easy Way To Fill A Fresh Water TankThe Furrminator2021-07-25 | After years of dry camping, I have learned to use as many short cuts as possible. Using a bilge pump to get the water into your fresh water tank makes life a lot easier and less back breaking. After watching this video, follow this link to my DIY Camp Shower video for a similar set up.
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- Facebook facebook.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator -------------------- Tiktok tiktok.com/t/ZTR6H3EH6 --------------------12 Easy DIY RV Upgrades and Inexpensive RV ModificationsThe Furrminator2021-06-29 | After purchasing our 2011 Flagstaff and using it a couple times, we quickly saw the need to add a few things that would make camping a little more enjoyable and life a little bit easier. These modifications and upgrades are simple for the DIYer and pretty inexpensive. I hope you find this video helpful and useful. Below are Amazon links for almost all items used in these upgrades.
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- Mailing Address Jeff Furr PO Box 624 Monroe, NC 28110 -------------------- Facebook facebook.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator --------------------How to spray VinylThe Furrminator2021-06-14 | Rather than spending way too much money to change seat covers, I decided to try my hand at spraying the vinyl seat on my Club Car. The Dupli-Color Vinyl and Fabric Specialty Coating worked great and it was very easy to apply. I now have a great looking seat that matches the back seat for under $20.00.
#duplicolor #vinylspraypaint #howtosprayvinyl
Dupli-Color Vinyl and Fabric Specialty Coating amzn.to/2SyW3rp
Scotch blue original multi surface painters tape amzn.to/3iU82uD
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- Facebook facebook.com/thefurrminator -------------------- Twitter twitter.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator -------------------- Snapchat snapchat.com/addGolf Cart Converted to Hunting Buggy Walk AroundThe Furrminator2021-06-10 | In an attempt to get to my hunting spots a little quieter and with less odor, I decided to get an electric hunting cart or hunting buggy. After pricing the new carts on the market and seeing that the older, popular brands were discontinued, I started looking into getting an electric golf cart and making the necessary modifications to make it my hunting buggy. This 2004 Club Car DS has been an excellent choice to fit my needs down at the hunting property. All of the medications made so far are in the $2,000.00 range and I’m hoping to soon make additional changes but a little more DIY and less expensive. Check out the Amazon links below to see the items that have already been installed and watch for my upcoming Hunting Buggy videos. #huntingcart #huntingbuggy #clubcar
2500 lb. Electric ATV/Utility Winch with Wireless Remote Control amzn.to/3gqjkDE
GMT Inc Club Car DS EZ Install Golf Cart Locking Glove Box Door Set in Carbon Fiber (FITS 1981 and UP DS Models ONLY) (Will NOT FIT Precedent Models) amzn.to/3pEpyEv
Huskey Parts Company Front Basket Dash Storage/Tray Organizer for Club Car Onward/Tempo Golf Cart amzn.to/3pBspOc
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- Facebook facebook.com/thefurrminator -------------------- Twitter twitter.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator -------------------- Snapchat snapchat.com/addDIY End Grain Wood FloorThe Furrminator2021-05-25 | After removing the walls and closet in this large room, I realized that I was going to need to try to match the existing wide plank pine floors with new boards or do something completely different by installing end grain wood flooring. I’ve been wanting to install an end grain floor for a while and I thought this would be the perfect opportunity to do it, without having to do a really large project.
Wet/Dry Shop Vac amzn.to/3vxr0e1The Carrier Wagon by Ray CreationsThe Furrminator2021-05-20 | The Carrier Wagon by Ray Creations is more than just a wagon, it is a tricked out hitch carrier with a 500 pound capacity that can be lifted by an electric jack. Load this wagon down, attach it to the hitch assembly and don’t worry about the weight, the electric jack will handle it from there. I can’t say enough about this carrier and the many uses for the lift on the hitch assembly. Adam, the owner is a down to earth, great guy with excellent customer service.
Here is an Amazon link to the beach wheels that I upgraded to. amzn.to/3IHRJffEasy DIY Christian FlagThe Furrminator2020-04-10 | Due to all the comments and requests, I have finally returned with another Rustic Flag video but this one has a little bit of a spin on it toward the end. I hope you enjoy the video.
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- Facebook facebook.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator --------------------DIY Electric Stabilizer Jack Motor RepairThe Furrminator2020-02-04 | The electric motor that operates the rear stabilizer jack on our travel trailer stopped working. I put off trying to repair it for a couple months because I’m just not that familiar with the inner workings of an electric motor. I was able to use the jack attachment with my drill to raise and lower the stabilizer jacks but I really wanted to repair the original motor. I finally worked up the nerve to give it a shot and it turned out to be a very minor repair. I’m sure I didn’t repair it like a professional would have, especially when I cut a part in half in order to remove it, but the repairs worked and it was extremely inexpensive.Hitchport Spring Bar Storage KitThe Furrminator2020-02-03 | Storage, or the lack of storage, has been something that I like to overcome with our travel trailer. Keeping the spring bars stowed away on the tongue of the travel trailer and not in a compartment is a big help in combating the storage issue. Now that the trailer hitch and the spring-bars are stored on the tongue, I have a little extra space for my containers, drop cords, water hoses and whatever else I need.
Hitchport Spring Bar Mount amzn.to/30zId7BOur Crazy GoatsThe Furrminator2019-06-08 | This isn't my normal type of video to post but I had to share it. These are our dwarf Pygmy goats and the first one isn’t quite sure how to come down the ramp.Paying It ForwardThe Furrminator2019-05-07 | I apologize for the rambling on, but I was very humbled when I received this cross from a guy that I have been communicating with on Facebook. This started as an idea that Michael Larkin, another Facebook friend, came up with and I hope it continues on. This cross was the project created by Justin Carver and forwarded to me. I will start working on my project ASAP and when I have it ready, it will be sent to another Facebook Friend. This was all started on the Rustic Flag Makers Page and I think it’s a great way to give and share ideas with others. Go check out the Rustic Flag Makers Page and the Wooden Flag Designers, Builders and Makers PageHow To Empty Your Black Water TankThe Furrminator2019-05-01 | After emptying the black water tank on my travel trailer, I discovered that there was a lot more sewage in the black water tank that wasn’t coming out. The Reverse Flush Valve is the perfect thing to flush out your black water tank.
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- Facebook facebook.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator -------------------- Tiktok tiktok.com/t/ZTR6H3EH6 --------------------Easier, Cleaner Way To Empty Your Black Water TankThe Furrminator2019-04-30 | I have used the standard, large sewer hose on our travel trailer for a while now. I grew up using the same type of hose back in the late 70’s and 80’s while helping my Dad empty the black water tank on his travel trailer. After using the Sewer Solution once, I knew that, with the exception of dry camping, I would never go back to the old big sewer hose. This video shows how easy and how well the Sewer Solution works but it doesn’t do it justice, you just have to try it to see how much better this system is compared to using the standard big bulky hose.
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- Facebook facebook.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator -------------------- Tiktok tiktok.com/t/ZTR6H3EH6 --------------------Pulse Light Flagpole Light ReviewThe Furrminator2019-04-21 | Here's a cool gadget to light up the flagpole on your RV, Fifth Wheel or Travel Trailer. The Pulse Light attaches easily, works great and is very bright with lots of light options on the free app. Check out the Pulse Light as well as flagpoles and other accessories at www.flagpolebuddy.com
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- Mailing Address Jeff Furr PO Box 624 Monroe, NC 28110 -------------------- Facebook facebook.com/thefurrminator -------------------- Twitter twitter.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator -------------------- Snapchat snapchat.com/addHarbor Freight Trailer Tongue Box InstallThe Furrminator2019-04-19 | After looking at a wide variety of metal boxes that I could have utilized on my travel trailer as a battery box, I decided on the Harbor Freight Trailer Tongue Box. This is a metal box and it fit just right on my travel trailer. The final cost of this box was $77.21 after using the 20% off coupon which was a lot less expensive than most of the boxes that I looked at. I removed the old battery tray that was welded between the frame on the trailer tongue and re-purposed it as a brace under my new battery box. I attached the battery box to the tongue of the trailer with four self tapping screws which held it very securely in place.
Ryobi P423 18V One+ Brushless 4-1/2" 10,400 RPM Grinder and Metal Cutter amzn.to/2Iw8Kwq
Dewalt DW8061B5 4 x 0.045 Inch Metal and Stainless Steel Cutting Wheels amzn.to/2DnCsiZ
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- Mailing Address Jeff Furr PO Box 624 Monroe, NC 28110 -------------------- Facebook facebook.com/thefurrminator -------------------- Twitter twitter.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator -------------------- Snapchat snapchat.com/addDIY Cargo Carrier For Your RV / Travel Trailer / Fifth WheelThe Furrminator2019-04-17 | In an attempt to make better use of the storage that I have on our travel trailer, I decided to make a Cargo Rack to attach to the bumper. I wanted to use two hitch receivers which will prevent the rack from rocking or moving and it will also increase the strength. For this project I used 2” angle iron, expanded metal and 2” square tubing. Check out the Amazon links below for other items or related items purchased for this project.
Haul Master 995481 5/8 in. Rotating Locking Hitch Pin with 2 Keys amzn.to/2DhOdHU
The below link is for a pack of six spray cans, you shouldn’t need more than two for a project of this size. Rust-Oleum 334128-6PK Stops Rust Turbo Spray Paint 6 Pack Gloss Black amzn.to/2XhtD1K
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- Facebook facebook.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator -------------------- Tiktok tiktok.com/t/ZTR6H3EH6 --------------------How To Store The Trailer Hitch On Your Travel TrailerThe Furrminator2019-04-05 | After moving things around in the storage compartment, to make room for the trailer hitch every time we go camping, I decided that I wanted to find a way to store the trailer hitch securely without taking up lots of room. I decided that I wanted to store it right on the tongue of the travel trailer and with a locking pin, it would be secure and out of the way. I welded an inexpensive receiver to the tongue and this worked perfectly.
Here are the links to the Receiver and 5/8” Lock Pin
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- Mailing Address Jeff Furr PO Box 624 Monroe, NC 28110 -------------------- Facebook facebook.com/thefurrminator -------------------- Twitter twitter.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator -------------------- Snapchat snapchat.com/addMud-skipper Twister Test RunThe Furrminator2019-03-29 | Here’s a short video of my first successful test run of the Mud-skipper Twister Lite on my Bass Tender 10.2 boat. I have a few kinks to work out but over all, this Harbor Freight Predator 212 runs great and the mud motor attachment works great. I hope you enjoy the video, I’ll have more boat related videos coming soon.
Here’s an Amazon link to the newest version of my boat amzn.to/2VqaHNY
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- Mailing Address Jeff Furr PO Box 624 Monroe, NC 28110 -------------------- Facebook facebook.com/thefurrminator -------------------- Twitter twitter.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator -------------------- Snapchat snapchat.com/addMud-skipper Twister Lite Build on a Harbor Freight PredatorThe Furrminator2019-03-28 | I have been working on my Water Quest 10.2 which is actually a Bass Tender 10.2. After making several modifications and only having a trolling motor to rely on to get me from point A to point B, I decided to shop around for a small boat motor. The Bass Tender is rated for a 7.5 HP motor and all the boat motors of that size seem to be very pricey. After watching several reviews on Mud Motors, I decided that was the way I wanted to go, still a little pricey but a cool option for this boat. I finally decided on the Mud-skipper Twister Lite, made lighter for a smaller boat and more in my price range. All I needed was a motor to attach it to and Harbor Freight had the perfect motor. First, I bought the Harbor Freight Predator 212 which is rated at 6.5 HP, then I ordered the Mud-skipper Twister Lite. After putting it all together, this thing is ready to go and I don't have to rely on my trolling motor to get me to and from my favorite fishing hole.
Here’s an Amazon link to the newest version of my boat amzn.to/2VqaHNY
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- Mailing Address Jeff Furr PO Box 624 Monroe, NC 28110 -------------------- Facebook facebook.com/thefurrminator -------------------- Twitter twitter.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator -------------------- Snapchat snapchat.com/addFlagPole Buddy Installation and ReviewThe Furrminator2019-02-28 | While looking for an easy way to display the American Flag while camping, I ran across the FlagPole Buddy. This system attaches easily to the ladder on your RV, Fifth Wheel or Travel Trailer and once you have the mounts installed, the FlagPole can be put up from ground level. Visit their website at http://www.flagpolebuddy.com for FlagPoles, mounts and accessories.Taking The Kids FishingThe Furrminator2019-02-01 | I was going through old videos, trying to find videos to delete and free up some storage. This video is from three different fishing trips last year, 2018, where I took our kids fishing. We were fishing on my Waterquest 10.2 boat, this boat is perfect for fishing with the kids.
Here’s an Amazon link to the newest version of my boat amzn.to/2VqaHNY
Go check out my website www.thefurrminator.com ------------------- Email thefurrminator@gmail.com -------------------- Mailing Address Jeff Furr PO Box 624 Monroe, NC 28110 -------------------- Facebook facebook.com/thefurrminator -------------------- Twitter twitter.com/thefurrminator -------------------- Instagram instagram.com/thefurrminator -------------------- Snapchat snapchat.com/addTable Saw Safety Tip / WARNING, Graphic VideoThe Furrminator2019-01-05 | I just wanted to take a minute to share with you a mistake that I made. I hope that this video will remind you to always be alert and take extra steps to be safe in and around the shop.